summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorSergey Kubushyn <ksi@koi8.net>2007-08-10 20:26:18 +0200
committerStefan Roese <sr@denx.de>2007-08-10 20:26:18 +0200
commitc74b2108e31fe09bd1c5d291c3cf360510d4f13e (patch)
tree513414e91717e83f1b78e468c912fc589da9094d /include
parentb0d2962faf200b816410893faff31e54287b9075 (diff)
downloadbootable_bootloader_goldelico_gta04-c74b2108e31fe09bd1c5d291c3cf360510d4f13e.zip
bootable_bootloader_goldelico_gta04-c74b2108e31fe09bd1c5d291c3cf360510d4f13e.tar.gz
bootable_bootloader_goldelico_gta04-c74b2108e31fe09bd1c5d291c3cf360510d4f13e.tar.bz2
[ARM] TI DaVinci support, hopefully final
Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include')
-rw-r--r--include/_exports.h3
-rw-r--r--include/asm-arm/arch-davinci/emac_defs.h311
-rw-r--r--include/asm-arm/arch-davinci/emif_defs.h61
-rw-r--r--include/asm-arm/arch-davinci/hardware.h166
-rw-r--r--include/asm-arm/arch-davinci/i2c_defs.h94
-rw-r--r--include/asm-arm/arch-davinci/nand_defs.h161
-rw-r--r--include/common.h3
-rw-r--r--include/configs/davinci_dvevm.h214
-rw-r--r--include/configs/davinci_schmoogie.h157
-rw-r--r--include/configs/davinci_sonata.h209
-rw-r--r--include/dp83848.h88
-rw-r--r--include/exports.h3
12 files changed, 1470 insertions, 0 deletions
diff --git a/include/_exports.h b/include/_exports.h
index da6e088..af43885 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -14,6 +14,9 @@ EXPORT_FUNC(vprintf)
EXPORT_FUNC(do_reset)
EXPORT_FUNC(getenv)
EXPORT_FUNC(setenv)
+#ifdef CONFIG_HAS_UID
+EXPORT_FUNC(forceenv)
+#endif
EXPORT_FUNC(simple_strtoul)
EXPORT_FUNC(simple_strtol)
EXPORT_FUNC(strcmp)
diff --git a/include/asm-arm/arch-davinci/emac_defs.h b/include/asm-arm/arch-davinci/emac_defs.h
new file mode 100644
index 0000000..0e10116
--- /dev/null
+++ b/include/asm-arm/arch-davinci/emac_defs.h
@@ -0,0 +1,311 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ *
+ */
+
+#ifndef _DM644X_EMAC_H_
+#define _DM644X_EMAC_H_
+
+#include <asm/arch/hardware.h>
+
+#define EMAC_BASE_ADDR (0x01c80000)
+#define EMAC_WRAPPER_BASE_ADDR (0x01c81000)
+#define EMAC_WRAPPER_RAM_ADDR (0x01c82000)
+#define EMAC_MDIO_BASE_ADDR (0x01c84000)
+
+/* MDIO module input frequency */
+#define EMAC_MDIO_BUS_FREQ 99000000 /* PLL/6 - 99 MHz */
+/* MDIO clock output frequency */
+#define EMAC_MDIO_CLOCK_FREQ 2000000 /* 2.0 MHz */
+
+/* Ethernet Min/Max packet size */
+#define EMAC_MIN_ETHERNET_PKT_SIZE 60
+#define EMAC_MAX_ETHERNET_PKT_SIZE 1518
+#define EMAC_PKT_ALIGN 18 /* 1518 + 18 = 1536 (packet aligned on 32 byte boundry) */
+
+/* Number of RX packet buffers
+ * NOTE: Only 1 buffer supported as of now
+ */
+#define EMAC_MAX_RX_BUFFERS 10
+
+
+/***********************************************
+ ******** Internally used macros ***************
+ ***********************************************/
+
+#define EMAC_CH_TX 1
+#define EMAC_CH_RX 0
+
+/* Each descriptor occupies 4 words, lets start RX desc's at 0 and
+ * reserve space for 64 descriptors max
+ */
+#define EMAC_RX_DESC_BASE 0x0
+#define EMAC_TX_DESC_BASE 0x1000
+
+/* EMAC Teardown value */
+#define EMAC_TEARDOWN_VALUE 0xfffffffc
+
+/* MII Status Register */
+#define MII_STATUS_REG 1
+
+/* Number of statistics registers */
+#define EMAC_NUM_STATS 36
+
+
+/* EMAC Descriptor */
+typedef volatile struct _emac_desc
+{
+ u_int32_t next; /* Pointer to next descriptor in chain */
+ u_int8_t *buffer; /* Pointer to data buffer */
