diff options
author | Becky Bruce <becky.bruce@freescale.com> | 2008-11-06 17:37:35 -0600 |
---|---|---|
committer | Jon Loeliger <jdl@freescale.com> | 2008-11-10 10:10:05 -0600 |
commit | 3111d32c494e8251b90917447796a7206b757e1e (patch) | |
tree | 774785cc25baf8f118d2539e1d353d3ffd76afd7 | |
parent | c759a01a0022de9378a3a761f49786f87684c916 (diff) | |
download | bootable_bootloader_goldelico_gta04-3111d32c494e8251b90917447796a7206b757e1e.zip bootable_bootloader_goldelico_gta04-3111d32c494e8251b90917447796a7206b757e1e.tar.gz bootable_bootloader_goldelico_gta04-3111d32c494e8251b90917447796a7206b757e1e.tar.bz2 |
mpc8641: Support 36-bit physical addressing
This patch creates a memory map with all the devices
in 36-bit physical space, in addition to the 32-bit map.
The CCSR relocation is moved (again, sorry) to
allow for the physical address to be 36 bits - this
requires translation to be enabled. With 36-bit physical
addressing enabled, we are no longer running with VA=PA
translations. This means we have to distinguish between
the two in the config file. The existing region name is
used to indicate the virtual address, and a _PHYS variety
is created to represent the physical address.
Large physical addressing is not enabled by default.
Set CONFIG_PHYS_64BIT in the config file to turn this on.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
-rw-r--r-- | board/freescale/mpc8641hpcn/law.c | 13 | ||||
-rw-r--r-- | cpu/mpc86xx/start.S | 44 | ||||
-rw-r--r-- | doc/README.mpc8641hpcn | 24 | ||||
-rw-r--r-- | include/configs/MPC8641HPCN.h | 164 |
4 files changed, 192 insertions, 53 deletions
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c index 669a091..bd357b8 100644 --- a/board/freescale/mpc8641hpcn/law.c +++ b/board/freescale/mpc8641hpcn/law.c @@ -31,12 +31,13 @@ * LAW(Local Access Window) configuration: * * 0x0000_0000 0x7fff_ffff DDR 2G - * if PCI + * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M - * else if RIO + * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) * 0x8000_0000 0x9fff_ffff RapidIO 512M * endif + * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT) * 0xffc0_0000 0xffc0_ffff PCI1 IO 64K * 0xffc1_0000 0xffc1_ffff PCI2 IO 64K * 0xffe0_0000 0xffef_ffff CCSRBAR 1M @@ -53,15 +54,15 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), #endif #ifdef CONFIG_PCI - SET_LAW(CONFIG_SYS_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1), SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2), #elif defined(CONFIG_RIO) SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), #endif - SET_LAW(PIXIS_BASE, LAW_SIZE_64K, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_8M, LAW_TRGT_IF_LBC), + SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 0aa8a4f..efd654c 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -209,11 +209,6 @@ boot_warm: sync #endif -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) - /* setup ccsrbar now while we're in real mode */ - bl setup_ccsrbar -#endif - /* * Calculate absolute address in FLASH and jump there *------------------------------------------------------*/ @@ -267,6 +262,10 @@ addr_trans_enabled: sync #endif +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) + bl setup_ccsrbar +#endif + /* set up the stack pointer in our newly created * cache-ram (r1) */ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h @@ -414,6 +413,26 @@ early_bats: mtspr DBAT6L, r4 mtspr DBAT6U, r3 isync + +#if(CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) + /* IBAT 7 */ + lis r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@h + ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@l + lis r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@h + ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@l + mtspr IBAT7L, r4 + mtspr IBAT7U, r3 + isync + + /* DBAT 7 */ + lis r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@h + ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@l + lis r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@h + ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@l + mtspr DBAT7L, r4 + mtspr DBAT7U, r3 + isync +#endif blr .globl