added boot script files to repository

1 files changed, 0 insertions, 818 deletions

diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
deleted file mode 100644
index 0d8ef23..0000000
--- a/board/cpc45/pd67290.c
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************
- *
- * Lots of code copied from:
- *
- * i82365.c 1.352 - Linux driver for Intel 82365 and compatible
- * PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers.
- * (C) 1999 David A. Hinds <dahinds@users.sourceforge.net>
- */
-
-#include <common.h>
-
-#ifdef CONFIG_I82365
-
-#include <command.h>
-#include <pci.h>
-#include <pcmcia.h>
-#include <asm/io.h>
-
-#include <pcmcia/ss.h>
-#include <pcmcia/i82365.h>
-#include <pcmcia/yenta.h>
-#include <pcmcia/cirrus.h>
-
-static struct pci_device_id supported[] = {
-	{PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
-	{0, 0}
-};
-
-#define CYCLE_TIME	120
-
-#ifdef DEBUG
-static void i82365_dump_regions (pci_dev_t dev);
-#endif
-
-typedef struct socket_info_t {
-	pci_dev_t	dev;
-	u_short		bcr;
-	u_char		pci_lat, cb_lat, sub_bus, cache;
-	u_int		cb_phys;
-
-	socket_cap_t	cap;
-	u_short		type;
-	u_int		flags;
-	cirrus_state_t	c_state;
-} socket_info_t;
-
-/* These definitions must match the pcic table! */
-typedef enum pcic_id {
-	IS_PD6710, IS_PD672X, IS_VT83C469
-} pcic_id;
-
-typedef struct pcic_t {
-	char *name;
-} pcic_t;
-
-static pcic_t pcic[] = {
-	{" Cirrus PD6710: "},
-	{" Cirrus PD672x: "},
-	{" VIA VT83C469: "},
-};
-
-static socket_info_t socket;
-static socket_state_t state;
-static struct pccard_mem_map mem;
-static struct pccard_io_map io;
-
-/*====================================================================*/
-
-/* Some PCI shortcuts */
-
-static int pci_readb (socket_info_t * s, int r, u_char * v)
-{
-	return pci_read_config_byte (s->dev, r, v);
-}
-static int pci_writeb (socket_info_t * s, int r, u_char v)
-{
-	return pci_write_config_byte (s->dev, r, v);
-}
-static int pci_readw (socket_info_t * s, int r, u_short * v)
-{
-	return pci_read_config_word (s->dev, r, v);
-}
-static int pci_writew (socket_info_t * s, int r, u_short v)
-{
-	return pci_write_config_word (s->dev, r, v);
-}
-
-/*====================================================================*/
-
-#define cb_readb(s)		readb((s)->cb_phys + 1)
-#define cb_writeb(s, v)		writeb(v, (s)->cb_phys)
-#define cb_writeb2(s, v)	writeb(v, (s)->cb_phys + 1)
-#define cb_readl(s, r)		readl((s)->cb_phys + (r))
-#define cb_writel(s, r, v)	writel(v, (s)->cb_phys + (r))
-
-
-static u_char i365_get (socket_info_t * s, u_short reg)
-{
-	u_char val;
-#ifdef CONFIG_PCMCIA_SLOT_A
-	int slot = 0;
-#else
-	int slot = 1;
-#endif
-
-	val = I365_REG (slot, reg);
-
-	cb_writeb (s, val);
-	val = cb_readb (s);
-
-	debug ("i365_get slot:%x reg: %x val: %x\n", slot, reg, val);
-	return val;
-}
-
-static void i365_set (socket_info_t * s, u_short reg, u_char data)
-{
-#ifdef CONFIG_PCMCIA_SLOT_A
-	int slot = 0;
-#else
-	int slot = 1;
-#endif
-	u_char val;
-
-	val = I365_REG (slot, reg);
-
-	cb_writeb (s, val);
-	cb_writeb2 (s, data);
-
-	debug ("i365_set slot:%x reg: %x data:%x\n", slot, reg, data);
-}
-
-static void i365_bset (socket_info_t * s, u_short reg, u_char mask)
-{
-	i365_set (s, reg, i365_get (s, reg) | mask);
-}
-
-static void i365_bclr (socket_info_t * s, u_short reg, u_char mask)
-{
-	i365_set (s, reg, i365_get (s, reg) & ~mask);
-}
-
-#if 0	/* not used */
-static void i365_bflip (socket_info_t * s, u_short reg, u_char mask, int b)
-{
-	u_char d = i365_get (s, reg);
-
-	i365_set (s, reg, (b) ? (d | mask) : (d & ~mask));
-}
-
-static u_short i365_get_pair (socket_info_t * s, u_short reg)
-{
-	return (i365_get (s, reg) + (i365_get (s, reg + 1) << 8));
-}
-#endif	/* not used */
-
-static void i365_set_pair (socket_info_t * s, u_short reg, u_short data)
-{
-	i365_set (s, reg, data & 0xff);
-	i365_set (s, reg + 1, data >> 8);
-}
-
-/*======================================================================
-
-    Code to save and restore global state information for Cirrus
-    PD67xx controllers, and to set and report global configuration
-    options.
-
-======================================================================*/
-
-#define flip(v,b,f) (v = ((f)<0) ? v : ((f) ? ((v)|(b)) : ((v)&(~b))))
-
-static void cirrus_get_state (socket_info_t * s)
-{
-	int i;
-	cirrus_state_t *p = &s->c_state;
-
-	p->misc1 = i365_get (s, PD67_MISC_CTL_1);
-	p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
-	p->misc2 = i365_get (s, PD67_MISC_CTL_2);
-	for (i = 0; i < 6; i++)
-		p->timer[i] = i365_get (s, PD67_TIME_SETUP (0) + i);
-
-}
-
-static void cirrus_set_state (socket_info_t * s)
-{
-	int i;
-	u_char misc;
-	cirrus_state_t *p = &s->c_state;
-
-	misc = i365_get (s, PD67_MISC_CTL_2);
-	i365_set (s, PD67_MISC_CTL_2, p->misc2);
-	if (misc & PD67_MC2_SUSPEND)
-		udelay (50000);
-	misc = i365_get (s, PD67_MISC_CTL_1);
-	misc &= ~(PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
-	i365_set (s, PD67_MISC_CTL_1, misc | p->misc1);
-	for (i = 0; i < 6; i++)
-		i365_set (s, PD67_TIME_SETUP (0) + i, p->timer[i]);
-}
-
-static u_int cirrus_set_opts (socket_info_t * s)
-{
-	cirrus_state_t *p = &s->c_state;
-	u_int mask = 0xffff;
-#if DEBUG
-	char buf[200];
-
-	memset (buf, 0, 200);
-#endif
-
-	if (has_ring == -1)
-		has_ring = 1;
-	flip (p->misc2, PD67_MC2_IRQ15_RI, has_ring);
-	flip (p->misc2, PD67_MC2_DYNAMIC_MODE, dynamic_mode);
-#if DEBUG
-	if (p->misc2 & PD67_MC2_IRQ15_RI)
-		strcat (buf, " [ring]");
-	if (p->misc2 & PD67_MC2_DYNAMIC_MODE)
-		strcat (buf, " [dyn mode]");
-	if (p->misc1 & PD67_MC1_INPACK_ENA)
-		strcat (buf, " [inpack]");
-#endif
-
-	if (p->misc2 & PD67_MC2_IRQ15_RI)
-		mask &= ~0x8000;
-	if (has_led > 0) {
-#if DEBUG
-		strcat (buf, " [led]");
-#endif
-		mask &= ~0x1000;
-	}
-	if (has_dma > 0) {
-#if DEBUG
-		strcat (buf, " [dma]");
-#endif
-		mask &= ~0x0600;
-		flip (p->misc2, PD67_MC2_FREQ_BYPASS, freq_bypass);
-#if DEBUG
-		if (p->misc2 & PD67_MC2_FREQ_BYPASS)
-			strcat (buf, " [freq bypass]");
-#endif
-	}
-
-	if (setup_time >= 0)
-		p->timer[0] = p->timer[3] = setup_time;
-	if (cmd_time > 0) {
-		p->timer[1] = cmd_time;
-		p->timer[4] = cmd_time * 2 + 4;
-	}
-	if (p->timer[1] == 0) {
-		p->timer[1] = 6;
-		p->timer[4] = 16;
-		if (p->timer[0] == 0)
-			p->timer[0] = p->timer[3] = 1;
-	}
-	if (recov_time >= 0)
-		p->timer[2] = p->timer[5] = recov_time;
-
-	debug ("i82365 Opt: %s [%d/%d/%d] [%d/%d/%d]\n",
-		buf,
-		p->timer[0], p->timer[1], p->timer[2],
-		p->timer[3], p->timer[4], p->timer[5]);
-
-	return mask;
-}
-
-/*======================================================================
-
-    Routines to handle common CardBus options
-
-======================================================================*/
-
-/* Default settings for PCI command configuration register */
-#define CMD_DFLT (PCI_COMMAND_IO|PCI_COMMAND_MEMORY| \
-		  PCI_COMMAND_MASTER|PCI_COMMAND_WAIT)
-
-static void cb_get_state (socket_info_t * s)
-{
-	pci_readb (s, PCI_CACHE_LINE_SIZE, &s->cache);
-	pci_readb (s, PCI_LATENCY_TIMER, &s->pci_lat);
-	pci_readb (s, CB_LATENCY_TIMER, &s->cb_lat);
-	pci_readb (s, CB_CARDBUS_BUS, &s->cap.cardbus);
-	pci_readb (s, CB_SUBORD_BUS, &s->sub_bus);
-	pci_readw (s, CB_BRIDGE_CONTROL, &s->bcr);
-}
-
-static void cb_set_state (socket_info_t * s)
-{
-	pci_writew (s, PCI_COMMAND, CMD_DFLT);
-	pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache);
-	pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat);