+ u_int32_t buff_off_len; /* Buffer Offset(MSW) and Length(LSW) */
+ u_int32_t pkt_flag_len; /* Packet Flags(MSW) and Length(LSW) */
+} emac_desc;
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT (0x80000000)
+#define EMAC_CPPI_EOP_BIT (0x40000000)
+#define EMAC_CPPI_OWNERSHIP_BIT (0x20000000)
+#define EMAC_CPPI_EOQ_BIT (0x10000000)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT (0x08000000)
+#define EMAC_CPPI_PASS_CRC_BIT (0x04000000)
+
+#define EMAC_CPPI_RX_ERROR_FRAME (0x03fc0000)
+
+#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20)
+#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1)
+
+#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE (0x200000)
+#define EMAC_RXMBPENABLE_RXBROADEN (0x2000)
+
+
+#define MDIO_CONTROL_IDLE (0x80000000)
+#define MDIO_CONTROL_ENABLE (0x40000000)
+#define MDIO_CONTROL_FAULT_ENABLE (0x40000)
+#define MDIO_CONTROL_FAULT (0x80000)
+#define MDIO_USERACCESS0_GO (0x80000000)
+#define MDIO_USERACCESS0_WRITE_READ (0x0)
+#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000)
+#define MDIO_USERACCESS0_ACK (0x20000000)
+
+/* Ethernet MAC Registers Structure */
+typedef struct {
+ dv_reg TXIDVER;
+ dv_reg TXCONTROL;
+ dv_reg TXTEARDOWN;
+ u_int8_t RSVD0[4];
+ dv_reg RXIDVER;
+ dv_reg RXCONTROL;
+ dv_reg RXTEARDOWN;
+ u_int8_t RSVD1[100];
+ dv_reg TXINTSTATRAW;
+ dv_reg TXINTSTATMASKED;
+ dv_reg TXINTMASKSET;
+ dv_reg TXINTMASKCLEAR;
+ dv_reg MACINVECTOR;
+ u_int8_t RSVD2[12];
+ dv_reg RXINTSTATRAW;
+ dv_reg RXINTSTATMASKED;
+ dv_reg RXINTMASKSET;
+ dv_reg RXINTMASKCLEAR;
+ dv_reg MACINTSTATRAW;
+ dv_reg MACINTSTATMASKED;
+ dv_reg MACINTMASKSET;
+ dv_reg MACINTMASKCLEAR;
+ u_int8_t RSVD3[64];
+ dv_reg RXMBPENABLE;
+ dv_reg RXUNICASTSET;
+ dv_reg RXUNICASTCLEAR;
+ dv_reg RXMAXLEN;
+ dv_reg RXBUFFEROFFSET;
+ dv_reg RXFILTERLOWTHRESH;
+ u_int8_t RSVD4[8];
+ dv_reg RX0FLOWTHRESH;
+ dv_reg RX1FLOWTHRESH;
+ dv_reg RX2FLOWTHRESH;
+ dv_reg RX3FLOWTHRESH;
+ dv_reg RX4FLOWTHRESH;
+ dv_reg RX5FLOWTHRESH;
+ dv_reg RX6FLOWTHRESH;
+ dv_reg RX7FLOWTHRESH;
+ dv_reg RX0FREEBUFFER;
+ dv_reg RX1FREEBUFFER;
+ dv_reg RX2FREEBUFFER;
+ dv_reg RX3FREEBUFFER;
+ dv_reg RX4FREEBUFFER;
+ dv_reg RX5FREEBUFFER;
+ dv_reg RX6FREEBUFFER;
+ dv_reg RX7FREEBUFFER;
+ dv_reg MACCONTROL;
+ dv_reg MACSTATUS;
+ dv_reg EMCONTROL;
+ dv_reg FIFOCONTROL;
+ dv_reg MACCONFIG;
+ dv_reg SOFTRESET;
+ u_int8_t RSVD5[88];
+ dv_reg MACSRCADDRLO;
+ dv_reg MACSRCADDRHI;
+ dv_reg MACHASH1;
+ dv_reg MACHASH2;
+ dv_reg BOFFTEST;
+ dv_reg TPACETEST;
+ dv_reg RXPAUSE;
+ dv_reg TXPAUSE;
+ u_int8_t RSVD6[16];
+ dv_reg RXGOODFRAMES;
+ dv_reg RXBCASTFRAMES;
+ dv_reg RXMCASTFRAMES;
+ dv_reg RXPAUSEFRAMES;
+ dv_reg RXCRCERRORS;
+ dv_reg RXALIGNCODEERRORS;
+ dv_reg RXOVERSIZED;
+ dv_reg RXJABBER;
+ dv_reg RXUNDERSIZED;
+ dv_reg RXFRAGMENTS;
+ dv_reg RXFILTERED;
+ dv_reg RXQOSFILTERED;
+ dv_reg RXOCTETS;
+ dv_reg TXGOODFRAMES;
+ dv_reg TXBCASTFRAMES;
+ dv_reg TXMCASTFRAMES;
+ dv_reg TXPAUSEFRAMES;
+ dv_reg TXDEFERRED;
+ dv_reg TXCOLLISION;
+ dv_reg TXSINGLECOLL;
+ dv_reg TXMULTICOLL;
+ dv_reg TXEXCESSIVECOLL;
+ dv_reg TXLATECOLL;
+ dv_reg TXUNDERRUN;
+ dv_reg TXCARRIERSENSE;
+ dv_reg TXOCTETS;
+ dv_reg FRAME64;
+ dv_reg FRAME65T127;
+ dv_reg FRAME128T255;
+ dv_reg FRAME256T511;
+ dv_reg FRAME512T1023;
+ dv_reg FRAME1024TUP;
+ dv_reg NETOCTETS;
+ dv_reg RXSOFOVERRUNS;
+ dv_reg RXMOFOVERRUNS;
+ dv_reg RXDMAOVERRUNS;
