diff options
author | wdenk <wdenk> | 2003-07-16 21:53:01 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2003-07-16 21:53:01 +0000 |
commit | 945af8d723a29e9b6289d84250745ed0dc16fc81 (patch) | |
tree | 6798d0b717c05b01742df0c410038c702b8a1979 /README | |
parent | cb4dbb7bbc271f988e14ec353a5e86d7f10e1da0 (diff) | |
download | bootable_bootloader_goldelico_gta04-945af8d723a29e9b6289d84250745ed0dc16fc81.zip bootable_bootloader_goldelico_gta04-945af8d723a29e9b6289d84250745ed0dc16fc81.tar.gz bootable_bootloader_goldelico_gta04-945af8d723a29e9b6289d84250745ed0dc16fc81.tar.bz2 |
* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
* Add support for MGT5100 and MPC5200 processors
Diffstat (limited to 'README')
-rw-r--r-- | README | 36 |
1 files changed, 18 insertions, 18 deletions
@@ -206,7 +206,7 @@ Directory Hierarchy: - board/mvs1 Files specific to MVS1 boards - board/nx823 Files specific to NX823 boards - board/oxc Files specific to OXC boards -- board/omap1510inn +- board/omap1510inn Files specific to OMAP 1510 Innovator boards - board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards - board/pm826 Files specific to PM826 boards @@ -913,35 +913,35 @@ The following options need to be configured: - I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C These enable I2C serial bus commands. Defining either of - (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will - include the appropriate I2C driver for the selected cpu. + (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will + include the appropriate I2C driver for the selected cpu. - This will allow you to use i2c commands at the u-boot - command line (as long as you set CFG_CMD_I2C in + This will allow you to use i2c commands at the u-boot + command line (as long as you set CFG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c based realtime clock chips. See common/cmd_i2c.c for a description of the command line interface. - CONFIG_HARD_I2C selects the CPM hardware driver for I2C. + CONFIG_HARD_I2C selects the CPM hardware driver for I2C. - CONFIG_SOFT_I2C configures u-boot to use a software (aka + CONFIG_SOFT_I2C configures u-boot to use a software (aka bit-banging) driver instead of CPM or similar hardware support for I2C. - There are several other quantities that must also be + There are several other quantities that must also be defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C. In both cases you will need to define CFG_I2C_SPEED - to be the frequency (in Hz) at which you wish your i2c bus - to run and CFG_I2C_SLAVE to be the address of this node (ie - the cpu's i2c node address). - + to be the frequency (in Hz) at which you wish your i2c bus + to run and CFG_I2C_SLAVE to be the address of this node (ie + the cpu's i2c node address). + Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c) sets the cpu up as a master node and so its address should therefore be cleared to 0 (See, eg, MPC823e User's Manual - p.16-473). So, set CFG_I2C_SLAVE to 0. + p.16-473). So, set CFG_I2C_SLAVE to 0. - That's all that's required for CONFIG_HARD_I2C. + That's all that's required for CONFIG_HARD_I2C. If you use the software i2c interface (CONFIG_SOFT_I2C) then the following macros need to be defined (examples are @@ -999,15 +999,15 @@ The following options need to be configured: eg: #define I2C_SCL(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL + else immr->im_cpm.cp_pbdat &= ~PB_SCL I2C_DELAY This delay is invoked four times per clock cycle so this controls the rate of data transfer. The data rate thus is 1 / (I2C_DELAY * 4). Often defined to be something - like: - + like: + #define I2C_DELAY udelay(2) CFG_I2C_INIT_BOARD @@ -1862,7 +1862,7 @@ configurations; the following names are supported: GENIETV_config TQM823L_config PIP405_config GEN860T_config EBONY_config FPS860L_config ELPT860_config cmi_mpc5xx_config NETVIA_config - at91rm9200dk_config omap1510inn_config + at91rm9200dk_config omap1510inn_config Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for |