diff options
| author | wdenk <wdenk> | 2003-04-05 00:53:31 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-04-05 00:53:31 +0000 |
| commit | 3e38691e8f7aa0d9b498d76c7279ddec6e4946f3 (patch) | |
| tree | bec2e661298847dc5bcf9335ef31259686e882e1 /board/innokom/innokom.c | |
| parent | 36c05a80ecbe3997abd9aa628a68dd6c0bacf681 (diff) | |
| download | bootable_bootloader_goldelico_gta04-3e38691e8f7aa0d9b498d76c7279ddec6e4946f3.zip bootable_bootloader_goldelico_gta04-3e38691e8f7aa0d9b498d76c7279ddec6e4946f3.tar.gz bootable_bootloader_goldelico_gta04-3e38691e8f7aa0d9b498d76c7279ddec6e4946f3.tar.bz2 | |
* Patch by Arun Dharankar, 4 Apr 2003:
Add IDMA example code (tested on 8260 only)
* Add support for Purple Board (MIPS64 5Kc)
* Add support for MIPS64 5Kc CPUs
* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
* Patch by Denis Peter, 04 Apr 2003:
- update MIP405-4 board
* Patches by Denis Peter, 03 April 2003:
- fix PCI IRQs on MPL boards
- fix two more un-relocated pointer problems
* Fix behaviour of "run" command:
- print error message iv variable does not exist
- terminate processing of arguments in case of error
* Patches by Peter Figuli, 10 Mar 2003
- Add support for BTUART on PXA platform
- Add support for WEP EP250 (PXA) board
* Fix flash problems on INCA-IP; add tool to allow bruning images to
flash using a BDI2000
* Implement fix for I2C Edge Conditions problem for all boards that
use the bit-banging driver (common/soft_i2c.c)
* Add patches by Robert Schwebel, 31 Mar 2003:
- csb226 board: bring in sync with innokom/memsetup.S
- csb226 board: fix MDREFR handling
- misc doc fixes / extensions
- innokom board: cleanup, MDREFR fix in memsetup.S, config update
- add BOOT_PROGRESS to armlinux.c
Diffstat (limited to 'board/innokom/innokom.c')
| -rw-r--r-- | board/innokom/innokom.c | 7 |
1 files changed, 1 insertions, 6 deletions
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c index 5ee5117..da238da 100644 --- a/board/innokom/innokom.c +++ b/board/innokom/innokom.c @@ -48,7 +48,7 @@ int i2c_init_board(void) icr = ICR; ICR &= ~(ICR_SCLE | ICR_IUE); /* set gpio pin low _before_ we change direction to output */ - GPCR(70) = GPIO_bit(70); + GPCR(70) = GPIO_bit(70); /* now toggle between output=low and high-impedance */ for (i = 0; i < 20; i++) { @@ -100,13 +100,8 @@ int board_init (void) /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ - /* arch number of Innokom board */ gd->bd->bi_arch_number = MACH_TYPE_INNOKOM; - - /* adress of boot parameters */ gd->bd->bi_boot_params = 0xa0000100; - - /* baud rate */ gd->bd->bi_baudrate = CONFIG_BAUDRATE; return 0; |