+ u_int8_t RSVD7[624];
+ dv_reg MACADDRLO;
+ dv_reg MACADDRHI;
+ dv_reg MACINDEX;
+ u_int8_t RSVD8[244];
+ dv_reg TX0HDP;
+ dv_reg TX1HDP;
+ dv_reg TX2HDP;
+ dv_reg TX3HDP;
+ dv_reg TX4HDP;
+ dv_reg TX5HDP;
+ dv_reg TX6HDP;
+ dv_reg TX7HDP;
+ dv_reg RX0HDP;
+ dv_reg RX1HDP;
+ dv_reg RX2HDP;
+ dv_reg RX3HDP;
+ dv_reg RX4HDP;
+ dv_reg RX5HDP;
+ dv_reg RX6HDP;
+ dv_reg RX7HDP;
+ dv_reg TX0CP;
+ dv_reg TX1CP;
+ dv_reg TX2CP;
+ dv_reg TX3CP;
+ dv_reg TX4CP;
+ dv_reg TX5CP;
+ dv_reg TX6CP;
+ dv_reg TX7CP;
+ dv_reg RX0CP;
+ dv_reg RX1CP;
+ dv_reg RX2CP;
+ dv_reg RX3CP;
+ dv_reg RX4CP;
+ dv_reg RX5CP;
+ dv_reg RX6CP;
+ dv_reg RX7CP;
+} emac_regs;
+
+/* EMAC Wrapper Registers Structure */
+typedef struct {
+ u_int8_t RSVD0[4100];
+ dv_reg EWCTL;
+ dv_reg EWINTTCNT;
+} ewrap_regs;
+
+
+/* EMAC MDIO Registers Structure */
+typedef struct {
+ dv_reg VERSION;
+ dv_reg CONTROL;
+ dv_reg ALIVE;
+ dv_reg LINK;
+ dv_reg LINKINTRAW;
+ dv_reg LINKINTMASKED;
+ u_int8_t RSVD0[8];
+ dv_reg USERINTRAW;
+ dv_reg USERINTMASKED;
+ dv_reg USERINTMASKSET;
+ dv_reg USERINTMASKCLEAR;
+ u_int8_t RSVD1[80];
+ dv_reg USERACCESS0;
+ dv_reg USERPHYSEL0;
+ dv_reg USERACCESS1;
+ dv_reg USERPHYSEL1;
+} mdio_regs;
+
+int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data);
+int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data);
+
+typedef struct
+{
+ char name[64];
+ int (*init)(int phy_addr);
+ int (*is_phy_connected)(int phy_addr);
+ int (*get_link_speed)(int phy_addr);
+ int (*auto_negotiate)(int phy_addr);
+} phy_t;
+
+#define PHY_LXT972 (0x001378e2)
+int lxt972_is_phy_connected(int phy_addr);
+int lxt972_get_link_speed(int phy_addr);
+int lxt972_init_phy(int phy_addr);
+int lxt972_auto_negotiate(int phy_addr);
+
+#define PHY_DP83848 (0x20005c90)
+int dp83848_is_phy_connected(int phy_addr);
+int dp83848_get_link_speed(int phy_addr);
+int dp83848_init_phy(int phy_addr);
+int dp83848_auto_negotiate(int phy_addr);
+
+#endif /* _DM644X_EMAC_H_ */
diff --git a/include/asm-arm/arch-davinci/emif_defs.h b/include/asm-arm/arch-davinci/emif_defs.h
new file mode 100644
index 0000000..646fc77
--- /dev/null
+++ b/include/asm-arm/arch-davinci/emif_defs.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _EMIF_DEFS_H_
+#define _EMIF_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+typedef struct {
+ dv_reg ERCSR;
+ dv_reg AWCCR;
+ dv_reg SDBCR;
+ dv_reg SDRCR;
+ dv_reg AB1CR;
+ dv_reg AB2CR;
+ dv_reg AB3CR;
+ dv_reg AB4CR;
+ dv_reg SDTIMR;
+ dv_reg DDRSR;
+ dv_reg DDRPHYCR;
+ dv_reg DDRPHYSR;
+ dv_reg TOTAR;
+ dv_reg TOTACTR;
+ dv_reg DDRPHYID_REV;
+ dv_reg SDSRETR;
+ dv_reg EIRR;
+ dv_reg EIMR;
+ dv_reg EIMSR;
+ dv_reg EIMCR;
+ dv_reg IOCTRLR;
+ dv_reg IOSTATR;
+ u_int8_t RSVD0[8];
+ dv_reg NANDFCR;
+ dv_reg NANDFSR;
+ u_int8_t RSVD1[8];
+ dv_reg NANDF1ECC;
+ dv_reg NANDF2ECC;
+ dv_reg NANDF3ECC;
+ dv_reg NANDF4ECC;
+} emif_registers;
+
+typedef emif_registers *emifregs;
+#endif
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
new file mode 100644
index 0000000..ebcdcfe
--- /dev/null
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * -------------------------------------------------------------------------
+ *
+ * linux/include/asm-arm/arch-davinci/hardware.h
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <config.h>
+#include <asm/sizes.h>
+
+#define REG(addr) (*(volatile unsigned int *)(addr))
+#define REG_P(addr) ((volatile unsigned int *)(addr))
+
