diff options
author | wdenk <wdenk> | 2003-12-07 21:39:28 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2003-12-07 21:39:28 +0000 |
commit | b028f7151379c5bb6814099fbbccb31d8b07b891 (patch) | |
tree | 6b96f658b7b8f2f3ecd21b0e102b01aea1998d74 /include/configs/MPC86xADS.h | |
parent | b4676a25e2feb15826d960f4a216c3c429d2de75 (diff) | |
download | bootable_bootloader_goldelico_gta04-b028f7151379c5bb6814099fbbccb31d8b07b891.zip bootable_bootloader_goldelico_gta04-b028f7151379c5bb6814099fbbccb31d8b07b891.tar.gz bootable_bootloader_goldelico_gta04-b028f7151379c5bb6814099fbbccb31d8b07b891.tar.bz2 |
* Patch by Yuli Barcohen, 3 Dec 2003:
"revive" U-Boot support for old Motorola MPC860ADS board
* Patch by Cam(ilo?), 03 Dec 2003:
make examples build even with broken Montavista objcopy
* Patch by Pavel Bartusek, 27 Nov 2003:
fix conversion problem with "bootretry" evironment variable
Diffstat (limited to 'include/configs/MPC86xADS.h')
-rw-r--r-- | include/configs/MPC86xADS.h | 121 |
1 files changed, 50 insertions, 71 deletions
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h index fc79c52..1eac6ef 100644 --- a/include/configs/MPC86xADS.h +++ b/include/configs/MPC86xADS.h @@ -9,10 +9,10 @@ * 1999-nov-26: The FADS is using the following physical memorymap: * * ff020000 -> ff02ffff : pcmcia - * ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxrom + * ff010000 -> ff01ffff : BCSR connected to CS1 * ff000000 -> ff00ffff : IMAP internal in the cpu - * fe000000 -> ffnnnnnn : flash connected to CS0, setup by 8xxrom - * 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom + * fe000000 -> fennnnnn : flash connected to CS0 + * 00000000 -> nnnnnnnn : sdram connected to CS4 */ /* ------------------------------------------------------------------------- */ @@ -28,7 +28,6 @@ * High Level Configuration Options * (easy to change) */ -#include <mpc8xx_irq.h> /* board type */ #define CONFIG_MPC86xADS 1 /* new ADS */ @@ -66,9 +65,6 @@ /* in general, we always know this for FADS+new ADS anyway */ #define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ -/* most vanilla kernels do not like this, set to 0 if in doubt */ -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - #if 1 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else @@ -76,14 +72,12 @@ #endif #undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \ +#define CONFIG_BOOTCOMMAND \ + "dhcp;" \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ "bootm" -/* #include "local.h" */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* ATA / IDE and partition support */ @@ -96,21 +90,27 @@ #undef CONFIG_IDE_LED /* LED for ide not supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ -/* choose SCC1 ethernet (10BASET on motherboard) - * or FEC ethernet (10/100 on daughterboard) +/* + * New MPC86xADS provides two Ethernet connectivity options: + * 10Mbit/s on SCC1 and 100Mbit/s on FEC. All new PQ1 chips + * has got FEC so FEC is the default. */ -#if 0 -#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ -#undef CONFIG_FEC_ENET /* disable FEC ethernet */ -#else /* all 86x cores have FECs, if in doubt, use it */ #undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ #define CONFIG_FEC_ENET 1 /* use FEC ethernet */ +#ifdef CONFIG_FEC_ENET #define CFG_DISCOVER_PHY #endif #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured #endif +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_DHCP \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PING \ + ) + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -128,13 +128,6 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0100000 /* memtest works on */ -#if (CFG_SDRAM_SIZE) -#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */ -#else -#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ -#endif - #define CFG_LOAD_ADDR 0x00100000 #define CFG_HZ 1000 /* decr freq: 1 ms ticks */ @@ -167,23 +160,20 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#ifdef CONFIG_FADS -# ifdef CONFIG_MPC86xADS /* new ADS */ -# define CFG_SDRAM_SIZE 0x00800000 /* 8 meg */ -# else /* old/new FADS */ -# define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */ -# endif -#else /* !CONFIG_FADS */ /* old ADS */ -# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */ +#if defined(CONFIG_MPC86xADS) /* new ADS */ +#define CFG_SDRAM_SIZE 0x00800000 /* 8 meg */ +#elif defined(CONFIG_FADS) /* old/new FADS */ +#define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */ +#else /* old ADS */ +#define CFG_SDRAM_SIZE 0x00000000 /* No SDRAM */ #endif -#define CFG_FLASH_BASE 0x02800000 - -#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ - -#define CFG_MONITOR_LEN (272 << 10) /* Reserve 272 kB for Monitor */ -#define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ +#define CFG_MEMTEST_START 0x0100000 /* memtest works on */ +#if (CFG_SDRAM_SIZE) +#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */ +#else +#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ +#endif /* CFG_SDRAM_SIZE */ /* * For booting Linux, the board info and command line data @@ -194,6 +184,9 @@ /*----------------------------------------------------------------------- * FLASH organization */ +#define CFG_FLASH_BASE TEXT_BASE +#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ + #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */ @@ -201,10 +194,13 @@ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_OFFSET 0x00040000 -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - #define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */ +#define CFG_ENV_OFFSET CFG_ENV_SECT_SIZE +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */ + +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ +#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ /*----------------------------------------------------------------------- * Cache Configuration @@ -215,7 +211,7 @@ #endif /*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 + * SYPCR - System Protection Control 11-9 * SYPCR can only be written once after reset! *----------------------------------------------------------------------- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze @@ -228,14 +224,14 @@ #endif /*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 + * SIUMCR - SIU Module Configuration 11-6 *----------------------------------------------------------------------- * PCMCIA config., multi-function pin tri-state */ #define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) /*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 + * TBSCR - Time Base Status and Control 11-26 *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ @@ -249,9 +245,9 @@ #define CFG_PISCR (PISCR_PS | PISCR_PITF) /*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 *----------------------------------------------------------------------- - * set the PLL, the low-power modes and the reset control (15-29) + * set the PLL, the low-power modes and the reset control (15-29) */ #define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | \ PLPRCR_SPLSS | PLPRCR_TEXPS) @@ -283,34 +279,23 @@ /* * Init Memory Controller: * - * BR0/1 and OR0/1 (FLASH) + * BR0/OR0 (Flash) + * BR1/OR1 (BCSR) */ /* the other CS:s are determined by looking at parameters in BCSRx */ #define BCSR_ADDR ((uint) 0xFF010000) #define BCSR_SIZE ((uint)(64 * 1024)) -#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ #define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */ -/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ +/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ #define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX) -#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) - -#ifdef USE_REAL_FLASH_VALUES -/* - * The "default" behaviour with 1Mbyte initial doesn't work for us! - */ -#define CFG_OR0_PRELIM 0x0FFC00D34 /* Real values for the board */ -#define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */ -#else #define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */ #define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_V ) -#endif /* BCSRx - Board Control and Status Registers */ -#define CFG_OR1_REMAP CFG_OR0_REMAP #define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */ #define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V ) @@ -327,7 +312,7 @@ #define PCMCIA_MEM_ADDR ((uint)0xff020000) #define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) -#define BCSR0 ((uint) (BCSR_ADDR + 00)) +#define BCSR0 ((uint) (BCSR_ADDR + 0x00)) #define BCSR1 ((uint) (BCSR_ADDR + 0x04)) #define BCSR2 ((uint) (BCSR_ADDR + 0x08)) #define BCSR3 ((uint) (BCSR_ADDR + 0x0c)) @@ -389,10 +374,6 @@ #define CONFIG_DRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1 -/* Interrupt level assignments. -*/ -#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ - /* We don't use the 8259. */ #define NR_8259_INTS 0 @@ -406,12 +387,10 @@ /* PCMCIA configuration */ -#define PCMCIA_MAX_SLOTS 2 - #ifdef CONFIG_MPC860 #define PCMCIA_SLOT_A 1 #endif -/*#define CFG_PCMCIA_MEM_SIZE ( 64 << 20) */ + #define CFG_PCMCIA_MEM_ADDR (0x50000000) #define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) #define CFG_PCMCIA_DMA_ADDR (0x54000000) |