added boot script files to repository

1 files changed, 0 insertions, 350 deletions

diff --git a/include/configs/vct.h b/include/configs/vct.h
deleted file mode 100644
index 325ac8c..0000000
--- a/include/configs/vct.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file contains the configuration parameters for the VCT board
- * family:
- *
- * vct_premium
- * vct_premium_small
- * vct_premium_onenand
- * vct_premium_onenand_small
- * vct_platinum
- * vct_platinum_small
- * vct_platinum_onenand
- * vct_platinum_onenand_small
- * vct_platinumavc
- * vct_platinumavc_small
- * vct_platinumavc_onenand
- * vct_platinumavc_onenand_small
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MIPS32				/* MIPS 4Kc CPU core	*/
-#define CPU_CLOCK_RATE			324000000 /* Clock for the MIPS core */
-#define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE / 2)
-#define CONFIG_SYS_HZ			1000
-
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* SDRAM is initialized by the bootstrap code */
-
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
-#define CONFIG_STACKSIZE		(256 << 10)
-#define CONFIG_SYS_MALLOC_LEN		(1 << 20)
-#define CONFIG_SYS_BOOTPARAMS_LEN	(128 << 10)
-#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
-
-#if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
-#define CONFIG_VCT_NOR
-#else
-#define CONFIG_SYS_NO_FLASH
-#endif
-
-/*
- * UART
- */
-#ifdef CONFIG_VCT_PLATINUMAVC
-#define UART_1_BASE		0xBDC30000
-#else
-#define UART_1_BASE		0xBF89C000
-#endif
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_COM1		UART_1_BASE
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550_CLK		921600
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * SDRAM
- */
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_MBYTES_SDRAM		128
-#define CONFIG_SYS_MEMTEST_START	0x80200000
-#define CONFIG_SYS_MEMTEST_END		0x80400000
-#define CONFIG_SYS_LOAD_ADDR		0x80400000	/* default load address */
-
-#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
-/*
- * SMSC91C11x Network Card
- */
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE	0x00000000
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_NET_MULTI
-#endif
-
-/*
- * Commands
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-/*
- * Only Premium/Platinum have ethernet support right now
- */
-#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
-	!defined(CONFIG_VCT_SMALL_IMAGE)
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SNTP
-#else
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#endif
-
-/*
- * Only Premium/Platinum have USB-EHCI support right now
- */
-#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
-	!defined(CONFIG_VCT_SMALL_IMAGE)
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#endif
-
-#if defined(CONFIG_CMD_USB)
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-#define CONFIG_SUPPORT_VFAT
-
-/*
- * USB/EHCI
- */
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support	*/
-#define CONFIG_USB_EHCI_VCT		/* on VCT platform		*/
-#define CONFIG_EHCI_DCACHE		/* with dcache handling support	*/
-#define CONFIG_EHCI_MMIO_BIG_ENDIAN
-#define CONFIG_EHCI_DESC_BIG_ENDIAN
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
-#endif /* CONFIG_CMD_USB */
-
-#if !defined(CONFIG_VCT_NOR)
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#endif
-
-#if defined(CONFIG_VCT_NAND)
-#define CONFIG_CMD_NAND
-#endif
-
-#if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_CMD_ONENAND
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"VCT# "		/* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-				 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_TIMESTAMP			/* Print image info with timestamp */
-#define CONFIG_CMDLINE_EDITING			/* add command line history	*/
-#define CONFIG_SYS_CONSOLE_INFO_QUIET		/* don't print console @ startup*/
-
-/*
- * FLASH and environment organization
- */
-#if defined(CONFIG_VCT_NOR)
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_FLASH_NOT_MEM_MAPPED
-
-/*
- * We need special accessor functions for the CFI FLASH driver. This
- * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option.
- */
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-
-/*
- * For the non-memory-mapped NOR FLASH, we need to define the
- * NOR FLASH area. This can't be detected via the addr2info()
- * function, since we check for flash access in the very early
- * U-Boot code, before the NOR FLASH is detected.
- */
-#define CONFIG_FLASH_BASE		0xb0000000
-#define CONFIG_FLASH_END		0xbfffffff
-
-/*
- * CFI driver settings
- */
-#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
-#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD (Spansion) reset cmd */
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
-
-#define CONFIG_SYS_FLASH_BASE		0xb0000000
-#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-#endif /* CONFIG_VCT_NOR */
-
-#if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_USE_ONENAND_BOARD_INIT
-#define	CONFIG_ENV_IS_IN_ONENAND
-#define	CONFIG_SYS_ONENAND_BASE		0x00000000	/* this is not real address */
-#define CONFIG_SYS_FLASH_BASE		0x00000000
-#define CONFIG_ENV_ADDR			(128 << 10)	/* after compr. U-Boot image */
-#define	CONFIG_ENV_SIZE			(128 << 10)	/* erase size */
-#endif /* CONFIG_VCT_ONENAND */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE		16384
-#define CONFIG_SYS_ICACHE_SIZE		16384
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-/*
- * I2C/EEPROM
- */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-
-#define CONFIG_SYS_I2C_SPEED		83000	/* 83 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7f
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define CONFIG_SYS_GPIO_I2C_SCL		11
-#define CONFIG_SYS_GPIO_I2C_SDA		10
-
-#ifndef __ASSEMBLY__
-int vct_gpio_dir(int pin, int dir);
-void vct_gpio_set(int pin, int val);
-int vct_gpio_get(int pin);
-#endif
-
-#define I2C_INIT	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1)
-#define I2C_ACTIVE	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1)
-#define I2C_TRISTATE	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0)
-#define I2C_READ	vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA)
-#define I2C_SDA(bit)	vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit)
-#define I2C_SCL(bit)	vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit)
-#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-/* CAT24WC32 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
-					/* 32 byte page write mode using*/
-					/* last 5 bits of the address	*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-
-#define CONFIG_BOOTCOMMAND	"run test3"
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-/*
- * UBI configuration
- */
-#if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_SYS_USE_UBI
-#define	CONFIG_CMD_JFFS2
-#define	CONFIG_CMD_UBI
-#define	CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-
-#define MTDIDS_DEFAULT		"onenand0=onenand"
-#define MTDPARTS_DEFAULT	"mtdparts=onenand:128k(u-boot),"	\
-					"128k(env),"		\
-					"20m(kernel),"		\
-					"-(rootfs)"
-#endif
-
-/*
- * We need a small, stripped down image to fit into the first 128k OneNAND
- * erase block (gzipped). This image only needs basic commands for FLASH
- * (NOR/OneNAND) usage and Linux kernel booting.
- */
-#if defined(CONFIG_VCT_SMALL_IMAGE)
-#undef CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_CACHE
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_CRC32
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_IRQ
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADY
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_SNTP
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_STRINGS
-#undef CONFIG_CMD_TERMINAL
-#undef CONFIG_CMD_USB
-
-#undef CONFIG_SMC911X
-#undef CONFIG_SOFT_I2C
-#undef CONFIG_SOURCE
-#undef CONFIG_SYS_LONGHELP
-#undef CONFIG_TIMESTAMP
-#endif /* CONFIG_VCT_SMALL_IMAGE */
-
-#endif  /* __CONFIG_H */