diff options
author | Dirk Behme <dirk.behme@googlemail.com> | 2008-12-14 09:47:14 +0100 |
---|---|---|
committer | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2009-01-24 17:51:21 +0100 |
commit | 5ed3e8659e5373f6a229877ac506c0b00a054fb8 (patch) | |
tree | a64fe24e92df472fd0e442077230e6004e7a9260 /cpu/arm_cortexa8/omap3/lowlevel_init.S | |
parent | 0b02b184003e6a5023e05d5f31de54db279b1431 (diff) | |
download | bootable_bootloader_goldelico_gta04-5ed3e8659e5373f6a229877ac506c0b00a054fb8.zip bootable_bootloader_goldelico_gta04-5ed3e8659e5373f6a229877ac506c0b00a054fb8.tar.gz bootable_bootloader_goldelico_gta04-5ed3e8659e5373f6a229877ac506c0b00a054fb8.tar.bz2 |
OMAP3: Add common clock, memory and low level code
Add common clock, memory and low level code
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Diffstat (limited to 'cpu/arm_cortexa8/omap3/lowlevel_init.S')
-rw-r--r-- | cpu/arm_cortexa8/omap3/lowlevel_init.S | 361 |
1 files changed, 361 insertions, 0 deletions
diff --git a/cpu/arm_cortexa8/omap3/lowlevel_init.S b/cpu/arm_cortexa8/omap3/lowlevel_init.S new file mode 100644 index 0000000..cf1f927 --- /dev/null +++ b/cpu/arm_cortexa8/omap3/lowlevel_init.S @@ -0,0 +1,361 @@ +/* + * Board specific setup info + * + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Initial Code by: + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks_omap3.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3 - r10} /* copy from source address [r0] */ + stmia r1!, {r3 - r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* *************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this + * code runs from flash before SDR is init so that should be ok. + ****************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4 - r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4 - r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll, mux, memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ + +/* + * Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct (clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1 +/* ES2 */ +.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2 +/* 3410 */ +.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12 + +/* 13MHz */ +/* ES1 */ +.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1 +/* ES2 */ +.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2 +/* 3410 */ +.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1 +/* ES2 */ +.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2 +/* 3410 */ +.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1 +/* ES2 */ +.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2 +/* 3410 */ +.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1 +/* ES2 */ +.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2 +/* 3410 */ +.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1 +/* ES2 */ +.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2 +/* 3410 */ +.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12 + +/* 13MHz */ +/* ES1 */ +.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1 +/* ES2 */ +.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2 +/* 3410 */ +.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1 +/* ES2 */ +.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2 +/* 3410 */ +.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1 +/* ES2 */ +.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2 +/* 3410 */ +.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1 +/* ES2 */ +.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2 +/* 3410 */ +.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1 +/* ES2 */ +.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 +/* 3410 */ +.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 + +/* 13MHz */ +/* ES1 */ +.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1 +/* ES2 */ +.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 +/* 3410 */ +.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1 +/* ES2 */ +.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 +/* 3410 */ +.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1 +/* ES2 */ +.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 +/* 3410 */ +.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1 +/* ES2 */ +.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 +/* 3410 */ +.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12 + +/* 13MHz */ +.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13 + +/* 19.2MHz */ +.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2 + +/* 26MHz */ +.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26 + +/* 38.4MHz */ +.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr |