diff options
author | Thomas Chou <thomas@wytron.com.tw> | 2010-05-28 10:56:50 +0800 |
---|---|---|
committer | Scott McNutt <smcnutt@psyent.com> | 2010-05-28 10:56:04 -0400 |
commit | 1117cbf2adac59050af1751af6c6a524afa5c3ef (patch) | |
tree | a53832c1bcea3180e6830e8b3f9cb41adeed2d44 /doc | |
parent | 6803336c9f21ba428f5c1b1cf825bbbac0a762e5 (diff) | |
download | bootable_bootloader_goldelico_gta04-1117cbf2adac59050af1751af6c6a524afa5c3ef.zip bootable_bootloader_goldelico_gta04-1117cbf2adac59050af1751af6c6a524afa5c3ef.tar.gz bootable_bootloader_goldelico_gta04-1117cbf2adac59050af1751af6c6a524afa5c3ef.tar.bz2 |
nios: remove nios-32 arch
The nios-32 arch is obsolete and broken. So it is removed.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/README.adnpesc1 | 235 | ||||
-rw-r--r-- | doc/README.adnpesc1_base32 | 469 | ||||
-rw-r--r-- | doc/README.dk1c20 | 153 | ||||
-rw-r--r-- | doc/README.dk1c20_std32 | 366 | ||||
-rw-r--r-- | doc/README.dk1s10 | 131 | ||||
-rw-r--r-- | doc/README.dk1s10_mldk20 | 286 | ||||
-rw-r--r-- | doc/README.dk1s10_std32 | 354 | ||||
-rw-r--r-- | doc/README.dk1s40_std32 | 355 | ||||
-rw-r--r-- | doc/README.dk20k200_std32 | 242 | ||||
-rw-r--r-- | doc/README.nios | 366 | ||||
-rw-r--r-- | doc/README.nios_CONFIG_SYS_NIOS_CPU | 140 | ||||
-rw-r--r-- | doc/README.nios_DK | 192 | ||||
-rw-r--r-- | doc/uImage.FIT/source_file_format.txt | 3 |
13 files changed, 1 insertions, 3291 deletions
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1 deleted file mode 100644 index f9566b8..0000000 --- a/doc/README.adnpesc1 +++ /dev/null @@ -1,235 +0,0 @@ - - SSV ADNP/ESC1 Embedded Softcore Computing - Nios Softcore, Altera Cyclone FPGA - - Last Update: February 27, 2004 -==================================================================== - -This file contains information regarding U-Boot and the SSV Embedded -Nios Softcore Computing platform ADNP/ESC1. For general Nios -information see doc/README.nios. - -Most stuff of this file was borrowed and based on README.dk1s10, -the Altera DK-1S10 related information file. - -For those interested in contributing ... see HELP WANTED section -in doc/README.nios. - -Contents: - - 1. Files - 2. Memory Organization - 3. CPU Variations - 4. Examples - 5. Programming U-Boot into FLASH with GERMS - 6. Autoboot - 7. U-Boot environment convention and update philosophy - -==================================================================== - -1. Files -========= - board/ssv/adnpesc1/* - include/configs/ADNPESC1.h - include/configs/ADNPESC1_base_32.h - - -2. Memory Organization -======================= - -For the most part, you can put things pretty much anywhere. -This is pretty flexible for Nios. So here we make some arbitrary -choices & assume that the monitor is placed at the end of a memory -resource. So you must make sure TEXT_BASE is chosen appropriately. -This is very important if you plan to move your memory to another -place as configured at this time! - - -The heap is placed below the monitor (U-Boot code). - -Global data is placed below the heap. - -The stack is placed below global data (&grows down). - -(see doc/README.adnpesc1_base32 too) - - -3. CPU Variations -================= - -There are more than one NIOS CPU variation for the ADNP/ESC1 possible. -U-Boot supports the following CPU configurations: - - - SSV Basis 32 (make ADNPESC1_base_32_config) - - SSV Basis 32 at DNP evaluation base board 2 - (make ADNPESC1_DNPEVA2_base_32_config) - - -4. Examples -============ - -The hello_world example works fine. To try out you have to change -the default load address from 0x0100_0000 to 0x0204_0000 in -examples/Makefile (the real SDRAM for default board configuration). - - -5. Programming U-Boot into FLASH with GERMS -============================================ - -The current version of the ADNP/ESC1 port with the default -configuration settings occupies about 97 KBytes of flash. -A minimal configuration occupies less than 70 KByte -(network, SPI, POST and board command support disabled). You -can save more memory by deactivating the Hu-Shell support and -long command help (CONFIG_SYS_HUSH_PARSER, CONFIG_SYS_LONGHELP). - -To program U-Boot into the ADNP/ESC1 flash using GERMS do the -following: - -1. Download U-Boot to its target run space in SDRAM: - - a. Close jumper RCM_EN# and push the reset button. - - b. From the command line, download U-Boot using the - nios-run: - - $ nios-run -r u-boot.srec - - NOTE: In some cases this want fail. I don't know why, - but try again. - -This takes about 1 minute (GERMS is not very speedy here). -After u-boot is downloaded it will be executed. You should -see the following: - - U-Boot 1.0.2 (Jan 30 2004 - 12:59:15) - - CPU: Nios-32 Rev. 3.3 (0x3038) - Reg file size: 512 LO_LIMIT/HI_LIMIT: 1/30 - Board: SSV DilNetPC ADNP/ESC1 - Conf.: SSV Base 32 (nios_32) - In: serial - Out: serial - Err: serial - ADNPESC1 > - - -2. Quit nios-run and start your terminal application (e.g. start - Hyperterminal or minicom). - -3. Download the u-boot code to RAM. When using Hyperterminal, do the - following: - - a. From the u-boot command prompt start a binary download to SDRAM: - - at the SSV Basis 32 to SDRAM: - - ==> loadb 2000100 - - b. Download u-boot.bin using kermit. - -4. From the U-Boot command prompt, erase flash: - - at the SSV Basis 32 from 0x1000000 to 0x103ffff: - - ==> protect off 1:0-3 - ==> erase 1:0-3 - -5. Copy the binary image from SDRAM to flash: - - at the SSV Basis 32 from SDRAM: - - ==> cp.b 2000100 1000000 $filesize - -U-Boot will now automatically start when the board is powered on or -reset using the SSV Basis 32 configuration without closed RCM jumper. -To start U-Boot with closed RCM Jumper, enter the following GERMS -command: - - + g 1000000 - - -6. Autoboot -=========== - -U-Boot will try to boot a valid Nios application from Flash. For this -it will use the deposited Hu-Shell script in environment variable -'bootcmd' which is looking for a valid Nios application identifier -string in Flash and go on at even its entry address. For more -information see the next chapter. - - -7. U-Boot environment convention and update philosophy -====================================================== - -U-Boot for the SSV ADNP/ESC1 target knows about many environment -variables used to control the startup process, update process for -raw Nios applications, and optionally file system image updates. -In default configuration there are two Hu-Shell scripts to update -the Nios application and/or the file system image: - -1. Update Nios application (ex. the uCLinux kernel): - - run 'appl_update' - -2. Update optional file system image (ex. RomFS image used by uCLinux): - - run 'fs_update' - -The Nios application can be any programm code generated in relation -to the Nios application identifier -- the string "Nios" at offset -address 0x0c. To use the scripts like described above in a secure way -you have to check-up the next environment variables: - -1. update_allowed - - - Update switch -- must be set to '1' (one) to allow any update - - default is '0' (zero) - - NOTE: You should avoid to save this variable with non zero - value to Flash. Otherwise it would be allow any - update process at any time! - -2. appl_entry_addr - - - Nios application area start address (usually in Flash) - - this is the startup address for autoboot - - each Nios application code we want to update will be copied - to this address - - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY - -3. appl_end_addr - - - Nios application area end address (usually in Flash) - - will be used to unprotect/erase the Flash area while updating - - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_END - -4. appl_ident_addr - - - address of the Nios application identification string - - this is the address checked-up by autoboot - - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT - -5. appl_ident_str - - - the Nios application identification string itself - - default is CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER - -6. appl_name - - - name of file we have to download/update - - default is ADNPESC1/base32/linux.bin - -7. fs_base_addr - - - optionally file system area start address (usually in Flash) - - each file system we want to update will be copied to this address - - default is CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE - -8. fs_end_addr - - - optionally file system area end address (usually in Flash) - - will be used to unprotect/erase the Flash area while updating - - default is CONFIG_SYS_ADNPESC1_FILESYSTEM_END - -9. fs_name - - - name of file we have to download/update - - default is ADNPESC1/base32/romfs.img diff --git a/doc/README.adnpesc1_base32 b/doc/README.adnpesc1_base32 deleted file mode 100644 index e6fb7a4..0000000 --- a/doc/README.adnpesc1_base32 +++ /dev/null @@ -1,469 +0,0 @@ - -TODO: specify IDE i/f - - -=============================================================================== - C P U , M E M O R Y , I N / O U T C O M P O N E N T S -=============================================================================== -see also [1]-[5] - -CPU: "DNP_ESC1" - 32 bit NIOS for 50 MHz - 512 Byte for register file (30 levels) - with out instruction cache - with out data cache - 2 KByte On Chip ROM with GERMS boot monitor - with out On Chip RAM - MSTEP multiplier - no Debug Core - no On Chip Instrumentation (OCI) - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000 - CONFIG_SYS_NIOS_CPU_ICACHE = (not present) - CONFIG_SYS_NIOS_CPU_DCACHE = (not present) - CONFIG_SYS_NIOS_CPU_REG_NUMS = 512 - CONFIG_SYS_NIOS_CPU_MUL = 0 - CONFIG_SYS_NIOS_CPU_MSTEP = 1 - CONFIG_SYS_NIOS_CPU_DBG_CORE = 0 - -IRQ: Nr. | used by - ------+-------------------------------------------------------- - 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16 - 17 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 17 - 18 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 18 - 20 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = - | PIO6 | CONFIG_SYS_NIOS_CPU_PIO6_IRQ = 20 - 25 | SPI0 | CONFIG_SYS_NIOS_CPU_SPI0_IRQ = 25 - 31 | PIO7 | CONFIG_SYS_NIOS_CPU_PIO7_IRQ = 31 - 32 | PIO8 | CONFIG_SYS_NIOS_CPU_PIO8_IRQ = 32 - 33 | PIO9 | CONFIG_SYS_NIOS_CPU_PIO9_IRQ = 33 - 34 | PIO10 | CONFIG_SYS_NIOS_CPU_PIO10_IRQ = 34 - 35 | PIO11 | CONFIG_SYS_NIOS_CPU_PIO11_IRQ = 35 - 36 | PIO12 | CONFIG_SYS_NIOS_CPU_PIO12_IRQ = - | IDE0 | CONFIG_SYS_NIOS_CPU_IDE0_IRQ = 36 - 37 | PIO13 | CONFIG_SYS_NIOS_CPU_PIO13_IRQ = - | IDE1 | CONFIG_SYS_NIOS_CPU_IDE1_IRQ = 37 - -MEMORY: 8 MByte Flash - 16 MByte SDRAM - -Timer: TIMER0: high priority programmable timer (IRQ16) - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0 - CONFIG_SYS_NIOS_CPU_USER_TIMER = (not present) - -PIO: Nr. | description - ------+-------------------------------------------------------- - PIO0 | PORTA: 8 in/outputs for general purpose usage - PIO1 | PORTB: 8 in/outputs for general purpose usage - PIO2 | PORTC: 4 in/outputs for general purpose usage - PIO3 | RCM: 1 input for RCM_EN# jumper (Req.Conf.Mon.) - PIO4 | WDTENA: 1 output to enable the on-board watchdog - PIO5 | WDTTRIG: 1 output to trigger the on-board watchdog - PIO6 | LAN0INT: 1 input for LAN91C111 irq input (IRQ20) - PIO7 | INT1: 1 input for general purpose irq (IRQ31) - PIO8 | INT2: 1 input for general purpose irq (IRQ32) - PIO9 | INT3: 1 input for general purpose irq (IRQ33) - PIO10| INT4: 1 input for general purpose irq (IRQ34) - PIO11| INT5: 1 input for general purpose irq (IRQ35) - PIO12| INT6: 1 input for general purpose irq (IRQ36) - | IDE0INT: (same) for IDE0 irq input - PIO13| INT7: 1 input for general purpose irq (IRQ37) - | IDE1INT: (same) for IDE1 irq input - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_PORTA_PIO = 0 - CONFIG_SYS_NIOS_CPU_PORTB_PIO = 1 - CONFIG_SYS_NIOS_CPU_PORTC_PIO = 2 - CONFIG_SYS_NIOS_CPU_RCM_PIO = 3 - CONFIG_SYS_NIOS_CPU_WDTENA_PIO = 4 - CONFIG_SYS_NIOS_CPU_WDTTRIG_PIO = 5 - CONFIG_SYS_NIOS_CPU_LED_PIO = (not present) - -UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, RTS/CTS (IRQ17) - UART1: fixed baudrate of 115200, fixed protocol 8N1, - without handshake RTS/CTS (IRQ18) - -SPI: SPI0: master capable, 1 slave selectable, 250kHz target clock, - 2 usec targets delay between slave select and clock, - data is transferred MSB-first / LSB-last (IRQ25) - -LAN: SMsC LAN91C111 with: - - without offset - - data bus width 16 bit (on-board hard wired at 32 bit bus) - - !!! 