-	pci_writeb (s, CB_LATENCY_TIMER, s->cb_lat);
-	pci_writeb (s, CB_CARDBUS_BUS, s->cap.cardbus);
-	pci_writeb (s, CB_SUBORD_BUS, s->sub_bus);
-	pci_writew (s, CB_BRIDGE_CONTROL, s->bcr);
-}
-
-static void cb_set_opts (socket_info_t * s)
-{
-}
-
-/*======================================================================
-
-    Power control for Cardbus controllers: used both for 16-bit and
-    Cardbus cards.
-
-======================================================================*/
-
-static int cb_set_power (socket_info_t * s, socket_state_t * state)
-{
-	u_int reg = 0;
-
-	reg = I365_PWR_NORESET;
-	if (state->flags & SS_PWR_AUTO)
-		reg |= I365_PWR_AUTO;
-	if (state->flags & SS_OUTPUT_ENA)
-		reg |= I365_PWR_OUT;
-	if (state->Vpp != 0) {
-		if (state->Vpp == 120) {
-			reg |= I365_VPP1_12V;
-			puts (" 12V card found: ");
-		} else if (state->Vpp == state->Vcc) {
-			reg |= I365_VPP1_5V;
-		} else {
-			puts (" power not found: ");
-			return -1;
-		}
-	}
-	if (state->Vcc != 0) {
-		reg |= I365_VCC_5V;
-		if (state->Vcc == 33) {
-			puts (" 3.3V card found: ");
-			i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
-		} else if (state->Vcc == 50) {
-			puts (" 5V card found: ");
-			i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
-		} else {
-			puts (" power not found: ");
-			return -1;
-		}
-	}
-
-	if (reg != i365_get (s, I365_POWER)) {
-		reg = (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V);
-		i365_set (s, I365_POWER, reg);
-	}
-
-	return 0;
-}
-
-/*======================================================================
-
-    Generic routines to get and set controller options
-
-======================================================================*/
-
-static void get_bridge_state (socket_info_t * s)
-{
-	cirrus_get_state (s);
-	cb_get_state (s);
-}
-
-static void set_bridge_state (socket_info_t * s)
-{
-	cb_set_state (s);
-	i365_set (s, I365_GBLCTL, 0x00);
-	i365_set (s, I365_GENCTL, 0x00);
-	cirrus_set_state (s);
-}
-
-static void set_bridge_opts (socket_info_t * s)
-{
-	cirrus_set_opts (s);
-	cb_set_opts (s);
-}
-
-/*====================================================================*/
-#define PD67_EXT_INDEX		0x2e	/* Extension index */
-#define PD67_EXT_DATA		0x2f	/* Extension data */
-#define PD67_EXD_VS1(s)		(0x01 << ((s)<<1))
-
-#define pd67_ext_get(s, r) \
-    (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA))
-
-static int i365_get_status (socket_info_t * s, u_int * value)
-{
-	u_int status;
-	u_char val;
-	u_char power, vcc, vpp;
-	u_int powerstate;
-
-	status = i365_get (s, I365_IDENT);
-	status = i365_get (s, I365_STATUS);
-	*value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
-	if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) {
-		*value |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
-	} else {
-		*value |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
-		*value |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
-	}
-	*value |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
-	*value |= (status & I365_CS_READY) ? SS_READY : 0;
-	*value |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
-
-	/* Check for Cirrus CL-PD67xx chips */
-	i365_set (s, PD67_CHIP_INFO, 0);
-	val = i365_get (s, PD67_CHIP_INFO);
-	s->type = -1;
-	if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
-		val = i365_get (s, PD67_CHIP_INFO);
