diff options
| -rw-r--r-- | CHANGELOG | 6162 | ||||
| -rw-r--r-- | Makefile | 4 | ||||
| -rw-r--r-- | board/davinci/dm6467evm/dm6467evm.c | 1 | ||||
| -rw-r--r-- | board/ep8248/ep8248.c | 1 | ||||
| -rw-r--r-- | board/logicpd/imx27lite/Makefile | 1 | ||||
| -rw-r--r-- | cpu/arm926ejs/mx27/generic.c | 1 | ||||
| -rw-r--r-- | cpu/arm_cortexa8/start.S | 1 | ||||
| -rw-r--r-- | cpu/mpc85xx/fixed_ivor.S | 58 | ||||
| -rw-r--r-- | doc/README.bitbangMII | 18 | ||||
| -rw-r--r-- | doc/README.drivers.eth | 2 | ||||
| -rw-r--r-- | doc/README.kwbimage | 4 | ||||
| -rw-r--r-- | drivers/net/phy/miiphybb.c | 8 | ||||
| -rw-r--r-- | drivers/net/smc911x.c | 2 | ||||
| -rw-r--r-- | include/asm-arm/arch-davinci/gpio_defs.h | 1 | ||||
| -rw-r--r-- | include/configs/P1_P2_RDB.h | 1 | ||||
| -rw-r--r-- | include/configs/davinci_dm6467evm.h | 1 |
16 files changed, 6210 insertions, 56 deletions
@@ -1,3 +1,5422 @@ +commit 246c69225c7b962d5c93e92282b78ca9fc5fefee +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Sun Oct 25 15:12:56 2009 -0500 + + Add 'editenv' command + + The editenv command can be used to edit an environment variable. + Editing an environment variable is useful when one wants to tweak an + existing variable, for example fix a typo or change the baudrate in the + 'bootargs' environment variable. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit b0fa8e50632a628766db23f5c884ec63f1469552 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Sun Oct 25 15:12:55 2009 -0500 + + setenv(): Delete 0-length environment variables + + Previously setenv() would only delete an environment variable if it + was passed a NULL string pointer as a value. It should also delete an + environment variable when it encounters a valid string pointer of + 0-length. + + This change/fix is generally useful and is necessary for the upcoming + "editenv" command. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit ecc5500ee487170d8af6ff893fd1e0082380a01a +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Sun Oct 25 15:12:54 2009 -0500 + + readline(): Add ability to modify a string buffer + + If the 'buf' parameter is a non-0-length string, its contents will be + edited. Previously, the initial contents of 'buf' were ignored and the + user entered its contents from scratch. + + This change is necessary to support the upcoming "editenv" command but + could also be used for future commands which require a user to modify + an existing string. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit f923943843cd617d681387e7fe81a48060cc6401 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Sun Oct 25 15:12:53 2009 -0500 + + cread_line(): Remove unused variables + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit e491a71e578e93bd3b2f8f20d8ef8f111c98010d +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Sun Oct 25 15:12:52 2009 -0500 + + Check for NULL prompt in readline_into_buffer() + + Previously, passing readline() or readline_into_buffer() a NULL 'prompt' + parameter would result in puts() printing garbage when + CONFIG_CMDLINE_EDITING was enabled. + + Note that no board currently triggers this bug. Enabling + CONFIG_CMDLINE_EDITING on some boards (eg bab7xx) would result in + the bug appearing. This change is only intended to prevent someone + from running into this issue in the future. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 16d1c10783660f3fdbc3c19141f42f3b0d1834d3 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Oct 25 23:00:09 2009 +0100 + + drivers/net/phy/miiphybb.c: fix warning: no newline at end of file + + Add missing newline. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Luigi Mantellini <luigi.mantellini@idf-hit.com> + Cc: Ben Warren <biggerbadderben@gmail.com> + +commit a747a7f31059b9069e97c78bba5496409c33aa05 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Oct 27 00:03:32 2009 +0100 + + Revert "env: only build env_embedded and envcrc when needed" + + Breaks building on many boards, and no really clean fix available yet. + + This reverts commit 6dab6add2d8ee80905234b326abc3de11be1d178. + +commit 3fca80375981fe83d4674a0267183b469a1ea7ff +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 15 17:47:16 2009 +0400 + + mpc85xx: Configure QE USB for MPC8569E-MDS boards + + Setup QE pin multiplexing for USB function, configure needed BCSRs + and add some fdt fixups. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 14809b6c21c89dd65abaf3fea7627fb5ea0f78a3 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 15 17:47:13 2009 +0400 + + mpc85xx: Configure QE UART for MPC8569E-MDS boards + + To make QE UART usable by Linux we should setup pin multiplexing + and turn UCC2 Ethernet node into UCC2 QE UART node. + + Also, QE UART is mutually exclusive with UART0, so we can't enable + it if eSDHC is in 4-bits mode on pilot boards, or if it's a prototype + board with eSDHC in 1- or 4-bits mode. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 70d665b1d230b9575a647948e8db3da1e6743e5c +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 15 17:47:11 2009 +0400 + + mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards + + SPI Flash (M25P40) is connected to the SPI1 bus, we need a few + qe_iop entries to actually enable SPI1 on these boards. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 65dec3b4599a17e83ec69dfd059e4ea1e795ef37 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 15 17:47:09 2009 +0400 + + mpc85xx: Setup SRIO memory region LAW for MPC8569E-MDS boards + + This patch sets memory window for Serial RapidIO on MPC8569E-MDS + boards. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a29155e12286cc5ec2df72c1cab28e3659bfdad5 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 15 17:47:08 2009 +0400 + + mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards + + Simply add some defines, and adjust TLBe setup to include some + space for eLBC NAND. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7f52ed5ef1b490da282ace3316be381a6abf96a5 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 15 17:47:06 2009 +0400 + + mpc85xx: Add eSDHC support for MPC8569E-MDS boards + + eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2 + (in 1-bit mode). When eSDHC is used, we should switch u-boot console to + UART1, and make the proper device-tree fixups. + + Because of an erratum in prototype boards it is impossible to use eSDHC + without disabling UART0 (which makes it quite easy to 'brick' the board + by simply issung 'setenv hwconfig esdhc', and not able to interact with + U-Boot anylonger). + + So, but default we assume that the board is a prototype, which is a most + safe assumption. There is no way to determine board revision from a + register, so we use hwconfig. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 48618126f78f05042dae428811809b594f747eb9 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Oct 23 15:55:48 2009 -0500 + + xpedite5370: Enable multi-core support + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Oct 23 15:55:47 2009 -0500 + + 85xx: MP Boot Page Translation update + + This change has 3 goals: + - Have secondary cores be released into spin loops at their 'true' + address in SDRAM. Previously, secondary cores were put into spin + loops in the 0xfffffxxx address range which required that boot page + translation was always enabled while cores were in their spin loops. + + - Allow the TLB window that the primary core uses to access the + secondary cores boot page to be placed at any address. Previously, a + TLB window at 0xfffff000 was always used to access the seconary cores' + boot page. This TLB address requirement overlapped with other + peripherals on some boards (eg XPedite5370). By default, the boot + page TLB will still use the 0xfffffxxx address range, but this can be + overridden on a board-by-board basis by defining a custom + CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page + remains in use while U-Boot executes. Previously it was only + temporarily used, then restored to its initial value. + + - Allow Boot Page Translation to be disabled on bootup. Previously, + Boot Page Translation was always left enabled after secondary cores + were brought out of reset. This caused the 0xfffffxxx address range + to somewhat "magically" be translated to an address in SDRAM. Some + boards may not want this oddity in their memory map, so defining + CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after + the secondary cores are initialized. + + These changes are only applicable to 85xx boards with CONFIG_MP defined. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc +Author: Vivek Mahajan <vivek.mahajan@freescale.com> +Date: Tue Oct 27 12:18:55 2009 +0530 + + ppc/85xx/pci: fsl_pci_init: pcie agent mode support + + Originally written by Jason Jin and Mingkai Hu for mpc8536. + + When QorIQ based board is configured as a PCIe agent, then unlock/enable + inbound PCI configuration cycles and init a 4K inbound memory window; + so that a PCIe host can access the PCIe agents SDRAM at address 0x0 + + * Supported in fsl_pci_init_port() after adding pcie_ep as a param + * Revamped copyright in drivers/pci/fsl_pci_init.c + * Mods in 85xx based board specific pci init after this change + + Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 273a28ad9ef59dcfcd4c056ec1f61f1e0896cfaa +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Tue Oct 27 09:36:38 2009 +0530 + + 85xx/p1_p2_rdb: Fixing DDR configuration for 800MHz data rate + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 924024c396761c267b948f38d78e9905f2036501 +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Tue Oct 27 09:26:55 2009 +0530 + + 85xx/p1_p2rdb: Fix crash while configuring 32 bit DDR i/f for P1020RDB. + + The data being modified was in NOR flash which caused the crash. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3e303f748cf57fb23e8ec95ab7eac0074be50e2b +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Thu Oct 15 17:47:04 2009 +0400 + + fdt_support: Add multi-serial support for stdout fixup + + Currently fdt_fixup_stdout() is using hard-coded CONFIG_CONS_INDEX + constant. With multi-serial support, the CONS_INDEX may no longer + represent actual console, so we should try to extract port number + from the current stdio device name instead of always hard-coding the + constant value. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit da0e5f7ee828f246d85997486fff308837069453 +Author: Leon Woestenberg <leon.woestenberg@gmail.com> +Date: Mon Oct 26 10:03:32 2009 +0100 + + ppc/85xx: Fix crashes due to generation of SPE instruction + + U-Boot crashed on the last instruction: + + int parse_stream_outer(struct in_str *inp, int flag) + { + effa4784: 94 21 ff 38 stwu r1,-200(r1) + effa4788: 7c 08 02 a6 mflr r0 + effa478c: 42 9f 00 05 bcl- 20,4*cr7+so,effa4790 <parse_stream_outer+0xc> + effa4790: 7d 80 00 26 mfcr r12 + effa4794: 13 c1 b3 21 evstdd r30,176(r1) + + ...which is a SPE instruction, although -mno-spe was used. + + tmp/cross/ppce500v2/bin/powerpc-angstrom-linux-gnuspe-gcc --version + powerpc-angstrom-linux-gnuspe-gcc (GCC) 4.3.3 + + Seems to be a known issue (since 2008-04?!) + + Googled some, turns out this patch/workaround works for me on MPC8536DS. + + See http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html for more info + + Signed-off-by: Leon Woestenberg <leon@sidebranch.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 654ea1f3184235694306ddc5874baa27ad3018fe +Author: Dave Liu <daveliu@freescale.com> +Date: Thu Oct 22 00:10:23 2009 -0500 + + ppc/85xx: Make L2 support more robust + + According the user manual, we need loop-check the L2 enable bit set. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 613ad28c3da4c7fc6336ef9d94993b25a5d0586e +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Oct 26 21:21:25 2009 -0500 + + ppc/85xx: Fix compiler warning in nand_spl/.../p1_p2_rdb/nand_boot.c + + nand_boot.c: In function 'board_init_f': + nand_boot.c:44: warning: 'sys_clk' may be used uninitialized in this function + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit e8967d96a0e8d09d91a3b7bd292746996dd8e7ac +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Oct 26 21:18:33 2009 -0500 + + ppc/85xx: Fix building NAND_SPL out of tree + + We need to source files to exist in the O=<FOO> nand_spl dir when + we build out of tree. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f3ee25859e3920ee7c7cc519a3e6f60d70d7a53f +Author: Matthias Fuchs <matthias.fuchs@esd.eu> +Date: Fri Oct 23 10:52:38 2009 +0200 + + License cleanup: Fix license header for some esd display configurations + + These files were autogenerated by EPSON configuration tools. + This patch replaces the autogenerated file headers by the GPL + license notice. + + This change is done with the explicit permission + of Epson Research & Development / IC Software Development. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> + +commit 4166ee58d30ada7b298b9c941067f0341c2dccbe +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Oct 9 17:12:44 2009 -0400 + + sf: add GPL-2 license info + + Some of the new spi flash files were missing explicit license lines. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit d535a493004fb701f131b132402a7704f9c9342d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Oct 21 23:29:51 2009 -0500 + + fdt: Fix fdt padding issue for initrd mem_rsv + + Its possible that we end up with a device tree that happens to be a + particular size that after we call fdt_resize() we don't have any + space left for the initrd mem_rsv. + + Fix this be adding a second mem_rsv into the size calculation. We + had one to cover the fdt itself and we have the potential of adding + a second for the initrd. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 4bc3d2afb380e78fdbb9c501d9a8da6d59eb178e +Author: Steve Sakoman <sakoman@gmail.com> +Date: Tue Oct 20 18:21:18 2009 +0200 + + ARM: OMAP3: Refactors the SM911x driver + + Move the test up in the function to not hang on systems without ethernet. + + Signed-off-by: Steve Sakoman <sakoman@gmail.com> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit f3807374787e4394efb767e2e8527887f57e51b8 +Author: Minkyu Kang <mk7.kang@samsung.com> +Date: Thu Oct 15 11:19:15 2009 +0900 + + s5pc1xx: SMDKC100: fix compile warnings + + fix the following compile warnings + warning: dereferencing type-punned pointer will break strict-aliasing rules + + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + +commit 8003c361deec3ee651451662efd05352f1abdd40 +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Tue Oct 6 08:44:22 2009 +0200 + + arm926ejs: 8-byte align stack to avoid LDRD/STRD problems + + U-boot for Marvell Kirkwood boards no longer work after the EABI changes + introduced in commit f772acf8a584067033eff1e231fcd1fb3a00d3d9. This + turns out to be caused by a stack alignment issue. The armv5te + instructions ldrd/strd instructions require 8-byte alignment to work + properly (otherwise undefined behavior). + + Tested on an OpenRD base board, where both printouts and ubifs stuff now + works. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + +commit e63e5904b48528f3f3cc98317df6fc62fab25bf9 +Author: Tom Rix <Tom.Rix@windriver.com> +Date: Sat Oct 17 12:41:06 2009 -0500 + + TI OMAP3 SDP3430: Initial Support + + Start of support of + Texas Instruments Software Development Platform(SDP) + for OMAP3430 - SDP3430 + + Highlights of this platform are: + Flash Memory devices: + Sibley NOR, Micron 8bit NAND and OneNAND + Connectivity: + 3 UARTs and expanded 4 UART ports + IrDA + Ethernet, USB + Other peripherals: + TWL5030 PMIC+Audio+Keypad + VGA display + Expansion ports: + Memory devices plugin boards (PISMO) + Connectivity board for GPS,WLAN etc. + Completely configurable boot sequence and device mapping + etc. + + Support default jumpering and: + - UART1/ttyS0 console(legacy sdp3430 u-boot) + - UART3/ttyS2 console (matching other boards, + and SDP HW docs) + - Ethernet + - mmc0 + - NOR boot + + Currently the UART1 is enabled by default. for + compatibility with other OMAP3 u-boot platforms, + enable the #define of CONSOLE_J9. + + Conflicts: + + Makefile + + Fixed the conflict with smdkc100_config by moving omap_sdp3430_config + to it is alphabetically sorted location above zoom1. + + Signed-off-by: David Brownell <david-b@pacbell.net> + Signed-off-by: Nishanth Menon <nm@ti.com> + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + +commit a4474ff8629be5f28aefb8a9f48d4411d62fb0d2 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Oct 13 19:35:11 2009 -0400 + + TI DaVinci: Adding Copyright for DM365 EVM + + Forgot to add Copyright while submitting the patch. + This patch adds the copyright. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 11b0102218bbb50ac5c04f1521f2a22ed4e90cf1 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Oct 13 12:32:32 2009 -0400 + + TI DaVinci: Fix DM6467 EVM Compilation Warning + + Due to new TI boards being added to U-Boot, the hardware.h + is getting very messy. The warning being fixed is due to + the EMIF addresses being redefined. + + The long term solution(after 2009.11) to this is to + have SOC specific header files. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit fac1ef4ba685606bf28349d18e050ea08b50e669 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Oct 13 12:01:52 2009 -0400 + + TI DaVinci: DM355 Leopard: Fix compilation warning + + We get a compliation warning when we enable the NAND driver + for DM355 leopard. The waring we get is that we have + an implicit declaration of davinci_nand_init. + + It is fixed by including the asm/arch/nand_defs.h header file + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit f8a812aa656bc34622303a26fa5003d19c34aeed +Author: Nishanth Menon <nm@ti.com> +Date: Tue Oct 13 12:49:55 2009 -0400 + + TI OMAP3: make gpmc_config as const + + gpmc_config should not be a variant as it is board specific + hence make it a const parameter + + Fixes issues identified by Dirk: + - build issue for zoom2 + - warnings for all other OMAP3 platforms using nand/onenand etc + + Signed-off-by: Nishanth Menon <nm@ti.com> + +commit cfc25874624a328f53ad59b1206e2103f2e62d74 +Author: Stefan Roese <sr@denx.de> +Date: Mon Oct 19 16:19:36 2009 +0200 + + ppc4xx: Sequoia: Add chip_config command + + This patch removes the Sequoia "bootstrap" command and replaces it + with the now common command "chip_config". + + Please note that the patches with the dynamic PCI sync clock + configuration have to be applied, before this one should go in. + This is because Sequoia has 2 different bootstrap EEPROMs, and + the old bootstrap command configured different values depending + on the detected PCI async clock (33 vs. 66MHz). With the PCI sync + clock patches, this is not necessary anymore. The PCI sync clock + will be configured correctly on-the-fly now. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c85b58397030e25e146ccf5085c86221c40c53b3 +Author: Stefan Roese <sr@denx.de> +Date: Mon Oct 19 14:14:08 2009 +0200 + + ppc4xx: Yosemite/Yellowstone: Check and reconfigure the PCI sync clock + + This patch now uses the 440EP(x)/GR(x) function to check and dynamically + reconfigure the PCI sync clock. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 23c51a2d6393cd3be9eb62cb42d92138ff6db8a9 +Author: Stefan Roese <sr@denx.de> +Date: Mon Oct 19 14:10:50 2009 +0200 + + ppc4xx: Sequoia/Rainer: Check and reconfigure the PCI sync clock + + This patch now uses the 440EP(x)/GR(x) function to check and dynamically + reconfigure the PCI sync clock. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 08c6a2628478ace808b3767db17e4148cac5a7fb +Author: Stefan Roese <sr@denx.de> +Date: Mon Oct 19 14:44:11 2009 +0200 + + ppc4xx: Print PCI synchronous clock frequency upon bootup + + Some 4xx variants (e.g. 440EP(x)/GR(x)) have an internal + synchronous PCI clock. Knowledge about the currently configured + value might be helpful. So let's print it out upon bootup. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5e47f9535f53fd4cc05f32fb6166870f976fbb4e +Author: Stefan Roese <sr@denx.de> +Date: Mon Oct 19 14:06:23 2009 +0200 + + ppc4xx: Add function to check and dynamically change PCI sync clock + + PPC440EP(x)/PPC440GR(x): + In asynchronous PCI mode, the synchronous PCI clock must meet + certain requirements. The following equation describes the + relationship that must be maintained between the asynchronous PCI + clock and synchronous PCI clock. Select an appropriate PCI:PLB + ratio to maintain the relationship: + + AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz + + This patch now adds a function to check and reconfigure the sync + PCI clock to meet this requirement. This is in preparation for + some AMCC boards (Sequoia/Rainier and Yosemite/Yellowstone) using this + function to not violate the PCI clocking rules. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 92b8964bed0d1b779d9e26be4e16755b5c635415 +Author: Stefan Roese <sr@denx.de> +Date: Fri Oct 16 10:01:09 2009 +0200 + + ppc4xx: Update flash size in reg property of the NOR flash node + + Till now only the ranges in the ebc node are updated with the values + currently configured in the PPC4xx EBC controller. With this patch now + the NOR flash size is updated in the device tree blob as well. This is + done by scanning the compatible nodes "cfi-flash" and "jedec-flash" + for the correct chip select number. + + This size fixup is enabled for all AMCC eval board right now. Other + 4xx boards may want to enable it as well, if this problem with multiple + NOR FLASH sizes exists. + + Signed-off-by: Stefan Roese <sr@denx.de> + Cc: Wolfgang Denk <wd@denx.de> + +commit 30d45c0d3ea2231f9131276ea113595959a0720e +Author: Stefan Roese <sr@denx.de> +Date: Wed Oct 21 11:59:52 2009 +0200 + + fdt: Add fdt_fixup_nor_flash_size() to fixup NOR FLASH size in dtb + + This function can be used to update the size in the "reg" property + of the NOR FLASH device nodes. This is necessary for boards with + non-fixed NOR FLASH sizes. + + Signed-off-by: Stefan Roese <sr@denx.de> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + Acked-by: Wolfgang Denk <wd@denx.de> + +commit 76706cb86b1c76954ff5353db6757ab99cfd95fb +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Oct 20 23:12:13 2009 +0200 + + cpu/ppc4xx/fdt.c: avoid strcpy() to constant string + + strcpy() was iused with the target address being a pointer to a + constant string, which potentially is read-only. Use a (writable) + array of characters instead. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0e1ac981194aa0d92eff0934442cec48a4f57834 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Oct 20 23:07:04 2009 +0200 + + cpu/ppc4xx/fdt.c: avoid strcpy() to constant string + + strcpy() was iused with the target address being a pointer to a + constant string, which potentially is read-only. Use a (writable) + array of characters instead. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit c55096c084308c08bf8891c190f90bdc3a232394 +Author: Daniel Mack <daniel@caiaq.de> +Date: Wed Apr 8 13:23:38 2009 +0200 + + smc911x: add support for LAN9220 + + Signed-off-by: Daniel Mack <daniel@caiaq.de> + Cc: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit f67066b6b0740b826ed862615c5ab022aaf4779a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Oct 18 20:43:14 2009 -0400 + + envcrc: check return value of fwrite() + + Newer toolchains will often complain about unchecked fwrite(): + envcrc.c:117: warning: ignoring return value of `fwrite´, declared + with attribute warn_unused_result + + So check the return value to silence the warnings. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit efd988ebaa241bab265b1511052350207cb7aaa0 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Oct 19 09:18:57 2009 +0200 + + mcc200: fix build error + + Fix compile error: + include/configs/mcc200.h:401:6: error: #elif with no expression + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 4e0539d2696992a5e32643a0c831e870cfe9a036 +Author: Nishanth Menon <nm@ti.com> +Date: Tue Oct 13 12:47:39 2009 -0400 + + OMAP3: fix warnings when NAND/ONENAND is not used + + Fix build warnings by putting specific used variables + under required #ifdefs for removing: + mem.c:227: warning: unused variable 'f_sec' + mem.c:226: warning: unused variable 'f_off' + mem.c:225: warning: unused variable 'size' + mem.c:224: warning: unused variable 'base' + mem.c:222: warning: unused variable 'gpmc_config' + + Signed-off-by: Nishanth Menon <nm@ti.com> + +commit 73db0c71da365a2d101878ae3aeb8ff3545a1828 +Author: Nishanth Menon <nm@ti.com> +Date: Tue Oct 13 12:47:24 2009 -0400 + + OMAP3: export enable_gpmc_cs_config to board files + + Export enable_gpmc_cs_config into common header to + prevent warning: + + warning: implicit declaration of function 'enable_gpmc_cs_config' + + Signed-off-by: Nishanth Menon <nm@ti.com> + +commit 96a27c6dc29abf11740632ecd8ccab607b209c5d +Author: Tom Rix <Tom.Rix@windriver.com> +Date: Mon Oct 12 12:07:40 2009 -0400 + + Zoom2 Fix serial gpmc setup + + The offset to the chip select is incorrect. + + The change 187af954cf7958c24efcf0fd62289bbdb4f1f24e, + + omap3: embedd gpmc_cs into gpmc config struct + + introduced a problem with the serial gpmc setup. + + This patch reverts the chip select to its previous value. + + The symptoms of this problem are that the Zoom2 + currently hangs. + + This was run tested on Zoom2. + + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + +commit 64d945abe8cffbacdaeca5f63b9b84f895d2d9ab +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sun Oct 11 09:10:27 2009 -0400 + + TI DaVinci Sonata: Add Config option for 64 bit Support + + Adding the CONFIG_SYS_64BIT_VSPRINTF fot the DM644x based Sonata + Without this option enabled while performing NAND operations we will get + wrong diagnostic messages. + Example if the MTD NAND driver find a bad block while erasing from + a certain address, it will say bad block skipped at 0x00000000. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 54aa603d2ce1d9374a1f5c6336362037ad2d8b51 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sun Oct 11 09:14:58 2009 -0400 + + TI DaVinci DVEVM: Add Config option for 64 bit Support + + Adding the CONFIG_SYS_64BIT_VSPRINTF in the DVEVM config. + Without this option enabled while performing NAND operations we will get + wrong diagnostic messages. + Example if the MTD NAND driver find a bad block while erasing from + a certain address, it will say bad block skipped at 0x00000000. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit b8d0aa0c78b8c0fa51acada3c486b81085924b53 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sat Oct 10 10:19:20 2009 -0400 + + TI DaVinci DM365: Add Config option for 64 bit Support + + Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM365 EVM config. + Without this option enabled while performing NAND operations we will get + wrong diagnostic messages. + Example if the MTD NAND driver find a bad block while erasing from + a certain address, it will say bad block skipped at 0x00000000. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 86a725b9c8b829c217be90e590f3ca2c91fa1dca +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sat Oct 10 10:18:46 2009 -0400 + + TI DaVinci DM355: Add Config option for 64 bit Support + + Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM355 EVM config. + Without this option enabled while performing NAND operations we will get + wrong diagnostic messages. + Example if the MTD NAND driver find a bad block while erasing from + a certain address, it will say bad block skipped at 0x00000000. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 9c44ddccb6602f620fc037974f3e4468ad8a7c0c +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Wed Sep 9 11:50:40 2009 -0400 + + TI: OMAP3: Remove SZ_xx references + + This patch removes dependency on the sizes.h header file + and removes all references to SZ_xx. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 13d2cb988ff07addce6e10ab2cb8965a9dd23c63 +Author: Steve Sakoman <sakoman@gmail.com> +Date: Sat Oct 10 14:29:37 2009 -0400 + + OMAP3: Update Overo and Beagle environment + + Update default environment to support new kernel DSS2 subsystem and + simplify rootfs type and location changes. + + Signed-off-by: Steve Sakoman <sakoman@gmail.com> + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit c73607c5525c6957c815e64f7e865fdd3baffe98 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sat Oct 10 13:46:26 2009 -0400 + + TI DaVinci: Maintainer for DM355 and DM365 EVM + + Adding entries to the MAINTAINERS directory for the + DM355 and DM365 EVM. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 5df65cf56aeef9fdeab83a259c37aa7d23836dd3 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sat Oct 10 13:37:10 2009 -0400 + + TI: DaVinci: DM355 Leopard board support + + This patch adds support for the leopard board which is + based on the DM355 SOC. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 6ab176d7091d21960a1bd89fcb7fd87b9e91aca1 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sat Oct 10 12:00:47 2009 -0400 + + TI DaVinci DM646x: Adding initial support for DM6467 EVM + + This patch adds the initial support for DM6467 EVM. + Other features like NET and NAND support will be added as follow up patches. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit d884f64a7b8482f6c9688600e0a4731fa5678e0c +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Thu Oct 1 20:22:09 2009 -0400 + + TI DaVinci DM365: Fix Compilation warning for DM365 EVM + + This patch fixes a compilation warning while compiling + the DM365 EVM. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 6fe5e87be4b944edf428835210056e020c8bb794 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Thu Oct 1 20:21:13 2009 -0400 + + TI DaVinci DM355: Fix Compilation warning for DM355 EVM + + This patch fixes a compilation warning while compiling + the DM355 EVM. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 513bbe1b1720682e6de0aba2d9db5e60f3a428bb +Author: Eric Benard <eric@eukrea.com> +Date: Mon Oct 12 10:15:39 2009 +0200 + + AT91 CPUAT91 Fix compiler warning + + This change fixes the compiler warning + + main.c: In function 'abortboot': + main.c:122: warning: too few arguments for format + + Signed-off-by: Eric Benard <eric@eukrea.com> + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + +commit b1e81f701d044eee3884202b127d5d1f0668bdb9 +Author: Eric Benard <eric@eukrea.com> +Date: Mon Oct 12 10:15:40 2009 +0200 + + AT91 CPU9260 CPU9G20 Fix compile warnings + + This change fixes the compiler warning + + nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF + for correct output! + + Signed-off-by: Eric Benard <eric@eukrea.com> + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + +commit 94d50c527a3cedb6a41fbe6773256cdd1855317f +Author: Eric Benard <eric@eukrea.com> +Date: Mon Oct 12 10:08:20 2009 +0200 + + AT91 CPU9260 Fix machine ID when using a CPU9G20. + + Signed-off-by: Eric Benard <eric@eukrea.com> + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + +commit 8c0a92c8f4cf399e873c2611939f3617983785a9 +Author: Alessandro Rubini <rubini@unipv.it> +Date: Sat Oct 10 11:51:26 2009 +0200 + + lcd: remove '#if 0' 32-bit scroll, now memcpy does it + + Signed-off-by: Alessandro Rubini <rubini@unipv.it> + Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> + +commit e3ea948d4588e7efddbf0ee92147d93f827d7cea +Author: Alessandro Rubini <rubini@unipv.it> +Date: Sat Oct 10 11:51:16 2009 +0200 + + lib_generic memset: fill one word at a time if possible + + If the destination is aligned, fill ulong values until possible. + Then fill remaining part by byte. + + Signed-off-by: Alessandro Rubini <rubini@unipv.it> + Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> + Acked-by: Mike Frysinger <vapier@gentoo.org> + +commit ecd830b863e5c6ac5d804d3b3a92453a98d526fc +Author: Alessandro Rubini <rubini@unipv.it> +Date: Sat Oct 10 11:51:05 2009 +0200 + + lib_generic memcpy: copy one word at a time if possible + + If source and destination are aligned, this copies ulong values + until possible, trailing part is copied by byte. Thanks for the details + to Wolfgang Denk, Mike Frysinger, Peter Tyser, Chris Moore. + + Signed-off-by: Alessandro Rubini <rubini@unipv.it> + Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> + Acked-by: Mike Frysinger <vapier@gentoo.org> + +commit 9c5586aa19bbedf290d2a663813404d2db87dfa5 +Author: Alessandro Rubini <rubini@unipv.it> +Date: Thu Oct 8 14:29:14 2009 +0200 + + setenv: do console redirection even if previously unset + + If "stdout" is not previously set, doing "setenv stdout lcd" had no + effect, since console redirection only worked if the environment + variable was already set; the second time you run setenv it worked. + Most default environments lack stdin/out/err definitions, so I'm sure + I'm not alone with this problem. + + This patch simply moves a block of code out of a conditional, to do + the same work even if the variable was previously unset. + + Signed-off-by: Alessandro Rubini <rubini@unipv.it> + Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> + +commit c9ee39972a7758e883b73c6c0e3c3a14cd5b2f43 +Author: Martha Stan <mmarx@silicontkx.com> +Date: Wed Oct 7 04:38:46 2009 -0400 + + mpc512x: fix System Clock Control constants for USB1 & USB2 + + Signer-off-by: Martha Stan <mmarx@silicontkx.com> + +commit 87b22b7787f397fc3daad570d711e478b1a7d253 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Oct 2 18:18:33 2009 -0400 + + mem_mtest: fix error reporting, allow escape with ^C + + The basic memtest function tries to watch for ^C after each + pattern pass as an escape mechanism, but if things are horribly + wrong, we'll be stuck in an inner loop flooding the console with + error messages and never check for ^C. To make matters worse, + if the user waits for all the error messages to complete, we + then incorrectly report the test passed without errors. + + Adding a check for ^C after any error is printed will give + the end user an escape mechanism from a console flood without + slowing down the overall test speed on a slow processor. + + Also, the more extensive memtest quit after just a single error, + which is inconsistent with the normal memtest, and not useful if + if you are doing dynamic environmental impact testing, such as + heating/cooling etc. + + Both tests now track the error count and report it properly + at test completion. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Acked-by: Mike Frysinger <vapier@gentoo.org> + +commit 9f4a420663419dc13f08a0ce65b93033c6172c69 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Oct 1 12:11:54 2009 -0400 + + new default shortcut to config & build a board + + The majority of the time that I build things in U-Boot, I want to just + build for the board. I don't make board config tweaks after selecting the + board. So add a new pattern rule that allows people to combine two steps + in one go: + `make foo_config && make` => `make foo` + + This shouldn't conflict with any existing make rules as the pattern rule + is used only the rule doesn't already exist. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 6dab6add2d8ee80905234b326abc3de11be1d178 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Sep 30 15:29:58 2009 -0400 + + env: only build env_embedded and envcrc when needed + + The env code is protected by the ENV_IS_EMBEDDED define, so attempting to + compile the code when this isn't defined is pointless. Now that the env + headers have unified around CONFIG_ENV_IS_EMBEDDED, convert the build + system to only build the env objects when this is enabled. And now that + the env code is conditionally compiled, we can drop the source code checks. + + For people who want to extract the environment manually, add a new option + CONFIG_BUILD_ENVCRC that only enables the envcrc utility. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 78f4ca7976748159080c9d920d5eb542d1b32d4f +Author: Daniel Mack <daniel@caiaq.de> +Date: Mon Sep 28 11:40:38 2009 +0200 + + part_dos: check status flags of partitions + + Only read partitions which have 0x00 or 0x80 set in their status field. + All others are invalid. + + Signed-off-by: Daniel Mack <daniel@caiaq.de> + +commit 45def0ab9d1dedcd2a73939aad8373f760498762 +Author: Eric Millbrandt <emillbrandt@coldhaus.com> +Date: Fri Sep 25 17:47:43 2009 -0500 + + galaxy5200: change cs1 configuration + + Correct the chip select configuration for the nand flash chip select. + + Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> + +commit 7936b51165b519a16ecf3db302fb88df8b8b3b3d +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Wed Sep 23 08:12:14 2009 +0200 + + Cleanup: use constant + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 7120c888101952b7e61b9e54bb42370904aa0e68 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Mon Oct 12 11:06:19 2009 -0500 + + mpc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number swappage) + + mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1 + h/w (see AN3545). The base device tree in use has rev. 1 ID numbers, + so if on Rev. 2 (and higher) h/w, we fix them up here. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Reviewed-by: Roland Lezuo <roland.lezuo@chello.at> + +commit 91525c67153fcf2c19b2fc8d9c6376ac1a019f52 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Oct 12 23:55:39 2009 +0400 + + mpc85xx: Fix booting on various boards + + commit 0e870980a64584a591af775bb9c9fe9450124df9 ("8xxx: Removed + CONFIG_NUM_CPUS from 85xx/86xx") breaks U-Boot on various boards, + namely the ones that call get_sys_info() from board_early_init_f(). + + get_sys_info() calls cpu_numcores(), which depends on probecpu() + being called before. But probecpu() is called after board_early_init_f(), + and so cpu_numcores() returns random values, which in turn crashes + get_sys_info(). + + To fix the issue we place probecpu() before board_early_init_f() + in an initialization sequence. + + Booting on the following boards should be revived now: + mpc8540ads + mpc8541cds + mpc8548cds + mpc8555cds + mpc8560ads + mpc8568mds + mpc8569mds + and maybe more. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 26df6aa9916443077139f8f008fbc5f414ba05e5 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Oct 2 18:48:07 2009 -0400 + + mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define + + This is an orphaned legacy leftover that is just polluting + the config file namespace. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit fad15096e3b34927444ba5f6133742d40d78a425 +Author: Dipen Dudhat <dipen.dudhat@freescale.com> +Date: Thu Oct 8 13:33:29 2009 +0530 + + ppc/P1_P2_RDB: On-chip BootROM support + + On Chip BootROM support for P1 and P2 series RDB platforms. + + This patch is derived from latest On Chip BootROM support on MPC8536DS + + Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f7780ec977e545b83bc5068e0957d640f1d98f13 +Author: Dipen Dudhat <dipen.dudhat@freescale.com> +Date: Thu Oct 8 13:33:18 2009 +0530 + + ppc/P1_P2_RDB: NAND Boot Support + + NAND Boot support for P1 and P2 series RDB platforms. + + This patch is derived from NAND Boot support on MPC8536DS. + + Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit d11823ca3cb551814ffcd926402c8bcf3a7eff35 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Wed Oct 7 16:34:28 2009 -0400 + + mpc8xxx: improve LAW error messages when setting up DDR + + When setting up the LAWs for the DDR, if there was an error, + you got the not-so-helpful error text "ERROR" and nothing + else. Not only is it non-informative, but it is also + pretty frustrating trying to grep for "ERROR" in the source. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a9946e3fc7089ddc6b7711a44e07a6b0827b79a7 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Wed Sep 30 16:12:31 2009 -0400 + + sbc8641d: fix LAW so board doesn't hang on DDR init + + All versions between now and since this commit: + + commit bd76729bcbfd64b5d016a9b936f058931fc06eaf + MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default + + will fail to allow the SBC8641D to get past DDR init, because the + LAW config was overlapping. Eventually this board will do SPD + EEPROM config, but for now this gets the board working again. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3d1988ab47cc0e265272967e07d747ec600a44c9 +Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk> +Date: Sat Oct 10 13:34:09 2009 +0900 + + Clean-up of s3c24x0 nand driver + + This patch re-formats the arm920t s3c24x0 nand driver in preparation for changes + to add support for the Embest SBC2440-II Board. + + The changes are as follows: + - re-indent the code using Lindent + - make sure register layouts are defined using a C struct + - replace the upper-case typedef'ed C struct names with lower case + non-typedef'ed ones + - make sure registers are accessed using the proper accessor functions + - run checkpatch.pl and fix any error reports + + It assumes the following patch has been applied first: + - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009 + - patches 1/4, 2/4 and 3/4 of this series + + Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have + any s3c2400 or s3c2410 boards but need this patch applying before I can submit + patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400, + smdk2410 and trab configs to use the mtd nand driver (which isn't used by any + board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or + errors were found. + + Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + +commit eb0ae7f549b7142826a8bcdd2dc945fac9c36349 +Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk> +Date: Sat Oct 10 13:33:11 2009 +0900 + + Clean-up of s3c24x0 drivers excluding nand driver + + This patch re-formats the arm920t s3c24x0 driver files, excluding the nand + driver, in preparation for changes to add support for the Embest SBC2440-II Board. + + The changes are as follows: + - re-indent the code using Lindent + - make sure register layouts are defined using a C struct + - replace the upper-case typedef'ed C struct names with lower case + non-typedef'ed ones + - make sure registers are accessed using the proper accessor functions + - run checkpatch.pl and fix any error reports + + It assumes the following patch has been applied first: + - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009 + - patches 1/4 and 2/4 of this series + + Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have + any s3c2400 or s3c2410 boards but need this patch applying before I can submit + patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400, + smdk2410 and trab configs to use the mtd nand driver (which isn't used by any + board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or + errors were found. + + Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + +commit 8250d0bae84229abea397f6b474b3556b0f04e80 +Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk> +Date: Sat Oct 10 13:32:01 2009 +0900 + + Clean-up of s3c24x0 header files + + This patch re-formats the arm920t s3c24x0 header files in preparation for + changes to add support for the Embest SBC2440-II Board. + + The changes are as follows: + - re-indent the code using Lindent + - make sure register layouts are defined using a C struct + - replace the upper-case typedef'ed C struct names with lower case + non-typedef'ed ones + - make sure registers are accessed using the proper accessor functions + - run checkpatch.pl and fix any error reports + + It assumes the following patch has been applied first: + - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009 + - patch 1/4 of this series + + Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have + any s3c2400 or s3c2410 boards but need this patch applying before I can submit + patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400, + smdk2410 and trab configs to use the mtd nand driver (which isn't used by any + board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or + errors were found. + + Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + +commit d67cce2dda3a40c3bd90a6c6e129fbb26dd4cfab +Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk> +Date: Sat Oct 10 13:30:22 2009 +0900 + + Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code + + This patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in + preparation for changes to add support for the Embest SBC2440-II Board. + + The changes are as follows: + - re-indent the code using Lindent + - make sure register layouts are defined using a C struct + - replace the upper-case typedef'ed C struct names with lower case + non-typedef'ed ones + - make sure registers are accessed using the proper accessor functions + - run checkpatch.pl and fix any error reports + + It assumes the following patch has been applied first: + - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009 + + Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have + any s3c2400 or s3c2410 boards but need this patch applying before I can submit + patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no + new warnings or errors were found. + + Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + +commit cd85662b345c0c2248fd7637f65bb2fbb4d53dd9 +Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk> +Date: Sun Sep 6 00:33:13 2009 +0900 + + CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards + + This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and + s3c2410 cpu's which fixes various problems such as the timeouts in tftp being + too short. + + Tested on an Embest SBC2440-II Board with local u-boot patches as I don't + have any s3c2400 or s3c2410 boards but need this patch applying before I can + submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets + and no new warnings or errors were found. + + It was originally submitted on 21/06/2009 but didn't get into the 2009.08 + release, and Jean-Pierre made one comment on the original patch (see + http://lists.denx.de/pipermail/u-boot/2009-July/055470.html). I've made two + changes to the original patch: + - it's been re-based to the current release + - I've re-named get_timer_raw() to get_ticks() in response to Jean-Pierre's comment + + This affects the sbc2410, smdk2400, smdk2410 and trab boards. I've copied it + directly to the maintainers of all except the sbc2410 which doesn't have an + entry in MAINTAINERS. + + Signed-off-by: Kevin Morfitt <kmorfitt@aselaptop-1.localdomain> + Tested-by: Wolfgang Denk <wd@denx.de> + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + +commit 8bc4ee9e8213abe4031ea1720aa02fa98d4402ad +Author: Minkyu Kang <mk7.kang@samsung.com> +Date: Thu Oct 1 17:20:40 2009 +0900 + + s5pc1xx: add support SMDKC100 board + + Adds new board SMDKC100 that uses s5pc100 SoC + + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> + +commit dd2c9e6a3b67c8ff56694e515e6e3c7baddd8f52 +Author: Minkyu Kang <mk7.kang@samsung.com> +Date: Thu Oct 1 17:20:28 2009 +0900 + + s5pc1xx: support serial driver + + This patch includes the serial driver for s5pc1xx. + s5pc1xx uart driver needs own register setting and clock configuration. + So, need to special driver. + + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + +commit 4678d674f0cacc983dca7f6b9933cd8291c9797c +Author: Minkyu Kang <mk7.kang@samsung.com> +Date: Thu Oct 1 17:20:08 2009 +0900 + + s5pc1xx: support onenand driver + + This patch includes the onenand driver for s5pc100 + + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit 399e5ae0d0b2eb4663fc5784201968c07d45afac +Author: Minkyu Kang <mk7.kang@samsung.com> +Date: Thu Oct 1 17:20:01 2009 +0900 + + s5pc1xx: support Samsung s5pc1xx SoC + + This patch adds support for the Samsung s5pc100 and s5pc110 + SoCs. The s5pc1xx SoC is an ARM Cortex A8 processor. + + Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> + Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> + +commit d087d19a994e741f0ce526124be117c90be482ae +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Oct 13 21:58:26 2009 -0400 + + Blackfin: drop MAC display at boot + + The default Blackfin boot would display the MAC address for the first NIC, + but this relies on the environment. The current net multi stack no longer + writes the default hardware settings to the environment, so most of the + time the display shows all zeros. This can be pretty confusing and really + doesn't add anything useful, so just drop it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 1f003cf4738a199d99c818124784058526d2d40e +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Oct 9 02:24:33 2009 -0400 + + Blackfin: reset watchdog in udelay() + + All arches apparently should reset the watchdog in their udelay loop as + noted on the mailing list recently: + + > A comment in flash_status_check() suggests that udelay() is + > expected to reset the watchdog, but I can't find any architecture + > where it does. + + If this is missing in other architectures, it should be fixed at the + root cause, i. e. in udelay() or in the respective support routines. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 370ec734557d0b0f266e6d0953229ee12cae5edd +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Oct 9 02:22:11 2009 -0400 + + Blackfin: Remove relocation fixups + + Blackfin pieces like commit 0630535e2d062dd73c1ceca5c6125c86d1127a49. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0 +Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu> +Date: Tue Sep 29 08:03:12 2009 +0200 + + at91: Update MEESC board support + + This patch implements several updates: + -disable CONFIG_ENV_OVERWRITE + -add new hardware style variants and set the arch numbers appropriate + -pass the serial# and hardware revision to the kernel + -removed unused macros from include/configs/meesc.h + -fixed multiline comment style + + Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu> + +commit 9df20ce211576aa7ac75710dcd8d0a6236abfd70 +Author: Simon Kagstrom <[simon.kagstrom@netinsight.net]> +Date: Thu Oct 1 19:41:50 2009 +0530 + + arm: Correct build with CONFIG_SYS_HUSH_PARSER set + + FLAG_PARSE_SEMICOLON is not defined without hush.h, so include that. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + +commit df3826262c0efd2baec4df23d44b3942af98f5a7 +Author: Olof Johansson <olof@lixom.net> +Date: Tue Sep 29 10:22:45 2009 -0400 + + TI: OMAP3: Overo Tobi ethernet support + + Add setup for ethernet on Tobi, allowing kernel/ramdisk to be loaded + over tftp. + + This also refactors the smc911x driver to allow for detecting when the + chip is missing. I.e. the detect_chip() function is called earlier and + will abort gracefully when the Chip ID read returns all 1's. + + Signed-off-by: Olof Johansson <olof@lixom.net> + Acked-by: Dirk Behme <dirk.behme@googlemail.com> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 2a6cc97b91997ae485312ac91ffbcea6a89b663a +Author: Olof Johansson <olof@lixom.net> +Date: Tue Sep 29 10:21:29 2009 -0400 + + SMC911X: Add chip auto detection + + Refactor the smc911x driver to allow for detecting when the chip is missing. + I.e. the detect_chip() function is called earlier and will abort gracefully + when the Chip ID read returns all 1's. + + Signed-off-by: Olof Johansson <olof@lixom.net> + Acked-by: Dirk Behme <dirk.behme@googlemail.com> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 0297ec7e2a4039b8a28346f52f3ccca4db1ddc62 +Author: Tom Rix <Tom.Rix@windriver.com> +Date: Tue Sep 29 10:19:49 2009 -0400 + + TI OMAP3 Use arm init sequence to initialize i2c + + This changes fixes an early i2c error. + + It appears that I2C is working because once a read or write + error is detected, the omap24xx_i2c driver calls i2c_init + inside its error handling check. + + While it is ok to attempt error handling this way, the boards + must not depend on this side effect to initialize it's i2c. + + Instead of explicitly calling i2c_init for every board, use + the generic arm initialization in lib_arm/board.c. By defining + the config variable CONFIG_HARD_I2C, the omap3 i2c initialization + is included in the init_sequence table. + + Run tested on Beagle. + Compile tested on the omap3's + + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + Acked-by: Dirk Behme <dirk.behme@googlemail.com> + +commit 4df30f3bb7285b2c962713a5c693c16fd90885e0 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Sep 29 09:43:04 2009 -0400 + + TI: DaVinci DM365: Enabling network Support on DM365 EVM + + This patch enables EMAC on the DM365 EVM. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + Acked-by: Tom Rix <Tom.Rix@windriver.com> + +commit 00e1665a3cf956e09ac2ce86ef6ec459f6bfb33c +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Sep 29 10:02:38 2009 -0400 + + TI: DaVinci: GPIO header file and definitions + + Some DaVinci SOC's use GPIOs to enable EMAC and DM9000. + This patch adds some definitions for GPIO registers and also adds + structures for GPIO. + A separate header file is being added so that in future we + can have a DaVinci GPIO driver similer to OMAP. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + Acked-by: Tom Rix <Tom.Rix@windriver.com> + +commit 95ae803afbdd9f673c94b992ea624a10d252afc2 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Fri Sep 18 17:30:05 2009 -0400 + + TI: DaVinci DM646x: Update flag used to represent DM646x SOC's + + In the DaVinci specific code, we use both CONFIG_SOC_DM646X and + CONFIG_SOC_DM646x to represent DM646x specific code. + This patch changes occurrences of CONFIG_SOC_DM646x to + CONFIG_SOC_DM646X. This is because for DM644x series of SOCs we use + the flag CONFIG_SOC_DM644X. We want some uniformity. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + Acked-by: Tom Rix <Tom.Rix@windriver.com> + +commit fc9165fdb3b021aa8ff02417692220fe9344072b +Author: Olof Johansson <olof@lixom.net> +Date: Mon Sep 28 08:19:30 2009 -0400 + + OMAP3: Clean up whitespace in mux configs + + Switch from space-based indentation to tab-based in mux configs, as pointed + out by WD at: + + http://lists.denx.de/pipermail/u-boot/2009-September/061241.html + + Nothing but whitespace changes in this patch (diff -w gives no output). + + Signed-off-by: Olof Johansson <olof@lixom.net> + +commit 9de0212bd7c4c82a7e8c2a2c8714f8c7abc57d08 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Mon Sep 28 08:17:50 2009 -0400 + + OMAP3 MMC: Fix warning dereferencing type-punned pointer + + Fix warning + Dereferencing type-punned pointer will break strict-aliasing rules + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + CC: Steve Sakoman <sakoman@gmail.com> + Acked-by: Tom Rix <Tom.Rix@windriver.com> + +commit e92daeb5c2050438402b87c7d614e8a13c294348 +Author: Simon Kagstrom <[simon.kagstrom@netinsight.net]> +Date: Tue Sep 22 04:01:01 2009 +0530 + + Support for the OpenRD base board + + The implementation is borrowed from the sheevaplug board and the Marvell + 1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + +commit a62e78fc444c67f958be48891bef3dab0e9eb285 +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Sep 21 20:15:17 2009 +0530 + + Kirkwood: mv88f6281gtw_ge: Add kwbimage build support + + This patch adds kwbimage configuration file + (used by mkimage utility) + to support u-boot.kwb target on mv88f6281gtw_ge board. + + To create Kirkwood boot image to be flashed on SPI Flash, + additional parameter u-boot.kwb need to be passed during make. + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + +commit 5bc7cbc15b1890682c0b279f708914518bd25f8d +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Sep 21 18:23:11 2009 +0530 + + Kirkwood: rd6281a: Add kwbimage build support + + This patch adds kwbimage configuration file + (used by mkimage utility) + to support u-boot.kwb target on rd6281a platform. + + To create Kirkwood boot image to be flashed on NAND, + additional parameter u-boot.kwb need to be passed during make. + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + +commit 23b80982a02a43bf4ead91574c9d6f1b647ccc8f +Author: Tom Rix <Tom.Rix@windriver.com> +Date: Sun Sep 27 11:10:09 2009 -0500 + + Add support for Eukrea CPU9260/CPU9G20 SBC + + these boards are built around Atmel's AT91SAM9260/9G20 and have + up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND + and include a 10/100 Ethernet PHY in RMII mode. + + Signed-off-by: Eric Benard <eric@eukrea.com> + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + +commit d8380c9d35e88759c96e68a03738446ca0cb292f +Author: Tom Rix <Tom.Rix@windriver.com> +Date: Sun Sep 27 07:47:24 2009 -0500 + + Add support for Eukrea CPUAT91 SBC + + CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR + flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII + mode. + + Signed-off-by: Eric Benard <eric@eukrea.com> + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + +commit eb95aa15e644c29b01832703aa4964fe419170f0 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Mon Sep 14 14:57:47 2009 -0400 + + TI: DaVinci DM365: Minor config cleanup + + The DM365 config was using the 'CONFIG_CMD_SAVEENV' flag. + This is already included when we include the + config_cmd_default.h header file. So this flag is removed. + Also another flag to enable NAND functions was being + enabled incorrectly. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 5d783c1ffd691ffdadbc2c2f796c41481b7cdce7 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Mon Sep 14 15:03:06 2009 -0400 + + TI DaVinci DM365: Removing header file which does not exist + + The DaVinci DM365 EVM board specific code was including a header file + which does not exist. So removing this header file. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 409ec37bd8ae8822d276e77419d899571891b191 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Sep 8 18:08:06 2009 -0400 + + TI DaVinci: DM355: Config Cleanup and Update + + This patch does the following + 1) Enables the NAND driver which is now available. + 2) Enables the 'CONFIG_MTD_DEVICE' as without this the + compilation will fail + 3) We now have a safe place to store environment and defines + an offset where this can be stored. This offset value is such that it is after + the location where U-Boot is flashed using TI flash utilities. + 4) Enables Bootdelay + 5) Increases malloc() arena size. Manufacturers are coming out with + NAND with large blocks sizes of upto 1 MiB. It has been noticed that + as the block size of the NAND used is increased, if this particular + value is not increased, the NAND driver will output out of memory + errors. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 7908c97a106765ad8816bf2271a5bf315728b274 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Sep 8 11:37:39 2009 -0400 + + TI DaVinci: DM646x: Initial Support for DM646x SOC + + DM646x is an SOC from TI which has both an ARM and a DSP. + There are multiple variants of the SOC mainly dealing with different + core speeds. + This patch adds the initial framework for the DM646x SOC. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 5d0f53624c24eaf82d58368a6a5b8476392dd5c7 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Wed Sep 9 15:26:00 2009 -0400 + + TI DaVinci: DM6446: Fix Compilation error in NAND mode + + The Default mode that is built for the Davinci DVEVM happens + to be the NOR mode. + When we want to build for the NAND mode, we get a compilation + error. This is overcome by defining the CONFIG_MTD_DEVICE + flag in the NAND mode. + The image built for NAND mode was successfully tested on the + DaVinci DM6446 EVM. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit 7a2aa8b68120f333ed2edc33475ca195810d6cb1 +Author: Tom Rix <Tom.Rix@windriver.com> +Date: Thu Sep 10 15:27:57 2009 -0400 + + OMAP3 Move cache routine to cache.S + + v7_flush_dcache_all, because it depends on omap ROM code is not + generic. Rename the function to 'invalidate_dcache' and move it + to the omap cpu directory. + + Collect the other omap cache routines l2_cache_enable and + l2_cache_disable with invalide_dcache into cache.S. This + means removing the old cache.c file that contained l2_cache_enable + and l2_cache_disable. + + The conversion from cache.c to cache.S was done most through + disassembling the uboot binary. The only significant change was + to change the comparision for the return of get_cpu_rev from + + cmp r0, #0 + beq earlier_than_label + + Which was lost information to + + cmp r0, #CPU_3XX_ES20 + blt earlier_than_label + + The paths through the enable routine were verified by + adding an infinite loop and seeing the hang. Then + removing the infinite loop and seeing it continue. + + The disable routine is similar enough that it was not + tested with this method. + + Run tested by cold booting from nand on beagle and zoom1. + Compile tested on MAKEALL arm. + + Signed-off-by: Tom Rix <Tom.Rix@windriver.com> + +commit a16df2c11188297eca43cf6080c70fb69b960232 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Sep 8 17:09:52 2009 -0400 + + TI DaVinci: Remove references to SZ_xx + + This patch removes the asm/sizes.h header file from being + included in the DaVinci SOC configs. + References to SZ_xx have been replaced by appropriate + bit shifted values. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + Acked-by: Wolfgang Denk <wd@denx.de> + +commit 285870f75378aca41c5063e4358ad93bf3014fd8 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Thu Oct 9 01:27:18 2008 -0500 + + Leave x86emu op code tables in default section + + Forcing the tables into got2 caused extra relocation when using -mrelocatable. + This patch requires any board defining CONFIG_BIOSEMU to use -mrelocatable. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Acked-by: Jin Zhengxiong <Jason.Jin@freescale.com> + +commit be2254423b86572841aa70ff05d20933d1b49823 +Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> +Date: Sat Oct 10 12:42:22 2009 +0200 + + Update all board to support new bbmiiphy driver (with multibus support) + + Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 310cecb8ccdbc8a9be580e75b2fd362179d78535 +Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> +Date: Sat Oct 10 12:42:21 2009 +0200 + + Add bb_miiphy_init call before any ethernet bring-up code. + + Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 4ba31ab33ac824635fcb49ac609070a9ebcab7f0 +Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> +Date: Sat Oct 10 12:42:20 2009 +0200 + + Rewrite the miiphybb (Bit-banged MII bus driver) in order to support an arbitrary number of mii buses. + + This feature is useful when your board uses different mii buses for different + phys and all (or a part) of these buses are implemented via bit-banging mode. + + The driver requires that the following macros should be defined into the board + configuration file: + + CONFIG_BITBANGMII - Enable the miiphybb driver + CONFIG_BITBANGMII_MULTI - Enable the multi bus support + + If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs + to define at least the following macros: + + MII_INIT - Generic code to enable the MII bus (optional) + MDIO_DECLARE - Declaration needed to access to the MDIO pin (optional) + MDIO_ACTIVE - Activate the MDIO pin as out pin + MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin + MDIO_READ - Read the MDIO pin + MDIO(v) - Write v on the MDIO pin + MDC_DECLARE - Declaration needed to access to the MDC pin (optional) + MDC(v) - Write v on the MDC pin + + The previous macros make the driver compatible with the previous version + (that didn't support the multi-bus). + + When the CONFIG_BITBANGMII_MULTI is also defined, the board code needs to fill + the bb_miiphy_buses[] array with a record for each required bus and declare + the bb_miiphy_buses_num variable with the number of mii buses. + The record (struct bb_miiphy_bus) has the following fields/callbacks (see + miiphy.h for details): + + char name[] - The symbolic name that must be equal to the MII bus + registered name + int (*init)() - Initialization function called at startup time (just + before the Ethernet initialization) + int (*mdio_active)() - Activate the MDIO pin as output + int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin + int (*set_mdio)() - Write the MDIO pin + int (*get_mdio)() - Read the MDIO pin + int (*set_mdc)() - Write the MDC pin + int (*delay)() - Delay function + void *priv - Private data used by board specific code + + The board code will look like: + + struct bb_miiphy_bus bb_miiphy_buses[] = { + { .name = miibus#1, .init = b1_init, .mdio_active = b1_mdio_active, ... }, + { .name = miibus#2, .init = b2_init, .mdio_active = b2_mdio_active, ... }, + ... + int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / + sizeof(bb_miiphy_buses[0]); + + Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit efaf6f1bf6ebdd8f16b0d0c2960abe8d06f95af4 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Oct 2 18:54:20 2009 -0400 + + mpc83xx: cosmetic comment update relating to SPD EEPROM + + commit 6d0f6bcf337c5261c08fabe12982178c2c489d76 did the big + rename of CFG_ macros to CONFIG_SYS macros. But it missed + a couple of instances within comments. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit afc3ba0fc4195624e79e21244380ed7cc2fd6969 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Thu Oct 8 02:03:51 2009 +0200 + + relocation: Do not relocate NULL pointers. + + NULL is an absolute value and should not be relocated. + After this correction code like: + void weak_fun(void) __attribute__((weak)); + printf("weak_fun:%p\n", weak_fun); + will still print null after relocation. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit 3beb40c2473f0dd373231c723d88c51e46ad96f7 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Wed Oct 7 11:45:00 2009 -0500 + + 85xx: Ensure BSS segment isn't linked at address 0 + + When U-Boot is relocated from flash to RAM pointers are modified + accordingly. However, pointers initialzed with NULL values should not + be modified so that they maintain their intended NULL value. If the + BSS segment is linked at address 0 its address will not be + updated as necessary during relocation. + + This is a temporary workaround. The end goal is to add support to + U-Boot to dynamically locate the BSS at an arbitrary address at + runtime. When the ability to fixup the BSS inteligently is + added, this workaround can be removed and the 85xx link script + can put the BSS at a fixed address at link time. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 95c44ec485b46ffb43dbdaa299f1491a500fdadf +Author: Detlev Zundel <dzu@denx.de> +Date: Wed Oct 7 16:38:05 2009 +0200 + + tqm5200: Correct comment and code in post_hotkeys_pressed. + + This fixes the code and the comment according to the original intent of + doing an intensive memory test when PSC6_3 is pulled low on the STK52xx. + Notably PORT_CONFIG will be overridden with this correct code now, + so beware. + + The original code only worked by coincidence depending on the PORT_CONFIG + setting from the header file. The new code was tested to ensure that the + (undocumented) memory test still works on the STK52x. + + Signed-off-by: Detlev Zundel <dzu@denx.de> + CC: Martin Krause <Martin.Krause@tqs.de> + + Minor white-space cleanup. + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit da01f53404f99db185d196867af79371725d4683 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Oct 4 22:56:08 2009 +0200 + + mpc512x: fix fixed_sdram() init code. + + Commit 054197ba and later fixes used an array to initialize some of + the MDDRC parameters; however, the use of an array turned out to be a + bad idea as it was not possible to correlate structure entries to + array indices in readable and reliable way. Now we use a struct + instead, which makes this self-explanatory. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit dbcc357166bed20df13450e93a501f30b197efd1 +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Sun Oct 4 20:04:22 2009 +0200 + + ppc4xx: respect 80-chars per line in ppc*.h files + + After running checkstyle.pl on the three previous patches I noted that in + the *.h files there were a lot of long lines. This patch solves this problem. + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 78d2a641371ec71cc3786b167a318c7b115fbb90 +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Sun Oct 4 20:04:21 2009 +0200 + + ppc4xx: Rework cmd reginfo + + The command "reginfo" got an overhaul for the ppc4xx. It dumps all the + relevant HW configuration registers (address, symbolic name, content). + This allows to easily detect errors in *.h files and changes in the HW + configuration. + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ddc922ff2c20ae0b7f9ce2df1ac28143e2f325bd +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Sun Oct 4 20:04:20 2009 +0200 + + ppc_4xx: Apply new HW register names + + Modify all existing *.c files to use the new register names + as seen in the AMCC manuals. + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f80e61dcfe53fa3a5936659883415c9bd1b5a3d9 +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Sun Oct 4 20:04:19 2009 +0200 + + ppc4xx: Cleanup some HW register names + + Here you find all the changes in the include directory for new register names + and adapting other ones to the names used by AMCC in their manuals, e.g. + For 440EPx/GRPPC440EPx/GRX, Revision 1.15 – September 22, 2008 + For PPC405GP Embedded Processor, Revision 1.02 – March 22, 2006 + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 56f14818f66c68a8b9e45925f29ceb974405ad48 +Author: Stefan Roese <sr@denx.de> +Date: Tue Oct 6 07:21:08 2009 +0200 + + ppc4xx: Add PPC405EX(r) Rev D support + + Unfortunately some Rev D PPC405EX/405EXr PVR's are identical with older + 405EX(r) parts. Here a list: + + 0x12911475 - 405EX Rev D with Security *and* 405EX Rev A/B witout Sec + 0x12911473 - 405EX Rev D without Security *and* 405EXr Rev A/B with Sec + + Since there are only a few older parts in the field, this patch now + changes the PVR's above to represent the new Rev D versions. + + Signed-off-by: Stefan Roese <sr@denx.de> + Cc: Phong Vo" <pvo@amcc.com> + +commit 06dfaeef52a5f773ae4292432e3c74ff52ead316 +Author: Stefan Roese <sr@denx.de> +Date: Fri Oct 2 14:35:16 2009 +0200 + + ppc4xx: Fix msg "initialization as root-complex failed" upon PCIe scan + + This message is printed upon PCIe bus scan, not only upon error, but also + if no PCIe device is detected at all. Since this is not an error, let's + remove this message in this case. We already have the message + "link is not up." if there is no PCIe device present. + + Signed-off-by: Stefan Roese <sr@denx.de> + Acked-by: Wolfgang Denk <wd@denx.de> + +commit 54f5f056aa1daa3e39bad1c5c3fb43a72cdb9e84 +Author: Mike Nuss <mike@terascala.com> +Date: Mon Oct 5 12:33:28 2009 -0400 + + PPC4xx: Denali core: Fix incorrect DDR row bits + + The SPD detection code for the Denali memory controller used on some + ppc4xx + processors incorrectly encodes DDR0_42. With certain memory + configurations, + this can cause the bootwrapper to incorrectly calculate the installed + memory + size, because the number of row bits is wrong. This patch fixes that + encoding. + + Signed-off-by: Mike Nuss <mike@terascala.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 99dbd4efd6d5ecc37d7e8f28b20d9be8c83055c7 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Mon Oct 5 00:02:51 2009 -0700 + + Add information about return values of xxx_eth_register() in documentation + + As discussed on mailing list, <0 indicates failure, >=0 indicates number + of interfaces found. + + Also added blurb about private data + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 1f1e774ec6242d4ea34e5cff57232deb5bb587e0 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Sep 9 14:41:22 2009 -0400 + + document network driver framework + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Wolfgang Denk <wd@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit aba8237257dd15b0e76cc517f0e741c0908ee0b9 +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Wed Sep 9 15:59:19 2009 +0530 + + net: kirkwood_egiga.c: fixed build warning + + if link up detection code is disabled through config option, it gives build warning. + This patch fixes the same + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 7194ab809532eeca3e2ee5dc12017cb901cc5842 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Sun Oct 4 22:37:03 2009 -0700 + + Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API + + All in-tree boards that use this controller have CONFIG_NET_MULTI + added + Also: + - changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111 + - cleaned up line lengths + - modified all boards that override weak function in this driver + - modified all eeprom standalone apps to work with new driver + - updated blackfin standalone EEPROM app after testing + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 32e7f239dda8638377edb0d3e7ac269cabbafbe6 +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Sep 21 20:28:18 2009 +0530 + + net: phy: mv88e61xx.c : fixed build warning + + following build warning was observed + + mv88e61xx.c: In function ‘mv88e61xx_busychk’: + mv88e61xx.c:208: warning: dereferencing type-punned pointer will break strict-aliasing rules + + This patch fixes the same + Patch tested for rd6281a board build + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit c0b46d8ead3c6c5b569c83544fd71b9d73356869 +Author: James Clough <james@rtetc.com> +Date: Thu Sep 10 09:11:50 2009 +0200 + + net: Fix problem with 405EZ ethernet interrupt + + On 405EZ the RX-/TX-interrupts are coalesced into one IRQ bit in the + UIC. We need to acknowledge the RX-/TX-interrupts in the + SDR0_ICINTSTAT reg as well. + + This problem was introduced with commit + d1631fe1 [ppc4xx: Consolidate PPC4xx UIC defines] + + Signed-off-by: James Clough <james@rtetc.com> + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 91b469c95faf92435e3d5d78292ba78075a3c5ca +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Sep 2 04:18:55 2009 -0400 + + net: add random_port() prototype + + The random_port() is meant to be used by other net code, but without a + prototype, we get fun warnings like: + dns.c: In function 'DnsSend': + dns.c:89: warning: implicit declaration of function 'random_port' + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 3469424cb6d939c7aedf1e0efdec44a797c0a18c +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:37 2009 -0500 + + ppc: Remove reloc_off field from global_data structure + + Now that proper relocation is supported, the reloc_off field is no longer + necessary. + + Note that the location of the standalone application jump table pointer + in the global data structure is affected by this change, breaking + execution of standalone applications compiled for previous versions of + U-Boot. + + We therefore increment XF_VERSION to 6 + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0630535e2d062dd73c1ceca5c6125c86d1127a49 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Sep 22 09:27:55 2009 -0500 + + arm/microblaze/nios/nios2/sh: Remove relocation fixups + + These architectures don't need relocation fixups, so reduce their + codesize a bit by defining CONFIG_RELOC_FIXUP_WORKS. + + Also remove the reloc_off field from their global data structures + as it is no longer needed. + + Note that the location of the standalone application jump table pointer + in the global data structure is affected by this change, breaking + execution of standalone applications compiled for previous versions of + U-Boot. We will therefore increment XF_VERSION in the next commit, + which also touches this area. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 521af04d853361b49344b61892eb0618f9f713c5 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:36 2009 -0500 + + Conditionally perform common relocation fixups + + Add #ifdefs where necessary to not perform relocation fixups. This + allows boards/architectures which support relocation to trim a decent + chunk of code. + + Note that this patch doesn't add #ifdefs to architecture-specific code + which does not support relocation. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 3cbcfa70b116df1bbdc90ba31c61adcaec058a8a +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:35 2009 -0500 + + p3mx: Remove serial relocation fixups + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 80f73b92a19129854876ec3f1aef531a09e86d2d +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:34 2009 -0500 + + lwmon, lwmon5: Remove sysmon POST relocation fixups + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 331ab60c4a418c39e5b1a05d4648a4155d0ad13e +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:33 2009 -0500 + + mpl: Remove memory test relocation fixups + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 6385b28116f775da4771b768ba9bf93c3aaaf26e +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:32 2009 -0500 + + fpga: Remove relocation fixups + + PPC boards are the only users of the current FPGA code which is littered + with manual relocation fixups. Now that proper relocation is supported + for PPC boards, remove FPGA manual relocation. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit cd1011db80287eef933d1599b74cff1116c93134 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:31 2009 -0500 + + tsec: Remove PHY command relocation fixups + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit b5650c5d8c99100144d8e4e9af910405f857bb7a +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:30 2009 -0500 + + ppc: Remove board-specific command table relocation fixups + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit e6b05e774d7ce1641613cdeffb69c1d48139a869 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:29 2009 -0500 + + ppc: Remove extable relocation fixups + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit b32a894011b1436758905fa10e6a03b8539c43c9 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:28 2009 -0500 + + ppc: Remove pci config table pointer relocation fixups + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit a0e2066f392782730f0398095e583c87812d97f2 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:27 2009 -0500 + + ppc: Remove board.c relocation fixups + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 244615197469dd6fe75ae082f38424b97c79aeaf +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:26 2009 -0500 + + ppc: Check for compilers that don't support relocation + + Certain ppc compilers are known not to generate the .fixup section + properly. The .fixup section is necessary to create a relocatable + U-Boot image. A basic check for the existence of the .fixup section + should hopefully catch the majority of broken compilers which don't + support relocation. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 858290178f222d998b6425d85cf06822467918f3 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 11:20:25 2009 -0500 + + ppc: Enable full relocation to RAM + + The following changes allow U-Boot to fully relocate from flash to + RAM: + - Remove linker scripts' .fixup sections from the .text section + - Add -mrelocatable to PLATFORM_RELFLAGS for all boards + - Define CONFIG_RELOC_FIXUP_WORKS for all boards + + Previously, U-Boot would partially relocate, but statically initialized + pointers needed to be manually relocated. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 3b4bd2d75c4b3c1a4570f47ffaaed66f56a78ff4 +Author: Matthias Fuchs <matthias.fuchs@esd.eu> +Date: Wed Sep 30 11:55:04 2009 +0200 + + ppc4xx: Add SDRAM detection for PMC440 boards + + This patch adds support to detect the amount of DDR2 SDRAM + on PMC440 modules. Detection is done by probing through + a list of available and supported hardware configurations + from 1GByte down to 256MB. + + The static TLB entry is replaced by dynamically created entries. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit fb95169e39f2d03270bed552d27bbb02627a443e +Author: Stefan Roese <sr@denx.de> +Date: Mon Sep 28 17:33:45 2009 +0200 + + ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling + + This patch merges the ECC handling (ECC parity byte writing) into one + file (ecc.c) for all PPC4xx SDRAM controllers except for PPC440EPx/GRx. + This exception is because only those PPC's use the completely different + Denali SDRAM controller core. + + Previously we had two routines to generate/write the ECC parity bytes. + With this patch we now only have one core function left. + + Tested on Kilauea (no ECC) and Katmai (with and without ECC). + + Signed-off-by: Stefan Roese <sr@denx.de> + Cc: Felix Radensky <felix@embedded-sol.com> + Cc: Grant Erickson <gerickson@nuovations.com> + Cc: Pieter Voorthuijsen <pv@prodrive.nl> + +commit d24bd2517a2b847f773453eab0ee5b1c8ebc74ba +Author: Felix Radensky <felix@embedded-sol.com> +Date: Sun Sep 27 23:56:12 2009 +0200 + + ppc4xx: Reorganize DDR2 ECC handling + + Reorganize DDR2 ECC handling to use common code for + SPD DIMMs and soldered SDRAM. Also, use common code + to display SDRAM info (ECC, CAS latency) for SPD and + soldered SDRAM variants. + + Signed-off-by: Felix Radensky <felix@embedded-sol.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 46a887949e11d2cddb91e17ca47e73341d71a379 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Sep 30 03:09:16 2009 -0400 + + Blackfin: update default console= settings + + The Linux kernel has changed the way it numbers serial ports, so update + the default command line to match it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 4c5f307d58604dea001cccf388aa077a902ab0a5 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Sep 21 18:04:49 2009 -0400 + + Blackfin: bf533-ezkit: update env location + + The u-boot image has outgrown the current space and overflowed into the + env sector. So move the env to the next available sector (we've already + allocated the first few sectors anyways for u-boot). + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 24b17d8a3c3a4b9ceaf6363ebe0021011b0b8bd8 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Sep 30 08:39:44 2009 -0500 + + ppc/85xx: get_law_entry isn't used in CONFIG_NAND_SPL + + Don't include get_law_entry as part of the NAND_SPL build since the + code isnt used. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 693a048d8ac191181f5b9adbff642d3f1bbd479f +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Wed Sep 23 15:20:39 2009 +0800 + + Add README.mpc8536ds + + Add boot from NAND/eSDHC/eSPI description + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit e40ac4870c6e72302044e98338322f45c34435bd +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Wed Sep 23 15:20:38 2009 +0800 + + On-chip ROM boot: MPC8536DS support + + The MPC8536E is capable of booting from the on-chip ROM - boot from + eSDHC and boot from eSPI. When power on, the porcessor excutes the + ROM code to initialize the eSPI/eSDHC controller, and loads the mian + U-Boot image from the memory device that interfaced to the controller, + such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or + L2SRAM, then boot from it. + + The memory device should contain a specific data structure with control + word and config word at the fixed address. The config word direct the + process how to config the memory device, and the control word direct + the processor where to find the image on the memory device, or where + copy the main image to. The user can use any method to store the data + structure to the memory device, only if store it on the assigned address. + + The on-chip ROM code will map the whole 4GB address space by setting + entry0 in the TLB1, so the main image need to switch to Address space 1 + to disable this mapping and map the address space again. + + This patch implements loading the mian U-Boot image into L2SRAM, so + the image can configure the system memory by using SPD EEPROM. + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 9a1a0aedbbd56f901bfbc124f18ec6d9dcefe282 +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Wed Sep 23 15:20:37 2009 +0800 + + NAND boot: MPC8536DS support + + MPC8536E can support booting from NAND flash which uses the + image u-boot-nand.bin. This image contains two parts: a 4K + NAND loader and a main U-Boot image. The former is appended + to the latter to produce u-boot-nand.bin. The 4K NAND loader + includes the corresponding nand_spl directory, along with the + code twisted by CONFIG_NAND_SPL. The main U-Boot image just + like a general U-Boot image except the parts that included by + CONFIG_SYS_RAMBOOT. + + When power on, eLBC will automatically load from bank 0 the + 4K NAND loader into the FCM buffer RAM where CPU can execute + the boot code directly. In the first stage, the NAND loader + copies itself to RAM or L2SRAM to free up the FCM buffer RAM, + then loads the main image from NAND flash to RAM or L2SRAM + and boot from it. + + This patch implements the NAND loader to load the main image + into L2SRAM, so the main image can configure the RAM by using + SPD EEPROM. In the first stage, the NAND loader copies itself + to the second to last 4K address space, and uses the last 4K + address space as the initial RAM for stack. + + Obviously, the size of L2SRAM shouldn't be less than the size + of the image used. If so, the workaround is to generate another + image that includes the code to configure the RAM by SPD and + load it to L2SRAM first, then relocate the main image to RAM + to boot up. + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 07355700523203c5f72018712cf0d93683f255c8 +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Wed Sep 23 15:19:32 2009 +0800 + + mpc8536: fix board config file line length + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit dd9ca98f2600000e5c2744735040100b770650e7 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Sep 25 11:14:11 2009 -0400 + + sbc8548: reclaim wasted sector in boot flash + + By nature of being based off the MPC8548CDS board, this + board inherited an ENV_SIZE setting of 256k. But since + it has a smaller flash device (8MB soldered on), it has + a native sector size of 128k, and hence the ENV_SIZE was + causing 2 sectors to be used for the environment. + + By removing the unused sector, we can push TEXT_BASE up + closer to the end of address space and reclaim that + sector for any other application. This also fixes the + mismatch between TEXT_BASE and MONITOR_LEN reported by + Kumar earlier. + + Since this board also supports the ability to boot off + the 64MB SODIMM flash, this change is forward looking + with that in mind; i.e. the settings for MONITOR_LEN + and ENV_SIZE will work when the 512k sectors of the + SODIMM flash are used for alternate boot in the future. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8280912e0657e96a7b7d8da7003656d62b0fd109 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Sep 28 21:38:00 2009 -0500 + + ppc/85xx: Clean up immap_85xx.h + + * Converted all white space to tabs + * Converted all types to u8/u16/u32 + * Reduce lines to fit in 80 columns + * Renamed MPC85xx_{Q,B}MAN -> FSL_CORENET_{Q,B}MAN + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit d44e9c1736283f0abc5d3c5d28cfea8480c93a79 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Sep 28 16:33:18 2009 -0500 + + NAND: davinci: Fix warnings when 4-bit ECC not used + + I accidentally left v2 of "NAND: DaVinci:Adding 4 BIT ECC support" + applied when I pushed the tree last merge window, and missed these fixes + which were in v3 of that patch. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit ca6189db484882798f2a35a476c07e618e21f6d3 +Author: Kyungmin Park <kmpark@infradead.org> +Date: Tue Sep 22 09:05:00 2009 +0900 + + Refactor OneNAND IPL code + + Refactoring the OneNAND IPL code + + and some minor fixed: + - Remove unnecessary header file + - Fix wrong access at read interrupt + - The recent OneNAND has 4KiB pagesize + + Also Board can override OneNAND IPL image + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit a05e3f9a084fc8951d87745b3a91df246432df7d +Author: Shinya Kuribayashi <skuribay@pobox.com> +Date: Sat Sep 12 18:01:40 2009 +0900 + + MIPS: VCT: Remove read_spareram reference + + The commit ecad289fc6bd9d89ef4d5093cc7b6fd712fd0d29 (OneNAND: Remove + unused read_spareram and add unlock_all as kernel does) forgot to remove + a local reference to read_spareram in board/micronas/vct/ebi_onenand.c, + which causes the following build failure when configured with OneNAND: + + ebi_onenand.c: In function 'onenand_board_init': + ebi_onenand.c:196: error: 'struct onenand_chip' has no member named 'read_spareram' + make[1]: *** [ebi_onenand.o] Error 1 + make[1]: *** Waiting for unfinished jobs.... + make: *** [board/micronas/vct/libvct.a] Error 2 + + Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com> + Acked-by: Stefan Roese <sr@denx.de> + Cc: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit ef37c6835eac66206a9c7c11f0c7186f5d64bf91 +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Fri Sep 25 14:05:57 2009 +0200 + + ubifs: Correct dereferencing of files-after-symlinks + + Files in directories which are symlinked to were not dereferenced + correctly in last commit. E.g., with a symlink + + /boot/lnk -> /boot/real_dir + + loading + + /boot/lnk/uImage + + will fail. This patch fixes that by simply seeing to it that the target + base directory has a slash after it. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b306db2f1bf561b5823a655c677fe28cfad80cfb +Author: Stefan Roese <sr@denx.de> +Date: Thu Sep 24 14:10:30 2009 +0200 + + ppc4xx: Remove mtsdram0() marcos and use common mtsdram() instead + + Additionally some whitespace coding style fixes. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 95b602bab5fec2fffab07a01ea3947c70d1bacc1 +Author: Stefan Roese <sr@denx.de> +Date: Thu Sep 24 13:59:57 2009 +0200 + + ppc4xx: Convert PPC4xx SDRAM defines from lower case to upper case + + The latest PPC4xx register cleanup patch missed some SDRAM defines. + This patch now changes lower case UIC defines to upper case. Also + some names are changed to match the naming in the IBM/AMCC users + manuals (e.g. mem_mcopt1 -> SDRAM0_CFG). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 952e7760bfc5b0e3b142b9ce34e7fbb7d008c900 +Author: Stefan Roese <sr@denx.de> +Date: Thu Sep 24 09:55:50 2009 +0200 + + ppc4xx: Convert PPC4xx UIC defines from lower case to upper case + + The latest PPC4xx register cleanup patch missed the UIC defines. + This patch now changes lower case UIC defines to upper case. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d1c9e5b37901b53ffc1ce3f08ec8ed61bfd557b6 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Tue Sep 22 13:40:44 2009 +0200 + + fsl_i2c: Do not generate STOP after read. + + __i2c_read always ends with a STOP condition thereby releasing + the bus. It is cleaner to do the STOP magic in i2c_read(), like + i2c_write() does. This may also help future multimaster systems which + wants to hold on to the bus until all transactions are finished. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit 99404202127346b9e91503bbd69deafa18c980c4 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Thu Sep 17 11:07:17 2009 +0200 + + fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR + + The latest AN2919 has changed the way FDR/DFSR should be calculated. + Update the driver according to spec. However, Condition 2 + is not accounted for as it is not clear how to do so. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + Acked-by: Wolfgang Grandegger <wg@grandegger.com> + +commit d01ee4db9302cfccaa5c548a1c4e873b415681a0 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Thu Sep 17 11:07:16 2009 +0200 + + fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR} + + Some boards need a higher DFSR value than the spec currently + recommends so give these boards the means to define there own. + + For completeness, add CONFIG_FSL_I2C_CUSTOM_FDR too. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit 21f4cbb77299788e2b06c9b0f48cf20a5ab00d4a +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Thu Sep 17 11:07:15 2009 +0200 + + fsl_i2c: Wait for STOP condition to propagate + + After issuing a STOP one must wait until the STOP has completed + on the bus before doing something new to the controller. + + Also add an extra read of SR as the manual mentions doing that + is a good idea. + + Remove surplus write of CR just before a write, isn't required and + could potentially disturb the I2C bus. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit c7190f028fa950d4d36b6d0b4bb3fc72602ec54c +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Sep 25 18:19:44 2009 -0500 + + mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields + + some LCRR bits are not documented throughout the 83xx family RMs. + New board porters copying similar board configurations might omit + setting e.g., DBYP since it was not documented in their SoC's RM. + + Prevent them bricking their board by retaining power on reset values + in bit fields that the board porter doesn't explicitly configure + via CONFIG_SYS_<registername>_<bitfield> assignments in the board + config file. + + also move LCRR assignment to cpu_init_r[am] to help ensure no + transactions are being executed via the local bus while CLKDIV is being + modified. + + also start to use i/o accessors. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 00ec0ff549b8cb6fb6d40e275aeb5a460642a3bd +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Mon Sep 21 17:44:51 2009 -0400 + + sbc8349: tidy up Makefile to use new configuration script. + + Commit 804d83a5 allows us to move all the configuration + variation tweaks out of the top level Makefile and down + into the board config header. This takes advantage of + that for the sbc8349 board. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit da6eea0f48c24a318e6de69d6bca0bb5ab70572b +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Sep 16 23:22:08 2009 +0400 + + mpc83xx: mpc8360emds: Add QE USB device tree fixups + + With this patch we can change QE USB mode without need to hand-edit + the device tree. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 89da44ce3fe1638312d71cb3add8c6a6d2c7c1f3 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Sep 16 23:21:59 2009 +0400 + + mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs + + This patch fixes various ethernet issues with gigabit links handling + in U-Boot. The workarounds originally implemented by Kim Phillips for + Linux kernel. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 034477bb31948d698d18b84bc0834c3e25a14d04 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Sep 16 23:21:57 2009 +0400 + + mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available + + Since commit 5c2ff323a94e27e481f70c44838d43fcd844dd46 ("mpc8360emds: + rework LBC SDRAM setup"), LBC SDRAM is available for use in Linux. + + Though, it appears that QE Ethernet in Gigabit mode can't transmit + large packets when it tries to work with a data in LBC SDRAM (memtest + didn't discover any issues, is LBC SDRAM just too slow?). + + With this patch we can still use the board without DDR memory, but + if DDR is available, we don't use LBC SDRAM. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit d77c779bc23596aa3693d1c5c4d5b6e1072f93f2 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Sep 16 23:21:55 2009 +0400 + + net: uec: Fix uccf.h and uec.h headers to include headers they depend on + + Headers should include headers containing prototypes and defines they + depend on, don't assume that they're included by somebody else. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 6185f80c311cc3bdef2f8d5096c61e40ca6f48b2 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Sep 16 23:21:53 2009 +0400 + + net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs + + This will be needed for MPC8360E-MDS boards with rev. 2.1 CPUs. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 984f10baac8ef6032df52f135943d6b0bc96f724 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 25 14:16:00 2009 +0200 + + mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[] + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6e748ea004473cce99fbde6382dd580c10ffdb60 +Author: Ken MacLeod <ken@bitsko.slc.ut.us> +Date: Fri Sep 11 15:16:18 2009 -0500 + + cmd_fdt.c: fix parse of byte streams and strings + + Commit 4abd844d8e extended the fdt command parser to handle property + strings which are split across multiple arguments but it was broken for + byte streams and strings. + + Byte stream parsing: + + * Fixes where it would terminate early or go into an endless loop. + + * Fixes a 0x00 being inserted into the data if there is a space after + '[' or a separate argument. + + * Fixes dereferencing the argument pointer after the last argument. + + * Checks for bad characters. + + String parsing: + + * Treat multiple arguments as a string list. This fixes an issue where + only the last argument was stored. + + Signed-off-by: Ken MacLeod <ken@bitsko.slc.ut.us> + +commit 3887c3fbdbbe6bbb4df60ed415c8e1ab9fe56b5e +Author: Heiko Schocher <hs@denx.de> +Date: Wed Sep 23 07:56:08 2009 +0200 + + mucmc52, uc101: delete ata@3a00 node, if no CF card is detected + + U-Boot can detect if an IDE device is present or not. + If not, and this new config option is activated, U-Boot + removes the ATA node from the DTS before booting Linux, + so the Linux IDE driver does not probe the device and + crash. This is needed for buggy hardware (uc101) where + no pull down resistor is connected to the signal IDE5V_DD7. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 7f625fc6d3ba8f890e843ac01717804c2462ed53 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Sep 23 07:56:04 2009 +0200 + + mpc5200, mucmc52, uc101: config cleanup + + - As these boards are similiar, collect common config options + in manroland/common.h and manroland/mpc52xx-common.h + for mpc5200 specific common options for this manufacturer. + - add OF support + - update default environment + + Signed-off-by: Heiko Schocher <hs@denx.de> + + Minor edit of commit message. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 9d142ea8f787882ab732fa531a34db091bfa363d +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 25 00:57:49 2009 +0200 + + Fix "ppc/85xx: Clean up use of LAWAR defines" breakage + + Commit 002741ae86 modified include/asm-ppc/mmu.h such that the LAWAR_ + defines were only enabled for the 83xx platform, but they are also + needed on MPC512x system. Enabling these for E300 systems seems thus + more appropriate. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit a5aa3998ab6408a6ac738a3ce8005e647b9465f8 +Author: Martha M Stan <mmarx@silicontkx.com> +Date: Mon Sep 21 14:08:00 2009 -0400 + + Add Elpida Memory Configuration to mpc5121ads Boards + + Signed-off-by: Martha M Stan <mmarx@silicontkx.com> + + Minor coding style cleanup. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 054197ba8ee5ef1e41694df58531b6e53ec43f2d +Author: Martha M Stan <mmarx@silicontkx.com> +Date: Mon Sep 21 14:07:14 2009 -0400 + + mpc512x: Streamlined fixed_sdram() init sequence. + + Signed-off-by: Martha M Stan <mmarx@silicontkx.com> + + Minor cleanup: + + Re-ordered default_mddrc_config[] to have matching indices. + + This allows to use the same index "N" for source and target fields; + before, we had code like this + + out_be32(&im->mddrc.ddr_time_config2, mddrc_config[3]); + + which always looked like a copy & paste error because 2 != 3. + + Also, use NULL when meaning a null pointer. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 39aaca1f66a0e5b1204b0789f6c0097938c00ad1 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Mar 19 02:46:19 2009 -0500 + + ppc/p4080: Determine various chip frequencies on CoreNet platforms + + The means to determine the core, bus, and DDR frequencies are completely + new on CoreNet style platforms. Additionally on p4080 we can have + different frequencies for FMAN and PME IP blocks. We need to keep track + of the FMAN & PME frequencies since they are used for time stamping + capabilities inside each block. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3c2a67eec8a0facc865b400caca52e7f6b7adf01 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 17 01:52:37 2009 -0500 + + ppc/p4080: Handle timebase enabling and frequency reporting + + On CoreNet style platforms the timebase frequency is the bus frequency + defined by 16 (on PQ3 it is divide by 8). Also on the CoreNet platforms + the core not longer controls the enabling of the timebase. We now need + to enable the boot core's timebase via CCSR register writes. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7e4259bba4c56536760e42d32dacfb3233f216fd +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Mar 19 02:39:17 2009 -0500 + + ppc/p4080: Add various p4080 related defines (and p4040) + + There are various locations that we have chip specific info: + + * Makefile for which ddr code to build + * Added p4080 & p4040 to cpu_type_list and SVR list + * Added number of LAWs for p4080 + * Set CONFIG_MAX_CPUS to 8 for p4080 + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 39a7e7fd538cdf49e7e8a2f0634ea5e15e12b4ec +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 17 01:44:39 2009 -0500 + + ppc/p4080: CoreNet platfrom style secondary core release + + The CoreNet platform style of bringing secondary cores out of reset is + a bit different that the PQ3 style. Mostly the registers that we use + to setup boot translation, enable time bases, and boot release the cores + have moved around. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a880cf3e0e1c220d780eccd0b101170c4499485d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 17 01:44:00 2009 -0500 + + ppc/p4080: CoreNet platfrom style CCSRBAR setting + + On CoreNet based platforms the CCSRBAR address is split between an high & + low register and we no longer shift the address. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 418ec8584343f04048e2cc7ee96b6b29be54ad97 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Mar 19 02:32:23 2009 -0500 + + ppc/p4080: Add support for CoreNet style platform LAWs + + On CoreNet based platforms the LAW address is split between an high & + low register and we no longer shift the address. Also, the target IDs + on CoreNet platforms have been completely re-assigned. + + Additionally, added a new find_law() API to which LAW an address hits in. + This is need for the CoreNet style boot release code since it will need + to determine what the target ID should be set to for boot window + translation. + + Finally, enamed LAWAR_EN to LAW_EN and moved to header so we can use + it elsewhere. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 01df521217957d77d53c2d570183eded7030938f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Sep 16 09:43:12 2009 -0500 + + ppc/p4080: Add p4080 platform immap definitions + + The p4080 SoC has a significant amount of commonality with the 85xx/PQ3 + platform. We reuse the 85xx immap and just add new definitions for + local access and global utils. The global utils is now broken into + global utils, clocking and run control/power management. + + The offsets from CCSR for a number of blocks have also changed. We + introduce the CONFIG_FSL_CORENET define to distinquish the PQ3 style of + platform from the new p4080 platform. We don't use QoirQ as there are + products (like p2020) that are PQ3 based platforms but have the QoirQ + name. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 25bacf7a2b096496e2c58f2de4e5b2bce8fba038 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Sep 22 15:45:44 2009 -0500 + + ppc/85xx: Fix enabling of L2 cache + + We need to flash invalidate the locks in addition to the cache + before we enable. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit cb0ff65c619efacdc0ba69aa8ee6ede7dd364a38 +Author: Vivek Mahajan <vivek.mahajan@freescale.com> +Date: Tue Sep 22 12:48:27 2009 +0530 + + 85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ + + The code assumed names where just numbers and always prefixed 'mpc'. + However newer QorIQ don't follow the mpc naming scheme. + + Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 234a89d911ce28e46372f555d7c14e28424f2b0d +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Tue Sep 22 14:53:21 2009 +0800 + + ppc/85xx: add cpu init config file for boot from NAND + + When boot from NAND, the NAND flash must be connected to br/or0. + Also init RAM(L2 SRAM or DDR SDRAM) for load the second image to + it. + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 266139b88b43ae1d87abb5f5431e6f57b801795f +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Tue Sep 22 14:53:34 2009 +0800 + + immap_85xx: add porpllsr's plat ratio definition + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 098bcbae3172d73d24ca8ba196328d901eed4132 +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Tue Sep 22 14:53:10 2009 +0800 + + ppc/85xx: add ld script file for boot from NAND + + The first stage 4K image uses a seperate ld script file to + generate 4K image. This patch moves it to the cpu/mpc85xx/* + to make it avaliable for 85xx platform. + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8439f05cfd8cbb38485376a34d9fe297ba262737 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 23:09:28 2009 -0500 + + mpc8610hpcd: Use common 86xx fdt fixup code + + Using the common 86xx fdt fixups removes some board-specific code and + should make the mpc8610hpcd easier to maintain in the long run. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 928435d11b898870415910efff87a4d6399cecb8 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Mon Sep 21 17:19:17 2009 -0400 + + sbc85x0: tidy up Makefile to use new configuration script. + + Commit 804d83a5 allows us to move all the configuration + variation tweaks out of the top level Makefile and down + into the boards config header. This takes advantage of + that for the sbc8540/sbc8560 boards. + + There were a couple of cheezy comments pointing at incorrect + files, or files that don't exist, so I've cleaned those up too. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 2738bc8df65ec905094d83f62f87fed123a03b9c +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Sun Sep 20 20:36:06 2009 -0400 + + sbc8548: allow enabling PCI via a make config option + + Prior to this commit, to enable PCI, you had to go manually + edit the board config header, and if you had 33MHz PCI, you + had to manually change CONFIG_SYS_NS16550_CLK too, which was + not real user friendly, + + This adds the typical PCI and clock speed make targets to the + toplevel Makefile in accordance with what is being done with + other boards (i.e. using the "-t" to mkconfig). + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit fdc7eb90b504daa020f290604d50da8f7cb70d8a +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Sun Sep 20 20:36:05 2009 -0400 + + sbc8548: update PCI/PCI-e support code + + The PCI/PCI-e support for the sbc8548 was based on an earlier + version of what the MPC8548CDS board was using, and in its + current state it won't even compile. This re-syncs it to match + the latest codebase and makes use of the new shared PCI functions + to reduce board duplication. + + It borrows from the MPC8568MDS, in that it pulls the PCI-e I/O + back to 0xe280_0000 (where PCI2 would be on MPC8548CDS), and + similarly it coalesces the PCI and PCI-e mem into one single TLB. + + Both PCI-x and PCI-e have been tested with intel e1000 cards + under linux (with an accompanying dts change in place) + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a8b3e90f798e0cca5f11c912f9d0823a1c5b6c24 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Sun Sep 20 20:36:01 2009 -0400 + + fsl_pci: create a SET_STD_PCI_INFO() helper wrapper + + Recycle the recently added PCI-e wrapper used to reduce board + duplication of code by creating a similar version for plain PCI. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 11d5a629f8a40f9d7cffc74e58f4e3ed258e56ab +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Sun Sep 20 20:36:04 2009 -0400 + + sbc8548: correct local bus SDRAM size from 64M to 128M + + The size of the LB SDRAM on this board is 128MB, spanning CS3 + and CS4. It was previously only being configured for 64MB on + CS3, since that was what the original codebase of the MPC8548CDS + had. In addition to setting up BR4/OR4, this also adds the TLB + entry for the second half of the SDRAM. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0c7e4d45d9fb3c9e503ee93d50572d346dae150e +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Sun Sep 20 20:36:03 2009 -0400 + + sbc8548: use I/O accessors + + Sweep throught the board specific file and replace the various + register proddings with the equivalent I/O accessors. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit fc38eb98ff226f2c53eecbee033a6ab7619473dc +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Sun Sep 20 20:36:02 2009 -0400 + + sbc8548: remove eTSEC3/4 voltage hack + + With only eTSEC1 and 2 being brought out to RJ-45 connectors, we + aren't interested in the eTSEC3/4 voltage hack on this board + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 9b3ba24f18900633a394416cc056c44a1a6eb754 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Sep 18 19:08:41 2009 -0400 + + sbc8548: enable access to second bank of flash + + The sbc8548 has a 64MB SODIMM flash module off of CS6 that + previously wasn't enumerated by u-boot. There were already + BR6/OR6 settings for it [used by cpu_init_f()] but there + was no TLB entry and it wasn't in the list of flash banks + reported to u-boot. + + The location of the 64MB flash is "pulled back" 8MB from + a 64MB boundary, in order to allow address space for the + 8MB boot flash that is at the end of 32 bit address space. + This means creating two 4MB TLB entries for the 8MB chunk, + and then expanding the original boot flash entry to 64MB + in order to cover the 8MB boot flash and the remainder + (56MB) of the user flash. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ded58f4153923dfff16d2f96495bd7acf1f7e10e +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Wed Sep 23 17:30:57 2009 -0400 + + sbc8548: cosmetic line re-wrap + + Fix the extra long lines to be consistent with u-boot coding style. + No functional change here. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + +commit 2c40acd3525b75db3fcd3f5a5bd40445679b5547 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Sep 18 19:08:40 2009 -0400 + + sbc8548: get_clock_freq is not valid for this board + + The get_clock_freq() comes from freescale/common/cadmus.c and is + only valid for the CDS based 85xx reference platforms. It would + be nice if we could read the 33 vs. 66MHz status somehow, but in + the meantime, tie it to CONFIG_SYS_CLK_FREQ like all the other + non-CDS boards do. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7b1f1399e876587e0a268a5a471dd444bfbc3114 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Sep 18 19:08:39 2009 -0400 + + sbc8548: delete unused MPC8548CDS info carried over from port + + There are a couple defines and PCI bridge quirks related to the PCI + backplane of the MPC8548CDS that have no meaning in the context of + the port to the sbc8548 board, so delete them. + + Also, the form factor of the sbc8548 is a standalone board with a + single PCI-X and a single PCI-e slot. That pretty much guarantees + that it will never be a PCI agent itself, so the host/agent and root + complex/end node distinctions have been removed. + + Similarly, since there is no physical connector mapping to PCI2, so + all references of PCI2 in the board support files have been removed + as well. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 94ca091456d5c3040ddd6351c80cf3e74393f9be +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Sep 18 19:08:44 2009 -0400 + + sbc8548: enable use of PCI network cards + + Create a board_eth_init to allow a place to hook in + the PCI ethernet init after all the eTSEC are up + and configured. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 82b7725b6d46d9ad2b962b4cdfa896bd5ee32fb5 +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Sat Sep 19 17:50:17 2009 +0530 + + ppc/85xx: 32bit DDR changes for P1020/P1011 + + The P1020/P1011 SOCs support max 32bit DDR width as opposed to P2020/P2010 + where max DDR data width supported is 64bit. + + As a next step the DDR data width initialization would be made more dynamic + with more flexibility from the board perspective and user choice. + Going forward we would also remove the hardcodings for platforms with onboard + memories and try to use the FSL SPD code for DDR initialization. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit bd42bbb858dde713f023fc2e4f512ec174a1a8d2 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Sep 18 19:08:46 2009 -0400 + + sbc8548: replace README with completely new document + + The previous README.sbc8548 was pretty much content-free. Replace + it with something that actually gives the end user some relevant + hardware details, and also lists the u-boot configuration choices. + + Also in the cosmetic department, fix the bogus line in the Makefile + that was carried over from the SBC8560 Makefile, and the typo in + the sbc8548.c copyright. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 002741ae862c1c7e3dad89d020e392e6add1c05d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Sat Sep 19 11:20:54 2009 -0500 + + ppc/85xx: Clean up use of LAWAR defines + + On 85xx platforms we shouldn't be using any LAWAR_* defines + but using the LAW_* ones provided by fsl-law.h. Rename any such + uses and limit the LAWAR_ to the 83xx platform as the only user so + we will get compile errors in the future. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f61dae7c9dc526410faec15ce352b11fc36a560b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 3 10:20:09 2009 -0500 + + ppc/85xx: Clean up mpc8572DS PCI setup code + + Use new fsl_pci_init_port() that reduces amount of duplicated code in the + board ports, use IO accessors and clean up printing of status info. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 4958af8735207640181c4423e41b24ee7418361a +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 3 09:42:01 2009 -0500 + + ppc/85xx: Clean up p2020ds PCI setup code + + Use new fsl_pci_init_port() that reduces amount of duplicated code in the + board ports, use IO accessors and clean up printing of status info. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 93a83872c707891bad22f7776d79a650c870601f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 3 10:09:04 2009 -0500 + + ppc/85xx: Clean up p1_p2_rdb PCI setup + + General code cleanup to use in/out IO accessors as well as making + the code that prints out info sane between board and generic fsl pci + code. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 62ca21c442e18fec118ec83e183d64ea49966ce7 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 10 16:31:53 2009 -0500 + + ppc/85xx: Simplify the top makefile for P1_P2_RDB boards + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a0f9e0e0f06033807de0ae017ad4d9cf5ddff84b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 10 16:26:37 2009 -0500 + + ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f9edcc10e6cb497dd7dcbaf691cfd1859abae27a +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 10 16:23:45 2009 -0500 + + ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0e905ac28b1e039d74e63232293972bff6b5a0ce +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Fri Sep 18 11:45:09 2009 +0800 + + ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 202d94875c98b7b573f136c4f353609758ed9733 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Sep 15 22:21:58 2009 -0500 + + ppc/85xx: Fix LCRR_CLKDIV defines + + For some reason the CLKDIV field varies between SoC in how it interprets + the bit values. + + All 83xx and early (e500v1) PQ3 devices support: + clk/2: CLKDIV = 2 + clk/4: CLKDIV = 4 + clk/8: CLKDIV = 8 + + Newer PQ3 (e500v2) and MPC86xx support: + clk/4: CLKDIV = 2 + clk/8: CLKDIV = 4 + clk/16: CLKDIV = 8 + + Ensure that the MPC86xx and MPC85xx still get the same behavior and make + the defines reflect their logical view (not the value of the field). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Peter Tyser <ptyser@xes-inc.com> + +commit 55f786d8ba8ce58a81428536da34a2192b9bad9f +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 12:04:33 2009 -0500 + + MAKEALL: Use POSIX math + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 40a28f0885e62b6607e12ed6baa6284927f5263e +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Mon Sep 21 12:04:32 2009 -0500 + + MAKEALL: Add summary information + + This change adds some basic summary information to the MAKEALL script. + The summary information includes how many boards were compiled, how many + boards had compile warnings or errors, and which specific boards had + compile warnings or errors. + + This information is useful when doing compile testing to quickly + determine which boards are broken. + + As a side benefit, no empty $BOARD.ERR files are generated by MAKEALL. + Previously, each board had a corresponding $BOARD.ERR file, even if the + board compiled cleanly. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 71ce9bd7f551e44c4ddb4c985c095da6d3452d79 +Author: Eric Millbrandt <emillbrandt@coldhaus.com> +Date: Mon Sep 21 11:05:55 2009 -0500 + + galaxy5200: enable version environment variable + + Add version environment variable configuration to the galaxy5200 + board header file. + + Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> + + Edited commit message. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit c569ad6e1e8768a0fec513ffc156412240b7eb35 +Author: Werner Pfister <werner.pfister@intercontrol.de> +Date: Mon Sep 21 14:49:56 2009 +0200 + + digsy_mtc: Add TCR register value for RTC (DS1339) + + Signed-off-by: Werner Pfister <werner.pfister@intercontrol.de> + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit b0078c8792badd81aed51b7eabe85e960036361c +Author: Werner Pfister <werner.pfister@intercontrol.de> +Date: Mon Sep 21 14:49:55 2009 +0200 + + rtc/ds1337.c: Allow to set TCR register + + This is needed to correctly start the charging of an attached capacitor + or battery. + + Signed-off-by: Werner Pfister <werner.pfister@intercontrol.de> + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit 9d7952e4c636b8c99289a44dbe28c6f93c43b9f7 +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Tue Sep 15 09:53:29 2009 +0200 + + ubifs: Add support for looking up directory and relative symlinks + + This patch adds support for resolving symlinks to directories as well as + relative symlinks. Symlinks are now always resolved during file lookup, + so the load stage no longer needs to special-case them. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit fcdb36b85ac033c09a9762a0a14808f7cb2ed54c +Author: Rupjyoti Sarmah <rsarmah@amcc.com> +Date: Mon Sep 21 11:26:19 2009 -0700 + + ppc4xx: Fix PCIE PLL lock on 440SPe Yucca board + + u-boot reports a PCIE PLL lock error at boot time on Yucca board, and + left PCIe nonfunctional. This is fixed by making u-boot function + ppc4xx_init_pcie() to wait 300 uS after negating reset before the + first check of the PLL lock. + + Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 91d599044caac4a8c228115b16cf3b073f902080 +Author: Dirk Eibach <eibach@gdsys.de> +Date: Mon Sep 21 13:27:14 2009 +0200 + + ppc4xx: Make DDR2 timing for intip more robust + + DDR2 timing for intip was on the edge for some of the available chips + for this board. Now it is verfied to work with all of them. + + Signed-off-by: Dirk Eibach <eibach@gdsys.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 184a3a27f5cd2c64666f74df94c86b94c4383ef8 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Sep 15 00:26:02 2009 +0200 + + board/linkstation/ide.c: Fix compile warning + + Fix warning: ide.c:60: warning: dereferencing type-punned pointer will + break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Guennadi Liakhovetski <lg@denx.de> + +commit 004eca0c9ba328de457d5dc9ef8805639dfef893 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Wed Sep 16 22:03:08 2009 -0500 + + ppc: Clean up calling of phy_reset() during init + + Remove board-specific #ifdefs for calling phy_reset() during + initializtion + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 3a8f28d0a6d9f8505017680233064c13e4587174 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Wed Sep 16 22:03:07 2009 -0500 + + ppc: Clean up calling of misc_init_r() during init + + Remove board-specific #ifdefs for calling misc_init_r() during + initializtion + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Acked-by: Heiko Schocher <hs@denx.de> + +commit 3202d33169df04da5cf3dea8c5ab0a902b90ecaa +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Wed Sep 16 21:38:10 2009 -0500 + + Remove deprecated 'autoscr' command/variables + + The more standard 'source' command provides identical functionality to + the autoscr command. + + Environment variable names/values on the MVBC_P, MVBML7, kmeter1, + mgcoge, and km8xx boards are updated to no longer refernce 'autoscr'. + + The 'autoscript' and 'autoscript_uname' environment variables are + also removed. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de> + Acked-by: Heiko Schocher <hs@denx.de> + +commit d3f4941874a20d8a390a36ba71335ae1db2f9ba0 +Author: Paul Gibson <paul.gibson2074@gmail.com> +Date: Wed Sep 16 10:05:00 2009 +1000 + + mpc512x. Micron nand flash needs a reset before a read command is issued. + + Micron nand flash needs a reset before a read command is issued. + The current mpc5121_nfc driver ignores the reset command. + +commit b55ae40249545eabb9d6bfb850b1400a32561b1f +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Wed Sep 9 21:18:41 2009 +0200 + + FDT: remove obsolete OF_CPU and OF_SOC macros. + + Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> + Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + Acked-by: Heiko Schocher <hs@denx.de> + +commit 3b6a9267f0de7b85d387fa4123d0b58379363447 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Sep 15 00:09:21 2009 +0200 + + board/flagadm/flash.c: fix compile warning + + Fix warning: flash.c:531: warning: dereferencing type-punned pointer + will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Kári Davíðsson <kd@flaga.is> + +commit 0413cfecea350000eab5e591a0965c3e3ee0ff00 +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Thu Sep 17 15:15:52 2009 +0200 + + Correct ffs/fls regression for PowerPC etc + + Commits + + 02f99901ed1c9d828e3ea117f94ce2264bf8389e + 52d61227b66d4099b39c8309ab37cb67ee09a405 + + introduced a regression where platform-specific ffs/fls implementations + were defined away. This patch corrects that by using PLATFORM_xxx + instead of the name itself. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Stefan Roese <sr@denx.de> + +commit e67af44d0167d8237dd2c2ddf8e301d19ca12914 +Author: Stefan Roese <sr@denx.de> +Date: Mon Sep 14 11:13:34 2009 +0200 + + ppc4xx: Consolidate get_OPB_freq() + + All 4xx variants had their own, mostly identical get_OPB_freq() + function. Some variants even only had the OPB frequency calculated + in this routine and not supplied the sys_info.freqOPB variable + correctly (e.g. 405EZ). This resulted in incorrect OPB values passed + via the FDT to Linux. + + This patch now removes all those copies and only uses one function + for all 4xx variants (except for IOP480 which doesn't have an OPB). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 84a45d33c2cc261dbd5411f7c2ad45f6003025b6 +Author: Stefan Roese <sr@denx.de> +Date: Fri Sep 11 17:09:45 2009 +0200 + + ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia + + Acadia still used the "old" arch/ppc bootm commands for booting + Linux images without FDT. This patch now enables these fdt-aware + boot commands for Acadia as well. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 95a4a593b577b6e2f1da2d4b0f5ec86975c33413 +Author: Stefan Roese <sr@denx.de> +Date: Fri Sep 11 17:07:55 2009 +0200 + + ppc4xx: Fix 405EZ uart base baud calculation + + With this fix, Linux correctly configures the baudrate when booting + with FDT passed from U-Boot to Linux. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 15fba3279b56333bdb65ead366f82c945ed320d1 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Sep 11 15:28:41 2009 -0500 + + ppc/85xx: Disable all async interrupt sources when we boot + + We should make sure to clear MSR[ME, CE, DE] when we boot an OS image + since we have changed the exception vectors and the OSes vectors might + not be setup we should avoid async interrupts at all costs. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 9f00409a9d04cf533305531da32437130802f3a3 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Sep 11 13:52:45 2009 -0500 + + ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL + + By pulling out cpu_init_early we can build just it and not all of + cpu_init for NAND_SPL. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0456dbf3475d0aec42873a967ac97ed81f376119 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Sep 11 13:41:49 2009 -0500 + + ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL + + Use write_tlb and don't use memset so we can use the same code for + cpu_init_early_f between NAND SPL and not. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 6e1385d5f8d137e741dfef02465d7dc328040ad7 +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Fri Sep 11 10:53:08 2009 +0800 + + NAND boot: change NAND loader's relocate SP to CONFIG param + + So that we can set the NAND loader's relocate stack pointer + to the value other than the relocate address + 0x10000. + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + Acked-by: Scott Wood <scottwood@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7da53351d817c6d77364cfde922891f37d0e5ed8 +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Fri Sep 11 14:19:10 2009 +0800 + + ppc/85xx: add boot from NAND/eSDHC/eSPI support + + The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch + implements these three bootup methods in a unified way - all of these + use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM + which lets us use the SPD to initialize the SDRAM. + + For all three bootup methods, the bootup process can be divided into two + stages: the first stage will initialize the corresponding controller, + configure the L2SRAM, then copy the second stage image to L2SRAM and + jump to it. The second stage image is just like the general U-Boot image + to configure all the hardware and boot up to U-Boot command line. + + When boot from NAND, the eLBC controller will first load the first stage + image to internal 4K RAM buffer because it's also stored on the NAND + flash. The first stage image, also call 4K NAND loader, will initialize + the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K + NAND loader's code comes from the corresponding nand_spl directory, along + with the code twisted by CONFIG_NAND_SPL. + + When boot from eSDHC/eSPI, there's no such a first stage image because + the CPU ROM code does the same work. It will initialize the L2SRAM + according to the config addr/word pairs on the fixed address and + initialize the eSDHC/eSPI controller, then load the second stage image + to L2SRAM and jump to it. + + The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the + second stage image for all different bootup methods. It's set in the + board config file when one of the bootup methods above is selected. + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit b2eec281a811bb52941f61203d8fe35256b3582c +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Sep 11 12:32:01 2009 -0500 + + ppc/85xx: Move code around to prep for NAND_SPL + + If we move some of the functions in tlb.c around we need less + ifdefs. The first stage loader just needs invalidate_tlb and + init_tlbs. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 206af3527c05e520e28d38a48a1d15433e34675d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Sep 11 11:30:30 2009 -0500 + + ppc/85xx: Repack tlb_table to save space + + We can pack the initial tlb_table in MAS register format and use + write_tlb to set things up. This savings can be helpful for NAND + style first stage boot loaders. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit d30f9043539d372cf66406bc2f21bb8c20e67009 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Sep 11 11:27:00 2009 -0500 + + ppc/85xx: Introduce low level write_tlb function + + Factor out the code we use to actually write a tlb entry. + + set_tlb is a logical view of the TLB while write_tlb is a low level + matching the MAS registers. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0ead6f2ed7cf4e1f70dab5b529ad121e38359485 +Author: Roy Zang <tie-fei.zang@freescale.com> +Date: Thu Sep 10 14:44:48 2009 +0800 + + ppc/85xx: Enable usb ehci support for p2020ds board + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 6d8565a1ed5acb01bad4a4cd74a93be5f7fb7f7c +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 10 14:54:55 2009 -0500 + + ppc/8xxx: Misc DDR related fixes + + * Fix setting of ESDMODE (MR1) register - the bit shifting was wrong + * Fix the format string to match size in a debug print + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3e3c9c157b89eab2dc2f897899b1b95cd70c1a58 +Author: Scott Wood <scottwood@freescale.com> +Date: Thu Aug 20 17:45:00 2009 -0500 + + ppc/85xx: Remove some bogus code from external interrupt handler. + + Skipping the interrupted instruction will accomplish nothing other + than turning a spurious interrupt into a crash. + + External interrupts are not machine checks, so don't count them as such. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit dcc87dd58db466caa2d66755c5ec9455edf42fe8 +Author: Scott Wood <scottwood@freescale.com> +Date: Thu Aug 20 17:45:05 2009 -0500 + + ppc/85xx: Ensure that MAS8 is zero when writing TLB entries. + + Its reset value is random, and we sometimes read uninitialized TLB + arrays. Make sure that we don't retain MAS8 from reading such an entry + if the VF bit in MAS8 is set, attempts to use the mapping will trap. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 1b72dbecca2d7ad7a21c92d80227daa2d8ec5a57 +Author: Scott Wood <scottwood@freescale.com> +Date: Thu Aug 20 17:44:20 2009 -0500 + + ppc/85xx: Don't enable interrupts before we're ready + + We cannot handle any exceptions while running in AS1, as the exceptions + will transition back to AS0 without a valid mapping. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 3ca55bce9c8bf00df06a20487fafc16fa2f8084b +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Fri Sep 11 07:50:33 2009 -0400 + + mpc8260: remove Ethernet node fixup to use generic FDT code. + + Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its + configs for the common mpc8260 code to use generic Ethernet fixup. + + Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> + Tested-by: Heiko Schocher <hs@denx.de> + +commit 1c20e4a9fbc531e2149ae061e8583f5fad82f163 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Sep 9 12:20:21 2009 -0400 + + tools/netconsole: use ncb automatically if available + + The standard netcat, while ubiquitous, doesn't handle broadcast udp packets + properly. The local ncb util does however. So if ncb can be located in + the standard locations, automatically use that instead. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 770931805d292908a57a3d2c5f9a4fcde888b5a2 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Sep 9 12:20:20 2009 -0400 + + tools/netconsole: make a bit more robust + + The netcat utility likes to exit when it receives an empty packet (as it + thinks this means EOF). This can easily occur when working with command + line editing as this behavior will be triggered when using backspace. Or + with tabs and command line completion. So create two netcat processes - + one to only listen (and put it into a loop), and one to do the sending. + Once the user quits the transmitting netcat, the listening one will be + killed automatically. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit a6e19d69f63c14b7672c65ca4b014621c6fd0201 +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Mon Aug 24 09:10:16 2009 +0200 + + arm: Define test_and_set_bit and test_and_clear bit for ARM + + Needed for (e.g.) ubifs support to work. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + +commit 52d61227b66d4099b39c8309ab37cb67ee09a405 +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Mon Aug 24 09:10:12 2009 +0200 + + Define ffs/fls for all architectures + + UBIFS requires fls(), which is not defined for arm (and some other + architectures) and this patch adds it. The implementation is taken from + Linux and is generic. ffs() is also defined for those that miss it. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + +commit 4b15de08fe4d2c9d12a3764394731018a763216b +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Mon Aug 24 09:10:03 2009 +0200 + + arm: Make arm bitops endianness-independent + + Bring over the bitop implementations from the Linux + include/asm-generic/bitops/non-atomic.h to provide + endianness-independence. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + +commit 02f99901ed1c9d828e3ea117f94ce2264bf8389e +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Mon Aug 24 09:09:50 2009 +0200 + + Move __set/clear_bit from ubifs.h to bitops.h + + __set_bit and __clear_bit are defined in ubifs.h as well as in + asm/include/bitops.h for some architectures. This patch moves + the generic implementation to include/linux/bitops.h and uses + that unless it's defined by the architecture. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + +commit 557555fe0b82940ba7cc69f81d31d6ef4d4933b4 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Sep 4 19:54:45 2009 -0400 + + standalone: convert to kbuild style + + Clean up the arch/cpu/board/config checks as well as redundant setting of + srec/bin variables by using the kbuild VAR-$(...) style. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 804d83a563c47b55e1f14f5de3b6e9d7e2a7ef5e +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Sep 15 22:12:31 2009 +0200 + + mkconfig: split the board make target to multiple config targets + + To simplify the top level makefile it useful to be able to parse + the top level makefile target to multiple individual target, then + put them to the config.h, leave the board config file to handle + the different targets. + + Note that this method uses the '_'(underline) as the delimiter when + splits the board make target. + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + + This also reverts commit 511c02f611cb5afa1b8ca5980caaaabaa0de377f. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit ceb2d57c2205db5bbd868577f756c74a2568160c +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Sep 15 21:13:27 2009 +0200 + + kwbimage.c: Fix compile warning when building on 64 bit systems (again) + + Commit 51003b89 attempted to fix a build problem on 64 bit systems, + but just turned it into a build problem on 32 bit systems (silly me). + + Now do the Right Thing (TM) and use a "%zu" printf format. + + Also fix spelling error. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6c7bc91fb3dba186d3398a1653f6db236510ffa7 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 11:30:34 2009 +0200 + + board/amcc/common/flash.c: Fix compile warning + + Fix warning: ../common/flash.c:917: warning: dereferencing type-punned + pointer will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Stefan Roese <sr@denx.de> + Acked-by: Stefan Roese <sr@denx.de> + +commit 70fb809c563c340538264d2a9436135e74c38bfe +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 11:47:07 2009 +0200 + + board/amcc/yucca/flash.c: Fix compile warning + + Fix warning: flash.c:919: warning: dereferencing type-punned pointer + will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Stefan Roese <sr@denx.de> + Acked-by: Stefan Roese <sr@denx.de> + +commit 030ec52f8cc83015f968db30208f4bd07feffa6c +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 11:44:39 2009 +0200 + + board/amcc/taihu/flash.c: Fix compile warning + + Fix warnings: + flash.c: In function 'write_word_1': + flash.c:696: warning: dereferencing type-punned pointer will break strict-aliasing rules + flash.c: In function 'write_word_2': + flash.c:1044: warning: dereferencing type-punned pointer will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Stefan Roese <sr@denx.de> + Acked-by: Stefan Roese <sr@denx.de> + +commit 0fd3d902d920f3e60f88530c33f1ae7581260951 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 11:37:20 2009 +0200 + + board/etin/debris/phantom.c: Fix compile error + + Fix build problem caused by commit e84aba13: "Replace BCD2BIN and + BIN2BCD macros with inline functions" + + phantom.c:163: error: redefinition of 'bcd2bin' + /home/wd/git/u-boot/work/include/bcd.h:16: error: previous definition of 'bcd2bin' was here + phantom.c:168: error: redefinition of 'bin2bcd' + /home/wd/git/u-boot/work/include/bcd.h:21: error: previous definition of 'bin2bcd' was here + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Sangmoon Kim <dogoil@etinsys.com> + +commit 5168801f4b71c2f8dcd92a80cfcfda84246e67fe +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 11:28:21 2009 +0200 + + board/dave/common/flash.c: fix compile warning + + Fix warning: ../common/flash.c:668: warning: dereferencing type-punned + pointer will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Andrea Marson <andrea.marson@dave-tech.it> + +commit 97138fc48091f2b063c4e32f36d05854b9d113fb +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 11:15:31 2009 +0200 + + board/esd/cpci750/ide.c: fix compile warning + + Fix warning: ide.c:54: warning: dereferencing type-punned pointer will + break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Cc: Stefan Roese <sr@denx.de> + Acked-by: Stefan Roese <sr@denx.de> + +commit ba73060cf4163bd5eb1711020126e2f7f62d363e +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 10:13:26 2009 +0200 + + board/esd/common/flash.c: Fix compile warning + + Fix warning: ../common/flash.c:635: warning: dereferencing type-punned + pointer will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Cc: Stefan Roese <sr@denx.de> + Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> + Acked-by: Stefan Roese <sr@denx.de> + +commit 2d6d9f0848e952ea33c658dfba335685a2725b8b +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 09:36:31 2009 +0200 + + sk98lin: fix compile warnings + + Fix warnings: + skge.c: In function 'BoardInitMem': + skge.c:1389: warning: dereferencing type-punned pointer will break strict-aliasing rules + skge.c:1390: warning: dereferencing type-punned pointer will break strict-aliasing rules + skge.c:1391: warning: dereferencing type-punned pointer will break strict-aliasing rules + skgesirq.c: In function 'SkGePortCheckUpXmac': + skgesirq.c:1301: warning: dereferencing type-punned pointer will break strict-aliasing rules + skgesirq.c:1301: warning: dereferencing type-punned pointer will break strict-aliasing rules + skgesirq.c:1398: warning: dereferencing type-punned pointer will break strict-aliasing rules + skgesirq.c:1398: warning: dereferencing type-punned pointer will break strict-aliasing rules + skrlmt.c: In function 'SkRlmtInit': + skrlmt.c:661: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c: In function 'SkMacPromiscMode': + skxmac2.c:753: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c:753: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c: In function 'SkMacHashing': + skxmac2.c:803: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c:803: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c: In function 'SkMacFlushTxFifo': + skxmac2.c:1115: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c:1115: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c: In function 'SkMacFlushRxFifo': + skxmac2.c:1145: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c:1145: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c: In function 'SkXmInitPauseMd': + skxmac2.c:1987: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c:1987: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c: In function 'SkXmOverflowStatus': + skxmac2.c:4236: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c:4236: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c:4242: warning: dereferencing type-punned pointer will break strict-aliasing rules + skxmac2.c:4242: warning: dereferencing type-punned pointer will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Ben Warren <biggerbadderben@gmail.com> + +commit 3708e4cdb1f1d3d5128cf87be040d7e6b85f60dd +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 09:13:58 2009 +0200 + + drivers/net/natsemi.c: fix compile warning + + Fix warning: natsemi.c:757: warning: dereferencing type-punned pointer + will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Ben Warren <biggerbadderben@gmail.com> + +commit 78d19a398778a58d7b40b0c78e026515271b1a84 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon Sep 7 09:08:02 2009 +0200 + + net: emaclite: Cleanup license to be GPL compatible + + Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 0900bee9ab9818439b2d1298fa8909a88f74ec0d +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Aug 14 13:41:17 2009 +0200 + + microblaze: Enable hush parser + + With Hush parser is possible to change command line in dtb + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 13916abf996b127b681ddc26664c236ded28ba7f +Author: Michal Simek <monstr@monstr.eu> +Date: Thu Aug 20 22:44:02 2009 +0200 + + microblaze: Remove AtmarkTechno Suzaku board + + Users should use microblaze-generic platform. + This platform is longer not supported. + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 3ceba1d45d007144d10368f91ff9e36f3b5f39a1 +Author: Michal Simek <monstr@monstr.eu> +Date: Thu Aug 20 22:36:20 2009 +0200 + + net: Remove old Xilinx Emac driver + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 2fddd44464d02e0f3ade06dabe0e165835fa61f0 +Author: Michal Simek <monstr@monstr.eu> +Date: Wed Aug 19 08:10:08 2009 +0200 + + microblaze: Short size of global data and fix malloc size + + If is full malloc area global, data are rewrite because + there was bad size of malloc area. + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit aedb4683097d3e5de8833f4a9e34664d3d2bd077 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Aug 14 17:02:35 2009 +0200 + + microblaze: Add sbss, scommon and COMMON symbols for clearing + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 4c1883670acbf1cc83c04df1876235c3aedde128 +Author: Dirk Eibach <eibach@gdsys.de> +Date: Wed Sep 9 12:36:07 2009 +0200 + + ppc4xx: Rename compactcenter to intip + + Signed-off-by: Dirk Eibach <eibach@gdsys.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d1c3b27525b664e8c4db6bb173eed51bfc8220de +Author: Stefan Roese <sr@denx.de> +Date: Wed Sep 9 16:25:29 2009 +0200 + + ppc4xx: Big cleanup of PPC4xx defines + + This patch cleans up multiple issues of the 4xx register (mostly + DCR, SDR, CPR, etc) definitions: + + - Change lower case defines to upper case (plb4_acr -> PLB4_ACR) + - Change the defines to better match the names from the + user's manuals (e.g. cprpllc -> CPR0_PLLC) + - Removal of some unused defines + + Please test this patch intensive on your PPC4xx platform. Even though + I tried not to break anything and tested successfully on multiple + 4xx AMCC platforms, testing on custom platforms is recommended. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d8d8724be06df43772162dc344ae20dfa814dc72 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 09:05:32 2009 +0200 + + net/bootp.c: fix compile warning + + Fix warning: bootp.c:695: warning: dereferencing type-punned pointer + will break strict-aliasing rules + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Ben Warren <biggerbadderben@gmail.com> + +commit 51003b89816848cbe86a8fe48f970ba8b14005f5 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 11 08:58:11 2009 +0200 + + kwbimage.c: Fix compile warning when building on 64 bit systems + + Fix this warning when building on 64 bit systems: + tools/kwbimage.c: In function 'kwbimage_checksum32': + tools/kwbimage.c:135: warning: format '%d' expects type 'int', + but argument 4 has type 'long unsigned int' + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Prafulla Wadaskar <prafulla@marvell.com> + +commit e7963772eb78a6aa1fa65063d64eab3a8626daac +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Wed Sep 9 21:11:18 2009 +0200 + + muas3001: remove BRG clock node fixup to use common mpc8260 code. + + Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> + Acked-by: Heiko Schocher <hs@denx.de> + +commit c7c1dbbf7159b38f3302b845dd97d28a543ff91b +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Wed Sep 9 21:09:00 2009 +0200 + + r7780mp: fix typo in Ethernet chip model number comment. + + Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> + +commit 45f89f340b4d8aa099fd022260dcb13cf3321b61 +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Wed Sep 9 21:22:08 2009 +0200 + + ep8248: add support for device tree and secondary Ethernet interface. + + Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> + +commit aa0c7a86cd236b8193218a09e1365c8991bb5ddc +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Sep 7 15:05:02 2009 +0530 + + mkimage: Add Kirkwood Boot Image support (kwbimage) + + This patch adds support for "kwbimage" (Kirkwood Boot Image) + image types to the mkimage code. + + For details refer to docs/README.kwbimage + + This patch is tested with Sheevaplug board + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + Acked-by: Ron Lee <ron@debian.org> + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + +commit 7809fbb9aafd60e3a6e5dfe456ae30b93ac61338 +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Sep 7 14:59:09 2009 +0530 + + Kirkwood: Sheevaplug: Add kwimage configuration file + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + +commit b029dddc9ae958b1ccf875649f52c6db396a742d +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Sep 7 14:59:08 2009 +0530 + + mkimage: Make table_entry code global + + - make get_table_entry_id() global + - make get_table_entry_name() global + - move struct table_entry to image.h + + Currently this code is used by image.c only. + + This patch makes this API global so it can be used by other parts of + code, too. + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + Acked-by: Ron Lee <ron.debian.org> + + Edit comments and commit message. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f666dea8ab215c76c3c2a077ad299f90dd1ace7c +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Sep 7 14:59:07 2009 +0530 + + mkimage: Make genimg_print_size() global + + Currently it is used by image.c only, but the the function can be + used to support additional mkimage types like for example kwbimage, + so make this function globally visible. + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + + Edited commit message. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 37b801888cf73b18f78c1109140ff44e3e37914f +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Sep 7 14:59:06 2009 +0530 + + mkimage: Include missing files in build dependency calculations + + Include default_image.o and fit_image.o into the build dependency + calculations. This makes sure they get rebuilt if any of the headers + they include are modified + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + Acked-by: Ron Lee <ron@debian.org> + + Edited commit message. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 3a2003f61ee79ac53d20c24cc896c2637a2dfc24 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Aug 19 11:42:56 2009 +0200 + + tools/mkimage: fix compiler warnings, use "const" + + This fixes some compiler warnings: + tools/default_image.c:141: warning: initialization from incompatible pointer type + tools/fit_image.c:202: warning: initialization from incompatible pointer type + and changes to code to use "const" attributes in a few places where + it's appropriate. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 89a4d6b12fd6394898b8a454cbabeaf1cd59bae5 +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Wed Aug 19 17:36:46 2009 +0530 + + tools: mkimage: split code into core, default and FIT image specific + + This is a first step towards reorganizing the mkimage code to make it + easier to add support for additional images types. Current mkimage + code is specific to generating uImage and FIT image files, but the + same framework can be used to generate other image types like + Kirkwood boot images (kwbimage-TBD). For this, the mkimage code gets + reworked: + + Here is the brief plan for the same:- + a) Split mkimage code into core and image specific support + b) Implement callback functions for image specific code + c) Move image type specific code to respective C files + Currently there are two types of file generation/list + supported (i.e uImage, FIT), the code is abstracted from + mkimage.c/.h and put in default_image.c and fit_image.c; + all code in these file is static except init function call + d) mkimage_register API is added to add new image type support + All above is addressed in this patch + e) Add kwbimage type support to this new framework (TBD) + This will be implemented in a following commit. + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + Edit commit message, fix coding style and typos. + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 449609f5b11cce6beba7338bc4ce0f3345376a0b +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Sun Aug 16 05:28:19 2009 +0530 + + tools: mkimage: Fixed build warnings + + uninitialized retval variable warning fixed + crc32 APIs moved to crc.h (newly added) and build warnings fixed + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 14821d7dea8d7209f2457c3179fa6551c088ba71 +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Aug 10 20:44:06 2009 +0530 + + tools: mkimage: Makefile sorted + + The tools/Makefile is sorted for all entries, + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + +commit f7644c0bf3502529031657a869fa213cda5a2424 +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Mon Aug 10 18:49:37 2009 +0530 + + tools: mkimage : bugfix returns correct value for list command + + List command always return "EXIT_SUCCESS" even in case of + failure by any means. + + This patch return 0 if list command is sucessful, + returns negative value reported by check_header functions + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 511c02f611cb5afa1b8ca5980caaaabaa0de377f +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Tue Sep 8 15:07:12 2009 +0800 + + mkconfig: pass the board name to board config file + + Then we can handle different config targets in the board file, which + simplifies the top level Makefile for boards that have multiple + config targets. + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + +commit d640ac58dbf61c769864b3fe76314306b7336cf1 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Sep 7 23:52:31 2009 +0200 + + Remove "atmel_df_pow2" binary with "make clean" + + Commit 65f6f07b added support for the atmel_df_pow2 standalone program + but missed to add a rule to remove it to the "clean" make target. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0b34dbbd0b6969c98c44313b291836d9056ec40a +Author: Stefan Roese <sr@denx.de> +Date: Mon Sep 7 10:52:24 2009 +0200 + + ppc4xx: Fix compilation warning in 4xx miiphy.c + + This patch fixes the following compilation warning: + + miiphy.c: In function 'emac4xx_miiphy_read': + miiphy.c:353: warning: dereferencing type-punned pointer will break + strict-aliasing rules + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 82379b5564819e62624a3c58fbc43f1afedf4f5f +Author: Matthias Fuchs <matthias.fuchs@esd.eu> +Date: Mon Sep 7 17:00:41 2009 +0200 + + ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 99bcf14d553f399148a7660b98f7acbd8cc72d80 +Author: Matthias Fuchs <matthias.fuchs@esd.eu> +Date: Mon Sep 7 17:00:40 2009 +0200 + + ppc4xx: Allow overwriting pci target registers for all 4xx boards + + This patch adds the CONFIG_PCI_4xx_PTM_OVERWRITE option and replaces + the ugly 'if defined(BOARD1) || ... || defined(BOARDn)' construct + in 4xx pci code. + + When CONFIG_PCI_4xx_PTM_OVERWRITE is defined the default ptm register + setup can be overwritten through environment variables ptm1la, ptm1ms, + ptm2la and ptm2ms to do application specific pci target BAR configuration. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cfab2ae322a99ad55364d054054f138f51130c2a +Author: Matthias Fuchs <matthias.fuchs@esd.eu> +Date: Fri Sep 4 10:37:04 2009 +0200 + + ppc4xx: Fix PMC405DE support + + This patch fixes PMC405DE support. Patch 85d6bf0b fixed out-of-tree + building for this board but the loadpci object did not get linked + after that. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c8355b9d9f778bd12ee19c8f34d88e13758a4efd +Author: Detlev Zundel <dzu@denx.de> +Date: Wed Sep 2 17:24:57 2009 +0200 + + amcc-common.h: Use filenames from environment variables for update procedure. + + Using a separate "u-boot" environment variable allows to easily + specify different filenames for the update procedure. This is also in + line with many other board configurations defining an "update" script. + + Signed-off-by: Detlev Zundel <dzu@denx.de> + Acked-by: Wolfgang Denk <wd@denx.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6c97a20d0b2f56cb4f3745d94b1f96986e8cced5 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Sep 9 11:40:41 2009 -0500 + + ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address + + Some board ports place TEXT_BASE at a location that would cause the + RESET_VECTOR_ADDRESS not to be at 0xfffffffc when we link. By default + we assume RESET_VECTOR_ADDRESS will be 0xfffffffc if the board doesn't + explicitly set it. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Wolfgang Denk <wd@denx.de> + +commit c348322ac7f76318295cf25ffab2cc2a4900a234 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Sep 8 13:46:46 2009 -0500 + + ppc/85xx: Clean up do_reset + + There is no reason to do a run time check for e500 v1 based cores to + determine if we have the GUTs RSTCR facility. Only the first generation + of PQ3 parts (MPC8540/41/55/60) do not have it. So checking to see if + we are e500 v2 would miss future parts (like e500mc). + + Just change this to be ifdef'd based on CONFIG_MPC85{40,41,55,60}. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 21170c80a83f1e60ce7f6f83005e06a5c2d15a8e +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Thu Sep 3 19:42:40 2009 +0530 + + ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu(). + + While in probecpu() UART is still not initialized. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f8027f6b4789e3340f10620d8fb6113b95b88d9c +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Wed Sep 2 19:40:36 2009 +0530 + + ppc/85xx/86xx: Device tree fixup for number of cores + + Fixing the number of cores in the device tree based on the actual number of + cores on the system. With this same device tree image can be used for dual + core and single core members of otherwise exactly same SOC. + + For example: + * P2020RDB and P2010RDB + * P1020RDB and P1011RDB + * MPC8641D and MPC8641 + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 58442dc01e47cc8ce42af4f29486a34cad60b9d2 +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Wed Sep 2 13:35:21 2009 +0530 + + ppc/85xx,86xx: Handling Unknown SOC version + + Incase the system is detected with Unknown SVR, let the system boot + with a default value and a proper message. + + Now with dynamic detection of SOC properties from SVR, this is necessary + to prevent a crash. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3e7b6c1f2db5ec31f9e7dbc3e0cbca602167a46a +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Sep 2 09:03:08 2009 -0500 + + ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host + + Refactor the code into a simple bitmask lookup table that determines if + a given PCI controller is enabled and if its in host/root-complex or + agent/end-point mode. + + Each processor in the PQ3/MPC86xx family specified different encodings + for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 5052a771cf1722c37c732f3c340775b55fbe3a22 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Sep 2 09:00:50 2009 -0500 + + ppc/85xx: Cleanup makefile and related optional files + + Cleaned up cpu/mpc85xx/Makefile to use CONFIG_* for those obvious cases + we have like PCI, CPM2, QE. Also reworked it to use one line per file + for everything and sorted in alphabetical order. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 74c5dfd81f94a2a1f0d6990d17c491d718e8b9ea +Author: Timur Tabi <timur@freescale.com> +Date: Fri Sep 4 17:05:24 2009 -0500 + + fsl: add register read-back to set_law() + + After programming a new LAW, we should read-back the LAWAR register so that + we sync the writes. Otherwise, code that attempts to use the new LAW-mapped + memory might fail right away. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit c7259086816405fe0eb77f4dc22e76980a040cef +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 3 08:41:31 2009 -0500 + + ppc/85xx: Fix bug in setup_mp code + + Its possible that we try and copy the boot page code out of flash into a + DDR location that doesn't have a TLB cover it. For example, if we have + 3G of DDR we typically only map the first 2G. In the cases of 4G+ this + wasn't an issue since the reset page TLB mapping covered the last page + of memory which we wanted to copy to. + + We now change the physical address of the reset page TLB to map to the + true physical location of the boot page code, copy and than set the + TLB back to its 1:1 mapping of the reset page. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit c2287af1552bd630956568d3957c370f86801b7d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Sep 3 08:20:24 2009 -0500 + + ppc/85xx: Add a simple function to search the TLB + + Allow us to search the TLB array based on an address. This is useful + if we want to change an entry but dont know where it happens to be + located. + + For example, the boot page mapping we use on MP or the flash TLB that + we change the WIMGE settings for after we've relocated. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 26f4cdba6b51deab4ec99d60be381244068ef950 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Aug 14 13:37:54 2009 -0500 + + 85xx: Add support for setting IVORs to fixed offset defaults + + In future Book-E implementations IVORs will most likely go away and be + replaced with fixed offsets. The IVPR will continue to exist to allow + for relocation of the interrupt vectors. + + This code adds support to setup the IVORs as their fixed offset values + per the ISA 2.06 spec when we transition from u-boot to another OS + either via 'bootm' or a cpu release. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit da1cd955dfec35b0e15381ad1ee248fa194eed82 +Author: Dipen Dudhat <dipen.dudhat@freescale.com> +Date: Wed Sep 2 11:25:08 2009 +0530 + + ppc/85xx: Fix up eSDHC controller clock frequency in the device tree + + Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 2abbd31da6d900473ed678ca50789ee58bc9bb00 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Sep 1 22:01:54 2009 -0500 + + ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist + + The ddr_pd_cntl isn't defined in any reference manual and thus we wil + remove especially since we set it to 0, which would most likely be its + POR value. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 13d46ab2572c0283d34f93bebc9a41295ef84ca5 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Sep 1 21:07:08 2009 -0500 + + ppc/8xxx: relocate cpu pointer in global data + + Now that we have a pointer to the cpu struct we need to relocate it once + we get into ram. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 9c671e7062720074f894ee329eaa6995b0823727 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Sep 2 02:17:24 2009 +0400 + + fsl: sys_eeprom: Fix 'may be used uninitialized' warning + + The warning is bogus, so silence it by initializing the 'ret' variable. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Acked-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 6b9ea08c5010eab5ad1056bc9bf033afb672d9cc +Author: Dipen Dudhat <dipen.dudhat@freescale.com> +Date: Tue Sep 1 17:27:00 2009 +0530 + + ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk + + Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a + platform define. This will enable all the 85xx platforms to use sdhc_clk + based on CONFIG_FSL_ESDHC. + + Signed-off-by: Gao Guanhua <B22826@freescale.com> + Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 92477a631bbda2dc0dd2194e03f9bd3ddb8b9c21 +Author: Timur Tabi <timur@freescale.com> +Date: Fri Sep 4 16:28:35 2009 -0500 + + fsl_i2c: increase I2C timeout values and make them configurable + + The value of I2C_TIMEOUT in fsl_i2c.c has several problems. First, it is + defined as CONFIG_HZ/4, but it is used as a count of microseconds, so it makes + no sense to derive it from a clock rate. Second, the current value (250) is + too low for some boards, so it needs to be increased. Third, the timeout + necessary for multiple-master arbitration is larger than the timeout for basic + read/write operations, so we shouldn't have a single constant for both timeouts. + Finally, it would be nice if we could override these values on a per-board + basis. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Wolfgang Denk <wd@denx.de> + Tested-by: Peter Tyser <ptyser@xes-inc.com> + Acked-by: Peter Tyser <ptyser@xes-inc.com> + +commit 5da71efa18e8b4eac9afd8bfa13e3c7e7ddde1d0 +Author: Eric Millbrandt <emillbrandt@coldhaus.com> +Date: Thu Sep 3 08:09:44 2009 -0500 + + Reset i2c slave devices during init on mpc5xxx cpus + + Reset any i2c devices that may have been interrupted during a system reset. + Normally this would be accomplished by clocking the line until SCL and SDA + are released and then sending a start condtiion (From an Atmel datasheet). + There is no direct access to the i2c pins so instead create start commands + through the i2c interface. Send a start command then delay for the SDA Hold + time, repeat this by disabling/enabling the bus a total of 9 times. + + Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> + +commit 2d4072c06b5549444e4140231bba3d47d9b0bc53 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sat Aug 15 11:20:58 2009 -0400 + + ARM: DaVinci: Adding Support for DaVinci DM365 EVM + + This patch adds support for the DM365 EVM. + It has been tested on a DM365 EVM. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit cf463091bce8b0f8951dd08f94754d08d64793b8 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Sat Aug 15 11:20:44 2009 -0400 + + ARM: DaVinci: DaVinci DM365 SOC specific code + + This patch adds support for DaVinci DM365 SOC. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + +commit e830b66b3592f115316600d370399f3ee148e909 +Author: Ilko Iliev <iliev@ronetix.at> +Date: Sat Sep 5 02:51:34 2009 +0200 + + DM9000 init for pm9261 + + Signed-off-by: Ilko Iliev <iliev@ronetix.at> + +commit c35d7cf071f171bd6bba69f1563a6ac578a18ea6 +Author: Frederik Kriewitz <frederik@kriewitz.eu> +Date: Sun Aug 23 12:56:42 2009 +0200 + + Add support for the DevKit8000 board + + This patch adds support for the DevKit8000 board. + + Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu> + +commit 127f9ae575991aee3e105e1448c49b5b4e254998 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Aug 23 16:32:40 2009 +0200 + + omap3: move the other boards to board/ + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 350f3ac5731faf0f02ca55ab016694b7c7269f97 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Aug 23 16:32:39 2009 +0200 + + arm: move Logicpd's boards to board/logicpd/ + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 0a0e4bad9693ef1d2ca8c33ba551d395a4e3d641 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Aug 23 16:32:38 2009 +0200 + + omap: move TI's boards to board/ti/ + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 9f23ca42b3ba19b24e66fade572f2b86d929b6e8 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Sep 4 23:20:29 2009 +0200 + + ARM: Update mach-types + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 262ae0a6193f10b6a94e86d2f752e7f5510416fa +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Sep 3 23:12:47 2009 -0400 + + push LOAD_ADDR out to arch mk files + + Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in + the standalone Makefile, push the setting up of LOAD_ADDR out to the arch + config.mk (and rename to STANDALONE_LOAD_ADDR in the process). This keeps + the common code clean and lets the arch do whatever crazy crap it wants in + its own area. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 7662eb2b9d6fbc95ecb1fb3e5b5147215e251e7d +Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com> +Date: Thu Sep 3 07:37:46 2009 -0400 + + zlib: fix code when DEBUG is defined + + Removed stdio.h inclusion and moved trace macros to use printf avoiding to + write debug informations to standard error. + + Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> + +commit cfcbf8c4cf3da96b9e3f652506b664bfd766a520 +Author: Scott Wood <scottwood@freescale.com> +Date: Wed Sep 2 16:45:31 2009 -0500 + + mxc_nand: Remove Freescale's "All Rights Reserved." + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 001d615681333569c555e6cde07d8d23e2c536fb +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Sep 2 17:58:48 2009 +0400 + + mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice + + "All Rights Reserved" conflicts with the GPL. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 46ff6d461321f5b565cc790e02679237ffd9a20f +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Sep 2 14:57:27 2009 +0200 + + License cleanup: remove unintended "All Rights Reserved" notices. + + Some files included my old standerd file header which had a "All + Rights Reserved" part. As this has never been my intention, I remove + these lines to make the files compatible with GPL v.2 and later. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 37daa77f3cafb5ec9a974eff3db2af4a0560a9ef +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Sep 2 10:21:20 2009 +0200 + + cmd_mtdparts.c: fix compiler warning in debug code + + Fix warning messages: + cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long + unsigned int', but argument 6 has type 'u32' + cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long + unsigned int', but argument 7 has type 'u32' + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d8bc55a6fb28876abcbf4a3fc3b6c3ce429c1bb3 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Tue Sep 1 20:58:03 2009 +0400 + + Move uninitialized_var() macro from ubi_uboot.h to compiler.h + + This is needed so that we could use this macro for non-UBI code. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit d72871e1387094972569e4b77c25e88020f7b68f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Sep 1 11:24:45 2009 -0500 + + arm: Remove -fno-strict-aliasing + + -fno-strict-aliasing is hidding warnings. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit d6281ff0cc2ebb5d6a5c3e1021837334074f92ec +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Sep 1 11:24:44 2009 -0500 + + ppc: Remove -fno-strict-aliasing + + -fno-strict-aliasing is hidding warnings. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 795d246c278e70b4ba9868cc9f2c8fbada49d388 +Author: Eric Millbrandt <emillbrandt@coldhaus.com> +Date: Fri Aug 28 07:14:04 2009 -0500 + + galaxy5200: Add chip select region for an Epson S1D15313 + + Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> + +commit 3dfad40a0459f63099e177dc15a1df39d048f860 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Aug 27 08:23:55 2009 -0500 + + Add ability for arch code to make changes before we boot + + Added a arch_preboot_os() function that cpu specific code can implement to + allow for various modifications to the state of the machine right before + we boot. This can be useful to setup register state to a specific + configuration. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 9ea005fb4428c922536fa75991ce9972304a02fb +Author: Roy Zang <tie-fei.zang@freescale.com> +Date: Sat Aug 22 03:49:52 2009 +0800 + + Use different PBA value for E1000 PCI and PCIe cards + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + Acked-by: André Schwarz <andre.schwarz@matrix-vision.de> + +commit 5b34a296d47b236dafbcaf1c91ae11b5aeb1ef51 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:58 2009 +1000 + + Add PCI support to eNET board + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit f50b619d9cb297b0125fe78dcd6f255eb0d91659 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:57 2009 +1000 + + i386: Moved PCI from #ifdef to conditional compile for sc520 boards + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit ed7a1b681de1e31d18d5b92e2767ae8df3241687 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:56 2009 +1000 + + i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit 9b32f96b5b92ba13fdb4b5eb637734752235f260 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:55 2009 +1000 + + Misc sc520 cdp fixups + + Now that the PCI, SATA et al compile problems have been resolved, the + cludge that was applied to avoid them can be removed + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit 91ee4e183cb7ac5f86e7673ead51400f19906635 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:54 2009 +1000 + + Fixup sc520_spunk board + + Primary intent is to resolve build errors for this board which has been + neglected for a very long time. I do not have one of these boards, so I + cannot test functionality + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit 8907b8dbc5805094f1316d64737d3428b3863693 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:53 2009 +1000 + + Misc ds1722 fixups + + This patch is based on a patch submitted by Jean-Christophe PLAGNIOL-VILLARD + on 18th May 2008 as part of a general i386 / sc520 fixup which was never + applied + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit a92510e7fae523145b58765cdc46110f1162260d +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:52 2009 +1000 + + Misc ti_pci1410a fixups + + Removed do_pinit() - now declared in cmd_pcmcia.c + + Added #define CONFIG_CMD_PCMCIA around pcmcia_off() in line with other + PCMCIA drivers + + signed/unsigned type fixups + + Added semi-colon after default: label as required by newer gcc + + The only board that appears to use this driver is the sc520_spunk which + is very old and very likely very broken anyway. I do not have one to test + whether this patch breaks anything functionaly, I have can only check + that it compiles without warning or error + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit 31b9ab33d93d88ff89f3046aa45c68667a378a56 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:51 2009 +1000 + + Misc SATA fixups + + Cast first parameter to sata_cpy() + + In /drivers/block/ata_piix.h, ata_id_has_lba48(), ata_id_has_lba(), + ata_id_has_dma(), ata_id_u32(), ata_id_u64() are all defined in + include/libata.h which is included in ata.h which is included by all files + which include ata_piix.h (only ata_piix.c) so these definitions are + supurflous to (and conlict with) this in libata.h. Interestingly, my + compiler complains about ata_id_u64 already being defined, but not + ata_id_u32 + + ata_dump_id() is defined in include/libata.h and should not be static + (maybe should even use ata_dump_id() in libata.c + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit d7549024098af093785151261266a02be19af633 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:50 2009 +1000 + + i386: Misc PCI fixups + + Change PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY (Originally done in + commit ff4e66e93c1a, regressed by commit 6d7f610b09f8) + + Cast PCI_ROM_ADDRESS_MASK to u32 + + Wrap probe_pci_video() call inside #ifdef CONFIG_VIDEO + + Change call to pci_find_class() to pci_find_devices(). This is based on a + patch submitted on 1st March 2007 (Patch that fixes the compilation errors + for sc520_cdp board) by mushtaq_k + + This patch requires that PCI_VIDEO_VENDOR_ID and PCI_VIDEO_DEVICE_ID be + specified in the board config file. Dummy values have been added for the + SC520 CDP board to enable compilation, but since I do not have one of these, + I do know what the values should be + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit 04ff9ab158714d43cdf2f4f6f0235c3ea9d241a2 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:49 2009 +1000 + + Fix sc520 timer interrupt generation + + The current implementation has the timer being started before the interrupt + handler is installed. It the interrupt occurs before the handler is + installed, the timer interrupt is never reset and the timer stops + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit f3a8d6b29b1cd01fdd940e8ff7a62b1df0ebbf82 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:48 2009 +1000 + + Fix environment configuration for eNET board + + The current configuration of the Environment has the redundant copy of the + environment in the Boot Flash - This was never the intent. The Environment + should instead be in the first two sectors of the first Strata Flash + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit ea0c37798c3823fdd77edfffd27b20191f8ca1f0 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:47 2009 +1000 + + i386: Fix regression introduced by commit 8c63d47651f7 + + A local variable was deleted that should not have been + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit cfb3a736ffcff3e3753b902cad536f22fcf8961d +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:46 2009 +1000 + + i386: Change inline asm global symbols to local + + gcc 4.3.2 optimiser creates multiple copies of inline asm (who knows why) + Remove use of global names for labels to prevent 'symbol already defined' + errors + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit a3ab8caee696a1d53fc82fa321e2b2f179970168 +Author: Graeme Russ <graeme.russ@gmail.com> +Date: Sun Aug 23 12:59:45 2009 +1000 + + i386: Add errno.h + + Signed-off-by: Graeme Russ <graeme.russ@gmail.com> + +commit d4e8ada0f6d51e0e3b80790fb9375ac8910f5352 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Aug 21 23:05:21 2009 -0500 + + Consolidate arch-specific mem_malloc_init() implementations + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit a483a167bc8d808145ca1224a2c238cda90aa60c +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Aug 21 23:05:20 2009 -0500 + + Standardize mem_malloc_init() implementation + + This lays the groundwork to allow architectures to share a common + mem_malloc_init(). + + Note that the x86 implementation was not modified as it did not fit the + mold of all other architectures. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 5e93bd1c9aaea886c5e5c7c1b6114ab36c30668f +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Aug 21 23:05:19 2009 -0500 + + Consolidate arch-specific sbrk() implementations + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 65f6f07b72a71b83d775c4d20d7ebcd6b2d2086d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Jul 23 16:37:03 2009 -0400 + + atmel_df_pow2: standalone to convert dataflashes to pow2 + + Atmel DataFlashes by default operate with pages that are slightly bigger + than normal binary sizes (i.e. many are 1056 byte pages rather than 1024 + bytes). However, they also have a "power of 2" mode where the pages show + up with the normal binary size. The latter mode is required in order to + boot with a Blackfin processor, so many people wish to convert their + DataFlashes on their development systems to this mode. This standalone + application does just that. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit cb95c7a935ab9b52dac5d08e5ba4007c5a480f97 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Sep 2 05:52:37 2009 -0400 + + Blackfin: cm-bf548: fix device->stdio_dev fallout + + The recent 52cb4d4fb348 commit which renamed device to stdio_dev missed the + cm-bf548's video board. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit c7bcdde46a7ef78628f0f09fdc6cb61bb1bd7e79 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Sep 2 04:21:16 2009 -0400 + + Blackfin: enable 64bit printf for nand + + Since the NAND code now uses 64bit code, make sure we enable support for + ADI Blackfin boards in printf to avoid the warning: + nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 9c46e71af2b03ccd721c56b1dc906ead702d6fb5 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Aug 24 20:48:04 2009 -0400 + + Blackfin: use scratch pad for exception stack + + If the memory layout pushes the stack out of the default DCPLB coverage, + the exception handler may trigger a double fault by trying to push onto + the uncovered stack. So handle the exception stack similar to the kernel + by using the top of the scratch pad SRAM. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 69a25ce3578f34c8accb476f70089f3a44b78ed9 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Aug 24 20:36:25 2009 -0400 + + Blackfin: increase default console size + + The default console size indirectly applies to length of env vars, so a + smaller length makes it hard to pass longer command lines to kernels. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit f541e1d6d99c22bbd4bc8c84fdb02baad0277847 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Aug 24 19:03:18 2009 -0400 + + Blackfin: fix debug printf modifiers + + The display_global_data() function generated warnings with pretty much + every variable. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 4640c2b8699bcdd2346a2c633486f07f061a2939 +Author: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> +Date: Thu Aug 20 19:20:41 2009 -0400 + + Blackfin: cm-bf537u: new board port + + The CM-BF537U is similar to the CM-BF537E module, but enough to need its + own board port. + + Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit c4db335c2e0805e1ce4c33d278b77492c0812353 +Author: Robin Getz <robin.getz@analog.com> +Date: Mon Aug 17 15:23:02 2009 +0000 + + Blackfin: change global data register from P5 to P3 + + Since the Blackfin ABI favors higher scratch registers by default, use the + last scratch register (P3) for global data rather than the first (P5). + This allows the compiler's register allocator to use higher number scratch + P registers, which in turn better matches the Blackfin instruction set, + which reduces the size of U-Boot by more than 1024 bytes... + + Signed-off-by: Robin Getz <robin.getz@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 574b70df03fba0ea635e2fe71fbd7b97d19b706a +Author: Robin Getz <robin.getz@analog.com> +Date: Tue Aug 11 14:20:13 2009 +0000 + + Blackfin: enable more network commands for ADI dev boards + + Add dns and ntp to default networking commands, and ask for more dhcp + options to better configure the network environment. + + Signed-off-by: Robin Getz <robin.getz@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit aa7b248a05323d4720969227603e39a22777ed95 +Author: Michael Hennerich <michael.hennerich@analog.com> +Date: Thu Jun 18 09:12:50 2009 +0000 + + Blackfin: bf537-stamp: comment CF-Flash Card Support better + + Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 69c6d268a29cf6d61e096d815abf5abf24136f45 +Author: Robin Getz <robin.getz@analog.com> +Date: Fri Jul 10 18:37:15 2009 +0000 + + Blackfin: use +(filesize) to make sure we are only doing what is necessary + + Signed-off-by: Robin Getz <robin.getz@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 2dc851e3b0f07a56f83060f13882ff4b62cf5112 +Author: Albin Tonnerre <albin.tonnerre@free-electrons.com> +Date: Thu Aug 20 16:04:49 2009 +0200 + + Support for the Calao TNY-A9260/TNY-A9G20 boards + + The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by + Calao Systems <http://www.calao-systems.com>. Their components are very + similar to the AT91SAM9260EK board, so their configuration is based on + the configuration of this board. There are however some differences: + different clocks, no LCD, no ethernet. They also can use SPI EEPROM to + store the environment. + + Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 49d2cb4d6153a6c18249dccb5de5cffeb261a61c +Author: Prafulla Wadaskar <prafulla@marvell.com> +Date: Thu Aug 20 20:59:28 2009 +0530 + + arm: Kirkwood: add SYSRSTn Duration Counter Support + + This feature can be used to trigger special command "sysrstcmd" using + reset key long press event and environment variable "sysrstdelay" is set + (useful for reset to factory or manufacturing mode execution) + + Kirkwood SoC implements a hardware-based SYSRSTn duration counter. + When SYSRSTn is asserted low, a SYSRSTn duration counter is running. + The counter value is stored in the SYSRSTn Length Counter Register + The counter is based on the 25-MHz reference clock (40ns) + It is a 29-bit counter, yielding a maximum counting duration of + 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value, + it remains at this value until counter reset is triggered by setting + bit 31 of KW_REG_SYSRST_CNT + + Implementation: + Upon long reset assertion (> ${sysrstdelay} in secs) sysrstcmd will be + executed if pre-defined in environment variables. + This feature will be disabled if "sysrstdelay" variable is unset. + + for-ex. + setenv sysrst_cmd "echo starting factory reset; + nand erase 0xa0000 0x20000; + echo finish ed sysrst command;" + will erase particular nand sector if triggered by this event + + Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> + +commit 9453967e28c5e3abbf856f95735ea69bae1e77fa +Author: Albin Tonnerre <albin.tonnerre@free-electrons.com> +Date: Mon Aug 24 18:03:26 2009 +0200 + + Add support for the Calao SBC35-A9G20 board + + The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems + <http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC + running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard + battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND + flash, two USB host ports, and an USB device port. More informations can be + found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936> + + Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> + +commit 10bc241dfc15a0820d9c52469173b7ccafec0b84 +Author: Ilya Yanok <yanok@emcraft.com> +Date: Tue Aug 11 02:32:09 2009 +0400 + + imx27lite: add support for imx27lite board from LogicPD + + This patch adds support for i.MX27-LITEKIT development board from + LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND + flash, FEC ethernet controller integrated into i.MX27. + + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + Acked-by: Wolfgang Denk <wd@denx.de> + +commit 50b5fff55827946c86a60db8b21a9358be720666 +Author: Albin Tonnerre <albin.tonnerre@free-electrons.com> +Date: Tue Sep 1 11:26:20 2009 +0200 + + at91sam9260/afeb9260: Fix SPI initialization + + Commit 7ebafb7ec1a0285af8380623c009576f92583b98 introduced a mistake in the spi + init function call for those boards. This patch fixes this. + + Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> + +commit f3d4f8870e69e0fd177397778d97d0751bbd020a +Author: Simon Kagstrom <simon.kagstrom@netinsight.net> +Date: Tue Aug 18 11:13:44 2009 +0200 + + Remove duplicate set_cr + + Remove duplicate set_cr + + set_cr is defined in both asm-arm/proc-armv/system.h and + include/asm-arm/system.h. This patch removes it (and some duplicate + defines) from the former. + + Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + +commit 3d35d87d5482de23cd5dc4d7721b1086107cae50 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Aug 31 19:57:42 2009 +0200 + + Prepare 2009.08 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 632a6dd0b612eb7b143f789f2a0273917468c041 Author: Andre Schwarz <andre.schwarz@matrix-vision.de> Date: Mon Aug 31 16:18:24 2009 +0200 @@ -26,6 +5445,385 @@ Date: Sun Aug 30 11:05:29 2009 -0700 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> +commit 2d04db088e6df8a008bb09f604876a45031df93b +Author: Timur Tabi <timur@freescale.com> +Date: Fri Aug 28 16:56:45 2009 -0500 + + fsl: simplify the "mac id" command, improve boot-time informational message + + The "mac id" command took a 4-character parameter as the identifier string. + However, for any given board, only one kind of identifier is acceptable, so it + makes no sense to ask the user to type it in. Instead, if the user enters + "mac id", the identifier (and also the version, if it's NXID) will + automatically be set to the correct value. + + Improve the message that is displayed when EEPROM is read during boot. It now + displays "EEPROM:" and then either an error message or the EEPROM identifier + if successful. + + If the identifier in EEPROM is valid, then always reject a bad CRC, even if the + CRC field has not been initialized. + + Don't force the MAC address count to MAX_NUM_PORTS or less. Forcing the value + to be changed resulting in an in-memory copy that does not match what's in + hardware, even though the user did not request that change. + + Finally, always update the CRC value in the in-memory copy after any field + is changed, so that the CRC is always correct. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 33f3f34255bd7cf0be502275c59f0ff22dc50080 +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Fri Aug 21 07:29:58 2009 +0530 + + 85xx: Added PCIe support for P1 P2 RDB + + Call fsl_pci_init_port() to initialize all the PCIe ports on the board. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0d3d68b25a8e7790f58530ddccbd61f9fc0245ef +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Fri Aug 21 07:29:42 2009 +0530 + + driver/fsl_pci: Add fsl_pci_init_port function to initialize a PCI controller + + fsl_pci_init_port can be called from board specific PCI initialization + routines to setup the PCI (or PCIe) controller. This will reduce code + redundancy in most of the 85xx/86xx FSL board ports that setup PCI. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 05f6f66474312ad03c39b4ca4875af46c87366bf +Author: Timur Tabi <timur@freescale.com> +Date: Thu Aug 20 17:41:11 2009 -0500 + + 85xx: Improve MPIC initialization + + The MPIC initialization code for Freescale e500 CPUs was not using I/O + accessors, and it was not issuing a read-back to the MPIC after setting + mixed mode. This may be the cause of a spurious interrupt on some systems. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit c17b79fbd0c7923948331d65cb588734a9c681ff +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Thu Aug 20 18:59:18 2009 +0530 + + 85xx: Added support for P1011RDB and P2010RDB + + P1011 and P2010 are single core variants of P1010 and P2020 respectively. + The board(RDB) will be same. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a713ba926b45da9a6f923f1ac9e60a66852e5f2d +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Thu Aug 20 18:57:45 2009 +0530 + + 85xx: Added single core members of FSL P1xx/P2xx processors series + + P1011 - Single core variant of P1020 + P2010 - Single core variant of P2020 + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit bf488bc0949fc900d1296a7f35a38a6a28cb5fab +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Thu Aug 20 18:57:02 2009 +0530 + + 85xx: P1020RDB Support Added + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3b1f243b8dad30a646a0f056b0268519eadbc3c5 +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Thu Aug 20 18:55:35 2009 +0530 + + 85xx: Added CONFIG_MAX_CPUS for P1020 + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 76b474e2f5a223fcabfeaa4f1c8fb699062b986c +Author: Mingkai Hu <Mingkai.hu@freescale.com> +Date: Tue Aug 18 15:37:15 2009 +0800 + + 85xx: Add L2SRAM Register's macro definition + + Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 158c6724c99368a4d8eef11ee7e3c7ad0ef03a15 +Author: Felix Radensky <felix@embedded-sol.com> +Date: Sat Aug 15 15:08:37 2009 +0300 + + 85xx: Fix memory test range on MPC8536DS + + With current values of CONFIG_SYS_MEMTEST_START and CONFIG_SYS_MEMTEST_END + memory test hangs if run without arguments. Set them to sane values, so + that all available 512MB of RAM excluding exception vectors at the bottom + and u-boot code and stack at the top can be tested. + + Signed-off-by: Felix Radensky <felix@embedded-sol.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ef41f2a25c554604156b59f5945feadae2f3cb55 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Aug 12 00:10:44 2009 -0500 + + 85xx: Removed BEDBUG support on P1_P2_RDB + + To match all other 85xx platforms we are removing BEDBUG support. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit b560ab85edfb68da653bf2527c390c3e182392a1 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Sat Aug 8 10:42:30 2009 -0500 + + 85xx: Init pci ethernet cards if we enable any on MPC8572DS + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 1bb61b69f7aba4931ede35fdcabd8e5ecad121d7 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Aug 7 13:16:34 2009 -0500 + + xes: Use proper IO access functions + + Also fix some minor whitespace oddities while we're cleaning up + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ec79d33b2c41ee8b6d1354cc0910217b769c5036 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Aug 7 13:00:55 2009 -0500 + + 85xx: Move to a common linker script + + There are really no differences between all the 85xx linker scripts so + we can just move to a single common one. Board code is still able to + override the common one if need be. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 87c7661b42aa7672539b54b51d3d5c4013ec6f6c +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Fri Jul 31 12:08:27 2009 +0530 + + 85xx: Added P1020 Processor Support. + + P1020 is another member of QorIQ series of processors which falls in ULE + category. It is an e500 based dual core SOC. + + Being a scaled down version of P2020 it has following differences: + - 533MHz - 800MHz core frequency. + - 256Kbyte L2 cache + - Ethernet controllers with classification capabilities. + Also the SOC is pin compatible with P2020 + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 728ece343e8bb2a66ee977c49d455439e3b28da9 +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Wed Aug 5 13:29:24 2009 +0530 + + 85xx: Add support for P2020RDB board + + The code base adds P1 & P2 RDB platforms support. + The folder and file names can cater to future SOCs of P1/P2 family. + P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series. + + Tested following on P2020RDB: + 1. eTSECs + 2. DDR, NAND, NOR, I2C. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0e870980a64584a591af775bb9c9fe9450124df9 +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Fri Jul 31 12:08:14 2009 +0530 + + 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx + + The number of CPUs are getting detected dynamically by checking the + processor SVR value. Also removed CONFIG_NUM_CPUS references from all + the platforms with 85xx/86xx processors. + + This can help to use the same u-boot image across the platforms. + + Also revamped and corrected few Freescale Copyright messages. + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 18bacc2027f8531d8dec15ba8da3242dfb4e63f3 +Author: Poonam Aggrwal <poonam.aggrwal@freescale.com> +Date: Fri Jul 31 12:07:45 2009 +0530 + + 8xxx: Refactored common cpu specific code for 85xx/86xx into one file. + + Removed same code pieces from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c + and moved to cpu/mpc8xxx/cpu.c(new file) + + Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7b18c227b847e4782eb1492219ebd555f521b08b +Author: Alex Dubov <oakad@yahoo.com> +Date: Fri Aug 7 15:28:32 2009 +1000 + + stx: create common vendor/board hierarchy for STx boards + + Move files belonging to the STx boards into common vendor directory and + update the Makefile to reflect this. + + Signed-off-by: Alex Dubov <oakad@yahoo.