diff options
author | wdenk <wdenk> | 2003-06-03 23:54:09 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2003-06-03 23:54:09 +0000 |
commit | 682011ff6968198da14b89e40d9f55b00f6d91f7 (patch) | |
tree | 18793a72134a5262daf281ab0b904ab16f5337ac /include/configs/KUP4K.h | |
parent | 7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed (diff) | |
download | bootable_bootloader_goldelico_gta04-682011ff6968198da14b89e40d9f55b00f6d91f7.zip bootable_bootloader_goldelico_gta04-682011ff6968198da14b89e40d9f55b00f6d91f7.tar.gz bootable_bootloader_goldelico_gta04-682011ff6968198da14b89e40d9f55b00f6d91f7.tar.bz2 |
* Patches by Udi Finkelstein, 2 June 2003:
- Added support for custom keyboards, initialized by defining a
board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
- Added support for the RBC823 board.
- cpu/mpc8xx/lcd.c now automatically calculates the
Horizontal Pixel Count field.
* Fix alignment problem in BOOTP (dhcp_leasetime option)
[pointed out by Nicolas Lacressonnière, 2 Jun 2003]
* Patch by Mark Rakes, 14 May 2003:
add support for Intel e1000 gig cards.
* Patch by Nye Liu, 3 Jun 2003:
fix critical typo in MAMR definition (include/mpc8xx.h)
* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
* Patch by Klaus Heydeck, 2 Jun 2003
Minor changes for KUP4K configuration
Diffstat (limited to 'include/configs/KUP4K.h')
-rw-r--r-- | include/configs/KUP4K.h | 56 |
1 files changed, 30 insertions, 26 deletions
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index f68f1e1..b924b9c 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -41,39 +41,41 @@ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate */ +#define CONFIG_BAUDRATE 115200 /* console baudrate */ #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else -#define CONFIG_BOOTDELAY 5 /* autoboot after 1 second */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ #endif #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ #define CONFIG_BOARD_TYPES 1 /* support board types */ -#if 0 -#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" -#endif #undef CONFIG_BOOTARGS -#define CONFIG_NFSBOOTCOMMAND \ - "dhcp ;"\ - "setenv bootargs root=/dev/nfs ro nfsroot=$(nfsip):$(rootpath) "\ - "ip=$(ipaddr):$(nfsip):$(gatewayip):"\ - "$(netmask):heydeck.eva:eth0:off; "\ - "bootm 100000" -#define CONFIG_RAMBOOTCOMMAND \ - "diskboot 100000 0:1; "\ - "setenv bootargs root=/dev/hda2 panic=1 "\ - "ip=192.168.0.71:192.168.0.100:192.168.0.2:255.255.255.0; "\ - "bootm" +#define CONFIG_EXTRA_ENV_SETTINGS \ +"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off panic=1;\ + diskboot 200000 0:1; bootm 200000\0" \ +"slot_b_boot=setenv bootargs root=/dev/hda2 ip=off panic=1;\ + diskboot 200000 2:1; bootm 200000\0" \ +"nfs_boot=dhcp; run nfsargs addip; bootm 200000\0" \ +"panic_boot=echo No Bootdevice !!! reset\0" \ +"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsip):$(rootpath)\0" \ +"ramargs=setenv bootargs root=/dev/ram rw\0" \ +"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsip):$(gatewayip)\ +:$(netmask):$(hostname):$(netdev):off panic=1\0" \ +"netdev=eth0\0" \ +"load=tftp 200000 bootloader.bitmap;tftp 100000 u-boot.bin\0" \ +"update=protect off 1:0-8;era 1:0-8;cp.b 100000 40000000 $(filesize);\ +cp.b 200000 40040000 14000\0" \ +"nfsip=192.168.2.19\0" + +#define CONFIG_BOOTCOMMAND \ + "run slot_a_boot;run slot_b_boot;run nfs_boot;run panic_boot" -#define CONFIG_BOOTCOMMAND \ - "run ramboot "\ - "run nfsboot" #define CONFIG_MISC_INIT_R 1 @@ -124,12 +126,14 @@ #define CFG_MEMTEST_START 0x0400000 /* memtest works on */ #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_LOAD_ADDR 0x200000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_CONSOLE_INFO_QUIET 1 + /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) @@ -250,7 +254,7 @@ * * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! */ -#define CFG_PLPRCR ( (3-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) +#define CFG_PLPRCR ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register 15-27 @@ -259,7 +263,7 @@ * power management and some other internal clocks */ #define SCCR_MASK SCCR_EBDF00 -#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 | \ +#define CFG_SCCR (SCCR_TBS | SCCR_EBDF01 | \ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ SCCR_DFALCD00) @@ -271,7 +275,7 @@ */ /* KUP4K use both slots, SLOT_A as "primary". */ -#define CONFIG_PCMCIA_SLOT_A 1 +#define CONFIG_PCMCIA_SLOT_A 1 #define CFG_PCMCIA_MEM_ADDR (0xE0000000) #define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) @@ -428,12 +432,12 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if NOT_USED_FOR_NOW + #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #if 0 #define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n" #endif -#define CONFIG_AUTOBOOT_STOP_STR "2" /* easy to stop for now */ -#endif /* NOT_USED_FOR_NOW */ +#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */ + #endif /* __CONFIG_H */ |