diff options
author | wdenk <wdenk> | 2002-12-03 21:28:10 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2002-12-03 21:28:10 +0000 |
commit | a6c7ad2f65afaa717ba19cbf9d8d138b5f10ccf9 (patch) | |
tree | 45512cd627310dd322ea38fc9f63109560276475 /include/configs/RPXClassic.h | |
parent | ea909b7604306a400ee3abf57e2fa7b2dde5dde1 (diff) | |
download | bootable_bootloader_goldelico_gta04-a6c7ad2f65afaa717ba19cbf9d8d138b5f10ccf9.zip bootable_bootloader_goldelico_gta04-a6c7ad2f65afaa717ba19cbf9d8d138b5f10ccf9.tar.gz bootable_bootloader_goldelico_gta04-a6c7ad2f65afaa717ba19cbf9d8d138b5f10ccf9.tar.bz2 |
* Fix startup problems with VFD display on TRAB
* Patch by Pierre Aubert, 20 Nov 2002
Add driver for Epson SED13806 graphic controller.
Add support for BMP logos in cfb_console driver.
Diffstat (limited to 'include/configs/RPXClassic.h')
-rw-r--r-- | include/configs/RPXClassic.h | 65 |
1 files changed, 61 insertions, 4 deletions
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index d742a25..f20b8f9 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -47,13 +47,27 @@ #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ - /* Define CONFIG_FEC_ENET to use Fast ethernet instead of ethernet on SCC1 */ -#undef CONFIG_FEC_ENET +#define CONFIG_FEC_ENET #ifdef CONFIG_FEC_ENET #define CFG_DISCOVER_PHY 1 +#define CONFIG_MII 1 #endif /* CONFIG_FEC_ENET */ +/* Video console (graphic: Epson SED13806 on ECCX board, no keyboard */ +#if 1 +#define CONFIG_VIDEO_SED13806 +#define CONFIG_NEC_NL6448BC20 +#define CONFIG_VIDEO_SED13806_16BPP + +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_SW_CURSOR +#endif + #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else @@ -168,7 +182,7 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0xFF000000 -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || (CONFIG_COMMANDS & CFG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -196,7 +210,8 @@ #if 0 #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x20000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x8000 +#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ #else #define CFG_ENV_IS_IN_NVRAM 1 #define CFG_ENV_ADDR 0xfa000100 @@ -353,6 +368,48 @@ #define CFG_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ #define CFG_OR4_PRELIM 0xFFF80970 +/* ECCX CS settings */ +#define SED13806_OR 0xFFC00108 /* - 4 Mo + - Burst inhibit + - external TA */ +#define SED13806_REG_ADDR 0xa0000000 +#define SED13806_ACCES 0x801 /* 16 bit access */ + + +/* Global definitions for the ECCX board */ +#define ECCX_CSR_ADDR (0xfac00000) +#define ECCX_CSR8_OFFSET (0x8) +#define ECCX_CSR11_OFFSET (0xB) +#define ECCX_CSR12_OFFSET (0xC) + +#define ECCX_CSR8 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR8_OFFSET) +#define ECCX_CSR11 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR11_OFFSET) +#define ECCX_CSR12 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR12_OFFSET) + + +#define REG_GPIO_CTRL 0x008 + +/* Definitions for CSR8 */ +#define ECCX_ENEPSON 0x80 /* Bit 0: + 0= disable and reset SED1386 + 1= enable SED1386 */ +/* Bit 1: 0= SED1386 in Big Endian mode */ +/* 1= SED1386 in little endian mode */ +#define ECCX_LE 0x40 +#define ECCX_BE 0x00 + +/* Bit 2,3: Selection */ +/* 00 = Disabled */ +/* 01 = CS2 is used for the SED1386 */ +/* 10 = CS5 is used for the SED1386 */ +/* 11 = reserved */ +#define ECCX_CS2 0x10 +#define ECCX_CS5 0x20 + +/* Definitions for CSR12 */ +#define ECCX_ID 0x02 +#define ECCX_860 0x01 + /* * Memory Periodic Timer Prescaler */ |