ARMV7: Versatile Express Coretile CortexA9x4 support

Adds support for the ARM quad-core Cortex-A9 processor

This system includes a motherboard(Versatile Express), daughterboard
(Coretile), and SOC(Cortex-A9 quad core).  The serial port, ethernet,
and flash systems work with these additions.  The naming convention
is:
   SOC -> CortexA9 quad core = ca9x4
   daughterboard -> Coretile = ct
   motherboard -> Versatile Express = vxp
This gives ca9x4_ct_vxp.c as the board support file.

Signed-off-by: Matt Waddel <matt.waddel@linaro.org>

11 files changed, 734 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 785fccf..a394ac9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -800,6 +800,10 @@ Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
 
 	SFFSDR		ARM926EJS
 
+Matt Waddel <matt.waddel@linaro.org>
+
+	ca9x4_ct_vxp	ARM ARMV7 (Quad Core)
+
 Prafulla Wadaskar <prafulla@marvell.com>
 
 	mv88f6281gtw_ge	ARM926EJS (Kirkwood SoC)
diff --git a/MAKEALL b/MAKEALL
index 1b506d6..abceccd 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -489,6 +489,7 @@ LIST_ARM11="			\
 #########################################################################
 LIST_ARMV7="		\
 	am3517_evm		\
+	ca9x4_ct_vxp		\
 	devkit8000		\
 	mx51evk			\
 	omap3_beagle		\
diff --git a/arch/arm/include/asm/arch-armv7/sysctrl.h b/arch/arm/include/asm/arch-armv7/sysctrl.h
new file mode 100644
index 0000000..4e45167
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv7/sysctrl.h
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _SYSCTRL_H_
+#define _SYSCTRL_H_
+
+/* System controller (SP810) register definitions */
+#define SP810_TIMER0_ENSEL	(1 << 15)
+#define SP810_TIMER1_ENSEL	(1 << 17)
+#define SP810_TIMER2_ENSEL	(1 << 19)
+#define SP810_TIMER3_ENSEL	(1 << 21)
+
+struct sysctrl {
+	u32 scctrl;		/* 0x000 */
+	u32 scsysstat;
+	u32 scimctrl;
+	u32 scimstat;
+	u32 scxtalctrl;
+	u32 scpllctrl;
+	u32 scpllfctrl;
+	u32 scperctrl0;
+	u32 scperctrl1;
+	u32 scperen;
+	u32 scperdis;
+	u32 scperclken;
+	u32 scperstat;
+	u32 res1[0x006];
+	u32 scflashctrl;	/* 0x04c */
+	u32 res2[0x3a4];
+	u32 scsysid0;		/* 0xee0 */
+	u32 scsysid1;
+	u32 scsysid2;
+	u32 scsysid3;
+	u32 scitcr;
+	u32 scitir0;
+	u32 scitir1;
+	u32 scitor;
+	u32 sccntctrl;
+	u32 sccntdata;
+	u32 sccntstep;
+	u32 res3[0x32];
+	u32 scperiphid0;	/* 0xfe0 */
+	u32 scperiphid1;
+	u32 scperiphid2;
+	u32 scperiphid3;
+	u32 scpcellid0;
+	u32 scpcellid1;
+	u32 scpcellid2;
+	u32 scpcellid3;
+};
+#endif /* _SYSCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-armv7/systimer.h b/arch/arm/include/asm/arch-armv7/systimer.h
new file mode 100644
index 0000000..e745e37
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv7/systimer.h
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _SYSTIMER_H_
+#define _SYSTIMER_H_
+
+/* AMBA timer register base address */
+#define SYSTIMER_BASE		0x10011000
+
+#define SYSHZ_CLOCK		1000000		/* Timers -> 1Mhz */
+#define SYSTIMER_RELOAD		0xFFFFFFFF
+#define SYSTIMER_EN		(1 << 7)
+#define SYSTIMER_32BIT		(1 << 1)
+
+struct systimer {
+	u32 timer0load;		/* 0x00 */
+	u32 timer0value;
+	u32 timer0control;
+	u32 timer0intclr;
+	u32 timer0ris;
+	u32 timer0mis;
+	u32 timer0bgload;
+	u32 timer1load;		/* 0x20 */
+	u32 timer1value;
+	u32 timer1control;
+	u32 timer1intclr;
+	u32 timer1ris;
+	u32 timer1mis;
+	u32 timer1bgload;
+};
+#endif /* _SYSTIMER_H_ */
diff --git a/arch/arm/include/asm/arch-armv7/wdt.h b/arch/arm/include/asm/arch-armv7/wdt.h
new file mode 100644
index 0000000..ee74c38
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv7/wdt.h
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2010
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _WDT_H_
