added boot script files to repository

1 files changed, 0 insertions, 124 deletions

diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
deleted file mode 100644
index 7b020e6..0000000
--- a/include/configs/bf561-ezkit.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * U-boot - Configuration file for BF561 EZKIT board
- */
-
-#ifndef __CONFIG_BF561_EZKIT_H__
-#define __CONFIG_BF561_EZKIT_H__
-
-#include <asm/config-pre.h>
-
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
-
-
-/*
- * Clock Settings
- *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz					*/
-#define CONFIG_CLKIN_HZ			30000000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
-/*                                                1 = CLKIN / 2		*/
-#define CONFIG_CLKIN_HALF		0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
-/*                                                1 = bypass PLL	*/
-#define CONFIG_PLL_BYPASS		0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
-/* Values can range from 0-63 (where 0 means 64)			*/
-#define CONFIG_VCO_MULT			20
-/* CCLK_DIV controls the core clock divider				*/
-/* Values can be 1, 2, 4, or 8 ONLY					*/
-#define CONFIG_CCLK_DIV			1
-/* SCLK_DIV controls the system clock divider				*/
-/* Values can range from 1-15						*/
-#define CONFIG_SCLK_DIV			6
-
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH	9
-#define CONFIG_MEM_SIZE		64
-
-#define CONFIG_EBIU_SDRRC_VAL	0x306
-#define CONFIG_EBIU_SDGCTL_VAL	0x91114d
-
-#define CONFIG_EBIU_AMGCTL_VAL	0x3F
-#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
-#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
-
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
-
-
-/*
- * Network Settings
- */
-#define ADI_CMDS_NETWORK	1
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111	1
-#define CONFIG_SMC91111_BASE	0x2C010300
-#define CONFIG_SMC_USE_32_BIT	1
-#define CONFIG_HOSTNAME		bf561-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
-
-/*
- * Flash Settings
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET
-#define CONFIG_SYS_FLASH_BASE		0x20000000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	135
-/* The BF561-EZKIT uses a top boot flash */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0x20004000
-#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-#define ENV_IS_EMBEDDED
-#else
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
-#endif
-#ifdef ENV_IS_EMBEDDED
-/* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-# define LDS_BOARD_TEXT \
-	arch/blackfin/lib/libblackfin.o (.text*); \
-	arch/blackfin/cpu/libblackfin.o (.text*); \
-	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o (.text*);
-#endif
-
-
-/*
- * I2C Settings
- */
-#define CONFIG_SOFT_I2C
-#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
-#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
-
-/*
- * Misc Settings
- */
-#define CONFIG_UART_CONSOLE	0
-
-
-/*
- * Pull in common ADI header for remaining command/environment setup
- */
-#include <configs/bfin_adi_common.h>
-
-#endif