+typedef volatile unsigned int dv_reg;
+typedef volatile unsigned int * dv_reg_p;
+
+/*
+ * Base register addresses
+ */
+#define DAVINCI_DMA_3PCC_BASE (0x01c00000)
+#define DAVINCI_DMA_3PTC0_BASE (0x01c10000)
+#define DAVINCI_DMA_3PTC1_BASE (0x01c10400)
+#define DAVINCI_UART0_BASE (0x01c20000)
+#define DAVINCI_UART1_BASE (0x01c20400)
+#define DAVINCI_UART2_BASE (0x01c20800)
+#define DAVINCI_I2C_BASE (0x01c21000)
+#define DAVINCI_TIMER0_BASE (0x01c21400)
+#define DAVINCI_TIMER1_BASE (0x01c21800)
+#define DAVINCI_WDOG_BASE (0x01c21c00)
+#define DAVINCI_PWM0_BASE (0x01c22000)
+#define DAVINCI_PWM1_BASE (0x01c22400)
+#define DAVINCI_PWM2_BASE (0x01c22800)
+#define DAVINCI_SYSTEM_MODULE_BASE (0x01c40000)
+#define DAVINCI_PLL_CNTRL0_BASE (0x01c40800)
+#define DAVINCI_PLL_CNTRL1_BASE (0x01c40c00)
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01c41000)
+#define DAVINCI_SYSTEM_DFT_BASE (0x01c42000)
+#define DAVINCI_ARM_INTC_BASE (0x01c48000)
+#define DAVINCI_IEEE1394_BASE (0x01c60000)
+#define DAVINCI_USB_OTG_BASE (0x01c64000)
+#define DAVINCI_CFC_ATA_BASE (0x01c66000)
+#define DAVINCI_SPI_BASE (0x01c66800)
+#define DAVINCI_GPIO_BASE (0x01c67000)
+#define DAVINCI_UHPI_BASE (0x01c67800)
+#define DAVINCI_VPSS_REGS_BASE (0x01c70000)
+#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01c80000)
+#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01c81000)
+#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01c82000)
+#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01c84000)
+#define DAVINCI_IMCOP_BASE (0x01cc0000)
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01e00000)
+#define DAVINCI_VLYNQ_BASE (0x01e01000)
+#define DAVINCI_MCBSP_BASE (0x01e02000)
+#define DAVINCI_MMC_SD_BASE (0x01e10000)
+#define DAVINCI_MS_BASE (0x01e20000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
+#define DAVINCI_VLYNQ_REMOTE_BASE (0x0c000000)
+
+/* Power and Sleep Controller (PSC) Domains */
+#define DAVINCI_GPSC_ARMDOMAIN 0
+#define DAVINCI_GPSC_DSPDOMAIN 1
+
+#define DAVINCI_LPSC_VPSSMSTR 0
+#define DAVINCI_LPSC_VPSSSLV 1
+#define DAVINCI_LPSC_TPCC 2
+#define DAVINCI_LPSC_TPTC0 3
+#define DAVINCI_LPSC_TPTC1 4
+#define DAVINCI_LPSC_EMAC 5
+#define DAVINCI_LPSC_EMAC_WRAPPER 6
+#define DAVINCI_LPSC_MDIO 7
+#define DAVINCI_LPSC_IEEE1394 8
+#define DAVINCI_LPSC_USB 9
+#define DAVINCI_LPSC_ATA 10
+#define DAVINCI_LPSC_VLYNQ 11
+#define DAVINCI_LPSC_UHPI 12
+#define DAVINCI_LPSC_DDR_EMIF 13
+#define DAVINCI_LPSC_AEMIF 14
+#define DAVINCI_LPSC_MMC_SD 15
+#define DAVINCI_LPSC_MEMSTICK 16
+#define DAVINCI_LPSC_McBSP 17
+#define DAVINCI_LPSC_I2C 18
+#define DAVINCI_LPSC_UART0 19
+#define DAVINCI_LPSC_UART1 20
+#define DAVINCI_LPSC_UART2 21
+#define DAVINCI_LPSC_SPI 22
+#define DAVINCI_LPSC_PWM0 23
+#define DAVINCI_LPSC_PWM1 24
+#define DAVINCI_LPSC_PWM2 25
+#define DAVINCI_LPSC_GPIO 26
+#define DAVINCI_LPSC_TIMER0 27
+#define DAVINCI_LPSC_TIMER1 28
+#define DAVINCI_LPSC_TIMER2 29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
+#define DAVINCI_LPSC_ARM 31
+#define DAVINCI_LPSC_SCR2 32
+#define DAVINCI_LPSC_SCR3 33
+#define DAVINCI_LPSC_SCR4 34
+#define DAVINCI_LPSC_CROSSBAR 35
+#define DAVINCI_LPSC_CFG27 36
+#define DAVINCI_LPSC_CFG3 37
+#define DAVINCI_LPSC_CFG5 38
+#define DAVINCI_LPSC_GEM 39
+#define DAVINCI_LPSC_IMCOP 40
+
+/* Some PSC defines */
+#define PSC_CHP_SHRTSW (0x01c40038)
+#define PSC_GBLCTL (0x01c41010)