+#define _WDT_H_
+
+/* Watchdog timer (SP805) register base address */
+#define WDT_BASE	0x100E5000
+
+#define WDT_EN		0x2
+#define WDT_RESET_LOAD	0x0
+
+struct wdt {
+	u32 wdogload;		/* 0x000 */
+	u32 wdogvalue;
+	u32 wdogcontrol;
+	u32 wdogintclr;
+	u32 wdogris;
+	u32 wdogmis;
+	u32 res1[0x2F9];
+	u32 wdoglock;		/* 0xC00 */
+	u32 res2[0xBE];
+	u32 wdogitcr;		/* 0xF00 */
+	u32 wdogitop;
+	u32 res3[0x35];
+	u32 wdogperiphid0;	/* 0xFE0 */
+	u32 wdogperiphid1;
+	u32 wdogperiphid2;
+	u32 wdogperiphid3;
+	u32 wdogpcellid0;
+	u32 wdogpcellid1;
+	u32 wdogpcellid2;
+	u32 wdogpcellid3;
+};
+
+#endif /* _WDT_H_ */
diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile
new file mode 100644
index 0000000..ee5c0d8
--- /dev/null
+++ b/board/armltd/vexpress/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= ca9x4_ct_vxp.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/ca9x4_ct_vxp.c
new file mode 100644
index 0000000..48dfc8c
--- /dev/null
+++ b/board/armltd/vexpress/ca9x4_ct_vxp.c
@@ -0,0 +1,220 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/systimer.h>
+#include <asm/arch/sysctrl.h>
+#include <asm/arch/wdt.h>
+
+static ulong timestamp;
+static ulong lastdec;
+
+static struct wdt *wdt_base = (struct wdt *)WDT_BASE;
+static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE;
+static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE;
+
+static void flash__init(void);
+static void vexpress_timer_init(void);
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress(int progress)
+{
+	printf("Boot reached stage %d\n", progress);
+}
+#endif
+
+static inline void delay(ulong loops)
+{
+	__asm__ volatile ("1:\n"
+		"subs %0, %1, #1\n"
+		"bne 1b" : "=r" (loops) : "0" (loops));
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+	gd->bd->bi_arch_number = MACH_TYPE_VEXPRESS;
+	gd->flags = 0;
+
+	icache_enable();
+	flash__init();
+	vexpress_timer_init();
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}
+
+static void flash__init(void)
+{
+	/* Setup the sytem control register to allow writing to flash */
+	writel(readl(&sysctrl_base->scflashctrl) | VEXPRESS_FLASHPROG_FLVPPEN,
+	       &sysctrl_base->scflashctrl);
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = get_ram_size(PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+}
+
+int timer_init(void)
+{
+	return 0;
+}
+
+/*
+ * Start timer:
+ *    Setup a 32 bit timer, running at 1KHz
+ *    Versatile Express Motherboard provides 1 MHz timer
+ */
+static void vexpress_timer_init(void)
+{
+	/*
+	 * Set clock frequency in system controller:
+	 *   VEXPRESS_REFCLK is 32KHz
+	 *   VEXPRESS_TIMCLK is 1MHz
+	 */
+	writel(SP810_TIMER0_ENSEL | SP810_TIMER1_ENSEL |
+	       SP810_TIMER2_ENSEL | SP810_TIMER3_ENSEL |
+	       readl(&sysctrl_base->scctrl), &sysctrl_base->scctrl);
+
+	/*
+	 * Set Timer0 to be:
+	 *   Enabled, free running, no interrupt, 32-bit, wrapping
+	 */
+	writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
+	writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
+	writel(SYSTIMER_EN | SYSTIMER_32BIT | \
+	       readl(&systimer_base->timer0control), \
+	       &systimer_base->timer0control);
+
+	reset_timer_masked();
+}
+
+/* Use the ARM Watchdog System to cause reset */
+void reset_cpu(ulong addr)
+{
+	writeb(WDT_EN, &wdt_base->wdogcontrol);
+	writel(WDT_RESET_LOAD, &wdt_base->wdogload);
+	while (1)
+		;
+}
+
+/*
+ * Delay x useconds AND perserve advance timstamp value
+ *     assumes timer is ticking at 1 msec
+ */
+void udelay(ulong usec)
+{
+	ulong tmo, tmp;
+
+	tmo = usec / 1000;
+	tmp = get_timer(0);	/* get current timestamp */
+
+	/*