32 bit bus access --> each address * 2 !!! - -IDE: (TODO) - - -=============================================================================== - M E M O R Y M A P -=============================================================================== - -- - - - - - - - - - - external extension - - - - - - - - - - - - - - - - - - - - - 0x44000000 ---32-----------16|15------------0- - | | | \ - : (real size : : | - EXT3 (CS4) : and content : : > CONFIG_SYS_NIOS_CPU_CS3_SIZE - : unknown) : : | = 0x01000000 - | | | / - 0x43000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS3_BASE - | | | \ - : (real size : : | - EXT2 (CS3) : and content : : > CONFIG_SYS_NIOS_CPU_CS2_SIZE - : unknown) : : | = 0x01000000 - | | | / - 0x42000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS2_BASE - | | | \ - : (real size : : | - EXT1 (CS2) : and content : : > CONFIG_SYS_NIOS_CPU_CS1_SIZE - : unknown) : : | = 0x01000000 - | | | / - 0x41000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS1_BASE - | | | \ - : (real size : : | - EXT0 (CS1) : and content : : > CONFIG_SYS_NIOS_CPU_CS0_SIZE - : unknown) : : | = 0x01000000 - | | | / - 0x40000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS0_BASE - | | - : gap : - : : - -- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x03000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_STACK - | . | \ - | . | | (U-Boot run-time system) - | . | | - | . | > CONFIG_SYS_MONITOR_LEN - | . | | = 0x00040000 - | . | | - | . | / - 0x02fc0000 --+32-----------16|15------------0+ TEXT_BASE - | . | \ - | . | > CONFIG_SYS_MALLOC_LEN (heap) - | . | / - --+32-----------16|15------------0+ - | . | \ - | . | > CONFIG_SYS_GBL_DATA_SIZE (global) - | . | / - --+32-----------16|15------------0+ CONFIG_SYS_INIT_SP (u-boot stack) - | . | \ \ - | . | | | - | . | | > stack area - | . | | | - | . | | V - | . | | - | . | | - SDRAM | . | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE - | . | | = 0x01000000 - | . | | - 0x02000100 |- - - - - - - - - - - - - - - -+-|- - | . | | \ - | . | | | - | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE - | . | | | = 0x00000100 - | | / / - 0x02000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE - 0x02000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE - | | \ - : gap : > (space for 2nd Flash) - | | / - 0x01800000 ---32-----------16|15------------0- - | sector 127 | \ - + 0x7f0000 |- - - - - - - - - - - - - - - -| | - | : | | - Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE - | sector 1 : | | = 0x00800000 - + 0x010000 |- - - - - - - - - - - - - - - -| | - | sector 0 (size = 0x10000) | / - 0x01000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE - | | - : gap : - : : - -- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x00010020 ---32-----------16|15------------0- - | | \ - | register bank | | - | size = (real_size << 1) | | - | real_size = 0x10 | | - | +--------.---.---.--- | | - | | bank 0 \ 1 \ 2 \ 3 \ | | - | |---------------------------+ | | - LAN91C111 | | BANK | RESERVED | | > na_enet_size - | |- - - - - - -|- - - - - - -| | | = 0x00000020 - | | RPCR | MIR | | | - | |- - - - - - -|- - - - - - -| | | - | | COUNTER | RCR | | | - | |- - - - - - -|- - - - - - -| | | - | | EPH STATUS | TCR | | | - | +---------------------------+ | / - 0x00010000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE - | | - : gap : - : : - -- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x00001040 ---32-----------16|15------------0- - | | | \ - : : : | - IDE1 i/f : : : > 0x00000020 - [5] : : : | - | | | / - 0x00001020 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE1 - | | | \ - : : : | - IDE0 i/f : : : > 0x00000020 - [5] : : : | - | | | / - 0x00001000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0 - | | - : gap : - | | - 0x00000980 ---32-----------16|15------------0- - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO13 | interruptmask (1 bit) (rw) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO13 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO12 | interruptmask (1 bit) (rw) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO12 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO11 | interruptmask (1 bit) (rw) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000950 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO11 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO10 | interruptmask (1 bit) (rw) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO10 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO9 | interruptmask (1 bit) (rw) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000930 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO9 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO8 | interruptmask (1 bit) (rw) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000920 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO8 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO7 | interruptmask (1 bit) (rw) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000910 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO6 | interruptmask (1 bit) (rw) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6 - | | - : gap : - | | - 0x000008e0 ---32-----------16|15------------0- - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | endofpacket (16 bit) (rw) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | slaveselect (1 bit) (rw) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - SPI0 | (reserved) | | - [4] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | control (11 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (9 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (16 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (16 bit) (ro) | / - 0x000008c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SPI0 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO5 | (unused) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x000008b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO4 | (unused) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x000008a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO3 | (unused) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x00000890 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO2 | (unused) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (4 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (4 bit) (rw) | / - 0x00000880 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO1 | (unused) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (8 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (8 bit) (rw) | / - 0x00000870 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO0 | (unused) | | - [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (8 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (8 bit) (rw) | / - 0x00000860 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | snaph (16 bit) (rw) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER0 | snapl (16 bit) (rw) | | - [2] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | periodh (16 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | periodl (16 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (4 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x00000840 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART1 | (unused) | > 0x00000020 - [1] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x00000820 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART0 | (unused) | > 0x00000020 - [1] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x00000800 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0 - -- - - - - - - - - - - on chip memory 1 - - - - - - - - - - - - - 0x00000800 ---32-----------16|15------------0- - | : | \ - | : | | - GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE - | : | | = 0x00000800 - | : | / - 0x00000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT - 0x00000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE - - -=============================================================================== - F L A S H M E M O R Y A L L O C A T I O N -=============================================================================== - - 0x01800000 ---8-------------4|3-------------0- - | : | \ - | : | | - | : | > 6 MByte ROM FS - | : | | - | : | / - 0x01200000 --+- - - - - - - -:- - - - - - - -+- - file system image(s) - | : | \ - | : | | - | : | > 1728 kByte ucLinux - | : | | - | : | / - 0x01050000 --+- - - - - - - -:- - - - - - - -+- - os image(s) - | : | \ - 0x01040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment - | : | | - | : | > 320 kByte U-Boot - | : | | - | : | | - | : | / - 0x01000000 --+- - - - - - - -:- - - - - - - -+- - u-boot _start() - 0x01000000 ---8-------------4|3-------------0- - - -=============================================================================== - R E F E R E N C E S -=============================================================================== -[1] http://www.altera.com/literature/ds/ds_nios_uart.pdf -[2] http://www.altera.com/literature/ds/ds_nios_timer.pdf -[3] http://www.altera.com/literature/ds/ds_nios_pio.pdf -[4] http://www.altera.com/literature/ds/ds_nios_spi.pdf -[5] http://www.t13.org/index.html - - -=============================================================================== -Stephan Linz <linz@li-pro.net> diff --git a/doc/README.dk1c20 b/doc/README.dk1c20 deleted file mode 100644 index 3c0e41b..0000000 --- a/doc/README.dk1c20 +++ /dev/null @@ -1,153 +0,0 @@ - - Nios Development Kit - Cyclone Editions - - Last Update: January 2, 2004 -==================================================================== - -This file contains information regarding U-Boot and the Altera -Nios Development Kit, Cyclone Edition (DK-1C20). For general Nios -information see doc/README.nios. - -For those interested in contributing ... see HELP WANTED section -in doc/README.nios. - -Contents: - - 1. Files - 2. Memory Organization - 3. Examples - 4. Programming U-Boot into FLASH with GERMS - 5. Active Serial Memory Interface (ASMI) Support - -==================================================================== - -1. Files -========= - board/altera/dk1c20/* - include/configs/DK1C20.h - -2. Memory Organization -======================= - - -The heap is placed below the monitor (U-Boot code). - -Global data is placed below the heap. - -The stack is placed below global data (&grows down). - -3. Examples -============ - -The hello_world example works fine. The default load address -is 0x0100_0000 (the start of SDRAM). - - -4. Programming U-Boot into FLASH with GERMS -============================================ -The current version of the DK-1C20 port with the default -configuration settings occupies about 81 KBytes of flash. -A minimal configuration occupies less than 60 KByte (asmi -and network support disabled). - -To program U-Boot into the DK-1C20 flash using GERMS do the -following: - -1. From the command line, download U-Boot using the nios-run: - - $ nios-run -r u-boot.srec - -This takes about 45 seconds (GERMS is not very speedy here). -After u-boot is downloaded it will be executed. You should -see the following: - - U-Boot 1.0.0-pre (Oct 4 2003 - 07:39:24) - - CPU: Nios-32 Rev. 3.3 (0x3038) - Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14 - Board: Altera Nios 1C20 Development Kit - In: serial - Out: serial - Err: serial - ==> - - -2. Quit nios-run and start your terminal application (e.g. start -Hyperterminal or minicom). - -3. Download the u-boot code to RAM. When using Hyperterminal, do the -following: - - a. From the u-boot command prompt start a binary download to SRAM: - - ==> loadb 800000 - - b. Download u-boot.bin using kermit. - -4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff: - - ==> erase 1:4-5 - -5. Copy the binary image from SRAM to flash: - - ==> cp.b 800000 40000 10000 - -U-Boot will now automatically start when the board is powered on or -reset using the Standard-32 configuration. To start U-Boot with the -Safe-32 configuration, enter the following GERMS command: - - + g 40000 - -5. Active Serial Memory Interface (ASMI) Support -================================================ -ASMI is fully supported in U-Boot. Please note that ASMI is supported -only on Cyclone devices. Do not expect ASMI to work with Stratix or -APEX devices. - - ************* IMPORTANT ************* - =================================================== - IN ORDER FOR THE NIOS ASMI TO OPERATE PROPERLY, THE - CYCLONE DEVICE MUST BE CONFIGURED USING JTAG OR ASMI. - -There are two techniques you can use to bootstrap the ASMI. The -first is to use the program_epcs utility that is part of Altera's SDK. -But I've found program_epcs to be slow and cumbersome at best. - -An undocumented alternative is to use the Quartus device programing -interface: - - 1. Select "Active Serial" mode. - - 2. Choose the xxx.pof file. For example, for the standard_32 - configuration use the "standard_32.pof" file. - - 3. Attach your ByteBlaster to J28. Make sure you have the - cable attached properly -- the orientation of J28 is - different than J24 (the JTAG header). On J28, pin 1 is on - the bottom row, left-most pin. - - 4. Press and hold the "Power-On Reset" switch (SW10). You will - see the green "Loading" and red "Error" LEDs (LED3 and LED4) - in the on state. - - 5. While holding down the "Power-On Reset" switch, start the - programming sequence. This only takes about 10 seconds. - - 6. After programming is complete, release the "Power-On Reset" - switch. The Cyclone device should now load its configuration - from the EPCS4 (U59). The green "User" LED (LED 1) should be - blinking if the device was successfully loaded via ASMI. - - 7. Remove the ByteBlaster