+#define PSC_EPCPR (0x01c41070)
+#define PSC_EPCCR (0x01c41078)
+#define PSC_PTCMD (0x01c41120)
+#define PSC_PTSTAT (0x01c41128)
+#define PSC_PDSTAT (0x01c41200)
+#define PSC_PDSTAT1 (0x01c41204)
+#define PSC_PDCTL (0x01c41300)
+#define PSC_PDCTL1 (0x01c41304)
+
+#define PSC_MDCTL_BASE (0x01c41a00)
+#define PSC_MDSTAT_BASE (0x01c41800)
+
+#define VDD3P3V_PWDN (0x01c40048)
+#define UART0_PWREMU_MGMT (0x01c20030)
+
+#define PSC_SILVER_BULLET (0x01c41a20)
+
+/* Some PLL defines */
+#define PLL1_PLLM (0x01c40910)
+#define PLL2_PLLM (0x01c40d10)
+#define PLL2_DIV2 (0x01c40d1c)
+
+/* Miscellania... */
+#define VBPR (0x20000020)
+#define PINMUX0 (0x01c40000)
+#define PINMUX1 (0x01c40004)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-davinci/i2c_defs.h b/include/asm-arm/arch-davinci/i2c_defs.h
new file mode 100644
index 0000000..2e902e1
--- /dev/null
+++ b/include/asm-arm/arch-davinci/i2c_defs.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ *
+ * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _DAVINCI_I2C_H_
+#define _DAVINCI_I2C_H_
+
+#define I2C_WRITE 0
+#define I2C_READ 1
+
+#define I2C_BASE 0x01c21000
+
+#define I2C_OA (I2C_BASE + 0x00)
+#define I2C_IE (I2C_BASE + 0x04)
+#define I2C_STAT (I2C_BASE + 0x08)
+#define I2C_SCLL (I2C_BASE + 0x0c)
+#define I2C_SCLH (I2C_BASE + 0x10)
+#define I2C_CNT (I2C_BASE + 0x14)
+#define I2C_DRR (I2C_BASE + 0x18)
+#define I2C_SA (I2C_BASE + 0x1c)
+#define I2C_DXR (I2C_BASE + 0x20)
+#define I2C_CON (I2C_BASE + 0x24)
+#define I2C_IV (I2C_BASE + 0x28)
+#define I2C_PSC (I2C_BASE + 0x30)
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_SCD_IE (1 << 5) /* Stop condition detect interrupt enable */
+#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_BB (1 << 12) /* Bus busy */
+#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
+#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
+#define I2C_STAT_AAS (1 << 9) /* Address as slave */
+#define I2C_STAT_SCD (1 << 5) /* Stop condition detect */
+#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
+#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
+#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
+#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
+
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK 7
+#define I2C_INTCODE_NONE 0
+#define I2C_INTCODE_AL 1 /* Arbitration lost */
+#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY 3 /* Register access ready */
+#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
+#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
+#define I2C_INTCODE_SCD 6 /* Stop condition detect */
+
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN (1 << 5) /* I2C module enable */
+#define I2C_CON_STB (1 << 4) /* Start byte mode (master mode only) */
+#define I2C_CON_MST (1 << 10) /* Master/slave mode */
+#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */
+#define I2C_CON_XA (1 << 8) /* Expand address */
+#define I2C_CON_STP (1 << 11) /* Stop condition (master mode only) */
+#define I2C_CON_STT (1 << 13) /* Start condition (master mode only) */
+
+#define I2C_TIMEOUT 0xffff0000 /* Timeout mask for poll_i2c_irq() */
+
+#endif
diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h
new file mode 100644
index 0000000..619bd47
--- /dev/null
+++ b/include/asm-arm/arch-davinci/nand_defs.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts shamelesly stolen from Linux Kernel source tree.
