added boot script files to repository

5 files changed, 0 insertions, 571 deletions

diff --git a/board/freescale/p2020ds/Makefile b/board/freescale/p2020ds/Makefile
deleted file mode 100644
index 3306e44..0000000
--- a/board/freescale/p2020ds/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# Copyright 2007-2009 Freescale Semiconductor, Inc.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS-y	+= $(BOARD).o
-COBJS-y	+= ddr.o
-COBJS-y	+= law.o
-COBJS-y	+= tlb.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS-y))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c
deleted file mode 100644
index 9a1b075..0000000
--- a/board/freescale/p2020ds/ddr.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <i2c.h>
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-
-static void get_spd(generic_spd_eeprom_t *spd, unsigned char i2c_address)
-{
-	i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t));
-}
-
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
-	return get_ddr_freq(0);
-}
-
-void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
-		      unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0 && i == 0)
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
-typedef struct {
-	u32 datarate_mhz_low;
-	u32 datarate_mhz_high;
-	u32 n_ranks;
-	u32 clk_adjust;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2T;
-} board_specific_parameters_t;
-
-/* ranges for parameters:
- *  wr_data_delay = 0-6
- *  clk adjust = 0-8
- *  cpo 2-0x1E (30)
- */
-
-const board_specific_parameters_t board_specific_parameters[][20] = {
-	{
-	/* 	memory controller 0 			*/
-	/*	  lo|  hi|  num|  clk| cpo|wrdata|2T	*/
-	/*	 mhz| mhz|ranks|adjst|    | delay|	*/
-#ifdef CONFIG_FSL_DDR2
-		{  0, 333,    2,    4,   0x1f,    2,  0},
-		{334, 400,    2,    4,   0x1f,    2,  0},
-		{401, 549,    2,    4,   0x1f,    2,  0},
-		{550, 680,    2,    4,   0x1f,    3,  0},
-		{681, 850,    2,    4,   0x1f,    4,  0},
-		{  0, 333,    1,    4,   0x1f,    2,  0},
-		{334, 400,    1,    4,   0x1f,    2,  0},
-		{401, 549,    1,    4,   0x1f,    2,  0},
-		{550, 680,    1,    4,   0x1f,    3,  0},
-		{681, 850,    1,    4,   0x1f,    4,  0}
-#else
-		{  0, 850,    2,    6,   0x1f,    4,  0},
-		{  0, 850,    1,    4,   0x1f,    4,  0}
-#endif
-	},
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const board_specific_parameters_t *pbsp =
-				&(board_specific_parameters[ctrl_num][0]);
-	u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
-				sizeof(board_specific_parameters[0][0]);
-	u32 i;
-	ulong ddr_freq;
-
-	/* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
-	 * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
-	 * there are two dimms in the controller, set odt_rd_cfg to 3 and
-	 * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
-	 */
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-			popts->cs_local_opts[i].odt_rd_cfg = 0;
-			popts->cs_local_opts[i].odt_wr_cfg = 1;
-	}
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	for (i = 0; i < num_params; i++) {
-		if (ddr_freq >= pbsp->datarate_mhz_low &&
-		    ddr_freq <= pbsp->datarate_mhz_high &&
-		    pdimm->n_ranks == pbsp->n_ranks) {
-			popts->clk_adjust = pbsp->clk_adjust;
-			popts->cpo_override = pbsp->cpo;
-			popts->write_data_delay = pbsp->write_data_delay;
-			popts->twoT_en = pbsp->force_2T;
-		}
-		pbsp++;
-	}
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	popts->wrlvl_en = 1;
-	/* Write leveling override */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xa;
-	popts->wrlvl_start = 0x8;
-	/* Rtt and Rtt_WR override */
-	popts->rtt_override = 1;
-	popts->rtt_override_value = DDR3_RTT_120_OHM;
-	popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */
-}
diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c
deleted file mode 100644
index 91642a9..0000000
--- a/board/freescale/p2020ds/law.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
deleted file mode 100644
index 8546aa9..0000000
--- a/board/freescale/p2020ds/p2020ds.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2007-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <tsec.h>
-#include <asm/fsl_law.h>
-#include <asm/mp.h>
-#include <netdev.h>
-
-#include "../common/ngpixis.h"
-#include "../common/sgmii_riser.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	u8 sw;
-
-	puts("Board: P2020DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-		in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
-
-	sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
-	sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
-
-	if (sw < 0x8)
-		/* The lower two bits are the actual vbank number */