clear_tlbs @@ -860,17 +879,20 @@ setup_ccsrbar: lis r4, CONFIG_SYS_CCSRBAR_DEFAULT@h ori r4, r4, CONFIG_SYS_CCSRBAR_DEFAULT@l - lis r5, CONFIG_SYS_CCSRBAR@h - ori r5, r5, CONFIG_SYS_CCSRBAR@l - srwi r6,r5,12 - stw r6, 0(r4) + lis r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@h + ori r5, r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@l + srwi r5,r5,12 + li r6, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + rlwimi r5,r6,20,8,11 + stw r5, 0(r4) /* Store physical value of CCSR */ isync - lis r5, 0xffff - ori r5,r5,0xf000 + lis r5, TEXT_BASE@h + ori r5,r5,TEXT_BASE@l lwz r5, 0(r5) isync + /* Use VA of CCSR to do read */ lis r3, CONFIG_SYS_CCSRBAR@h lwz r5, CONFIG_SYS_CCSRBAR@l(r3) isync diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn index 0a6e715..5ac39e6 100644 --- a/doc/README.mpc8641hpcn +++ b/doc/README.mpc8641hpcn @@ -113,6 +113,9 @@ To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): ------------- NOTE: RIO and PCI are mutually exclusive, so they share an address +For 32-bit u-boot, devices are mapped so that the virtual address == +the physical address, and the map looks liks this: + Memory Range Device Size ------------ ------ ---- 0x0000_0000 0x7fff_ffff DDR 2G @@ -127,6 +130,27 @@ NOTE: RIO and PCI are mutually exclusive, so they share an address 0xffc1_0000 0xffc1_ffff PCI2/PEX2 IO 64K 0xef80_0000 0xefff_ffff Flash 8M +For 36-bit-enabled u-boot, the virtual map is the same as for 32-bit. +However, the physical map is altered to reside in 36-bit space, as follows. +Addresses are no longer mapped with VA == PA. All accesses from +software use the VA; the PA is only used for setting up windows +and mappings. Note that the low 32 bits are the same as the VA above; +only the top 4 bits vary: + + Memory Range Device Size + ------------ ------ ---- + 0x0_0000_0000 0x0_7fff_ffff DDR 2G + 0xc_8000_0000 0xc_9fff_ffff RIO MEM 512M + 0xc_8000_0000 0xc_9fff_ffff PCI1/PEX1 MEM 512M + 0xc_a000_0000 0xc_bfff_ffff PCI2/PEX2 MEM 512M + 0xf_ffe0_0000 0xf_ffef_ffff CCSR 1M + 0xf_ffdf_0000 0xf_ffdf_7fff PIXIS 8K + 0xf_ffdf_8000 0xf_ffdf_ffff CF 8K + 0x0_f840_0000 0xf_f840_3fff Stack space 32K + 0xf_ffc0_0000 0xf_ffc0_ffff PCI1/PEX1 IO 64K + 0xf_ffc1_0000 0xf_ffc1_ffff PCI2/PEX2 IO 64K + 0xf_ef80_0000 0xf_efff_ffff Flash 8M + 5. pixis_reset command -------------------- A new command, "pixis_reset", is introduced to reset mpc8641hpcn board diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index ec3d112..c84ae5e 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -38,6 +38,7 @@ #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ #define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ +/*#define CONFIG_PHYS_64BIT 1*/ /* Place devices in 36-bit space */ #ifdef RUN_DIAG #define CONFIG_SYS_DIAG_ADDR CONFIG_SYS_FLASH_BASE @@ -92,6 +93,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_END 0x00400000 /* + * With the exception of PCI Memory and Rapid IO, most devices will simply + * add CONFIG_SYS_PHYS_ADDR_HIGH to the front of the 32-bit VA to get the PA + * when 36-bit is enabled. When 36-bit is not enabled, these bits are 0. + */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f00000000ULL +#else +#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0 +#endif + +/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ @@ -99,6 +111,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ +/* Physical addresses */ +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf +#else +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 +#endif + #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) #define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) @@ -160,23 +180,31 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_FLASH_BASE 0xef800000 /* start of FLASH 8M */ +#define CONFIG_SYS_FLASH_BASE_PHYS (CONFIG_SYS_FLASH_BASE \ + | CONFIG_SYS_PHYS_ADDR_HIGH) + #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} /* Convert an address into the right format for the BR registers */ +#ifdef CONFIG_PHYS_64BIT +#define BR_PHYS_ADDR(x) ((unsigned long)((x & 0x0ffff8000ULL) | \ + ((x & 0x300000000ULL) >> 