Initial revision

1 files changed, 220 insertions, 0 deletions

diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
new file mode 100644
index 0000000..eb5ed2f
--- /dev/null
+++ b/include/configs/lubbock.h
@@ -0,0 +1,220 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Configuation settings for the LUBBOCK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL            /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA250           1       /* This is an PXA250 CPU    */
+#define CONFIG_LUBBOCK          1       /* on an LUBBOCK Board      */
+
+#undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_MALLOC_SIZE      (CFG_ENV_SIZE + 128*1024)
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_FFUART          1       /* we use FFUART on LUBBOCK */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE         115200
+
+#define CONFIG_COMMANDS         (CONFIG_CMD_DFL & ~CFG_CMD_NET)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY        3
+#define CONFIG_BOOTARGS         "root=ramfs devfs=mount console=ttySA0,9600"
+#define CONFIG_ETHADDR          08:00:3e:26:0a:5b
+#define CONFIG_NETMASK          255.255.0.0
+#define CONFIG_IPADDR           192.168.0.21
+#define CONFIG_SERVERIP         192.168.0.250
+#define CONFIG_BOOTCOMMAND      "FIXME"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP                            /* undef to save memory         */
+#define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
+#define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS             16              /* max number of command args   */
+#define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START       0xa0400000      /* memtest works on     */
+#define CFG_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
+
+#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR           0xa8000000      /* default load address */
+
+#define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+
+                                                /* valid baudrates */
+#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS    4          /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1            0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE       0x04000000 /* 64 MB */
+#define PHYS_SDRAM_2            0xa4000000 /* SDRAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE       0x00000000 /* 0 MB */
+#define PHYS_SDRAM_3            0xa8000000 /* SDRAM Bank #3 */
+#define PHYS_SDRAM_3_SIZE       0x00000000 /* 0 MB */
+#define PHYS_SDRAM_4            0xac000000 /* SDRAM Bank #4 */
+#define PHYS_SDRAM_4_SIZE       0x00000000 /* 0 MB */
+
+#define PHYS_FLASH_1            0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2            0x04000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE         0x02000000 /* 32 MB */
+
+#define CFG_DRAM_BASE           0xa0000000
+#define CFG_DRAM_SIZE           0x04000000
+
+#define CFG_FLASH_BASE          PHYS_FLASH_1
+
+#define FPGA_REGS_BASE_PHYSICAL 0x08000000
+
+/*
+ * GPIO settings
+ */
+#define CFG_GPSR0_VAL       0x00008000
+#define CFG_GPSR1_VAL       0x00FC0382
+#define CFG_GPSR2_VAL       0x0001FFFF
+#define CFG_GPCR0_VAL       0x00000000
+#define CFG_GPCR1_VAL       0x00000000
+#define CFG_GPCR2_VAL       0x00000000
+#define CFG_GPDR0_VAL       0x0060A800
+#define CFG_GPDR1_VAL       0x00FF0382
+#define CFG_GPDR2_VAL       0x0001C000
+#define CFG_GAFR0_L_VAL     0x98400000
+#define CFG_GAFR0_U_VAL     0x00002950
+#define CFG_GAFR1_L_VAL     0x000A9558
+#define CFG_GAFR1_U_VAL     0x0005AAAA
+#define CFG_GAFR2_L_VAL     0xA0000000
+#define CFG_GAFR2_U_VAL     0x00000002
+
+#define CFG_PSSR_VAL        0x20
+
+/*
+ * Memory settings
+ */
+#define CFG_MSC0_VAL        0x23F223F2
+#define CFG_MSC1_VAL        0x3FF1A441
+#define CFG_MSC2_VAL        0x7FF17FF1
+#define CFG_MDCNFG_VAL      0x00001AC9
+#define CFG_MDREFR_VAL      0x000BC018
+#define CFG_MDREFR_VAL_100  0x00018018
+#define CFG_MDMRS_VAL       0x00000000
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CFG_MECR_VAL        0x00000000
+#define CFG_MCMEM0_VAL      0x00010504
+#define CFG_MCMEM1_VAL      0x00010504
+#define CFG_MCATT0_VAL      0x00010504
+#define CFG_MCATT1_VAL      0x00010504
+#define CFG_MCIO0_VAL       0x00004715
+#define CFG_MCIO1_VAL       0x00004715
+
+#define _LED        0x08000010
+#define LED_BLANK  (0x08000040)
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks           */
+#define CFG_MAX_FLASH_SECT      128  /* max number of sectors on one chip    */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write */
+
+/* FIXME */
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)        /* Addr of Environment Sector   */
+#define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
+
+
+/*
+ * FPGA Offsets
+ */
+#define WHOAMI_OFFSET           0x00
+#define HEXLED_OFFSET           0x10
+#define BLANKLED_OFFSET         0x40
+#define DISCRETELED_OFFSET      0x40
+#define CNFG_SWITCHES_OFFSET    0x50
+#define USER_SWITCHES_OFFSET    0x60
+#define MISC_WR_OFFSET          0x80
+#define MISC_RD_OFFSET          0x90
+#define INT_MASK_OFFSET         0xC0
+#define INT_CLEAR_OFFSET        0xD0
+#define GP_OFFSET               0x100
+
+#endif  /* __CONFIG_H */