+ *
+ * ------------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _NAND_DEFS_H_
+#define _NAND_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+#define MASK_CLE 0x10
+#define MASK_ALE 0x0a
+
+#define NAND_CE0CLE ((volatile u_int8_t *)(CFG_NAND_BASE + 0x10))
+#define NAND_CE0ALE ((volatile u_int8_t *)(CFG_NAND_BASE + 0x0a))
+#define NAND_CE0DATA ((volatile u_int8_t *)CFG_NAND_BASE)
+
+typedef struct {
+ u_int32_t NRCSR;
+ u_int32_t AWCCR;
+ u_int8_t RSVD0[8];
+ u_int32_t AB1CR;
+ u_int32_t AB2CR;
+ u_int32_t AB3CR;
+ u_int32_t AB4CR;
+ u_int8_t RSVD1[32];
+ u_int32_t NIRR;
+ u_int32_t NIMR;
+ u_int32_t NIMSR;
+ u_int32_t NIMCR;
+ u_int8_t RSVD2[16];
+ u_int32_t NANDFCR;
+ u_int32_t NANDFSR;
+ u_int8_t RSVD3[8];
+ u_int32_t NANDF1ECC;
+ u_int32_t NANDF2ECC;
+ u_int32_t NANDF3ECC;
+ u_int32_t NANDF4ECC;
+ u_int8_t RSVD4[4];
+ u_int32_t IODFTECR;
+ u_int32_t IODFTGCR;
+ u_int8_t RSVD5[4];
+ u_int32_t IODFTMRLR;
+ u_int32_t IODFTMRMR;
+ u_int32_t IODFTMRMSBR;
+ u_int8_t RSVD6[20];
+ u_int32_t MODRNR;
+ u_int8_t RSVD7[76];
+ u_int32_t CE0DATA;
+ u_int32_t CE0ALE;
+ u_int32_t CE0CLE;
+ u_int8_t RSVD8[4];
+ u_int32_t CE1DATA;
+ u_int32_t CE1ALE;
+ u_int32_t CE1CLE;
+ u_int8_t RSVD9[4];
+ u_int32_t CE2DATA;
+ u_int32_t CE2ALE;
+ u_int32_t CE2CLE;
+ u_int8_t RSVD10[4];
+ u_int32_t CE3DATA;
+ u_int32_t CE3ALE;
+ u_int32_t CE3CLE;
+} nand_registers;
+
+typedef volatile nand_registers *nandregs;
+
+#define NAND_READ_START 0x00
+#define NAND_READ_END 0x30
+#define NAND_STATUS 0x70
+
+#ifdef CFG_NAND_HW_ECC
+#define NAND_Ecc_P1e (1 << 0)
+#define NAND_Ecc_P2e (1 << 1)
+#define NAND_Ecc_P4e (1 << 2)
+#define NAND_Ecc_P8e (1 << 3)
+#define NAND_Ecc_P16e (1 << 4)
+#define NAND_Ecc_P32e (1 << 5)
+#define NAND_Ecc_P64e (1 << 6)
+#define NAND_Ecc_P128e (1 << 7)
+#define NAND_Ecc_P256e (1 << 8)
+#define NAND_Ecc_P512e (1 << 9)
+#define NAND_Ecc_P1024e (1 << 10)
+#define NAND_Ecc_P2048e (1 << 11)
+
+#define NAND_Ecc_P1o (1 << 16)
+#define NAND_Ecc_P2o (1 << 17)
+#define NAND_Ecc_P4o (1 << 18)
+#define NAND_Ecc_P8o (1 << 19)
+#define NAND_Ecc_P16o (1 << 20)
+#define NAND_Ecc_P32o (1 << 21)
+#define NAND_Ecc_P64o (1 << 22)
+#define NAND_Ecc_P128o (1 << 23)
+#define NAND_Ecc_P256o (1 << 24)
+#define NAND_Ecc_P512o (1 << 25)
+#define NAND_Ecc_P1024o (1 << 26)
+#define NAND_Ecc_P2048o (1 << 27)
+
+#define TF(v) (v ? 1 : 0)
+
+#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0)
+#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1)
+#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2)
+#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3)
+#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4)
+#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5)
+#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6)
+#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7)
+
+#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0)
+#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1)
+#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2)
+#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3)
+#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4)
+#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5)
+#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6)
+#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7)
+
+#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0)
+#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1)
+#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2)
+#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3)
+#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4)
+#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5)
+#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6)
+#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7)
+
+#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0)
+#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1)
+#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2)
+#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3)
+#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4)
+#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5)
+#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6)
+#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7)
+
+#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
+#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
+#endif
+
+#endif
diff --git a/include/common.h b/include/common.h
index ac29d3a..229e64b 100644
--- a/include/common.h
+++ b/include/common.h
@@ -241,6 +241,9 @@ int saveenv (void);
void inline setenv (char *, char *);
#else
void setenv (char *, char *);
+#ifdef CONFIG_HAS_UID
+void forceenv (char *, char *);
+#endif
#endif /* CONFIG_PPC */
#ifdef CONFIG_ARM
# include <asm/mach-types.h>
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
new file mode 100644
index 0000000..8ecd059
--- /dev/null
+++ b/include/configs/davinci_dvevm.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * Define this to make U-Boot skip low level initialization when loaded