cable. The cable must be removed to - allow the Nios ASMI access to the EPCS4 device. - -After you have successfully programmed a configuration into the -EPCS4, the ASMI will be used to load the Cyclone configuration -unless the "Force Safe" switch (SW9) is pressed. - -NOTE: To maximize the amount of space available for program use, -you can enable configuration compression in Quartus. With compression -enabled, the size of the standard_32 configuration data is -approximately 192 KBytes. - -To use the U-Boot ASMI commands, try typing "help asmi" at the -command prompt. The command "asmi info" will show the current -status of the ASMI. diff --git a/doc/README.dk1c20_std32 b/doc/README.dk1c20_std32 deleted file mode 100644 index 2be1299..0000000 --- a/doc/README.dk1c20_std32 +++ /dev/null @@ -1,366 +0,0 @@ - -TODO: specify IDE i/f - specify ASMI i/f - specify OCI - - -=============================================================================== - C P U , M E M O R Y , I N / O U T C O M P O N E N T S -=============================================================================== -see also [1]-[6] - -CPU: "standard_32" - 32 bit NIOS for 50 MHz - 256 Byte for register file (15 levels) - 4 KByte instruction cache (2 bytes in each cache line) - 4 KByte data cache (4 bytes in each cache line) - 2 KByte On Chip ROM with GERMS boot monitor - no On Chip RAM - MSTEP multiplier - no Debug Core - On Chip Instrumentation (OCI) enabled - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000 - CONFIG_SYS_NIOS_CPU_ICACHE = 4096 - CONFIG_SYS_NIOS_CPU_DCACHE = 4096 - CONFIG_SYS_NIOS_CPU_REG_NUMS = 256 - CONFIG_SYS_NIOS_CPU_MUL = 0 - CONFIG_SYS_NIOS_CPU_MSTEP = 1 - CONFIG_SYS_NIOS_CPU_DBG_CORE = 0 - -OCI: (TODO) - -IRQ: Nr. | used by - ------+-------------------------------------------------------- - 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16 - 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25 - 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30 - 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35 - 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40 - 45 | ASMI | CONFIG_SYS_NIOS_CPU_ASMI0_IRQ = 45 - 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50 - -MEMORY: 8 MByte Flash - 1 MByte SRAM - 16 MByte SDRAM - -ASMI: (TODO) <-- ASMI part is 4M bits - -Timer: TIMER0: high priority programmable timer (IRQ16) - TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50) - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1 - CONFIG_SYS_NIOS_CPU_USER_TIMER = 0 - -PIO: Nr. | description - ------+-------------------------------------------------------- - PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40) - PIO1 | LCD: 11 in/outputs for ASCII LCD - PIO2 | LED: 8 outputs for user LEDs - PIO3 | SEVENSEG: 16 outputs for user seven segment display - PIO4 | RECONF: 1 in/output for . . . . . . . . . . . . - PIO5 | CFPRESENT: 1 input for CF present event (IRQ35) - PIO6 | CFPOWER: 1 output to controll CF power supply - PIO7 | CFATASEL: 1 output to controll CF ATA card select - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0 - CONFIG_SYS_NIOS_CPU_LCD_PIO = 1 - CONFIG_SYS_NIOS_CPU_LED_PIO = 2 - CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3 - CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4 - CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5 - CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6 - CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7 - -UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, - without handshake RTS/CTS (IRQ25) - -LAN: SMsC LAN91C111 with: - - offset 0x300 (LAN91C111_REGISTERS_OFFSET) - - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH) - -IDE: (TODO) - - -=============================================================================== - M E M O R Y M A P -=============================================================================== - -- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - - - - 0x02000000 ---32-----------16|15------------0- - | : | \ - | : | | - SDRAM | : | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE - | : | | = 0x01000000 - | : | / - 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE - | | - : gap : - : : - -- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x________ ---32-----------16|15------------0- - | | | \ - : (real size : : | - ASMI i/f : and content : : > 0x________ - [5] : unknown) : : | - | | | / - 0x00920b00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ASMI0 - | | - : gap : - | | - 0x00920a80 ---32-----------16|15------------0- - | | | \ - : (real size : : | - IDE i/f : and content : : > 0x00000080 - [6] : unknown) : : | - | | | / - 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER1 | (unused) | | - [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | (unused) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (1 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO7 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO6 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO5 | interruptmask (1 bit) (rw) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO4 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (1 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (rw) | / - 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO3 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (16 bit) (wo) | / - 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO2 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (8 bit) (wo) | / - 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO1 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (11 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (11 bit) (rw) | / - 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1 - | edgecapture (4 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO0 | interruptmask (4 bit) (rw) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (4 bit) (ro) | / - 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | snaph (16 bit) (rw) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER0 | snapl (16 bit) (rw) | | - [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | periodh (16 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | periodl (16 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (4 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0 - | | \ - : gap : > (space for UART1) - | | / - 0x00920920 ---32-----------16|15------------0- - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART0 | (unused) | > 0x00000020 - [2] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0 - -- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - - - - 0x00920900 ----------------------------------- - | | \ - : (real size : | - OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE - : unknown) : | = 0x00000100 - | | / - 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE - -- - - - - - - - - - - on chip memory - - - - - - - - - - - - - 0x00920800 ---32-----------16|15------------0- - | : | \ - | : | | - GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE - | : | | = 0x00000800 - | : | / - 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT - 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE - -- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - - - - 0x00920000 ---32-----------16|15------------0- - | gap | \ - 0x00910310 --+-------------------------------| | - | | | - | register bank (size = 0x10) | | - | +--------.---.---.--- | | - | | bank 0 \ 1 \ 2 \ 3 \ | | - | |---------------------------+ | | - LAN91C111 | | BANK | RESERVED | | | - | |- - - - - - -|- - - - - - -| | > na_lan91c111_size - | | RPCR | MIR | | | = 0x00010000 - | |- - - - - - -|- - - - - - -| | | - | | COUNTER | RCR | | | - | |- - - - - - -|- - - - - - -| | | - | | EPH STATUS | TCR | | | - | +---------------------------+ | | - 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| | - | gap | / - 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE - | | - : gap : - : : - -- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x00900000 ---32-----------16|15------------0- - 0x00900000 --+32-----------16|15------------0+ - | : | \ \ - | : | | | - | : | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE - | : | | | = 0x00000100 - | : | | / - 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE - 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK - | : | | \ - | : | | | - | : | | > stack area - | : | | | - | : | | V - | : | | - SRAM | : | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE - | : | | = 0x00100000 - | : | / - 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE - 0x00800000 ---8-------------4|3-------------0- - | sector 127 | \ - + 0x7f0000 |- - - - - - - - - - - - - - - -| | - | : | | - Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE - | sector 1 : | | = 0x00800000 - + 0x010000 |- - - - - - - - - - - - - - - -| | - | sector 0 (size = 0x10000) | / - 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE - - -=============================================================================== - F L A S H M E M O R Y A L L O C A T I O N -=============================================================================== - - 0x00800000 ---8-------------4|3-------------0- - | : | \ - SAFE | : | > 1 MByte - FPGA conf. | : | / (NOT usable by software) - 0x00700000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - USER | : | > 1 MByte - FPGA conf. | : | / (NOT usable by software) - 0x00600000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - WEB pages | : | > 2 MByte - | : | | (provisory usable) - | : | / - 0x00400000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - | : | | - | : | > 4 MByte free for use - | : | | - 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start() - | : | / - 0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment - 0x00000000 ---8-------------4|3-------------0- - - -=============================================================================== - R E F E R E N C E S -=============================================================================== -[1] http://www.altera.com/literature/manual/mnl_nios_board_cyclone_1c20.pdf -[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf -[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf -[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf -[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf - http://www.altera.com/literature/wp/wp_epcs_cyc.pdf -[6] http://www.opencores.org/projects/ata/ - http://www.t13.org/index.html - - -=============================================================================== -Stephan Linz <linz@li-pro.net> diff --git a/doc/README.dk1s10 b/doc/README.dk1s10 deleted file mode 100644 index 622bef5..0000000 --- a/doc/README.dk1s10 +++ /dev/null @@ -1,131 +0,0 @@ - - Nios Development Kit - Startix Editions - - Last Update: January 28, 2004 -==================================================================== - -This file contains information regarding U-Boot and the Altera -Nios Development Kit, Startix Edition (DK-1S10). For general Nios -information see doc/README.nios. - -Most stuff of this file was borrowed and based on README.dk1c20, -the DK-1C20 related information file. - -For those interested in contributing ... see HELP WANTED section -in doc/README.nios. - -Contents: - - 1. Files - 2. Memory Organization - 3. CPU Variations - 4. Examples - 5. Programming U-Boot into FLASH with GERMS - -==================================================================== - -1. Files -========= - board/altera/dk1s10/* - include/configs/DK1S10.h - -2. Memory Organization -======================= - - -The heap is placed below the monitor (U-Boot code). - -Global data is placed below the heap. - -The stack is placed below global data (&grows down). - -3. CPU Variations -================= - -There are more than one NIOS CPU variation for the DK-1S10. U-Boot -supports the following CPU configurations: - - - Altera Standard 32 (make DK1S10_standard_32_config) - - Microtronix LDK 2.0 (make DK1S10_mtx_ldk_20_config) - -4. Examples -============ - -The hello_world example was never tested on DK-1S10. Neverthelse -it should work as far as possible, because the DK-1S10 port is -more than ninetieth percents equal to the DK-1C20 port and at -this platform the hello_world example was already tested -successfully (see README.dk1c20). - - -5. Programming U-Boot into FLASH with GERMS -============================================ -The current version of the DK-1S10 port with the default -configuration settings occupies about 78 KBytes of flash. -A minimal configuration occupies less than 60 KByte -(network support disabled). - -To program U-Boot into the DK-1S10 flash using GERMS do the -following: - -1. From the command line, download U-Boot using the nios-run: - - $ nios-run -r u-boot.srec - -This takes about 45 seconds (GERMS is not very speedy here). -After u-boot is downloaded it will be executed. You should -see the following: - - U-Boot 1.0.2 (Jan 28 2004 - 19:02:30) - - CPU: Nios-32 Rev. 3.3 (0x3038) - Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14 - Board: Altera Nios 1S10 Development Kit - In: serial - Out: serial - Err: serial - DK1S10 > - - -2. Quit nios-run and start your terminal application (e.g. start - Hyperterminal or minicom). - -3. Download the u-boot code to RAM. When using Hyperterminal, do the - following: - - a. From the u-boot command prompt start a binary download to - SRAM / SDRAM: - - at the Altera Standard 32 to SRAM: - - ==> loadb 800000 - - at the Microtronix LDK 2.0 to SDRAM: - - ==> loadb 1010000 - - b. Download u-boot.bin using kermit. - -4. From the U-Boot command prompt, erase flash: - - at the Altera Standard 32 from 0x40000 to 0x5ffff: - - ==> erase 1:4-5 - - at the Microtronix LDK 2.0 from 0x8000000 to 0x81ffff: - - ==> erase 1:0-1 - -5. Copy the binary image from SRAM / SDRAM to flash: - - at the Altera Standard 32 to SRAM: - - ==> cp.b 800000 40000 ${filesize} - - at the Microtronix LDK 2.0 to SDRAM: - - ==> cp.b 1010000 8000000 ${filesize} - -U-Boot will now automatically start when the board is powered on or -reset using the Standard-32 configuration. To start U-Boot with the -Safe-32 configuration, enter the following GERMS command: - - + g 40000 diff --git a/doc/README.dk1s10_mldk20 b/doc/README.dk1s10_mldk20 deleted file mode 100644 index 74e07a9..0000000 --- a/doc/README.dk1s10_mldk20 +++ /dev/null @@ -1,286 +0,0 @@ - -TODO: specify IDE i/f - - -=============================================================================== - C P U , M E M O R Y , I N / O U T C O M P O N E N T S -=============================================================================== -see also [1]-[5] - -CPU: "LDK2" - 32 bit NIOS for 75 MHz - 512 Byte for register file (30 levels) - with out instruction cache - with out data cache - 2 KByte On Chip ROM with GERMS boot monitor - with out On Chip RAM - MSTEP multiplier - no Debug Core - no On Chip Instrumentation (OCI) - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 75000000 - CONFIG_SYS_NIOS_CPU_ICACHE = (not present) - CONFIG_SYS_NIOS_CPU_DCACHE = (not present) - CONFIG_SYS_NIOS_CPU_REG_NUMS = 512 - CONFIG_SYS_NIOS_CPU_MUL = 0 - CONFIG_SYS_NIOS_CPU_MSTEP = 1 - CONFIG_SYS_NIOS_CPU_DBG_CORE = 0 - -IRQ: Nr. | used by - ------+-------------------------------------------------------- - 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16 - 17 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 17 - 18 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 18 - 20 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 20 - 25 | IDE0 | CONFIG_SYS_NIOS_CPU_IDE0_IRQ = 25 - -MEMORY: 8 MByte Flash - 16 MByte SDRAM - -Timer: TIMER0: high priority programmable timer (IRQ16) - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0 - CONFIG_SYS_NIOS_CPU_USER_TIMER = (not present) - -PIO: Nr. | description - ------+-------------------------------------------------------- - PIO0 | CFPOWER: 1 output to controll CF power supply - PIO1 | BUTTON: 4 inputs for user push buttons (no IRQ) - ------+-------------------------------------------------------- - not | LCD: 11 in/outputs for ASCII LCD - pres.| LED: 8 outputs for user LEDs - | SEVENSEG: 16 outputs for user seven segment display - | RECONF: 1 in/output for . . . . . . . . . . . . - | CFPRESENT: 1 input for CF present event (IRQ35) - | CFATASEL: 1 output to controll CF ATA card select - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 1 - CONFIG_SYS_NIOS_CPU_LCD_PIO = (not present) - CONFIG_SYS_NIOS_CPU_LED_PIO = (not present) - CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = (not present) - CONFIG_SYS_NIOS_CPU_RECONF_PIO = (not present) - CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = (not present) - CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 0 - CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = (not present) - -UART: UART0: fixed baudrate of 115200, fixed protocol 8N2, - without handshake RTS/CTS (IRQ17) - UART1: fixed baudrate of 115200, fixed protocol 8N1, - without handshake RTS/CTS (IRQ18) - -LAN: SMsC LAN91C111 with: - - offset 0x300 (LAN91C111_REGISTERS_OFFSET) - - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH) - -IDE: (TODO) - - -=============================================================================== - M E M O R Y M A P -=============================================================================== - -- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - - - - 0x02000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_STACK - 0x02000000 --+32-----------16|15------------0+ - | . | \ \ - | . | | | - | . | | > stack area - | . | | | - | . | | V - | . | | - | . | | - SDRAM | . | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE - | . | | = 0x01000000 - | . | | - 0x01000100 |- - - - - - - - - - - - - - - -+-|- - | . | | \ - | . | | | - | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE - | . | | | = 0x00000100 - | | / / - 0x01000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE - 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE - | sector 127 | \ - + 0x7f0000 |- - - - - - - - - - - - - - - -| | - | : | | - Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE - | sector 1 : | | = 0x00800000 - + 0x010000 |- - - - - - - - - - - - - - - -| | - | sector 0 (size = 0x10000) | / - 0x00800000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE - | | - : gap : - : : - -- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x00020000 ---32-----------16|15------------0- - | gap | \ - 0x00010310 --+-------------------------------| | - | | | - | register bank (size = 0x10) | | - | +--------.---.---.--- | | - | | bank 0 \ 1 \ 2 \ 3 \ | | - | |---------------------------+ | | - LAN91C111 | | BANK | RESERVED | | | - | |- - - - - - -|- - - - - - -| | > na_enet_size - | | RPCR | MIR | | | = 0x00010000 - | |- - - - - - -|- - - - - - -| | | - | | COUNTER | RCR | | | - | |- - - - - - -|- - - - - - -| | | - | | EPH STATUS | TCR | | | - | +---------------------------+ | | - 0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| | - | gap | / - 0x00010000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE - | | - : gap : - : : - -- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x00000980 ---32-----------16|15------------0- - | | | \ - : (real size : : | - IDE i/f : and content : : > 0x00000080 - [5] : unknown) : : | - | | | / - 0x00000900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0 - | | \ - : gap : > (space for PIO4..7) - | | / - 0x000008c0 ---32-----------16|15------------0- - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART1 | (unused) | > 0x00000020 - [2] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x000008a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1 - | | \ - : gap : > (space for PIO2..3) - | | / - 0x00000880 ---32-----------16|15------------0- - | edgecapture (4 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO1 | interruptmask (4 bit) (rw) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (4 bit) (ro) | / - 0x00000870 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO0 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x00000860 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | snaph (16 bit) (rw) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER0 | snapl (16 bit) (rw) | | - [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | periodh (16 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | periodl (16 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (4 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x00000840 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0 - | | \ - : gap : > (space for UART2) - | | / - 0x00000820 ---32-----------16|15------------0- - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART0 | (unused) | > 0x00000020 - [2] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x00000800 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0 - -- - - - - - - - - - - on chip memory 1 - - - - - - - - - - - - - 0x00000800 ---32-----------16|15------------0- - | : | \ - | : | | - GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE - | : | | = 0x00000800 - | : | / - 0x00000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT - 0x00000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE - -=============================================================================== - F L A S H M E M O R Y A L L O C A T I O N -=============================================================================== - - 0x01000000 ---8-------------4|3-------------0- - | : | \ - SAFE | : | > 1 MByte - FPGA conf. | : | / (NOT usable by software) - 0x00f00000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - USER | : | > 1 MByte - FPGA conf. | : | / (NOT usable by software) - 0x00e00000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - WEB pages | : | > 2 MByte - | : | | (provisory usable) - | : | / - 0x00c00000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - | : | | - | : | > 4 MByte free for use - | : | | - 0x00840000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment - | : | / - 0x00800000 |- - - - - - - -:- - - - - - - -+- - u-boot _start() - 0x00800000 ---8-------------4|3-------------0- - - -=============================================================================== - R E F E R E N C E S -=============================================================================== -[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf -[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf -[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf -[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf -[5] http://www.opencores.org/projects/ata/ - http://www.t13.org/index.html - - -=============================================================================== -Stephan Linz <linz@li-pro.net> diff --git a/doc/README.dk1s10_std32 b/doc/README.dk1s10_std32 deleted file mode 100644 index 622b2b9..0000000 --- a/doc/README.dk1s10_std32 +++ /dev/null @@ -1,354 +0,0 @@ - -TODO: specify IDE i/f - specify OCI - - -=============================================================================== - C P U , M E M O R Y , I N / O U T C O M P O N E N T S -=============================================================================== -see also [1]-[5] - -CPU: "standard_32" - 32 bit NIOS for 50 MHz - 256 Byte for register file (15 levels) - 4 KByte instruction cache (4 bytes in each cache line) - 4 KByte data cache (4 bytes in each cache line) - 2 KByte On Chip ROM with GERMS boot monitor - 64 KByte On Chip RAM - MSTEP multiplier - no Debug Core - On Chip Instrumentation (OCI) enabled - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000 - CONFIG_SYS_NIOS_CPU_ICACHE = 4096 - CONFIG_SYS_NIOS_CPU_DCACHE = 4096 - CONFIG_SYS_NIOS_CPU_REG_NUMS = 256 - CONFIG_SYS_NIOS_CPU_MUL = 0 - CONFIG_SYS_NIOS_CPU_MSTEP = 1 - CONFIG_SYS_NIOS_CPU_DBG_CORE = 0 - -OCI: (TODO) - -IRQ: Nr. | used by - ------+-------------------------------------------------------- - 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16 - 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25 - 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30 - 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35 - 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40 - 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50 - -MEMORY: 8 MByte Flash - 1 MByte SRAM - 16 MByte SDRAM - -Timer: TIMER0: high priority programmable timer (IRQ16) - TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50) - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1 - CONFIG_SYS_NIOS_CPU_USER_TIMER = 0 - -PIO: Nr. | description - ------+-------------------------------------------------------- - PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40) - PIO1 | LCD: 11 in/outputs for ASCII LCD - PIO2 | LED: 8 outputs for user LEDs - PIO3 | SEVENSEG: 16 outputs for user seven segment display - PIO4 | RECONF: 1 in/output for . . . . . . . . . . . . - PIO5 | CFPRESENT: 1 input for CF present event (IRQ35) - PIO6 | CFPOWER: 1 output to controll CF power supply - PIO7 | CFATASEL: 1 output to controll CF ATA card select - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0 - CONFIG_SYS_NIOS_CPU_LCD_PIO = 1 - CONFIG_SYS_NIOS_CPU_LED_PIO = 2 - CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3 - CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4 - CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5 - CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6 - CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7 - -UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, - without handshake RTS/CTS (IRQ25) - -LAN: SMsC LAN91C111 with: - - offset 0x300 (LAN91C111_REGISTERS_OFFSET) - - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH) - -IDE: (TODO) - - -=============================================================================== - M E M O R Y M A P -=============================================================================== - -- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - - - - 0x02000000 ---32-----------16|15------------0- - | : | \ - | : | | - SDRAM | : | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE - | : | | = 0x01000000 - | : | / - 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE - | | - : gap : - : : - -- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x00920a80 ---32-----------16|15------------0- - | | | \ - : (real size : : | - IDE i/f : and content : : > 0x00000080 - [5] : unknown) : : | - | | | / - 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER1 | (unused) | | - [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | (unused) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (1 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO7 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO6 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO5 | interruptmask (1 bit) (rw) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO4 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (1 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (rw) | / - 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO3 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (16 bit) (wo) | / - 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO2 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (8 bit) (wo) | / - 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO1 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (11 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (11 bit) (rw) | / - 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1 - | edgecapture (4 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO0 | interruptmask (4 bit) (rw) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (4 bit) (ro) | / - 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | snaph (16 bit) (rw) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER0 | snapl (16 bit) (rw) | | - [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | periodh (16 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | periodl (16 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (4 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0 - | | \ - : gap : > (space for UART1) - | | / - 0x00920920 ---32-----------16|15------------0- - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART0 | (unused) | > 0x00000020 - [2] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0 - -- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - - - - 0x00920900 ----------------------------------- - | | \ - : (real size : | - OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE - : unknown) : | = 0x00000100 - | | / - 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE - -- - - - - - - - - - - on chip memory 2 - - - - - - - - - - - - - 0x00920800 ---32-----------16|15------------0- - | : | \ - | : | | - GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE - | : | | = 0x00000800 - | : | / - 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT - 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE - -- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - - - - 0x00920000 ---32-----------16|15------------0- - | gap | \ - 0x00910310 --+-------------------------------| | - | | | - | register bank (size = 0x10) | | - | +--------.---.---.--- | | - | | bank 0 \ 1 \ 2 \ 3 \ | | - | |---------------------------+ | | - LAN91C111 | | BANK | RESERVED | | | - | |- - - - - - -|- - - - - - -| | > na_lan91c111_size - | | RPCR | MIR | | | = 0x00010000 - | |- - - - - - -|- - - - - - -| | | - | | COUNTER | RCR | | | - | |- - - - - - -|- - - - - - -| | | - | | EPH STATUS | TCR | | | - | +---------------------------+ | | - 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| | - | gap | / - 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE - -- - - - - - - - - - - on chip memory 1 - - - - - - - - - - - - - 0x00910000 ---32-----------16|15------------0- - | : | \ - | : | | - onchip RAM | : | > CONFIG_SYS_NIOS_CPU_RAM_SIZE - | : | | = 0x00010000 - | : | / - 0x00900000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_RAM_BASE - -- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - - - - 0x00900000 ---32-----------16|15------------0- - 0x00900000 --+32-----------16|15------------0+ - | . | \ \ - | . | | | - | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE - | . | | | = 0x00000100 - | . | | / - 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE - 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK - | . | | \ - | . | | | - | . | | > stack area - | . | | | - | . | | V - | . | | - SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE - | . | | = 0x00100000 - | | / - 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE - 0x00800000 ---8-------------4|3-------------0- - | sector 127 | \ - + 0x7f0000 |- - - - - - - - - - - - - - - -| | - | : | | - Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE - | sector 1 : | | = 0x00800000 - + 0x010000 |- - - - - - - - - - - - - - - -| | - | sector 0 (size = 0x10000) | / - 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE - - -=============================================================================== - F L A S H M E M O R Y A L L O C A T I O N -=============================================================================== - - 0x00800000 ---8-------------4|3-------------0- - | : | \ - SAFE | : | > 1 MByte - FPGA conf. | : | / (NOT usable by software) - 0x00700000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - USER | : | > 1 MByte - FPGA conf. | : | / (NOT usable by software) - 0x00600000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - WEB pages | : | > 2 MByte - | : | | (provisory usable) - | : | / - 0x00400000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - | : | | - | : | > 4 MByte free for use - | : | | - 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start() - | : | / - 0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment - 0x00000000 ---8-------------4|3-------------0- - - -=============================================================================== - R E F E R E N C E S -=============================================================================== -[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf -[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf -[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf -[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf -[5] http://www.opencores.org/projects/ata/ - http://www.t13.org/index.html - - -=============================================================================== -Stephan Linz <linz@li-pro.net> diff --git a/doc/README.dk1s40_std32 b/doc/README.dk1s40_std32 deleted file mode 100644 index 9a0ea06..0000000 --- a/doc/README.dk1s40_std32 +++ /dev/null @@ -1,355 +0,0 @@ - -TODO: specify IDE i/f - specify OCI - - -=============================================================================== - C P U , M E M O R Y , I N / O U T C O M P O N E N T S -=============================================================================== -see also [1]-[5] - -CPU: "standard_32" - 32 bit NIOS for 50 MHz - 256 Byte for register file (15 levels) - 4 KByte instruction cache (4 bytes in each cache line) - 4 KByte data cache (4 bytes in each cache line) - 2 KByte On Chip ROM with GERMS boot monitor - 64 KByte On Chip RAM - MSTEP multiplier - no Debug Core - On Chip Instrumentation (OCI) enabled - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000 - CONFIG_SYS_NIOS_CPU_ICACHE = 4096 - CONFIG_SYS_NIOS_CPU_DCACHE = 4096 - CONFIG_SYS_NIOS_CPU_REG_NUMS = 256 - CONFIG_SYS_NIOS_CPU_MUL = 0 - CONFIG_SYS_NIOS_CPU_MSTEP = 1 - CONFIG_SYS_NIOS_CPU_DBG_CORE = 0 - -OCI: (TODO) - -IRQ: Nr. | used by - ------+-------------------------------------------------------- - 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16 - 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25 - 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30 - 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35 - 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40 - 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50 - -MEMORY: 8 MByte Flash - 1 MByte SRAM - 16 MByte SDRAM - -Timer: TIMER0: high priority programmable timer (IRQ16) - TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50) - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1 - CONFIG_SYS_NIOS_CPU_USER_TIMER = 0 - -PIO: Nr. | description - ------+-------------------------------------------------------- - PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40) - PIO1 | LCD: 11 in/outputs for ASCII LCD - PIO2 | LED: 8 outputs for user LEDs - PIO3 | SEVENSEG: 16 outputs for user seven segment display - PIO4 | RECONF: 1 in/output for . . . . . . . . . . . . - PIO5 | CFPRESENT: 1 input for CF present event (IRQ35) - PIO6 | CFPOWER: 1 output to controll CF power supply - PIO7 | CFATASEL: 1 output to controll CF ATA card select - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0 - CONFIG_SYS_NIOS_CPU_LCD_PIO = 1 - CONFIG_SYS_NIOS_CPU_LED_PIO = 2 - CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3 - CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4 - CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5 - CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6 - CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7 - -UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, - without handshake RTS/CTS (IRQ25) - -LAN: SMsC LAN91C111 with: - - offset 0x300 (LAN91C111_REGISTERS_OFFSET) - - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH) - -IDE: (TODO) - - -=============================================================================== - M E M O R Y M A P -=============================================================================== - -- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - - - - 0x02000000 ---32-----------16|15------------0- - | : | \ - | : | | - SDRAM | : | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE - | : | | = 0x01000000 - | : | / - 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE - | | - : gap : - : : - -- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x00920a80 ---32-----------16|15------------0- - | | | \ - : (real size : : | - IDE i/f : and content : : > 0x00000080 - [5] : unknown) : : | - | | | / - 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER1 | (unused) | | - [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | (unused) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (1 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO7 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO6 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (wo) | / - 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6 - | edgecapture (1 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO5 | interruptmask (1 bit) (rw) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (ro) | / - 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO4 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (1 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (1 bit) (rw) | / - 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO3 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (16 bit) (wo) | / - 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO2 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (8 bit) (wo) | / - 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO1 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (11 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (11 bit) (rw) | / - 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1 - | edgecapture (4 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO0 | interruptmask (4 bit) (rw) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (4 bit) (ro) | / - 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | snaph (16 bit) (rw) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER0 | snapl (16 bit) (rw) | | - [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | periodh (16 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | periodl (16 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (4 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0 - | | \ - : gap : > (space for UART1) - | | / - 0x00920920 ---32-----------16|15------------0- - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART0 | (unused) | > 0x00000020 - [2] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0 - -- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - - - - 0x00920900 ----------------------------------- - | | \ - : (real size : | - OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE - : unknown) : | = 0x00000100 - | | / - 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE - -- - - - - - - - - - - on chip memory 2 - - - - - - - - - - - - - 0x00920800 ---32-----------16|15------------0- - | : | \ - | : | | - GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE - | : | | = 0x00000800 - | : | / - 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT - 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE - -- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - - - - 0x00920000 ---32-----------16|15------------0- - | gap | \ - 0x00910310 --+-------------------------------| | - | | | - | register bank (size = 0x10) | | - | +--------.---.---.