+	 * If setting this forward will roll time stamp	then
+	 * reset "advancing" timestamp to 0 and set lastdec value
+	 * otherwise set the advancing stamp to the wake up time
+	 */
+	if ((tmo + tmp + 1) < tmp)
+		reset_timer_masked();
+	else
+		tmo += tmp;
+
+	while (get_timer_masked() < tmo)
+		; /* loop till wakeup event */
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+void reset_timer_masked(void)
+{
+	lastdec = readl(&systimer_base->timer0value) / 1000;
+	timestamp = 0;
+}
+
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+ulong get_timer_masked(void)
+{
+	ulong now = readl(&systimer_base->timer0value) / 1000;
+
+	if (lastdec >= now) {	/* normal mode (non roll) */
+		timestamp += lastdec - now;
+	} else {		/* count down timer overflowed */
+		/*
+		 * nts = ts + ld - now
+		 * ts = old stamp, ld = time before passing through - 1
+		 * now = amount of time after passing though - 1
+		 * nts = new "advancing time stamp"
+		 */
+		timestamp += lastdec + SYSTIMER_RELOAD - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void lowlevel_init(void)
+{
+}
+
+ulong get_board_rev(void){
+	return readl((u32 *)SYS_ID);
+}
diff --git a/board/armltd/vexpress/config.mk b/board/armltd/vexpress/config.mk
new file mode 100644
index 0000000..2d797d7
--- /dev/null
+++ b/board/armltd/vexpress/config.mk
@@ -0,0 +1,23 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Linux-Kernel is expected to be at 0x60008000
+#
+TEXT_BASE = 0x60800000
+LDSCRIPT := $(SRCTREE)/board/armltd/vexpress/u-boot.lds
diff --git a/board/armltd/vexpress/u-boot.lds b/board/armltd/vexpress/u-boot.lds
new file mode 100644
index 0000000..5ac62f2
--- /dev/null
+++ b/board/armltd/vexpress/u-boot.lds
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+	. = ALIGN(4);
+	.text	:
+	{
+		arch/arm/cpu/armv7/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata))) }
+
+	. = ALIGN(4);
+	.data : { *(.data)
+	__datarel_start = .;
+		*(.data.rel)
+	__datarelrolocal_start = .;
+		*(.data.rel.ro.local)
+	__datarellocal_start = .;
+		*(.data.rel.local)
+	__datarelro_start = .;
+		*(.data.rel.ro)
+	}
+
+	__got_start = .;
+	. = ALIGN(4);
+	.got : { *(.got) }
+	__got_end = .;
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/boards.cfg b/boards.cfg
index 62ffa42..38fa570 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -252,6 +252,7 @@ imx27lite	arm	arm926ejs	imx27lite	logicpd		mx27
 magnesium	arm	arm926ejs	imx27lite	logicpd		mx27
 omap5912osk	arm	arm926ejs	-		ti		omap
 edminiv2	arm	arm926ejs	-		LaCie		orion5x
+ca9x4_ct_vxp	arm	armv7		vexpress	armltd
 omap3_overo	arm	armv7		overo		-		omap3
 omap3_pandora	arm	armv7		pandora		-		omap3
 omap3_zoom1	arm	armv7		zoom1		logicpd		omap3
diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
new file mode 100644
index 0000000..5547d55
--- /dev/null
+++ b/include/configs/ca9x4_ct_vxp.h
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ *   configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Board info register */
+#define SYS_ID				0x10000000
+#define CONFIG_REVISION_TAG		1
+
+/* High Level Configuration Options */
+#define CONFIG_ARMV7			1
+
+#define CONFIG_SYS_MEMTEST_START	0x60000000
+#define CONFIG_SYS_MEMTEST_END		0x20000000
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_L2_OFF			1
+#define CONFIG_INITRD_TAG		1
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+#define SCTL_BASE			0x10001000
+#define VEXPRESS_FLASHPROG_FLVPPEN	(1 << 0)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X			1
+#define CONFIG_SMC911X_32_BIT		1
+#define CONFIG_SMC911X_BASE		0x4E000000
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		24000000
+#define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