+ * by initial bootloader. Not required by NAND U-Boot version but IS
+ * required for a NOR version used to burn the real NOR U-Boot into
+ * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
+ * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
+ * NOR U-Boot is loaded directly from Flash so it must perform all the
+ * low level initialization itself. NAND version is loaded by an initial
+ * bootloader (UBL in TI-ese) that performs such an initialization so it's
+ * skipped in NAND version. The third DaVinci boot mode loads a bootloader
+ * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
+ * performing low level init prior to loading. All that means we can NOT use
+ * NAND version to put U-Boot into NOR because it doesn't have NOR support and
+ * we can NOT use NOR version because it performs low level initialization
+ * effectively destroying itself in DDR memory. That's why a separate NOR
+ * version with this define is needed. It is loaded via UART, then one uses
+ * it to somehow download a proper NOR version built WITHOUT this define to
+ * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
+ * NOR support into the initial bootloader so it won't be needed but DaVinci
+ * static RAM might be too small for this (I have something like 2Kbytes left
+ * as of now, without NOR support) so this might've not happened...
+ *
+#define CONFIG_NOR_UART_BOOT
+ */
+
+/*=======*/
+/* Board */
+/*=======*/
+#define DV_EVM
+#define CFG_NAND_SMALLPAGE
+#define CFG_USE_NOR
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
+/*====================================================*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
+#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#ifdef CFG_USE_NAND
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#ifdef CFG_NAND_SMALLPAGE
+#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_16K
+#else
+#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_128K
+#endif
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define DEF_BOOTM ""
+#elif defined(CFG_USE_NOR)
+#ifdef CONFIG_NOR_UART_BOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#else
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_NO_FLASH
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#endif
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CFG_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#elif defined(CFG_USE_NOR)
+#define CONFIG_CMD_JFFS2
+#else
+#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#endif
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
new file mode 100644
index 0000000..96c9a30
--- /dev/null
+++ b/include/configs/davinci_schmoogie.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*=======*/
+/* Board */
+/*=======*/
+#define SCHMOOGIE
+#define CFG_NAND_LARGEPAGE
+#define CFG_USE_NAND
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_128K
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+/*=====================*/
+/* Board related stuff */
+/*=====================*/
+#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */
+#define CFG_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */
+#define CONFIG_HAS_UID
+#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */
+#define CFG_UID_ADDR 0x50 /* UID chip I2C address */
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NAND
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
new file mode 100644
index 0000000..de8c4fa
--- /dev/null
+++ b/include/configs/davinci_sonata.h
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * Define this to make U-Boot skip low level initialization when loaded
+ * by initial bootloader. Not required by NAND U-Boot version but IS
+ * required for a NOR version used to burn the real NOR U-Boot into
+ * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
+ * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
+ * NOR U-Boot is loaded directly from Flash so it must perform all the
+ * low level initialization itself. NAND version is loaded by an initial
+ * bootloader (UBL in TI-ese) that performs such an initialization so it's
+ * skipped in NAND version. The third DaVinci boot mode loads a bootloader
+ * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
+ * performing low level init prior to loading. All that means we can NOT use
+ * NAND version to put U-Boot into NOR because it doesn't have NOR support and
+ * we can NOT use NOR version because it performs low level initialization
+ * effectively destroying itself in DDR memory. That's why a separate NOR
+ * version with this define is needed. It is loaded via UART, then one uses
+ * it to somehow download a proper NOR version built WITHOUT this define to
+ * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
+ * NOR support into the initial bootloader so it won't be needed but DaVinci
+ * static RAM might be too small for this (I have something like 2Kbytes left
+ * as of now, without NOR support) so this might've not happened...