--- | | - | | bank 0 \ 1 \ 2 \ 3 \ | | - | |---------------------------+ | | - LAN91C111 | | BANK | RESERVED | | | - | |- - - - - - -|- - - - - - -| | > na_lan91c111_size - | | RPCR | MIR | | | = 0x00010000 - | |- - - - - - -|- - - - - - -| | | - | | COUNTER | RCR | | | - | |- - - - - - -|- - - - - - -| | | - | | EPH STATUS | TCR | | | - | +---------------------------+ | | - 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| | - | gap | / - 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE - -- - - - - - - - - - - on chip memory 1 - - - - - - - - - - - - - 0x00910000 ---32-----------16|15------------0- - | : | \ - | : | | - onchip RAM | : | > CONFIG_SYS_NIOS_CPU_RAM_SIZE - | : | | = 0x00010000 - | : | / - 0x00900000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_RAM_BASE - -- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - - - - 0x00900000 ---32-----------16|15------------0- - 0x00900000 --+32-----------16|15------------0+ - | . | \ \ - | . | | | - | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE - | . | | | = 0x00000100 - | . | | / - 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE - 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK - | . | | \ - | . | | | - | . | | > stack area - | . | | | - | . | | V - | . | | - SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE - | . | | = 0x00100000 - | | / - 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE - 0x00800000 ---8-------------4|3-------------0- - | sector 127 | \ - + 0x7f0000 |- - - - - - - - - - - - - - - -| | - | : | | - Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE - | sector 1 : | | = 0x00800000 - + 0x010000 |- - - - - - - - - - - - - - - -| | - | sector 0 (size = 0x10000) | / - 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE - - -=============================================================================== - F L A S H M E M O R Y A L L O C A T I O N -=============================================================================== - - 0x00800000 ---8-------------4|3-------------0- - | : | \ - | : | | - SAFE | : | > 2 MByte - FPGA conf. | : | | (NOT usable by software) - | : | / - 0x00600000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - USER | : | > 2 MByte - FPGA conf. | : | | (NOT usable by software) - | : | / - 0x00400000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - WEB pages | : | > 2 MByte - | : | | (provisory usable) - | : | / - 0x00200000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - | : | > 2 MByte free for use - 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start() - | : | / - 0x00000000 ---8-------------4|3-------------0- - - -=============================================================================== - R E F E R E N C E S -=============================================================================== -[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s40.pdf -[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf -[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf -[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf -[5] http://www.opencores.org/projects/ata/ - http://www.t13.org/index.html - - -=============================================================================== -Stephan Linz <linz@li-pro.net> diff --git a/doc/README.dk20k200_std32 b/doc/README.dk20k200_std32 deleted file mode 100644 index fc2d2a3..0000000 --- a/doc/README.dk20k200_std32 +++ /dev/null @@ -1,242 +0,0 @@ - -=============================================================================== - C P U , M E M O R Y , I N / O U T C O M P O N E N T S -=============================================================================== -see also [1]-[4] - -CPU: "standard_32" - 32 bit NIOS for 33.333 MHz (nasys_clock_freq = 33333000) - 256 Byte for register file (15 levels) - no instruction cache - no data cache - 1 KByte On Chip ROM with GERMS boot monitor - no On Chip RAM - MSTEP multiplier - no Debug Core - no On Chip Instrumentation (OCI) enabled - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000 - CONFIG_SYS_NIOS_CPU_ICACHE = 0 - CONFIG_SYS_NIOS_CPU_DCACHE = 0 - CONFIG_SYS_NIOS_CPU_REG_NUMS = 256 - CONFIG_SYS_NIOS_CPU_MUL = 0 - CONFIG_SYS_NIOS_CPU_MSTEP = 1 - CONFIG_SYS_NIOS_CPU_DBG_CORE = 0 - -IRQ: Nr. | used by - ------+-------------------------------------------------------- - 25 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 25 - 26 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 26 - 27 | PIO2 | CONFIG_SYS_NIOS_CPU_PIO2_IRQ = 27 - 28 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 28 (debug) - -MEMORY: 1 MByte Flash - 256 KByte SRAM - (SDRAM with standard SODIMM only) - -Timer: TIMER0: high priority programmable timer (IRQ25) - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0 - -PIO: Nr. | description - ------+-------------------------------------------------------- - PIO0 | SEVENSEG: 16 outputs for user seven segment display - PIO1 | LED: 8 outputs for user LEDs - PIO2 | BUTTON: 4 inputs for user push buttons (IRQ27) - PIO3 | LCD: 11 in/outputs for ASCII LCD - - U-Boot CFG: CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 0 - CONFIG_SYS_NIOS_CPU_LED_PIO = 1 - CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 2 - CONFIG_SYS_NIOS_CPU_LCD_PIO = 3 - -UART: UART0: fixed baudrate of 115200, fixed protocol 8N2, - without handshake RTS/CTS (IRQ26) - UART1: fixed baudrate of 115200, fixed protocol 8N1, - without handshake RTS/CTS (IRQ28) - - -=============================================================================== - M E M O R Y M A P -=============================================================================== - -- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - - - - 0x00200000 ---15------------8|7-------------0- - | sector 18 | \ - + 0x0f0000 |- - - - - - - - - - - - - - - -| | - | : | | - Flash |- - - - : - - - -| | - | sector 5 : | | - + 0x020000 |- - - - - - - - -| | - | sector 4 (size = 0x10000) | | - + 0x010000 |- - - - - - - - - - - - - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE - | sector 3 (size = 0x08000) | | = 0x00100000 - + 0x008000 |- - - - - - - - - - - - - - - -| | - | sector 2 (size = 0x02000) | | - + 0x006000 |- - - - - - - - - - - - - - - -| | - | sector 1 (size = 0x02000) | | - + 0x004000 |- - - - - - - - - - - - - - - -| | - | sector 0 (size = 0x04000) | / - 0x00100000 ---15------------8|7-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE - | | - : gap : - | | - 0x00080000 ---32-----------16|15------------0- - 0x00080000 --+32-----------16|15------------0+ - | . | \ \ - | . | | | - | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE - | . | | | = 0x00000100 - | . | | / - 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE - 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK - | . | | \ - | . | | | - | . | | > stack area - | . | | | - | . | | V - | . | | - SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE - | . | | = 0x00040000 - | | / - 0x00040000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE - | | - : gap : - : : - -- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - - - - : : - : gap : - | | - 0x00000400 ---32-----------16|15------------0- - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART1 | (unused) | > 0x00000020 - [2] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x000004c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1 - | | - : gap : - | | - 0x00000490 ---32-----------16|15------------0- - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO3 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (11 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (11 bit) (rw) | / - 0x00000480 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3 - | edgecapture (12 bit) (rw) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO2 | interruptmask (12 bit) (rw) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (12 bit) (ro) | / - 0x00000470 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO1 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | direction (2 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (2 bit) (rw) | / - 0x00000460 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | snaph (16 bit) (rw) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - TIMER0 | snapl (16 bit) (rw) | | - [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020 - | periodh (16 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | periodl (16 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | control (4 bit) (rw) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | status (2 bit) (rw) | / - 0x00000440 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0 - | (unused) | \ - + 0x0c |- - - - - - - - - - - - - - - -| | - PIO0 | (unused) | | - [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010 - | (unused) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | data (16 bit) (wo) | / - 0x00000420 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0 - | (unused) | \ - + 0x1c |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x18 |- - - - - - - - - - - - - - - -| | - | (unused) | | - + 0x14 |- - - - - - - - - - - - - - - -| | - UART0 | (unused) | > 0x00000020 - [2] + 0x10 |- - - - - - - - - - - - - - - -| | - | control (10 bit) (rw) | | - + 0x0c |- - - - - - - - - - - - - - - -| | - | status (10 bit) (rw) | | - + 0x08 |- - - - - - - - - - - - - - - -| | - | txdata (8 bit) (wo) | | - + 0x04 |- - - - - - - - - - - - - - - -| | - | rxdata (8 bit) (ro) | / - 0x00000400 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0 - -- - - - - - - - - - - on chip memory - - - - - - - - - - - - - 0x00000400 ---32-----------16|15------------0- - | : | \ - | : | | - GERMS | : | > na_boot_monitor_rom_size - | : | | = 0x00000400 - | : | / - 0x00000000 |- - - - - - - - - - - - - - - -+- - nasys_reset_address - 0x00000000 ---32-----------16|15------------0- na_boot_monitor_rom - - -=============================================================================== - F L A S H M E M O R Y A L L O C A T I O N -=============================================================================== - - 0x00200000 ---15------------8|7-------------0- - | : | \ - SAFE | : | > 256 KByte - FPGA conf. | : | / (NOT usable by software) - 0x001c0000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - USER | : | > 256 KByte - FPGA conf. | : | / (NOT usable by software) - 0x00180000 --+- - - - - - - -:- - - - - - - -+- - | : | \ - | : | | - | : | > 512 KByte free for use - 0x00140000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start() - | : | / - 0x00100000 ---15------------8|7-------------0- - - -=============================================================================== - R E F E R E N C E S -=============================================================================== -[1] http://www.altera.com/literature/ds/ds_nios_board_apex_20k200e.pdf -[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf -[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf -[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf - - -=============================================================================== -Stephan Linz <linz@li-pro.net> diff --git a/doc/README.nios b/doc/README.nios deleted file mode 100644 index 5628144..0000000 --- a/doc/README.nios +++ /dev/null @@ -1,366 +0,0 @@ - - U-Boot for Nios-32 - - Last Update: February 1, 2004 -==================================================================== - -This file contains information regarding U-Boot and the Altera -Nios CPU. For information regarding U-Boot and the Nios Development -Kits see: - - * Cyclone Edition (DK-1C20), see doc/README.dk1c20 - * Stratix Edition (DK-1S10), see doc/README.dk1s10 (TODO) - * Stratix Edition (DK-1S40), see doc/README.dk1s40 (TODO) - * Stratix Edition (DK-20K200), see doc/README.dk20k200 (TODO) - -For informations regarding Nios Development Kit hardware overview -and the NIOS CPU standard configuration of all known boards made by -Altera see: - - * Development Kit (DK) hardware overview, see doc/README.nios_DK - * NIOS CPU standard_32 at DK-1C20, see doc/README.dk1c20_std32 - * NIOS CPU standard_32 at DK-1S10, see doc/README.dk1s10_std32 - * NIOS CPU standard_32 at DK-1S40, see doc/README.dk1s40_std32 - * NIOS CPU standard_32 at DK-20K200, see doc/README.dk20k200_std32 - -For those interested in contributing ... see HELP WANTED below. - - -1. OVERVIEW ------------- - -U-Boot has been successfully tested on the Nios Cyclone development -board using both the 'safe' and 'standard 32' configurations with -Nios CPU revision 3.1 (CPU_ID = 0x3018). U-Boot can be used with -or without the GERMS monitor. The initial version of U-Boot for the -Cyclone development kit is about 60 Kbyte and will fit in a single -sector of on-board FLASH. Only the Nios 32-bit CPU is supported. - -1.1 GERMS Monitor ------------------- -If GERMS is just not enough, then U-Boot is a great antibiotic. -You will be very pleased with its high degree of configurability -and its rich feature set. - -A few of the most obvious limitations of GERMS are overcome by -using U-Boot (See 'Brain Damage'). Most notably, you can use -minicom or Hyperterminal (duh). - -1.2 Altera Source Code ------------------------ -The Nios port does NOT include ANY sources that Altera has the -copyright. This was a conscious decision ... not an accident. -The Altera license is not clear in terms of distributing Altera -sources (when altera silicon is not involved). This isn't really -a problem as little, if any, of the Altera source contains -features that are not already available in U-Boot. - -1.3 Debugging via OCI ---------------------- -The Nios port supports debugging with gdb and/or nios-console -via the JTAG port. Stubs for debugging with gdb via the serial -port are not currently implemented. - - -2. CONFIGURATION OPTIONS/SETTINGS ----------------------------------- - -2.1 Nios-specific Options/Settings ------------------------------------ -All configuration options/settings that are specific to Nios begin -with "CONFIG_NIOS_", "CONFIG_SYS_NIOS_", or "CONFIG_SYS_NIOS_CPU_". - -The configuration follows a two-stage process. In the first stage -the NIOS CPU core will defined like defined in Alteras SOPC Builder. -At this point we use the "CONFIG_SYS_NIOS_CPU_" defines exclusively. For -more informations about all the definitions you have to setup see -into current board configurations and doc/README.nios_CFG_NIOS_CPU. - -In second stage we bring the NIOS CPU configuration in relation to -U-Boot configuration options/settings. The following is a list of -currently defined Nios-specific options/parameters used inside of -U-Boot. If any options are related to Standard-32 Nios SDK -excalibur.h definitions, the related definition follows the -description). - -CONFIG_NIOS -- defined for all Nios-32 boards. - -CONFIG_SYS_NIOS_CONSOLE -- the base address of the console UART or the JTAG - stdio port. To enable a console via JTAG, define - CONFIG_CONSOLE_JTAG and set CGF_NIOS_CONSOLE to the base address - of the JTAG stdio port (normally OCI base + 0x00fa). Then - run nios-console with the -w option. - (standard-32: nasys_uart_0 resp. na_uart1_base). - -CONFIG_SYS_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud - parameter is set to '1'. - -CONFIG_SYS_NIOS_MULT_HW -- use full hardware multiply (not yet implemented). - -CONFIG_SYS_NIOS_MULT_MSTEP -- use hardware assisted multiply using the - MSTEP instruction (not yet implemented). - -CONFIG_SYS_NIOS_TMRBASE -- the base address of the timer used to support - xxx_timer routines (e.g. set_timer(), get_timer(), etc.). - (standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base). - -CONFIG_SYS_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to - the timer. (standard-32: nasys_timer_1_irq resp. - na_low_priority_timer2_irq). - -CONFIG_SYS_NIOS_TMRMS -- the period of the timer in milliseconds. - -CONFIG_SYS_NIOS_TMRCNT -- the preloadable counter value for the timer if it has - no fixed period. - -CONFIG_SYS_NIOS_ASMIBASE -- the base address of the ASMI peripheral. - (standard-32: na_asmi_base). - -CONFIG_SYS_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral. - (nasys_spi_0) - -CONFIG_SYS_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF. - This value can be 8 or 16 only! (PTF: databits) - - -2.2 Differences in U-Boot Options/Settings -------------------------------------------- -Some 'standard' U-Boot options/settings are treated differently in -the Nios port. These are described below. - -CONFIG_SYS_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the - global data structure in the Nios memory space. More simply, - the address of global data. - - -3. ASSEMBLY CODING -------------------- - -In browsing the assembly source files, you may notice the absence -of the 'magic macros' (e.g. MOVIA, MOVIP, ADDIP etc.). This is -deliberate. The documentation for the magic macros is scant and -it is hard to find ... it does not appear in the Nios programmer's -manual, nor does it appear in the assembler manual. Regardless, -the macros actually do very little to improve readability anyway. - -With this in mind, all assembler modules use only instructions that -appear in the Nios programmer's manual OR are directly supported -by the nios-elf toolchain. For example, the 'dec %rB' instruction -is an alias for 'subi %rB,1' that is supported by the assembler -but does not appear in the programmer's manual. - - -4. BOOT PROCESS ---------------- - -4.1 Boot process over GERMS ---------------------------- -When the NIOS CPU catch a reset signal it will begin to be running -code from CONFIG_SYS_NIOS_CPU_RST_VECT. Normally at this place it will -find the GERMS monitor. That's the case for the generic NIOS CPU -configuration "standard_32". When the GERMS monitor starts running, -it performs important system initializations and then looks for -executable code in flash, using the following steps: - - 1. Examining the two bytes at CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x04000C. - 2. Examining the button 0 on the PIO CONFIG_SYS_NIOS_CPU_BUTTON_PIO. - 3. If the button is not pressed and the two bytes contain 'N' - and 'i', the monitor executes a CALL to location - CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x040000. - 4. If the code is not executed in step 3 or the code returns, - then prints an 8-digit version number to STDOUT and waits for - user commands from STDIN. - -In normal case, for "standard_32", STDIN and STDOUT are the first -serial port. - -4.2 Return to GERMS command line --------------------------------- -During the boot process, the GERMS monitor checks for the existence -of application software in flash memory. If found, the processor -immediately executes the code. To return program execution to the -GERMS monitor (that is, avoid running code stored in flash memory): - - 1. Hold down CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0. - 2. Press then release the CPU reset button. - 3. Release CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0. - - -5. DEBUGGING WITH GDB ---------------------- - -Debug sessions using gdb are currently supported only via JTAG. The -stubs for debugging via a serial port are not implemented. To enable -the gdb JTAG stubs, simply reference _brkpt_hw_int and _brkpt_sw_int -at vector table offsets 3 and 4, respectively. For an example, see -board/altera/dk1c20/vectors.S. - -5.1 Vector Table Initialization and ROM Stubs ---------------------------------------------- -If CONFIG_ROM_STUBS is defined, the debug breakpoint and single step -entries in the vector table are restored to their initial values -immediately _after_ initializing the vector table. Defining this macro -is useful when ROM-based stubs are implemented. - -NOTE: The default GERMS monitor does NOT implement gdb stubs, nor does -it initialize the vector table. Therefore, when debugging U-Boot, you -should NOT set a software breakpoint prior to vector table initialization. - -5.2 Starting a Debug Session ----------------------------- -If you're not familiar with gdb, you follow these step-by-step instructions. -These instructions are NOT the only way to start a debug session, but they -cover most of the individual functions to get you started. - - 1. Start the JTAG gdb server. Open a Nios shell window and start - the server. When the server is started you must provide the base - address of the OCI core. For example, when using the Cyclone - development kit (DK1C20): - - $ nios-gdb-server --ocibase=0x00920800 --tcpport=2342 - - 2. Start gdb. Open a Nios shell window, change to the top-level - U-Boot directory and start gdb, specifying the u-boot elf file: - - $ nios-elf-gdb u-boot - - 3. Update target settings. From the file menu, select - "Target Settings ..." and select the following, then click 'Ok': - - Target: Remote/TCP - Port : 2342 (same as in step 1) - Display download dialog: checked - All other check boxes: unchecked - - 4. Connect to the target. Select menu: 'Run->Connect to target'. - You should see a dialog box indicating the you successfully connected - to the target. - - 5. Download U-Boot. Select menu: 'Run->Download'. - - 6. Open a gdb console window and set the source directory paths. - Select menu: 'View->Console'. In the console window, enter the - following commands, then close the console window: - - (gdb) directory common - (gdb) directory arch/nios/cpu - (gdb) directory arch/nios/lib - (gdb) directory board/altera/dk1c20 - - Note that the last command is for the DK1C20 board only. If you - are using another board, specify that board's directory. - - 7. Open the file board.c (using the file menu in the lower - left hand corner). Scroll to the board_init() routine and set - a breakpoint. - - 8. Run U-Boot. Just click on the run icon, or select menu: - 'Run->Run'. U-Boot should start running, then break at your - breakpoint. - - 9. Have fun & start learning more about gdb. - - -5.3 For advanced Users ----------------------- -A few notes for those more familiar with gdb. - - -Serial port stubs are not implemented. Sorry, but it's just not - worth _my_ effort. The JTAG stubs work great and are ridiculously - simple to implement. - - -If you need to debug the early startup code (prior to the vector - table initialization), use the nios-console debugger. - - - Connect, download & run -- there are some problems here. Connect - download and run seperately to avoid trouble. - -6. BRAIN DAMAGE ----------------- - -This section describes some of the unfortunate and avoidable aspects -of working with the Nios CPU ... and some things you can do to -reduce your pain. - -6.1 GERMS doesn't work with Hyperterminal ------------------------------------------- -GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal -(or minicom) -- geez. Regardless of you opion of Hyperterminal, this -sad design decision is remedied by using U-Boot. - -6.2 cygwin Incompatibility ---------------------------- -The version of cygwin distributed with the nios GNUPro toolchain is -out-of-date and incompatible with the latest cygwin distributions. -In addition, many of the standard utilities are very dated as well. -If you try to download and build the lastest version of grep for -example, you'll quickly realize that a native gcc is not available -(the next topic) which leads to U-Boot build problems (following -topic). - -The solution ... well, you can wait for Altera ... or build as -set of tools for linux. - -6.3 No native gcc ------------------- -I'm not sure how this one slipped through the cracks ... but it is -a real pain. Basically, if you want to build anything for the native -environment -- forget it! A native (cygwin) gcc is not distributed, -and the old version of cygwin makes locating one challenging. - -The solution ... same as above. Just download the gcc source from -Altera and build up a set of cross tools for your favorite linux -distro. Anybody who wants to use an already precompiled NIOS cross -toolchain can it found in the CDK4NIOS project hosted by Source -Forge at http://cdk4nios.sourceforge.net. - -6.4 Can't build default U-Boot -------------------------------- -By default, when you build U-Boot you will be building some native -tools along with the target elf, bin, and srec files. Without a -native gcc, this (obviously) causes problems. - -For developers using the Altera cygwin tools you can remove the -'tools' directory from SUBDIRS in the top-level Makefile. You will -also have to edit common/Makefile: - -Replace: -env_embedded.o: env_embedded.c ../tools/envcrc - $(CC) $(AFLAGS) -Wa,--no-warn \ - -DENV_CRC=$(shell ../tools/envcrc) \ - -c -o $@ env_embedded.c - -With: -env_embedded.o: env_embedded.c - $(CC) $(AFLAGS) -Wa,--no-warn \ - -DENV_CRC=0 \ - -c -o $@ env_embedded.c - -BTW, thats a 'zero' ... not the letter 'O'. And not that the -"../tools/envcrc" dependency is removed. - - -7. HELP WANTED ---------------- - -There are plenty of areas where help is needed. Here's are some ideas -for those interested in contributing: - --CompactFlash. Port & test CF/FAT. - --Bedbug. Develop bedbug for Nios ... or at least provide a disassemble - command. - --Add boot support for ucLinux (niosnommu). - --Implement (don't copy Altera code) the __mulxx routines using the - MSTEP and MUL instructions (e.g. CONFIG_SYS_NIOS_MULT_HW and CONFIG_SYS_NIOS_MULT_MSTEP). - - -Regards, - ---Scott -<smcnutt@psyent.com> - ---Stephan -<linz@li-pro.net> diff --git a/doc/README.nios_CONFIG_SYS_NIOS_CPU b/doc/README.nios_CONFIG_SYS_NIOS_CPU deleted file mode 100644 index 3547c34..0000000 --- a/doc/README.nios_CONFIG_SYS_NIOS_CPU +++ /dev/null @@ -1,140 +0,0 @@ - -=============================================================================== - C F G _ N I O S _ C P U _ * v s . N I O S S D K -=============================================================================== - -When ever you have to make a new NIOS CPU configuration you can use this table -as a reference list to the original NIOS SDK symbols made by Alteras SOPC -Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc. -Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description -(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO. - -C