diff options
author | Stefano Babic <sbabic@denx.de> | 2010-08-20 12:05:03 +0200 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2010-09-30 14:42:14 +0200 |
commit | 2f721d17339ee22bbc14fb0bb1dad20b82871923 (patch) | |
tree | 9dba3e401d9f16e48d6a9b832a00b53cb2f0111c /drivers | |
parent | 9f481e95baaca2a5a739f930c16b1cc485b0c1f3 (diff) | |
download | bootable_bootloader_goldelico_gta04-2f721d17339ee22bbc14fb0bb1dad20b82871923.zip bootable_bootloader_goldelico_gta04-2f721d17339ee22bbc14fb0bb1dad20b82871923.tar.gz bootable_bootloader_goldelico_gta04-2f721d17339ee22bbc14fb0bb1dad20b82871923.tar.bz2 |
MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
The actual SPI driver for i.MX31 and i.MX51 controller
use a wrong byte ordering, because it is supposed
to work only with Freescale's devices, as the Power
Controllers (PMIC). The driver is not suitable for
general purposes, because the buffers passed to spi_xfer
must be 32-bit aligned, as it is used mainly to send
integer to PMIC devices.
The patch drops any kind of limitation and makes the
driver useful with devices controlled sending commands
composed by single bytes (or by a odd number of bytes), such as
spi flash, sensor, etc.
Because the byte ordering is changed,
any current driver using this controller must be adapted, too.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/misc/fsl_pmic.c | 10 | ||||
-rw-r--r-- | drivers/spi/mxc_spi.c | 149 |
2 files changed, 118 insertions, 41 deletions
diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c index dca0a1d..5ee1de1 100644 --- a/drivers/misc/fsl_pmic.c +++ b/drivers/misc/fsl_pmic.c @@ -46,6 +46,7 @@ void pmic_spi_free(struct spi_slave *slave) u32 pmic_reg(u32 reg, u32 val, u32 write) { u32 pmic_tx, pmic_rx; + u32 tmp; if (!slave) { slave = pmic_spi_probe(); @@ -65,7 +66,9 @@ u32 pmic_reg(u32 reg, u32 val, u32 write) pmic_tx = (write << 31) | (reg << 25) | (val & 0x00FFFFFF); - if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx, + tmp = cpu_to_be32(pmic_tx); + + if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx, SPI_XFER_BEGIN | SPI_XFER_END)) { spi_release_bus(slave); return -1; @@ -73,7 +76,8 @@ u32 pmic_reg(u32 reg, u32 val, u32 write) if (write) { pmic_tx &= ~(1 << 31); - if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx, + tmp = cpu_to_be32(pmic_tx); + if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx, SPI_XFER_BEGIN | SPI_XFER_END)) { spi_release_bus(slave); return -1; @@ -81,7 +85,7 @@ u32 pmic_reg(u32 reg, u32 val, u32 write) } spi_release_bus(slave); - return pmic_rx; + return cpu_to_be32(pmic_rx); } void pmic_reg_write(u32 reg, u32 value) diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index c6c8f60..d558137 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -62,6 +62,7 @@ #define MXC_CSPICTRL_MAXBITS 0x1f #define MXC_CSPIPERIOD_32KHZ (1 << 15) +#define MAX_SPI_BYTES 4 static unsigned long spi_bases[] = { 0x43fa4000, @@ -95,6 +96,7 @@ static unsigned long spi_bases[] = { #define MXC_CSPICTRL_RXOVF (1 << 6) #define MXC_CSPIPERIOD_32KHZ (1 << 15) +#define MAX_SPI_BYTES 32 /* Bit position inside CTRL register to be associated with SS */ #define MXC_CSPICTRL_CHAN 18 @@ -252,13 +254,15 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs, } #endif -static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen, - unsigned long flags) +int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen, + const u8 *dout, u8 *din, unsigned long flags) { struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); + int nbytes = (bitlen + 7) / 8; + u32 data, cnt, i; - if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + debug("%s: bitlen %d dout 0x%x din 0x%x\n", + __func__, bitlen, (u32)dout, (u32)din); mxcs->ctrl_reg = (mxcs->ctrl_reg & ~MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) | @@ -273,8 +277,46 @@ static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen, reg_write(mxcs->base + MXC_CSPISTAT, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); - debug("Sending SPI 0x%x\n", data); - reg_write(mxcs->base + MXC_CSPITXDATA, data); + /* + * The SPI controller works only with words, + * check if less than a word is sent. + * Access to the FIFO is only 32 bit + */ + if (bitlen % 32) { + data = 0; + cnt = (bitlen % 32) / 8; + if (dout) { + for (i = 0; i < cnt; i++) { + data = (data << 8) | (*dout++ & 0xFF); + } + } + debug("Sending SPI 0x%x\n", data); + + reg_write(mxcs->base + MXC_CSPITXDATA, data); + nbytes -= cnt; + } + + data = 0; + + while (nbytes > 0) { + data = 0; + if (dout) { + /* Buffer is not 32-bit aligned */ + if ((unsigned long)dout & 0x03) { + data = 0; + for (i = 0; i < 4; i++, data <<= 8) { + data = (data << 8) | (*dout++ & 0xFF); + } + } else { + data = *(u32 *)dout; + data = cpu_to_be32(data); + } + dout += 4; + } + debug("Sending SPI 0x%x\n", data); + reg_write(mxcs->base + MXC_CSPITXDATA, data); + nbytes -= 4; + } /* FIFO is written, now starts the transfer setting the XCH bit */ reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | @@ -288,49 +330,78 @@ static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen, reg_write(mxcs->base + MXC_CSPISTAT, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); - data = reg_read(mxcs->base + MXC_CSPIRXDATA); - debug("SPI Rx: 0x%x\n", data); + nbytes = (bitlen + 7) / 8; - if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); + cnt = nbytes % 32; - return data; + if (bitlen % 32) { + data = reg_read(mxcs->base + MXC_CSPIRXDATA); + cnt = (bitlen % 32) / 8; + debug("SPI Rx unaligned: 0x%x\n", data); + if (din) { + for (i = 0; i < cnt; i++, data >>= 8) { + *din++ = data & 0xFF; + } + } + nbytes -= cnt; + } + + while (nbytes > 0) { + u32 tmp; + tmp = reg_read(mxcs->base + MXC_CSPIRXDATA); + data = cpu_to_be32(tmp); + debug("SPI Rx: 0x%x 0x%x\n", tmp, data); + cnt = min(nbytes, sizeof(data)); + if (din) { + memcpy(din, &data, cnt); + din += cnt; + } + nbytes -= cnt; + } + + return 0; } + int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { - int n_blks = (bitlen + 31) / 32; - u32 *out_l, *in_l; - int i; + int n_bytes = (bitlen + 7) / 8; + int n_bits; + int ret; + u32 blk_size; + u8 *p_outbuf = (u8 *)dout; + u8 *p_inbuf = (u8 *)din; - if ((int)dout & 3 || (int)din & 3) { - printf("Error: unaligned buffers in: %p, out: %p\n", din, dout); - return 1; - } + if (!slave) + return -1; - /* This driver is currently partly broken, alert the user */ - if (bitlen > 16 && (bitlen % 32)) { - printf("Error: SPI transfer with bitlen=%d is broken.\n", - bitlen); - return 1; + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + while (n_bytes > 0) { + + if (n_bytes < MAX_SPI_BYTES) + blk_size = n_bytes; + else + blk_size = MAX_SPI_BYTES; + + n_bits = blk_size * 8; + + ret = spi_xchg_single(slave, n_bits, p_outbuf, p_inbuf, 0); + + if (ret) + return ret; + if (dout) + p_outbuf += blk_size; + if (din) + p_inbuf += blk_size; + n_bytes -= blk_size; } - for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout; - i < n_blks; - i++, in_l++, out_l++, bitlen -= 32) { - u32 data = spi_xchg_single(slave, *out_l, bitlen, flags); - - /* Check if we're only transfering 8 or 16 bits */ - if (!i) { - if (bitlen < 9) - *(u8 *)din = data; - else if (bitlen < 17) - *(u16 *)din = data; - else - *in_l = data; - } + if (flags & SPI_XFER_END) { + spi_cs_deactivate(slave); } return 0; @@ -378,8 +449,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; mxcs = malloc(sizeof(struct mxc_spi_slave)); - if (!mxcs) + if (!mxcs) { + puts("mxc_spi: SPI Slave not allocated !\n"); return NULL; + } ret = decode_cs(mxcs, cs); if (ret < 0) { |