diff options
author | H. Nikolaus Schaller <hns@goldelico.com> | 2012-03-26 20:55:28 +0200 |
---|---|---|
committer | H. Nikolaus Schaller <hns@goldelico.com> | 2012-03-26 20:55:28 +0200 |
commit | 92988a21ad4c4c9504295ccb580c9f806134471b (patch) | |
tree | 5effc9f14170112450de05c67dafbe8d5034d595 /u-boot/board/rpxsuper/readme | |
parent | ca2b506783b676c95762c54ea24dcfdaae1947c9 (diff) | |
download | bootable_bootloader_goldelico_gta04-92988a21ad4c4c9504295ccb580c9f806134471b.zip bootable_bootloader_goldelico_gta04-92988a21ad4c4c9504295ccb580c9f806134471b.tar.gz bootable_bootloader_goldelico_gta04-92988a21ad4c4c9504295ccb580c9f806134471b.tar.bz2 |
added boot script files to repository
Diffstat (limited to 'u-boot/board/rpxsuper/readme')
-rw-r--r-- | u-boot/board/rpxsuper/readme | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/u-boot/board/rpxsuper/readme b/u-boot/board/rpxsuper/readme new file mode 100644 index 0000000..21267bd --- /dev/null +++ b/u-boot/board/rpxsuper/readme @@ -0,0 +1,30 @@ +Hi, + +so this is the port to the Embedded Planet RPX Super Board. + +ATTENTION +This code is only tested on the AY-Version, which is an early release with some +hardware bugs. The main problem is that this board uses the default Hard Reset +Configuration Word and not the 4 bytes located at start of FLASH because at +0xFE000000 is no FLASH. The FLASH consists out of 4 chips each 16bits wide. Be +carefull, the bytes are swapped. So DQ0-7 is the high byte, DQ8-15 ist the low +byte. + +The icache can only manually be enabled after reset. +The FLASH and main SDRAM is working with icache enabled. +The local SDRAM can only be used as data memory when icache is enabled. +If U-Boot runs in local SDRAM, TFTP does not work. +The functions in mii_phy.c are all working. Call mii_phy_discover() out of +eth_init() and solve the linker error. +I2C, RTC/NVRAM and PCMCIA are not working yet. + +TODO +The 32MB local SDRAM is working but not shown in the startup messages of +U-Boot. If you locate U-Boot or any other program to this area it won't run. +Turning the ichache off does not solve this problem. + +As I won't buy another RPX Super there might be some little work to do for you +getting this U-Boot port running on the final board. + + +frank.morauf@salzbrenner.com |