-		if ((val & PD67_INFO_CHIP_ID) == 0) {
-			s->type = (val & PD67_INFO_SLOTS) ? IS_PD672X : IS_PD6710;
-			i365_set (s, PD67_EXT_INDEX, 0xe5);
-			if (i365_get (s, PD67_EXT_INDEX) != 0xe5)
-				s->type = IS_VT83C469;
-		}
-	} else {
-		printf ("no Cirrus Chip found\n");
-		*value = 0;
-		return -1;
-	}
-
-	power = i365_get (s, I365_POWER);
-	state.flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
-	state.flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;
-	vcc = power & I365_VCC_MASK;
-	vpp = power & I365_VPP1_MASK;
-	state.Vcc = state.Vpp = 0;
-	if((vcc== 0) || (vpp == 0)) {
-		/*
-		 * On the Cirrus we get the info which card voltage
-		 * we have in EXTERN DATA and write it to MISC_CTL1
-		 */
-		powerstate = pd67_ext_get(s, PD67_EXTERN_DATA);
-		if (powerstate & PD67_EXD_VS1(0)) {
-			/* 5V Card */
-			i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
-		} else {
-			/* 3.3V Card */
-			i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
-		}
-		i365_set (s, I365_POWER, (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V));
-		power = i365_get (s, I365_POWER);
-	}
-	if (power & I365_VCC_5V) {
-		state.Vcc = (i365_get(s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) ? 33 : 50;
-	}
-
-	if (power == I365_VPP1_12V)
-		state.Vpp = 120;
-
-	/* IO card, RESET flags, IO interrupt */
-	power = i365_get (s, I365_INTCTL);
-	state.flags |= (power & I365_PC_RESET) ? 0 : SS_RESET;
-	if (power & I365_PC_IOCARD)
-		state.flags |= SS_IOCARD;
-	state.io_irq = power & I365_IRQ_MASK;
-
-	/* Card status change mask */
-	power = i365_get (s, I365_CSCINT);
-	state.csc_mask = (power & I365_CSC_DETECT) ? SS_DETECT : 0;
-	if (state.flags & SS_IOCARD)
-		state.csc_mask |= (power & I365_CSC_STSCHG) ? SS_STSCHG : 0;
-	else {
-		state.csc_mask |= (power & I365_CSC_BVD1) ? SS_BATDEAD : 0;
-		state.csc_mask |= (power & I365_CSC_BVD2) ? SS_BATWARN : 0;
-		state.csc_mask |= (power & I365_CSC_READY) ? SS_READY : 0;
-	}
-	debug ("i82365: GetStatus(0) = flags %#3.3x, Vcc %d, Vpp %d, "
-		"io_irq %d, csc_mask %#2.2x\n", state.flags,
-		state.Vcc, state.Vpp, state.io_irq, state.csc_mask);
-
-	return 0;
-}	/* i365_get_status */
-
-static int i365_set_socket (socket_info_t * s, socket_state_t * state)
-{
-	u_char reg;
-
-	set_bridge_state (s);
-
-	/* IO card, RESET flag */
-	reg = 0;
-	reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
-	reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
-	i365_set (s, I365_INTCTL, reg);
-
-	cb_set_power (s, state);
-
-#if 0
-	/* Card status change interrupt mask */
-	reg = s->cs_irq << 4;
-	if (state->csc_mask & SS_DETECT)
-		reg |= I365_CSC_DETECT;
-	if (state->flags & SS_IOCARD) {
-		if (state->csc_mask & SS_STSCHG)
-			reg |= I365_CSC_STSCHG;
-	} else {
-		if (state->csc_mask & SS_BATDEAD)
-			reg |= I365_CSC_BVD1;
-		if (state->csc_mask & SS_BATWARN)
-			reg |= I365_CSC_BVD2;
-		if (state->csc_mask & SS_READY)
-			reg |= I365_CSC_READY;
-	}
-	i365_set (s, I365_CSCINT, reg);
-	i365_get (s, I365_CSC);
-#endif	/* 0 */
-
-	return 0;
-}	/* i365_set_socket */
-
-/*====================================================================*/
-
-static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
-{
-	u_short base, i;
-	u_char map;
-
-	debug ("i82365: SetMemMap(%d, %#2.2x, %d ns, %#5.5lx-%#5.5lx, %#5.5x)\n",
-		mem->map, mem->flags, mem->speed,