+					 (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX		0
+
+#define CONFIG_BAUDRATE			38400
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0		0x10009000
+#define CONFIG_SYS_SERIAL1		0x1000A000
+
+/* Command line configuration */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_RUN
+
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_MMC			1
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* Miscellaneous configurable options */
+#undef	CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_LOAD_ADDR		0x60008000	/* load address */
+#define LINUX_BOOT_PARAM_ADDR		0x60000200
+#define CONFIG_BOOTDELAY		2
+
+/* Stack sizes are set up in start.S using the settings below */
+#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ		(4 * 1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ		(4 * 1024)	/* FIQ stack */
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			0x60000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_2			0x80000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE		0x20000000	/* 512 MB */
+#define PHYS_SDRAM_2_SIZE		0x20000000	/* 512 MB */
+
+/* additions for new relocation code */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_END		0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_INIT_RAM_END - \
+					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_GBL_DATA_OFFSET
+
+/* Basic environment settings */
+#define CONFIG_BOOTCOMMAND		"run bootflash;"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+		"loadaddr=0x80008000\0" \
+		"initrd=0x61000000\0" \
+		"kerneladdr=0x44100000\0" \
+		"initrdaddr=0x44800000\0" \
+		"maxinitrd=0x1800000\0" \
+		"console=ttyAMA0,38400n8\0" \
+		"dram=1024M\0" \
+		"root=/dev/sda1 rw\0" \
+		"mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
+			"24M@0x2000000(initrd)\0" \
+		"flashargs=setenv bootargs root=${root} console=${console} " \
+			"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
+			"devtmpfs.mount=0  vmalloc=256M\0" \
+		"bootflash=run flashargs; " \
+			"cp ${initrdaddr} ${initrd} ${maxinitrd}; " \
+			"bootm ${kerneladdr} ${initrd}\0"
+
+/* FLASH and environment organization */
+#define PHYS_FLASH_SIZE			0x04000000	/* 64MB */
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_SIZE		0x04000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	2
+#define CONFIG_SYS_FLASH_BASE0		0x40000000
+#define CONFIG_SYS_FLASH_BASE1		0x44000000
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE0
+
+/* Timeout values in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Write Timeout */
+
+/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
+#define CONFIG_SYS_MAX_FLASH_SECT	259		/* Max sectors */
+#define FLASH_MAX_SECTOR_SIZE		0x00040000	/* 256 KB sectors */
+
+/* Room required on the stack for the environment data */
+#define CONFIG_ENV_SIZE			FLASH_MAX_SECTOR_SIZE
+
+/*
+ * Amount of flash used for environment:
+ * We don't know which end has the small erase blocks so we use the penultimate
+ * sector location for the environment
+ */
+#define CONFIG_ENV_SECT_SIZE		FLASH_MAX_SECTOR_SIZE
+#define CONFIG_ENV_OVERWRITE		1
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - \
+					(2 * CONFIG_ENV_SECT_SIZE))
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE1 + \
+					 CONFIG_ENV_OFFSET)
+#define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE0, \
+					  CONFIG_SYS_FLASH_BASE1 }
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT		"VExpress# "
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_CMD_SOURCE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING		1
+#define CONFIG_SYS_MAXARGS		16	/* max command args */
+
+#endif