19))) +#else #define BR_PHYS_ADDR(x) (x & 0xffff8000) +#endif -#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) \ - | 0x00001001) /* port size 16bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff806ff7 /* 8MB Boot Flash area*/ +#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ + | 0x00001001) /* port size 16bit */ +#define CONFIG_SYS_OR0_PRELIM 0xff806ff7 /* 8MB Boot Flash area*/ -#define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(CF_BASE) \ - | 0x00001001) /* port size 16bit */ -#define CONFIG_SYS_OR2_PRELIM 0xffffeff7 /* 32k Compact Flash */ +#define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(CF_BASE_PHYS) \ + | 0x00001001) /* port size 16bit */ +#define CONFIG_SYS_OR2_PRELIM 0xffffeff7 /* 32k Compact Flash */ -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE) \ - | 0x00000801) /* port size 8bit */ -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32k PIXIS area*/ +#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) \ + | 0x00000801) /* port size 8bit */ +#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32k PIXIS area*/ /* * The LBC_BASE is the base of the region that contains the PIXIS and the CF. @@ -184,9 +212,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * required for the smallest BAT mapping, so there's a 64k hole. */ #define CONFIG_SYS_LBC_BASE 0xffde0000 +#define CONFIG_SYS_LBC_BASE_PHYS (CONFIG_SYS_LBC_BASE \ + | CONFIG_SYS_PHYS_ADDR_HIGH) #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE (CONFIG_SYS_LBC_BASE + 0x00010000) +#define PIXIS_BASE_PHYS (CONFIG_SYS_LBC_BASE_PHYS + 0x00010000) #define PIXIS_SIZE 0x00008000 /* 32k */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ @@ -206,6 +237,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Compact flash shares a BAT with PIXIS; make sure they're contiguous */ #define CF_BASE (PIXIS_BASE + PIXIS_SIZE) +#define CF_BASE_PHYS (PIXIS_BASE_PHYS + PIXIS_SIZE) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ @@ -295,7 +327,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * RapidIO MMU */ #define CONFIG_SYS_RIO_MEM_BASE 0x80000000 /* base address */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_RIO_MEM_PHYS 0x0000000c00000000ULL +#else #define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE +#endif #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ /* @@ -303,10 +339,16 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Addresses are mapped 1-1. */ #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCI1_MEM_PHYS 0x0000000c00000000ULL +#else #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#endif #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000 +#define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCI1_IO_PHYS (CONFIG_SYS_PCI1_IO_VIRT \ + | CONFIG_SYS_PHYS_ADDR_HIGH) #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64K */ /* For RTL8139 */ @@ -315,9 +357,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PCI2_MEM_BASE (CONFIG_SYS_PCI1_MEM_BASE \ + CONFIG_SYS_PCI1_MEM_SIZE) -#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE +#define CONFIG_SYS_PCI2_MEM_PHYS (CONFIG_SYS_PCI1_MEM_PHYS \ + + CONFIG_SYS_PCI1_MEM_SIZE) #define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI2_IO_VIRT (CONFIG_SYS_PCI1_IO_VIRT \ + + CONFIG_SYS_PCI1_IO_SIZE) #define CONFIG_SYS_PCI2_IO_PHYS (CONFIG_SYS_PCI1_IO_PHYS \ + CONFIG_SYS_PCI1_IO_SIZE) #define CONFIG_SYS_PCI2_IO_SIZE CONFIG_SYS_PCI1_IO_SIZE @@ -349,10 +394,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1 /*PCIE video card used*/ -#define VIDEO_IO_OFFSET CONFIG_SYS_PCI2_IO_PHYS +#define VIDEO_IO_OFFSET CONFIG_SYS_PCI2_IO_VIRT /*PCI video card used*/ -/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_PHYS*/ +/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ /* video */ #define CONFIG_VIDEO @@ -365,7 +410,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ATI_RADEON_FB #define CONFIG_VIDEO_LOGO /*#define CONFIG_CONSOLE_CURSOR*/ -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_PHYS +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_VIRT #endif #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ @@ -419,6 +464,21 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* CONFIG_TSEC_ENET */ +/* Contort an addr into the format needed for BATs */ +#ifdef CONFIG_PHYS_64BIT +#define BAT_PHYS_ADDR(x) ((unsigned long) \ + ((x & 0x00000000ffffffffULL) | \ + ((x & 0x0000000e00000000ULL) >> 24) | \ + ((x & 0x0000000100000000ULL) >> 30))) +#else +#define BAT_PHYS_ADDR(x) (x) +#endif + + +/* Put high physical address bits into the BAT format */ +#define PHYS_HIGH_TO_BXPN(x) ((x & 0x0000000e) << 8) +#define PHYS_HIGH_TO_BX(x) ((x & 0x00000001) << 2) + /* * BAT0 DDR */ @@ -430,12 +490,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * BAT1 LBC (PIXIS/CF) */ -#define CONFIG_SYS_DBAT1L (CONFIG_SYS_LBC_BASE | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \ + | BATL_PP_RW | BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT1U (CONFIG_SYS_LBC_BASE | BATU_BL_128K \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_LBC_BASE | BATL_PP_RW \ - | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \ + | BATL_PP_RW | BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U /* if CONFIG_PCI: @@ -444,14 +505,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * BAT2 Rapidio Memory */ #ifdef CONFIG_PCI -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_1G \ +#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \ + | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_1G \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \ + | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U #else /* CONFIG_RIO */ +#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \ + | BATL_PP_RW | BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M \ + | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \ + | BATL_PP_RW | BATL_CACHEINHIBIT) + #define CONFIG_SYS_DBAT2L (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT2U (CONFIG_SYS_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) @@ -461,22 +531,43 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * BAT3 CCSR Space + * This BAT is used early; don't use any macros with ULL - use HIGH/LOW pairs + * instead. The assembler chokes on ULL. */ -#define CONFIG_SYS_DBAT3L ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT3L (CONFIG_SYS_CCSRBAR_PHYS_LOW \ + | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ + | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ + | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS \ | BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR_PHYS_LOW \ + | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ + | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ + | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) +#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATU_BL_1M | BATU_VS | BATU_VP) +#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU +#endif + /* * BAT4 PCI1_IO and PCI2_IO */ -#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_PHYS | BATU_BL_128K \ +#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \ + | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_128K \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \ + | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U /* @@ -490,12 +581,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * BAT6 FLASH */ -#define CONFIG_SYS_DBAT6L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ + | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT6U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS \ | BATU_VP) -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW \ - | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ + | BATL_PP_RW | BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U /* Map the last 1M of flash where we're running from reset */ @@ -652,8 +744,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "ramdiskfile=your.ramdisk.u-boot\0" \ "fdtaddr=c00000\0" \ "fdtfile=mpc8641_hpcn.dtb\0" \ - "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ - "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ + "en-wd=mw.b ffdf0010 0x08; echo -expect:- 08; md.b ffdf0010 1\0" \ + "dis-wd=mw.b ffdf0010 0x00; echo -expect:- 00; md.b ffdf0010 1\0" \ "maxcpus=2" |