-		printf("vBank: %d\n", sw & 3);
-	else
-		puts("Promjet\n");
-
-	return 0;
-}
-
-#if !defined(CONFIG_DDR_SPD)
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram(void)
-{
-	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-	uint d_init;
-
-	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
-	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
-	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
-	ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTRL;
-	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
-	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
-	ddr->ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL;
-	ddr->ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL;
-	ddr->ddr_cdr1 = CONFIG_SYS_DDR_CDR1;
-	ddr->timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4;
-	ddr->timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5;
-
-	if (!strcmp("performance", getenv("perf_mode"))) {
-		/* Performance Mode Values */
-
-		ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG_PERF;
-		ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS_PERF;
-		ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS_PERF;
-		ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_PERF;
-		ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_PERF;
-
-		asm("sync;isync");
-
-		udelay(500);
-
-		ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL_PERF;
-	} else {
-		/* Stable Mode Values */
-
-		ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
-		ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
-		ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
-		ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-		ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-
-		/* ECC will be assumed in stable mode */
-		ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
-		ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
-		ddr->err_sbe = CONFIG_SYS_DDR_SBE;
-
-		asm("sync;isync");
-
-		udelay(500);
-
-		ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
-	}
-
-#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	d_init = 1;
-	debug("DDR - 1st controller: memory initializing\n");
-	/*
-	 * Poll until memory is initialized.
-	 * 512 Meg at 400 might hit this 200 times or so.
-	 */
-	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0)
-		udelay(1000);
-	debug("DDR: memory initialized\n\n");
-	asm("sync; isync");
-	udelay(500);
-#endif
-
-	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-			 CONFIG_SYS_SDRAM_SIZE * 1024 * 1024,
-			 LAW_TRGT_IF_DDR) < 0) {
-		printf("ERROR setting Local Access Windows for DDR\n");
-		return 0;
-	};
-
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-}
-
-#endif
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	/* invalidate existing TLB entry for flash + promjet */
-	disable_tlb(flash_esel);
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	return 0;
-}
-
-#ifdef CONFIG_TSEC_ENET
-int board_eth_init(bd_t *bis)
-{
-	struct tsec_info_struct tsec_info[4];
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	if (is_serdes_configured(SGMII_TSEC2)) {
-		puts("eTSEC2 is in sgmii mode.\n");
-		tsec_info[num].flags |= TSEC_SGMII;
-	}
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	SET_STD_TSEC_INFO(tsec_info[num], 3);
-	if (is_serdes_configured(SGMII_TSEC3)) {
-		puts("eTSEC3 is in sgmii mode.\n");
-		tsec_info[num].flags |= TSEC_SGMII;
-}
-	num++;
-#endif
-
-	if (!num) {
-		printf("No TSECs initialized\n");
-
-		return 0;
-	}
-
-#ifdef CONFIG_FSL_SGMII_RISER
-	fsl_sgmii_riser_init(tsec_info, num);
-#endif
-
-	tsec_eth_init(bis, tsec_info, num);
-
-	return pci_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-	FT_FSL_PCI_SETUP;
-
-#ifdef CONFIG_FSL_SGMII_RISER
-	fsl_sgmii_riser_fdt_fixup(blob);
-#endif
-}
-#endif
-
-#ifdef CONFIG_MP
-void board_lmb_reserve(struct lmb *lmb)
-{
-	cpu_mp_lmb_reserve(lmb);
-}
-#endif
diff --git a/board/freescale/p2020ds/tlb.c b/board/freescale/p2020ds/tlb.c
deleted file mode 100644
index 824b3b2..0000000
--- a/board/freescale/p2020ds/tlb.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 1),
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_1M, 1),
-
-	/* W**G* - Flash/promjet, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000,
-		      CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000,
-		      CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_256K, 1),
-
-	/* *I*G - NAND */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_1M, 1),
-
-	SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 8, BOOKE_PAGESZ_4K, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);