+ *
+#define CONFIG_NOR_UART_BOOT
+ */
+
+/*=======*/
+/* Board */
+/*=======*/
+#define SONATA_BOARD
+#define CFG_NAND_SMALLPAGE
+#define CFG_USE_NOR
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
+/*====================================================*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#ifdef CFG_USE_NAND
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_16K
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define DEF_BOOTM ""
+#elif defined(CFG_USE_NOR)
+#ifdef CONFIG_NOR_UART_BOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#else
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_NO_FLASH
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2)
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#endif
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CFG_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#elif defined(CFG_USE_NOR)
+#define CONFIG_CMD_JFFS2
+#else
+#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#endif
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/dp83848.h b/include/dp83848.h
new file mode 100644
index 0000000..274bc4c
--- /dev/null
+++ b/include/dp83848.h
@@ -0,0 +1,88 @@
+/*
+ * DP83848 ethernet Physical layer
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+/* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */
+
+#define DP83848_CTL_REG 0x0 /* Basic Mode Control Reg */
+#define DP83848_STAT_REG 0x1 /* Basic Mode Status Reg */
+#define DP83848_PHYID1_REG 0x2 /* PHY Idendifier Reg 1 */
+#define DP83848_PHYID2_REG 0x3 /* PHY Idendifier Reg 2 */
+#define DP83848_ANA_REG 0x4 /* Auto_Neg Advt Reg */
+#define DP83848_ANLPA_REG 0x5 /* Auto_neg Link Partner Ability Reg */
+#define DP83848_ANE_REG 0x6 /* Auto-neg Expansion Reg */
+#define DP83848_PHY_STAT_REG 0x10 /* PHY Status Register */
+#define DP83848_PHY_INTR_CTRL_REG 0x11 /* PHY Interrupt Control Register */
+#define DP83848_PHY_CTRL_REG 0x19 /* PHY Status Register */
+
+/*--Bit definitions: DP83848_CTL_REG */
+#define DP83848_RESET (1 << 15) /* 1= S/W Reset */
+#define DP83848_LOOPBACK (1 << 14) /* 1=loopback Enabled */
+#define DP83848_SPEED_SELECT (1 << 13)
+#define DP83848_AUTONEG (1 << 12)
+#define DP83848_POWER_DOWN (1 << 11)
+#define DP83848_ISOLATE (1 << 10)
+#define DP83848_RESTART_AUTONEG (1 << 9)
+#define DP83848_DUPLEX_MODE (1 << 8)
+#define DP83848_COLLISION_TEST (1 << 7)
+
+/*--Bit definitions: DP83848_STAT_REG */
+#define DP83848_100BASE_T4 (1 << 15)
+#define DP83848_100BASE_TX_FD (1 << 14)
+#define DP83848_100BASE_TX_HD (1 << 13)
+#define DP83848_10BASE_T_FD (1 << 12)
+#define DP83848_10BASE_T_HD (1 << 11)
+#define DP83848_MF_PREAMB_SUPPR (1 << 6)
+#define DP83848_AUTONEG_COMP (1 << 5)
+#define DP83848_RMT_FAULT (1 << 4)
+#define DP83848_AUTONEG_ABILITY (1 << 3)
+#define DP83848_LINK_STATUS (1 << 2)
+#define DP83848_JABBER_DETECT (1 << 1)
+#define DP83848_EXTEND_CAPAB (1 << 0)
+
+/*--definitions: DP83848_PHYID1 */
+#define DP83848_PHYID1_OUI 0x2000
+#define DP83848_PHYID2_OUI 0x5c90
+
+/*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */
+#define DP83848_NP (1 << 15)
+#define DP83848_ACK (1 << 14)
+#define DP83848_RF (1 << 13)
+#define DP83848_PAUSE (1 << 10)
+#define DP83848_T4 (1 << 9)
+#define DP83848_TX_FDX (1 << 8)
+#define DP83848_TX_HDX (1 << 7)
+#define DP83848_10_FDX (1 << 6)
+#define DP83848_10_HDX (1 << 5)
+#define DP83848_AN_IEEE_802_3 0x0001
+
+/*--Bit definitions: DP83848_ANER */
+#define DP83848_PDF (1 << 4)
+#define DP83848_LP_NP_ABLE (1 << 3)
+#define DP83848_NP_ABLE (1 << 2)
+#define DP83848_PAGE_RX (1 << 1)
+#define DP83848_LP_AN_ABLE (1 << 0)
+
+/*--Bit definitions: DP83848_PHY_STAT */
+#define DP83848_RX_ERR_LATCH (1 << 13)
+#define DP83848_POLARITY_STAT (1 << 12)
+#define DP83848_FALSE_CAR_SENSE (1 << 11)
+#define DP83848_SIG_DETECT (1 << 10)
+#define DP83848_DESCRAM_LOCK (1 << 9)
+#define DP83848_PAGE_RCV (1 << 8)
+#define DP83848_PHY_RMT_FAULT (1 << 6)
+#define DP83848_JABBER (1 << 5)
+#define DP83848_AUTONEG_COMPLETE (1 << 4)
+#define DP83848_LOOPBACK_STAT (1 << 3)
+#define DP83848_DUPLEX (1 << 2)
+#define DP83848_SPEED (1 << 1)
+#define DP83848_LINK (1 << 0)
diff --git a/include/exports.h b/include/exports.h
index 0516da9..d6512cb 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -25,6 +25,9 @@ char *getenv (char *name);
void setenv (char *varname, char *varvalue);
long simple_strtol(const char *cp,char **endp,unsigned int base);
int strcmp(const char * cs,const char * ct);
+#ifdef CONFIG_HAS_UID
+void forceenv (char *varname, char *varvalue);
+#endif
#if defined(CONFIG_CMD_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);