diff options
author | wdenk <wdenk> | 2003-03-06 00:58:30 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2003-03-06 00:58:30 +0000 |
commit | db2f721ffcf9693086a7e5c6c7015f2019e7f52e (patch) | |
tree | 1d755e28c035c1247f30b570ed239a097a7d13c8 /cpu | |
parent | 43d9616cffb4a130e1620e3e33fc9bc1bcabe399 (diff) | |
download | bootable_bootloader_goldelico_gta04-db2f721ffcf9693086a7e5c6c7015f2019e7f52e.zip bootable_bootloader_goldelico_gta04-db2f721ffcf9693086a7e5c6c7015f2019e7f52e.tar.gz bootable_bootloader_goldelico_gta04-db2f721ffcf9693086a7e5c6c7015f2019e7f52e.tar.bz2 |
* Patch by Rune Torgersen, 13 Feb 2003:
Add support for Motorola MPC8266ADS board
* Patch by Kyle Harris, 19 Feb 2003:
patches for the Intel lubbock board:
memsetup.S - general cleanup (based on Robert's csb226 code)
flash.c - overhaul, actually works now
lubbock.c - fix init funcs to return proper value
* Patch by Kenneth Johansson, 26 Feb 2003:
- Fixed off by one in RFTA calculation.
- No need to abort when LDF is lower than we can program it's only
minimum timing so clamp it to what we can do.
- Takes function pointer to function for reading the spd_nvram. Usefull
for faking data or hardcode a module without the nvram.
- fix other user for above change
- fix some comments.
* Patches by Brian Waite, 26 Feb 2003:
- fix port for evb64260 board
- fix PCI for evb64260 board
- fix PCI scan
* Patch by Reinhard Meyer, 1 Mar 2003:
Add support for EMK TOP860 Module
* Patch by Yuli Barcohen, 02 Mar 2003:
Add SPD EEPROM support for MPC8260ADS board
Diffstat (limited to 'cpu')
-rw-r--r-- | cpu/ppc4xx/spd_sdram.c | 93 |
1 files changed, 45 insertions, 48 deletions
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c index fc0c980..bf5d224 100644 --- a/cpu/ppc4xx/spd_sdram.c +++ b/cpu/ppc4xx/spd_sdram.c @@ -4,8 +4,8 @@ * * Based on code by: * - * Kenneth Johansson ,Ericsson Business Innovation. - * kenneth.johansson@inn.ericsson.se + * Kenneth Johansson ,Ericsson AB. + * kenneth.johansson@etx.ericsson.se * * hacked up by bill hunter. fixed so we could run before * serial_init and console_init. previous version avoided this by @@ -87,25 +87,16 @@ #define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) ) #define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) ) -#ifdef CONFIG_W7O +#ifdef CONFIG_SPDDRAM_SILENT # define SPD_ERR(x) do { return 0; } while (0) #else -# define SPD_ERR(x) do { printf(x); hang(); } while (0) +# define SPD_ERR(x) do { printf(x); return(0); } while (0) #endif -/* - * what we really want is - * (1/hertz) but we don't want to use floats so multiply with 10E9 - * - * The error needs to be on the safe side so we want the floor function. - * This means we get an exact value or we calculate that our bus frequency is - * a bit faster than it really is and thus we don't progam the sdram controller - * to run to fast - */ #define sdram_HZ_to_ns(hertz) (1000000000/(hertz)) /* function prototypes */ -int spd_read(uint addr); /* prototype */ +int spd_read(uint addr); /* @@ -114,17 +105,17 @@ int spd_read(uint addr); /* prototype */ * * This works on boards that has the same schematics that the IBM walnut has. * - * BUG: Don't handle ECC memory - * BUG: A few values in the TR register is currently hardcoded + * Input: null for default I2C spd functions or a pointer to a custom function + * returning spd_data. */ -long int spd_sdram(void) +long int spd_sdram(int(read_spd)(uint addr)) { int bus_period,tmp,row,col; int total_size,bank_size,bank_code; int ecc_on; - int mode = 4; - int bank_cnt = 1; + int mode; + int bank_cnt; int sdram0_pmit=0x07c00000; int sdram0_besr0=-1; @@ -144,14 +135,19 @@ long int spd_sdram(void) int t_rp; int t_rcd; - int t_rc = 70; /* This value not available in SPD_EEPROM */ - int min_cas = 2; + int t_ras; + int t_rc; + int min_cas; + if(read_spd == 0){ + read_spd=spd_read; /* * Make sure I2C controller is initialized * before continuing. */ - i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + } + /* * Calculate the bus period, we do it this @@ -162,7 +158,7 @@ long int spd_sdram(void) bus_period = sdram_HZ_to_ns(tmp); /* get sdram speed */ /* Make shure we are using SDRAM */ - if (spd_read(2) != 0x04){ + if (read_spd(2) != 0x04){ SPD_ERR("SDRAM - non SDRAM memory module found\n"); } @@ -180,34 +176,35 @@ long int spd_sdram(void) * use the min supported mode */ - tmp = spd_read(127) & 0x6; + tmp = read_spd(127) & 0x6; if(tmp == 0x02){ /* only cas = 2 supported */ min_cas = 2; -/* t_ck = spd_read(9); */ -/* t_ac = spd_read(10); */ +/* t_ck = read_spd(9); */ +/* t_ac = read_spd(10); */ } else if (tmp == 0x04){ /* only cas = 3 supported */ min_cas = 3; -/* t_ck = spd_read(9); */ -/* t_ac = spd_read(10); */ +/* t_ck = read_spd(9); */ +/* t_ac = read_spd(10); */ } else if (tmp == 0x06){ /* 2,3 supported, so use 2 */ min_cas = 2; -/* t_ck = spd_read(23); */ -/* t_ac = spd_read(24); */ +/* t_ck = read_spd(23); */ +/* t_ac = read_spd(24); */ } else { SPD_ERR("SDRAM - unsupported CAS latency \n"); } - /* get some timing values, t_rp,t_rcd + /* get some timing values, t_rp,t_rcd,t_ras,t_rc */ - t_rp = spd_read(27); - t_rcd = spd_read(29); - + t_rp = read_spd(27); + t_rcd = read_spd(29); + t_ras = read_spd(30); + t_rc = t_ras + t_rp; /* The following timing calcs subtract 1 before deviding. - * this has effect of using ceiling intead of floor rounding, + * this has effect of using ceiling instead of floor rounding, * and also subtracting 1 to convert number to reg value */ /* set up CASL */ @@ -216,12 +213,12 @@ long int spd_sdram(void) sdram0_tr |= (((t_rp - 1)/bus_period) & 0x3) << SDRAM0_TR_PTA_SHIFT; /* set up CTP */ tmp = ((t_rc - t_rcd - t_rp -1) / bus_period) & 0x3; - if(tmp<1) SPD_ERR("SDRAM - unsupported prech to act time (Trp)\n"); + if(tmp<1) tmp=1; sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT; /* set LDF = 2 cycles, reg value = 1 */ sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT; /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */ - tmp = ((t_rc - 1) / bus_period)-4; + tmp = ( (t_rc - 1) / bus_period)-3; if(tmp<0)tmp=0; if(tmp>6)tmp=6; sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT; @@ -232,9 +229,9 @@ long int spd_sdram(void) /*------------------------------------------------------------------ configure RTR register -------------------------------------------------------------------*/ - row = spd_read(3); - col = spd_read(4); - tmp = spd_read(12) & 0x7f ; /* refresh type less self refresh bit */ + row = read_spd(3); + col = read_spd(4); + tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */ switch(tmp){ case 0x00: tmp=15625; @@ -265,9 +262,9 @@ long int spd_sdram(void) determine the number of banks used -------------------------------------------------------------------*/ /* byte 7:6 is module data width */ - if(spd_read(7) != 0) + if(read_spd(7) != 0) SPD_ERR("SDRAM - unsupported module width\n"); - tmp = spd_read(6); + tmp = read_spd(6); if (tmp < 32) SPD_ERR("SDRAM - unsupported module width\n"); else if (tmp < 64) @@ -280,7 +277,7 @@ long int spd_sdram(void) SPD_ERR("SDRAM - unsupported module width\n"); /* byte 5 is the module row count (refered to as dimm "sides") */ - tmp = spd_read(5); + tmp = read_spd(5); if(tmp==1); else if(tmp==2) bank_cnt *=2; else if(tmp==4) bank_cnt *=4; @@ -292,7 +289,7 @@ long int spd_sdram(void) /* now check for ECC ability of module. We only support ECC * on 32 bit wide devices with 8 bit ECC. */ - if ( (spd_read(11)==2) && ((spd_read(6)==40) || (spd_read(14)==8)) ){ + if ( (read_spd(11)==2) && ((read_spd(6)==40) || (read_spd(14)==8)) ){ sdram0_ecccfg=0xf<<SDRAM0_ECCCFG_SHIFT; ecc_on = 1; } @@ -305,15 +302,15 @@ long int spd_sdram(void) calculate total size -------------------------------------------------------------------*/ /* calculate total size and do sanity check */ - tmp = spd_read(31); + tmp = read_spd(31); total_size=1<<22; /* total_size = 4MB */ - /* now multiply 4M by the smallest device roe density */ + /* now multiply 4M by the smallest device row density */ /* note that we don't support asymetric rows */ while (((tmp & 0x0001) == 0) && (tmp != 0)){ total_size= total_size<<1; tmp = tmp>>1; } - total_size *= spd_read(5); /* mult by module rows (dimm sides) */ + total_size *= read_spd(5); /* mult by module rows (dimm sides) */ /*------------------------------------------------------------------ map rows * cols * banks to a mode @@ -357,7 +354,7 @@ long int spd_sdram(void) break; case 9: case 10: - if (spd_read(17) ==2 ) + if (read_spd(17) ==2 ) mode=6; /* mode 7 */ else mode=2; /* mode 3 */ |