-		mem->sys_start, mem->sys_stop, mem->card_start);
-
-	map = mem->map;
-	if ((map > 4) ||
-	    (mem->card_start > 0x3ffffff) ||
-	    (mem->sys_start > mem->sys_stop) ||
-	    (mem->speed > 1000)) {
-		return -1;
-	}
-
-	/* Turn off the window before changing anything */
-	if (i365_get (s, I365_ADDRWIN) & I365_ENA_MEM (map))
-		i365_bclr (s, I365_ADDRWIN, I365_ENA_MEM (map));
-
-	/* Take care of high byte, for PCI controllers */
-	i365_set (s, CB_MEM_PAGE (map), mem->sys_start >> 24);
-
-	base = I365_MEM (map);
-	i = (mem->sys_start >> 12) & 0x0fff;
-	if (mem->flags & MAP_16BIT)
-		i |= I365_MEM_16BIT;
-	if (mem->flags & MAP_0WS)
-		i |= I365_MEM_0WS;
-	i365_set_pair (s, base + I365_W_START, i);
-
-	i = (mem->sys_stop >> 12) & 0x0fff;
-	switch (mem->speed / CYCLE_TIME) {
-	case 0:
-		break;
-	case 1:
-		i |= I365_MEM_WS0;
-		break;
-	case 2:
-		i |= I365_MEM_WS1;
-		break;
-	default:
-		i |= I365_MEM_WS1 | I365_MEM_WS0;
-		break;
-	}
-	i365_set_pair (s, base + I365_W_STOP, i);
-
-	i = 0;
-	if (mem->flags & MAP_WRPROT)
-		i |= I365_MEM_WRPROT;
-	if (mem->flags & MAP_ATTRIB)
-		i |= I365_MEM_REG;
-	i365_set_pair (s, base + I365_W_OFF, i);
-
-	/* set System Memory map Upper Adress */
-	i365_set(s, PD67_EXT_INDEX, PD67_MEM_PAGE(map));
-	i365_set(s, PD67_EXT_DATA, ((mem->sys_start >> 24) & 0xff));
-
-	/* Turn on the window if necessary */
-	if (mem->flags & MAP_ACTIVE)
-		i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map));
-	return 0;
-}	/* i365_set_mem_map */
-
-static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
-{
-	u_char map, ioctl;
-
-	map = io->map;
-	/* comment out: comparison is always false due to limited range of data type */
-	if ((map > 1) || /* (io->start > 0xffff) || (io->stop > 0xffff) || */
-	    (io->stop < io->start))
-		return -1;
-	/* Turn off the window before changing anything */
-	if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map))
-		i365_bclr (s, I365_ADDRWIN, I365_ENA_IO (map));
-	i365_set_pair (s, I365_IO (map) + I365_W_START, io->start);
-	i365_set_pair (s, I365_IO (map) + I365_W_STOP, io->stop);
-	ioctl = i365_get (s, I365_IOCTL) & ~I365_IOCTL_MASK (map);
-	if (io->speed)
-		ioctl |= I365_IOCTL_WAIT (map);
-	if (io->flags & MAP_0WS)
-		ioctl |= I365_IOCTL_0WS (map);
-	if (io->flags & MAP_16BIT)
-		ioctl |= I365_IOCTL_16BIT (map);
-	if (io->flags & MAP_AUTOSZ)
-		ioctl |= I365_IOCTL_IOCS16 (map);
-	i365_set (s, I365_IOCTL, ioctl);
-	/* Turn on the window if necessary */
-	if (io->flags & MAP_ACTIVE)
-		i365_bset (s, I365_ADDRWIN, I365_ENA_IO (map));
-	return 0;
-}	/* i365_set_io_map */
-
-/*====================================================================*/
-
-/*
- * PCI_ADDR = (HOST_ADDR - 0xfe000000)
- * see MPC 8245 Users Manual Adress Map B
- */
-#define	HOST_TO_PCI(addr)	((addr) - 0xfe000000)
-#define	PCI_TO_HOST(addr)	((addr) + 0xfe000000)
-
-static int i82365_init (void)
-{
-	u_int val;
-	int i;
-
-	if ((socket.dev = pci_find_devices (supported, 0)) < 0) {
-		/* Controller not found */
-		printf ("No PD67290 device found !!\n");
-		return 1;
-	}
-	debug ("i82365 Device Found!\n");
-
-	socket.cb_phys = PCMCIA_IO_BASE;
-
-	/* set base address */
-	pci_write_config_dword (socket.dev, PCI_BASE_ADDRESS_0,
-		HOST_TO_PCI(socket.cb_phys));
-
-	/* enable mapped memory and IO addresses */
-	pci_write_config_dword (socket.dev,
-				PCI_COMMAND,
-				PCI_COMMAND_MEMORY |
-				PCI_COMMAND_IO | PCI_COMMAND_WAIT);
-
-	get_bridge_state (&socket);
-	set_bridge_opts (&socket);
-
-	i = i365_get_status (&socket, &val);
-
-	if (i > -1) {
-		puts (pcic[socket.type].name);
-	} else {
-		printf ("i82365: Controller not found.\n");
-		return 1;
-	}
-	if((val & SS_DETECT) != SS_DETECT){
-		puts ("No card\n");
-		return 1;
-	}
-
-	state.flags |= SS_OUTPUT_ENA;
-
-	i365_set_socket (&socket, &state);
-
-	for (i = 500; i; i--) {
-		if ((i365_get (&socket, I365_STATUS) & I365_CS_READY))
-			break;
-		udelay (1000);
-	}
-
-	if (i == 0) {
-		/* PC Card not ready for data transfer */
-		puts ("i82365 PC Card not ready for data transfer\n");
-		return 1;
-	}
-	debug (" PC Card ready for data transfer: ");
-
-	mem.map = 0;
-	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
-	mem.speed = 300;
-	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
-	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
-	mem.card_start = 0;
-	i365_set_mem_map (&socket, &mem);
-
-	mem.map = 1;
-	mem.flags = MAP_ACTIVE;
-	mem.speed = 300;
-	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
-	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
-	mem.card_start = 0;
-	i365_set_mem_map (&socket, &mem);
-
-#ifdef DEBUG
-	i82365_dump_regions (socket.dev);
-#endif
-
-	return 0;
-}
-
-static void i82365_exit (void)
-{
-	io.map = 0;
-	io.flags = 0;
-	io.speed = 0;
-	io.start = 0;
-	io.stop = 0x1;
-
-	i365_set_io_map (&socket, &io);
-
-	mem.map = 0;
-	mem.flags = 0;
-	mem.speed = 0;
-	mem.sys_start = 0;
-	mem.sys_stop = 0x1000;
-	mem.card_start = 0;
-
-	i365_set_mem_map (&socket, &mem);
-
-	mem.map = 1;
-	mem.flags = 0;
-	mem.speed = 0;
-	mem.sys_start = 0;
-	mem.sys_stop = 0x1000;
-	mem.card_start = 0;
-
-	i365_set_mem_map (&socket, &mem);
-
-	state.Vcc = state.Vpp = 0;
-
-	i365_set_socket (&socket, &state);
-}
-
-int pcmcia_on (void)
-{
-	u_int rc;
-
-	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
-	rc = i82365_init();
-	if (rc)
-		goto exit;
-
-	rc = check_ide_device(0);
-	if (rc == 0)
-		goto exit;
-
-	i82365_exit();
-
-exit:
-	return rc;
-}
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_off (void)
-{
-	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
-	i82365_exit();
-
-	return 0;
-}
-#endif
-
-/*======================================================================
-
-    Debug stuff
-
-======================================================================*/
-
-#ifdef DEBUG
-static void i82365_dump_regions (pci_dev_t dev)
-{
-	u_int tmp[2];
-	u_int *mem = (void *) socket.cb_phys;
-	u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
-	u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
-
-	pci_read_config_dword (dev, 0x00, tmp + 0);
-	pci_read_config_dword (dev, 0x80, tmp + 1);
-
-	printf ("PCI CONF: %08X ... %08X\n",
-		tmp[0], tmp[1]);
-	printf ("PCI MEM:  ... %08X ... %08X\n",
-		mem[0x8 / 4], mem[0x800 / 4]);
-	printf ("CIS:      ...%c%c%c%c%c%c%c%c...\n",
-		cis[0x38], cis[0x3a], cis[0x3c], cis[0x3e],
-		cis[0x40], cis[0x42], cis[0x44], cis[0x48]);
-	printf ("CIS CONF: %02X %02X %02X ...\n",
-		cis[0x200], cis[0x202], cis[0x204]);
-	printf ("IDE:      %02X %02X %02X %02X %02X %02X %02X %02X\n",
-		ide[0], ide[1], ide[2], ide[3],
-		ide[4], ide[5], ide[6], ide[7]);
-}
-#endif	/* DEBUG */
-
-#endif /* CONFIG_I82365 */