O R E N I O S S D K [1],[7] -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_CLK nasys_clock_freq -CONFIG_SYS_NIOS_CPU_ICACHE nasys_icache_size -CONFIG_SYS_NIOS_CPU_DCACHE nasys_dcache_size -CONFIG_SYS_NIOS_CPU_REG_NUMS nasys_nios_num_regs -CONFIG_SYS_NIOS_CPU_MUL __nios_use_multiply__ -CONFIG_SYS_NIOS_CPU_MSTEP __nios_use_mstep__ -CONFIG_SYS_NIOS_CPU_STACK nasys_stack_top -CONFIG_SYS_NIOS_CPU_VEC_BASE nasys_vector_table -CONFIG_SYS_NIOS_CPU_VEC_SIZE nasys_vector_table_size -CONFIG_SYS_NIOS_CPU_VEC_NUMS -CONFIG_SYS_NIOS_CPU_RST_VECT nasys_reset_address -CONFIG_SYS_NIOS_CPU_DBG_CORE nasys_debug_core -CONFIG_SYS_NIOS_CPU_RAM_BASE na_onchip_ram_64_kbytes -CONFIG_SYS_NIOS_CPU_RAM_SIZE na_onchip_ram_64_kbytes_size -CONFIG_SYS_NIOS_CPU_ROM_BASE na_boot_monitor_rom -CONFIG_SYS_NIOS_CPU_ROM_SIZE na_boot_monitor_rom_size -CONFIG_SYS_NIOS_CPU_OCI_BASE nasys_oci_core -CONFIG_SYS_NIOS_CPU_OCI_SIZE -CONFIG_SYS_NIOS_CPU_SRAM_BASE na_ext_ram nasys_program_mem - nasys_data_mem -CONFIG_SYS_NIOS_CPU_SRAM_SIZE na_ext_ram_size nasys_program_mem_size - nasys_data_mem_size -CONFIG_SYS_NIOS_CPU_SDRAM_BASE na_sdram -CONFIG_SYS_NIOS_CPU_SDRAM_SIZE na_sdram_size -CONFIG_SYS_NIOS_CPU_FLASH_BASE na_ext_flash nasys_main_flash - nasys_am29lv065d_flash_0 - nasys_flash_0 -CONFIG_SYS_NIOS_CPU_FLASH_SIZE na_ext_flash_size nasys_main_flash_size - -T I M E R N I O S S D K [3] -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_TIMER_NUMS nasys_timer_count -CONFIG_SYS_NIOS_CPU_TIMER[0-9] nasys_timer_[0-9] -CONFIG_SYS_NIOS_CPU_TIMER[0-9]_IRQ nasys_timer_[0-9]_irq -CONFIG_SYS_NIOS_CPU_TIMER[0-9]_PER [ptf]:period - [ptf]:period_units - [ptf]:mult -CONFIG_SYS_NIOS_CPU_TIMER[0-9]_AR [ptf]:always_run -CONFIG_SYS_NIOS_CPU_TIMER[0-9]_FP [ptf]:fixed_period -CONFIG_SYS_NIOS_CPU_TIMER[0-9]_SS [ptf]:snapshot - -U A R T N I O S S D K [2] -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_UART_NUMS nasys_uart_count -CONFIG_SYS_NIOS_CPU_UART[0-9] nasys_uart_[0-9] -CONFIG_SYS_NIOS_CPU_UART[0-9]_IRQ nasys_uart_[0-9]_irq -CONFIG_SYS_NIOS_CPU_UART[0-9]_BR [ptf]:baud -CONFIG_SYS_NIOS_CPU_UART[0-9]_DB [ptf]:data_bits -CONFIG_SYS_NIOS_CPU_UART[0-9]_SB [ptf]:stop_bits -CONFIG_SYS_NIOS_CPU_UART[0-9]_PA [ptf]:parity -CONFIG_SYS_NIOS_CPU_UART[0-9]_HS [ptf]:use_cts_rts -CONFIG_SYS_NIOS_CPU_UART[0-9]_EOP [ptf]:use_eop_register - -P I O N I O S S D K [4] -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_PIO_NUMS nasys_pio_count -CONFIG_SYS_NIOS_CPU_PIO[0-9] nasys_pio_[0-9] -CONFIG_SYS_NIOS_CPU_PIO[0-9]_IRQ nasys_pio_[0-9]_irq -CONFIG_SYS_NIOS_CPU_PIO[0-9]_BITS [ptf]:Data_Width -CONFIG_SYS_NIOS_CPU_PIO[0-9]_TYPE [ptf]:has_tri - [ptf]:has_out - [ptf]:has_in -CONFIG_SYS_NIOS_CPU_PIO[0-9]_CAP [ptf]:capture -CONFIG_SYS_NIOS_CPU_PIO[0-9]_EDGE [ptf]:edge_type -CONFIG_SYS_NIOS_CPU_PIO[0-9]_ITYPE [ptf]:irq_type - -S P I N I O S S D K [6] -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_SPI_NUMS nasys_spi_count -CONFIG_SYS_NIOS_CPU_SPI[0-9] nasys_spi_[0-9] -CONFIG_SYS_NIOS_CPU_SPI[0-9]_IRQ nasys_spi_[0-9]_irq -CONFIG_SYS_NIOS_CPU_SPI[0-9]_BITS [ptf]:databits -CONFIG_SYS_NIOS_CPU_SPI[0-9]_MA [ptf]:ismaster -CONFIG_SYS_NIOS_CPU_SPI[0-9]_SLN [ptf]:numslaves -CONFIG_SYS_NIOS_CPU_SPI[0-9]_TCLK [ptf]:targetclock -CONFIG_SYS_NIOS_CPU_SPI[0-9]_TDELAY [ptf]:targetdelay -CONFIG_SYS_NIOS_CPU_SPI[0-9]_* [ptf]:* - -I D E N I O S S D K -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_IDE_NUMS nasys_usersocket_count -CONFIG_SYS_NIOS_CPU_IDE[0-9] nasys_usersocket_[0-9] - -A S M I N I O S S D K [5] -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_ASMI_NUMS nasys_asmi_count -CONFIG_SYS_NIOS_CPU_ASMI[0-9] nasys_asmi_[0-9] -CONFIG_SYS_NIOS_CPU_ASMI[0-9]_IRQ nasys_asmi_[0-9]_irq - -E t h e r n e t ( L A N ) N I O S S D K -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_LAN_NUMS -CONFIG_SYS_NIOS_CPU_LAN[0-9]_BASE na_lan91c111 -CONFIG_SYS_NIOS_CPU_LAN[0-9]_OFFS LAN91C111_REGISTERS_OFFSET -CONFIG_SYS_NIOS_CPU_LAN[0-9]_IRQ na_lan91c111_irq -CONFIG_SYS_NIOS_CPU_LAN[0-9]_BUSW LAN91C111_DATA_BUS_WIDTH -CONFIG_SYS_NIOS_CPU_LAN[0-9]_TYPE - -s y s t e m c o m p o s i n g N I O S S D K -------------------------------------------------------------------------------- -CONFIG_SYS_NIOS_CPU_TICK_TIMER (na_low_priority_timer2) -CONFIG_SYS_NIOS_CPU_USER_TIMER (na_timer1) -CONFIG_SYS_NIOS_CPU_BUTTON_PIO (na_button_pio) -CONFIG_SYS_NIOS_CPU_LCD_PIO (na_lcd_pio) -CONFIG_SYS_NIOS_CPU_LED_PIO (na_led_pio) -CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO (na_seven_seg_pio) -CONFIG_SYS_NIOS_CPU_RECONF_PIO (na_reconfig_request_pio) -CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO (na_cf_present_pio) -CONFIG_SYS_NIOS_CPU_CFPOWER_PIO (na_cf_power_pio) -CONFIG_SYS_NIOS_CPU_CFATASEL_PIO (na_cf_ata_select_pio) -CONFIG_SYS_NIOS_CPU_USER_SPI (na_spi) - - -=============================================================================== - R E F E R E N C E S -=============================================================================== -[1] http://www.altera.com/literature/ds/ds_nioscpu.pdf -[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf -[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf -[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf -[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf -[6] http://www.altera.com/literature/ds/ds_nios_spi.pdf -[7] http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf - - -=============================================================================== -Stephan Linz <linz@li-pro.net> diff --git a/doc/README.nios_DK b/doc/README.nios_DK deleted file mode 100644 index b119d76..0000000 --- a/doc/README.nios_DK +++ /dev/null @@ -1,192 +0,0 @@ - -=============================================================================== - H A R D W A R E O V E R V I E W -=============================================================================== -===============|===============|===============|===============|=============== - | DK20K200 | DK1C20 | DK1S10 | DK1S40 ----------------|---------------|---------------|---------------|--------------- - | | | | - Schem. Nr. | Nios Dev.Brd. | P06-08713-00 | P06-08468-01 | P06-09178-00 - Rev. | pilot. | 01 | 01 | 00 - Date | 2001/02/06 | 2003/02/20 | 2003/02/14 | 2003/05/14 -[1] | | | | -===============|===============|===============|===============|=============== - | | | | - FPGA | "APEX" | "Cyclon" | "Stratix" | "Stratix" - | EP20K200E | EP1C20 | EP1S10 | EP1S40 - | | | - | (484 FBGA) | (400 FBGA) | (780 FBGA) -[2],[3],[4] | | | ----------------|---------------|---------------|---------------|--------------- - | | - Clock (OSC) | 33.333 MHz | 50 MHz - | | (with ext. supply) - | - | PI49FCT3805 -[5] | ----------------|---------------|---------------|---------------|--------------- - | | - Flash | 1 MByte | 8 MByte - | | - | AM29LV800BB | AM29LV065DU120REI - | 8/16 bit bus | 8 bit bus - | 1 chip | 1 chip -[6],[7] | | ----------------|---------------|---------------|---------------|--------------- - | | | - serial | no such | 4 MBits | no such - Flash | | | - | | EPCS4SI8 | -[8] | | | ----------------|---------------|---------------|---------------|--------------- - | | - Compact | no such, as | see below: prototype adapter - Flash (CF) | module only | - | | ----------------|---------------|---------------|---------------|--------------- - | | - SRAM | 256 KByte | 1 MByte - | | - | IDT71V016S | IDT71V416S10PH - | 32 bit bus | 32 bit bus - | 2 chips | 2 chips - | interlaced | interlaced -[9],[10] | | ----------------|---------------|---------------|---------------|--------------- - | | - SDRAM | SODIMM only | 16 MByte - | | - | | MT48LC4M32B2TG-7 - | 64 bit bus | 32 bit bus - | | 1 chip -[11] | | -===============|===============|===============|===============|=============== - | | - serial I/O | 1 RS232 | 2 RS232 - | | - | LTC1386 | MAX3237CAI - | | - | port 1: | port 1: - | RxD / TxD, | RxD / TxD, - | RTS / CTS | RTS / CTS, DTR / DSR, DCD, RI - | | - | ! ! ! ! ! ! | port 2: | port 2: - | RTS/CTS can | RxD / TxD | RxD / TxD - | be RxD/TxD | | RTS / CTS, DTR / DSR - | of 2nd port | | DCD, RI -[12],[13] | ! ! ! ! ! ! | | ----------------|---------------|---------------|---------------|--------------- - | | - Ethernet | no such, as | 1 10BaseT / 100BaseT - | module only | - | | LAN91C111-NE - | | 32 bit bus - | | no external EEPROM - | | LEDA# for link - | | LEDB# for Rx / Tx -[14] | | -===============|===============|===============|===============|=============== - | | - user | 8 | no such - switches | SW[7..0] | - | | ----------------|---------------|---------------|---------------|--------------- - | - user push | 4 - buttons | PB[3..0] - | ----------------|---------------|---------------|---------------|--------------- - | | - user LEDs | 2 | 8 - | LED[1..0] | LED[7..0] - | | ----------------|---------------|---------------|---------------|--------------- - | - user seven | 2 - segment | HEX[1..0][G..A,DP] - | -===============|===============|===============|===============|=============== - | | - 3.3V proto- | w/o level | no such -- only 5V - type adapter | shift buffer | - | | - | 40 I/O pins | - | 1 card sel. | - | 1 reset out. | - | 1 OSC clock | - | 1 CPU clock | - | 1 clock out. | - | | ----------------|---------------|---------------|---------------|--------------- - | | - 5V prototype | with level | 2 ports -- both card ports supplied with its - adapter | shift buffer | own level shift buffer - | | - | 40 I/O pins | port 1 & 2: - | 1 card sel. | 41 I/O pins - | 1 Vee ? ? ? | 1 card select - | 1 reset out. | 1 reset output (from dev/board) - | 1 OSC clock | 1 OSC clock (from dev/board) - | 1 CPU clock | 1 CPU clock (from dev/board) - | 1 clock inp. | 1 clock input (to dev/board) - | | - | | (special) port 1: - | | 1 CF select - | | 1 CF present - | | 1 CF ATA select - | | 1 CF power - | | - | | NOTE: Both card ports are prepared for raw - | | IDE working. You can connect such - | | devices directly to the 40 pin header. - | | The signal PDIAG (passed diagnostic) - | | is not connected to any I/O signal. - | | Card port 1 is hard wired to the on - | | board Copact Flash adapter together - | | with all other signals needed by CF - | | cards. Hot plug should be working too. -[15],[16] | | -===============|===============|===============|===============|=============== - | | - config. CPLD | EPM7064 | EPM7128 - | | - (alternative | decition by | decision by - FPGA conf.) | jumper | push button - | | - | FPGA config. | FPGA config. | FPGA config. - | from Flash | from Flash | from Flash - | only | and EPCS4 | only - | | | -===============|===============|===============|===============|=============== -=============================================================================== - - -=============================================================================== - R E F E R E N C E S -=============================================================================== -[1] http://www.altera.com/literature/lit-nio.jsp -[2] http://www.altera.com/literature/lit-apx.jsp -[3] http://www.altera.com/literature/lit-cyc.jsp -[4] http://www.altera.com/literature/lit-stx.jsp -[5] http://www.pericom.com/pdf/datasheets/PI49FCT3805.pdf - http://www.pericom.com/products/clock/psempart.php?productID=PI49FCT3805 -[6] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1532,00.html - http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/21490.pdf -[7] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1596,00.html - http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23544b.pdf -[8] http://www.altera.com/literature/lit-config.html - http://preview.altera.com/literature/ds/micron.pdf -[9] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V016SA.html -[10] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V416SL.html -[11] http://www.micron.com/products/dram/sdram/part.aspx?part=MT48LC4M32B2TG-7 -[12] http://www.linear.com/prod/datasheet.html?datasheet=33 - http://www.linear.com/pdf/1386fa.pdf -[13] http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1068/ln/en - http://pdfserv.maxim-ic.com/en/ds/MAX3222-MAX3241.pdf -[14] http://www.smsc.com/main/catalog/lan91c111.html -[15] http://www.t13.org/index.html -[16] http://www.compactflash.org/faqs/faq.htm - - -=============================================================================== -Stephan Linz <linz@li-pro.net> diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index 157936e..6d20707 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -173,8 +173,7 @@ the '/images' node should have the following layout: - arch : Architecture name, mandatory for types: "standalone", "kernel", "firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha", "arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc", - "sparc64", "m68k", "nios", "microblaze", "nios2", "blackfin", "avr32", - "st200". + "sparc64", "m68k", "microblaze", "nios2", "blackfin", "avr32", "st200". - entry : entry point address, address size is determined by '#address-cells' property of the root node. Mandatory for for types: "standalone" and "kernel". |