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit bafdf9aa9dbb69d937b72db17ed5800998c59523 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Aug 4 17:38:00 2009 -0500 + + 85xx: Remove unused CONFIG_CLEAR_LAW0 defines + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 73aacc522849486b60a5611f678f0bf1c3053779 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Aug 6 18:38:43 2009 -0500 + + 86xx: Remove redudant PLATFORM_CPPFLAGS + + For historic reasons we had defined some additional PLATFORM_CPPFLAGS like: + + PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 + PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 + + However these are all captured in the config.h and thus redudant. Also + moved common 86xx flags into cpu/mpc86xx/config.mk. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 53efa1f1acacacb76fa9a21b09b3294783a11c03 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Aug 6 18:28:34 2009 -0500 + + 85xx: Remove redudant PLATFORM_CPPFLAGS + + For historic reasons we had defined some additional PLATFORM_CPPFLAGS + like: + + PLATFORM_CPPFLAGS += -DCONFIG_E500=1 + PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 + PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1 + + However these are all captured in the config.h and thus redudant. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 337f9fde2e9317c1d9e85a4a8955a2f14730a00f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jul 30 15:54:07 2009 -0500 + + 85xx: Add a 36-bit physical configuration for MPC8536DS + + We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary + to allow for larger memory sizes. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Wolfgang Denk <wd@denx.de> + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ecead84d56b0ced67b727f5ce21ba08c53b5f09e +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Aug 4 09:10:03 2009 -0500 + + 85xx: Cleanup whitespace in mpc8536ds.c + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ad19e7a5d2de337064ce7728d6504df9648f5d31 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Aug 5 07:59:35 2009 -0500 + + pci/fsl_pci_init: Rework PCI ATMU setup to handle >4G of memory + + The old PCI ATMU setup code would just mimic the PCI regions into the + ATMU registers. For simple memory maps in which all memory, MMIO, etc + space fit into 4G this works ok. However there are issues with we have + >4G of memory as we know can't access all of memory and we need to + ensure that PCICSRBAR (PEXCSRBAR on PCIe) isn't overlapping with + anything since we can't turn it off. + + We first setup outbound windows based on what the board code setup + in the pci regions for MMIO and IO access. Next we place PCICSRBAR + below the MMIO window. After which we try to setup the inbound windows + to map as much of memory as possible. + + On PCIe based controllers we are able to overmap the ATMU setup since + RX & TX links are separate but report the proper amount of inbound + address space to the region tracking to ensure there is no overlap. + + On PCI based controllers we use as many inbound windows as available to + map as much of the memory as possible. + + Additionally we changed all the CCSR register access to use proper IO + accessor functions. Also had to add CONFIG_SYS_CCSRBAR_PHYS to some + 86xx platforms that didn't have it defined. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8295b94400449586505ffe34ec024feb3d2c8fe4 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Aug 5 07:49:27 2009 -0500 + + pci/fsl_pci_init: Use PCIe capability to determine if controller is PCIe + + Change the code to use the PCIe capabilities register to determine if we + are a PCIe controller or not. Additionally cleaned up some white space + and formatting in the file. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit cb151aa2cf5fbb1e412fc763a3a611758f066238 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Aug 3 21:02:02 2009 -0500 + + pci/fsl_pci_init: Fold fsl_pci_setup_inbound_windows into fsl_pci_init + + Every platform that calls fsl_pci_init calls fsl_pci_setup_inbound_windows + before it calls fsl_pci_init. There isn't any reason to just call it + from fsl_pci_init and simplify things a bit. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit fb3143b35eb5890ec72e79d17a6068a84a057d47 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Aug 3 20:44:55 2009 -0500 + + pci/fsl_pci_init: Fold pci_setup_indirect into fsl_pci_init + + Every platform that calls fsl_pci_init calls pci_setup_indirect before + it calls fsl_pci_init. There isn't any reason to just call it from + fsl_pci_init and simplify things a bit. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + commit 28887d831b02c66ccc10d7f1379204b5a62f4543 Author: André Schwarz <andre.schwarz@matrix-vision.de> Date: Thu Aug 27 14:48:35 2009 +0200 @@ -59,6 +5857,283 @@ Date: Wed Aug 26 21:25:46 2009 -0500 Signed-off-by: Kim Phillips <kim.phillips@freescale.com> +commit 77b351cd0f20483eefa09bebebb3e0cbf5555b2c +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Tue Aug 18 10:10:42 2009 -0400 + + NAND: DaVinci: V2 Adding 4 BIT ECC support + + This patch adds 4 BIT ECC support in the DaVinci NAND + driver. Tested on both the DM355 and DM365. + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit f83b7f9e8a5d1334e24506ea5953dd871596ea8a +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Mon Aug 10 13:27:56 2009 -0400 + + MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST + + This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to + support 4-bit ECC on TI DaVinci devices with large page (up to 2K) NAND + chips. This ECC mode is similar to NAND_ECC_HW, with the exception of + read_page API that first reads the OOB area, reads the data in chunks, + feeds the ECC from OOB area to the ECC hw engine and perform any + correction on the data as per the ECC status reported by the engine. + + This patch has been accepted by Andrew Morton and can be found at + + http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-new-ecc-mode-ecc_hw_oob_first.patch + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 36fab997d85d89ee7fd2c7fd6057fab786d556aa +Author: Ilya Yanok <yanok@emcraft.com> +Date: Tue Aug 11 02:32:54 2009 +0400 + + mxc_nand: add nand driver for MX2/MX3 + + Driver for NFC NAND controller found on Freescale's MX2 and MX3 + processors. Ported from Linux. Tested only with i.MX27 but should + works with other MX2 and MX3 processors too. + + Signed-off-by: Ilya Yanok <yanok@emcraft.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit a2c65b47effcb3d0aa23e58596538acd338ac7c5 +Author: Sandeep Paulraj <s-paulraj@ti.com> +Date: Mon Aug 10 13:27:46 2009 -0400 + + NAND: ADD page Parameter to all read_page/read_page_raw API's + + This patch adds a new "page" parameter to all NAND read_page/read_page_raw + APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the + page information to send the READOOB command and read the OOB area before + the data area. + + This patch has been accepted by Andrew Morton and can be found at + http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-page-parameter-to-all-read_page-read_page_raw-apis.patch + + WE would like this to become part of the u-boot GIT as well + + Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> + Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit de4250929f37e6c16860741b74546bedbe0bdaba +Author: Heiko Schocher <hs@denx.de> +Date: Tue Jul 21 17:13:40 2009 +0200 + + 83xx, kmeter1: added NAND support + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit ecad289fc6bd9d89ef4d5093cc7b6fd712fd0d29 +Author: Kyungmin Park <kmpark@infradead.org> +Date: Tue Jul 21 11:58:04 2009 +0900 + + OneNAND: Remove unused read_spareram + + Remove unused read_spareram and add unlock_all as kernel does + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 403ce1f759b5acec8514cd7e10ce76704fed519c +Author: Matthias Kaehlcke <matthias@kaehlcke.net> +Date: Thu Jul 16 21:19:29 2009 +0200 + + KB9202: Add NAND support + + Add KB9202 NAND driver + + Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit ce3277a6f2c082f39596d3d3d88dd0a5bc91439d +Author: Kyungmin Park <kmpark@infradead.org> +Date: Tue Jul 21 11:58:04 2009 +0900 + + OneNAND: Remove unused read_spareram + + Remove unused read_spareram and add unlock_all as kernel does + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit 0d042037b3cf8693ea0f793d0c292430bfc5a95c +Author: Eric Millbrandt <emillbrandt@coldhaus.com> +Date: Tue Aug 25 10:30:26 2009 -0500 + + galaxy5200: Cleanup typo and trailing whitespace + + Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> + +commit f6a309080b2da9e509b5ee8d091dca5e175415b7 +Author: TsiChung Liew <tsicliew@gmail.com> +Date: Wed Jul 22 18:42:45 2009 +0000 + + ColdFire: Fix compile warning messages + + Change %08lX to %08X in board.c. Remove unused variable + 'oscillator' in mcf5227x/cpu_init.c and 'scm2' in + mcf532x/cpu_init.c. Provide argument type cast in + drivers/dma/MCD_dmaApi.c. + + Signed-off-by: TsiChung Liew <tsicliew@gmail.com> + +commit 88c811b153771a3d1bfe958297c69722efb278e9 +Author: TsiChung Liew <tsicliew@gmail.com> +Date: Wed Jul 22 16:32:39 2009 +0000 + + ColdFire: Fix missing _IO_BASE which caused compile error + + The compile error was caused by a recent patch. Affected platforms - + M5253DEMO.h, M5253EVBE.h, and M54455EVB.h. Adding the _IO_BASE + automatically defined to 0 in asm-m68k/io.h if it isn't set in + platform configuration file. + + Signed-off-by: TsiChung Liew <tsicliew@gmail.com> + +commit 3a7b2c21fb08b022e3e624cd071002b4aaed1606 +Author: Niklaus Giger <niklaus.giger@member.fsf.org> +Date: Wed Jul 22 17:13:24 2009 +0200 + + Support up to 7 banks for ids as specified in JEDEC JEP106Z + + see http://www.jedec.org/download/search/jep106Z.pdf + Add some second source legacy flash chips 256x8. + + Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0d071cdd782e917b43e04869843df31670231ffd +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Mon Aug 24 14:32:26 2009 -0500 + + net: tsec - handle user interrupt while waiting for PHY auto negotiation to complete + + if you don't have firmware installed for the PHY to come to life, this + wait can be painful - let's give the option to avoid it if we want. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 4fccb818e7ee1190602e79aa5729a23bc349bf0c +Author: Robin Getz <rgetz@blackfin.uclinux.org> +Date: Thu Aug 20 10:50:20 2009 -0400 + + Add Transfer Size Option to tftp + + Optionally add RFC 2349 "Transfer Size Option", so we can minimize the + time spent sending data over the UART (now print a single line during a + tftp transfer). + + - If turned on (CONFIG_TFTP_TSIZE), U-Boot asks for the size of the file. + - if receives the file size, a single line (50 chars) are printed. + one hash mark == 2% of the file downloaded. + - if it doesn't receive the file size (the server doesn't support RFC + 2349, prints standard hash marks (one mark for each UDP frame). + + Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 488feef85229c08cd3aa1fa183bc8f483d2ae832 +Author: Robin Getz <rgetz@blackfin.uclinux.org> +Date: Mon Aug 24 10:33:39 2009 -0400 + + Add debug message for Blackfin Ethernet Rx function. + + Add a simple print for the Blackfin's Ethernet Rx function, + so we can debug incomming Ethernet functions easier. + + Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit b1c0eaac110bc919e5b4e88821348e714493f266 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Tue Aug 25 13:09:37 2009 -0700 + + Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API + + All in-tree boards that use this controller have CONFIG_NET_MULTI added + Also: + - changed CONFIG_DRIVER_CS8900 to CONFIG_CS8900 + - changed CS8900_BASE to CONFIG_CS8900_BASE + - changed CS8900_BUS?? to CONFIG_CS8900_BUS?? + - cleaned up line lengths + - modified VCMA9 command function that accesses the device + - removed MAC address initialization from lib_arm/board.c + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Tested-by: Wolfgang Denk <wd@denx.de> + Acked-by: Wolfgang Denk <wd@denx.de> + +commit d47628a6ecf80cd4584a50b6c795b90c985a48e5 +Author: Alessandro Rubini <rubini-list@gnudd.com> +Date: Fri Aug 7 13:59:26 2009 +0200 + + arm nomadik: activate defrag choose 4k transfer block size + + This chooses 4kB data size for both TFTP and NFS, as an example + about how to use support for IP fragments. + + Signed-off-by: Alessandro Rubini <rubini@gnudd.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit bd931ca61c84039241d438ade4a9755ae0e5372f +Author: Alessandro Rubini <rubini-list@gnudd.com> +Date: Fri Aug 7 13:59:16 2009 +0200 + + nfs: accept CONFIG_NFS_READ_SIZE from config file + + To take advantage of defragmented packets, the config file + can define CONFIG_NFS_READ_SIZE to override the 1kB default. + No support is there for an environment variable by now. + + Signed-off-by: Alessandro Rubini <rubini@gnudd.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 89ba81d1079a07b8430a98c1746c6d411312eb0d +Author: Alessandro Rubini <rubini-list@gnudd.com> +Date: Fri Aug 7 13:59:06 2009 +0200 + + tftp: get the tftp block size from config file and from the environment + + Increasing the block size is useful if CONFIG_IP_DEFRAG is + used. Howerver, the last fragments in a burst may overflow the + receiving ethernet, so the default is left at 1468, with thre new + CONFIG_TFTP_BLOCKSIZE for config files. Further, "tftpblocksize" + can be set in the environment. + + Signed-off-by: Alessandro Rubini <rubini@gnudd.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 5cfaa4e54d0eb8232fa1cf092d955fdaed5b673d +Author: Alessandro Rubini <rubini-list@gnudd.com> +Date: Fri Aug 7 13:58:56 2009 +0200 + + net: defragment IP packets + + The defragmenting code is enabled by CONFIG_IP_DEFRAG; the code is + useful for TFTP and NFS transfers. The user can specify the maximum + defragmented payload as CONFIG_NET_MAXDEFRAG (default 16k). + Since NFS has a bigger per-packet overhead than TFTP, the static + reassembly buffer can hold CONFIG_NET_MAXDEFRAG + the NFS overhead. + + The packet buffer is used as an array of "hole" structures, acting as + a double-linked list. Each new fragment can split a hole in two, + reduce a hole or fill a hole. No support is there for a fragment + overlapping two diffrent holes (i.e., thre new fragment is across an + already-received fragment). + + Signed-off-by: Alessandro Rubini <rubini@gnudd.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + commit 68e74567cf317318df52dbcb2ac170ffc5e7758a Author: Feng Kan <fkan@amcc.com> Date: Fri Aug 21 10:59:42 2009 -0700 @@ -89,6 +6164,93 @@ Date: Fri Aug 21 10:59:42 2009 -0700 Acked-by: Prodyut Hazarika <phazarika@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de> +commit 307ecb6db04eebdc06b8c87d48bf48d3cbd5e9d7 +Author: Eric Millbrandt <emillbrandt@coldhaus.com> +Date: Thu Aug 13 08:32:37 2009 -0500 + + Add support for USB on PSC3 for the mpc5200 + + Support USB on PSC3 on the mpc5200. Before this patch, enabling USB support + would reconfigure PSC4 and PSC5 to USB. The mpc5200 does not support USB + enabled on both the standard USB port and PSC3. This patch masks the + appropriate bits when enabling USB. + + Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + Acked-by: Remy Bohmer <linux@bohmer.net> + +commit 6b8548b0f7068379ad1efa4fa28725f361b2d3cd +Author: Albin Tonnerre <albin.tonnerre@free-electrons.com> +Date: Thu Aug 13 19:12:44 2009 +0200 + + Add driver for the ST M41T94 SPI RTC + + This RTC is used in some Calao boards. The driver code is taken from + the linux rtc-m41t94 driver + + Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> + +commit 885fc78c28fbe773bcb4edc9dd0fdac05ebb5b38 +Author: Albin Tonnerre <albin.tonnerre@free-electrons.com> +Date: Thu Aug 13 15:31:12 2009 +0200 + + Switch from per-driver to common definition of bin2bcd and bcd2bin + + Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit e84aba135ed7145299304ef550e92f08b2c99d7a +Author: Albin Tonnerre <albin.tonnerre@free-electrons.com> +Date: Thu Aug 13 15:31:11 2009 +0200 + + Replace BCD2BIN and BIN2BCD macros with inline functions + + In the process, also remove backward-compatiblity macros BIN_TO_BCD and + BCD_TO_BIN and update the sole board using them to use the new bin2bcd + and bcd2bin instead + + Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> + Acked-by: Stefan Roese <sr@denx.de> + Acked-by: Detlev Zundel <dzu@denx.de> + +commit 5b53b29bc2e82b80b669f1d2402068c60d7fecd0 +Author: Eric Millbrandt <emillbrandt@coldhaus.com> +Date: Thu Aug 13 10:14:21 2009 -0500 + + Add support for the galaxy5200 + + Add support for the DEKA Research and Development galaxy5200 board + + The galaxy5200 is an Freescale mpc5200 based embedded industrial + control board. + + Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> + +commit 0a9e4e772123fe3e2bb499d7d2160c4cfd8a3a8d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Jul 24 16:34:32 2009 -0400 + + unify {CONFIG_,}ENV_IS_EMBEDDED + + Some boards have fallen out of sync by defining CONFIG_ENV_IS_EMBEDDED + manually. While it is useful to have this available to the build system, + let's do it automatically rather than forcing people to opt into it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 02c9aa1d41f73fdcf8383a36cc0cbbfaf952855d +Author: Robin Getz <rgetz@blackfin.uclinux.org> +Date: Mon Jul 27 00:07:59 2009 -0400 + + Add md5sum and sha1 commands... + + Now that we have sha1 and md5 in lib_generic, allow people to use + them on the command line, for checking downloaded files. + + Signed-off-by: Robin Getz <rgetz@analog.com> + commit 30fc5cd3116cb112d0aab7e6d7c8eef1b67ed075 Author: Wolfgang Denk <wd@denx.de> Date: Tue Aug 25 12:22:38 2009 +0200 @@ -22,9 +22,9 @@ # VERSION = 2009 -PATCHLEVEL = 08 +PATCHLEVEL = 11 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c index 9605818..ac3b282 100644 --- a/board/davinci/dm6467evm/dm6467evm.c +++ b/board/davinci/dm6467evm/dm6467evm.c @@ -28,4 +28,3 @@ int board_init(void) return 0; } - diff --git a/board/ep8248/ep8248.c b/board/ep8248/ep8248.c index 57d39aa..5908943 100644 --- a/board/ep8248/ep8248.c +++ b/board/ep8248/ep8248.c @@ -268,4 +268,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup( blob, bd); } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ - diff --git a/board/logicpd/imx27lite/Makefile b/board/logicpd/imx27lite/Makefile index c404cef..04dc8ae 100644 --- a/board/logicpd/imx27lite/Makefile +++ b/board/logicpd/imx27lite/Makefile @@ -48,4 +48,3 @@ include $(SRCTREE)/rules.mk sinclude $(obj).depend ######################################################################### - diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c index 808371f..da05c55 100644 --- a/cpu/arm926ejs/mx27/generic.c +++ b/cpu/arm926ejs/mx27/generic.c @@ -328,4 +328,3 @@ void mx27_sd2_init_pins(void) } #endif /* CONFIG_MXC_MMC */ - diff --git a/cpu/arm_cortexa8/start.S b/cpu/arm_cortexa8/start.S index 14a9bd3..29dae2f 100644 --- a/cpu/arm_cortexa8/start.S +++ b/cpu/arm_cortexa8/start.S @@ -414,4 +414,3 @@ fiq: bl do_fiq #endif - diff --git a/cpu/mpc85xx/fixed_ivor.S b/cpu/mpc85xx/fixed_ivor.S index dc725c9..320cae3 100644 --- a/cpu/mpc85xx/fixed_ivor.S +++ b/cpu/mpc85xx/fixed_ivor.S @@ -35,22 +35,22 @@ li r3,vector_offset@l; \ mtspr SPRN_GIVOR##vector_number,r3; - SET_IVOR(0, 0x020) /* Critical Input */ - SET_IVOR(1, 0x000) /* Machine Check */ - SET_IVOR(2, 0x060) /* Data Storage */ - SET_IVOR(3, 0x080) /* Instruction Storage */ - SET_IVOR(4, 0x0a0) /* External Input */ - SET_IVOR(5, 0x0c0) /* Alignment */ - SET_IVOR(6, 0x0e0) /* Program */ - SET_IVOR(7, 0x100) /* FP Unavailable */ - SET_IVOR(8, 0x120) /* System Call */ - SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ - SET_IVOR(10, 0x160) /* Decrementer */ - SET_IVOR(11, 0x180) /* Fixed Interval Timer */ - SET_IVOR(12, 0x1a0) /* Watchdog Timer */ - SET_IVOR(13, 0x1c0) /* Data TLB Error */ - SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ - SET_IVOR(15, 0x040) /* Debug */ + SET_IVOR(0, 0x020) /* Critical Input */ + SET_IVOR(1, 0x000) /* Machine Check */ + SET_IVOR(2, 0x060) /* Data Storage */ + SET_IVOR(3, 0x080) /* Instruction Storage */ + SET_IVOR(4, 0x0a0) /* External Input */ + SET_IVOR(5, 0x0c0) /* Alignment */ + SET_IVOR(6, 0x0e0) /* Program */ + SET_IVOR(7, 0x100) /* FP Unavailable */ + SET_IVOR(8, 0x120) /* System Call */ + SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ + SET_IVOR(10, 0x160) /* Decrementer */ + SET_IVOR(11, 0x180) /* Fixed Interval Timer */ + SET_IVOR(12, 0x1a0) /* Watchdog Timer */ + SET_IVOR(13, 0x1c0) /* Data TLB Error */ + SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ + SET_IVOR(15, 0x040) /* Debug */ /* e500v1 & e500v2 only */ #ifndef CONFIG_E500MC @@ -59,21 +59,21 @@ SET_IVOR(34, 0x240) /* Embedded FP Round */ #endif - SET_IVOR(35, 0x260) /* Performance monitor */ + SET_IVOR(35, 0x260) /* Performance monitor */ /* e500mc only */ #ifdef CONFIG_E500MC - SET_IVOR(36, 0x280) /* Processor doorbell */ - SET_IVOR(37, 0x2a0) /* Processor doorbell critical */ - SET_IVOR(38, 0x2c0) /* Guest Processor doorbell */ - SET_IVOR(39, 0x2e0) /* Guest Processor critical & machine check */ - SET_IVOR(40, 0x300) /* Hypervisor system call */ - SET_IVOR(41, 0x320) /* Hypervisor Priviledge */ + SET_IVOR(36, 0x280) /* Processor doorbell */ + SET_IVOR(37, 0x2a0) /* Processor doorbell critical */ + SET_IVOR(38, 0x2c0) /* Guest Processor doorbell */ + SET_IVOR(39, 0x2e0) /* Guest Processor critical & machine check */ + SET_IVOR(40, 0x300) /* Hypervisor system call */ + SET_IVOR(41, 0x320) /* Hypervisor Priviledge */ - SET_GIVOR(2, 0x060) /* Guest Data Storage */ - SET_GIVOR(3, 0x080) /* Guest Instruction Storage */ - SET_GIVOR(4, 0x0a0) /* Guest External Input */ - SET_GIVOR(8, 0x120) /* Guest System Call */ - SET_GIVOR(13, 0x1c0) /* Guest Data TLB Error */ - SET_GIVOR(14, 0x1e0) /* Guest Instruction TLB Error */ + SET_GIVOR(2, 0x060) /* Guest Data Storage */ + SET_GIVOR(3, 0x080) /* Guest Instruction Storage */ + SET_GIVOR(4, 0x0a0) /* Guest External Input */ + SET_GIVOR(8, 0x120) /* Guest System Call */ + SET_GIVOR(13, 0x1c0) /* Guest Data TLB Error */ + SET_GIVOR(14, 0x1e0) /* Guest Instruction TLB Error */ #endif diff --git a/doc/README.bitbangMII b/doc/README.bitbangMII index edd0856..0a2fa48 100644 --- a/doc/README.bitbangMII +++ b/doc/README.bitbangMII @@ -6,7 +6,7 @@ buses are implemented via bit-banging mode. The driver requires that the following macros should be defined into the board configuration file: -CONFIG_BITBANGMII - Enable the miiphybb driver +CONFIG_BITBANGMII - Enable the miiphybb driver CONFIG_BITBANGMII_MULTI - Enable the multi bus support If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs @@ -19,7 +19,7 @@ MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin MDIO_READ - Read the MDIO pin MDIO(v) - Write v on the MDIO pin MDC_DECLARE - Declaration needed to access to the MDC pin (optional) -MDC(v) - Write v on the MDC pin +MDC(v) - Write v on the MDC pin The previous macros make the driver compatible with the previous version (that didn't support the multi-bus). @@ -30,17 +30,17 @@ the bb_miiphy_buses_num variable with the number of mii buses. The record (struct bb_miiphy_bus) has the following fields/callbacks (see miiphy.h for details): -char name[] - The symbolic name that must be equal to the MII bus - registered name -int (*init)() - Initialization function called at startup time (just - before the Ethernet initialization) +char name[] - The symbolic name that must be equal to the MII bus + registered name +int (*init)() - Initialization function called at startup time (just + before the Ethernet initialization) int (*mdio_active)() - Activate the MDIO pin as output int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin int (*set_mdio)() - Write the MDIO pin int (*get_mdio)() - Read the MDIO pin int (*set_mdc)() - Write the MDC pin -int (*delay)() - Delay function -void *priv - Private data used by board specific code +int (*delay)() - Delay function +void *priv - Private data used by board specific code The board code will look like: @@ -50,7 +50,7 @@ struct bb_miiphy_bus bb_miiphy_buses[] = { ... }; int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / - sizeof(bb_miiphy_buses[0]); + sizeof(bb_miiphy_buses[0]); 2009 Industrie Dial Face S.p.A. Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> diff --git a/doc/README.drivers.eth b/doc/README.drivers.eth index e06d3ad..e73e462 100644 --- a/doc/README.drivers.eth +++ b/doc/README.drivers.eth @@ -88,7 +88,7 @@ The return value for this function should be as follows: < 0 - failure (hardware failure, not probe failure) >=0 - number of interfaces detected -You might notice that many drivers seem to use xxx_initialize() rather than +You might notice that many drivers seem to use xxx_initialize() rather than xxx_register(). This is the old naming convention and should be avoided as it causes confusion with the driver-specific init function. diff --git a/doc/README.kwbimage b/doc/README.kwbimage index 2a5b3b3..6dd942f 100644 --- a/doc/README.kwbimage +++ b/doc/README.kwbimage @@ -17,12 +17,12 @@ Command syntax: to list the kwb image file details ./tools/mkimage -n <board specific configuration file> \ - -T kwbimage -a <start address> -e <execution address> \ + -T kwbimage -a <start address> -e <execution address> \ -d <input_raw_binary> <output_kwboot_file> for ex. ./tools/mkimage -n ./board/Marvell/openrd_base/kwbimage.cfg \ - -T kwbimage -a 0x00600000 -e 0x00600000 \ + -T kwbimage -a 0x00600000 -e 0x00600000 \ -d u-boot.bin u-boot.kwb kwimage support available with mkimage utility will generate kirkwood boot diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c index 4a7ce5b..2768c75 100644 --- a/drivers/net/phy/miiphybb.c +++ b/drivers/net/phy/miiphybb.c @@ -119,7 +119,7 @@ struct bb_miiphy_bus bb_miiphy_buses[] = { }; int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / - sizeof(bb_miiphy_buses[0]); + sizeof(bb_miiphy_buses[0]); #endif void bb_miiphy_init(void) @@ -167,7 +167,7 @@ static inline struct bb_miiphy_bus *bb_miiphy_getbus(char *devname) * and write). */ static void miiphy_pre(struct bb_miiphy_bus *bus, char read, - unsigned char addr, unsigned char reg) + unsigned char addr, unsigned char reg) { int j; @@ -247,7 +247,7 @@ static void miiphy_pre(struct bb_miiphy_bus *bus, char read, * 0 on success */ int bb_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) + unsigned char reg, unsigned short *value) { short rdreg; /* register working value */ int v; @@ -328,7 +328,7 @@ int bb_miiphy_read(char *devname, unsigned char addr, * 0 on success */ int bb_miiphy_write (char *devname, unsigned char addr, - unsigned char reg, unsigned short value) + unsigned char reg, unsigned short value) { struct bb_miiphy_bus *bus; int j; /* counter */ diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index df73478..c50758e 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -148,7 +148,7 @@ static int smc911x_init(struct eth_device *dev, bd_t * bd) { struct chip_id *id = dev->priv; - printf(DRIVERNAME ": detected %s controller\n", id->name); + printf(DRIVERNAME ": detected %s controller\n", id->name); smc911x_reset(dev); diff --git a/include/asm-arm/arch-davinci/gpio_defs.h b/include/asm-arm/arch-davinci/gpio_defs.h index ec43969..ff62976 100644 --- a/include/asm-arm/arch-davinci/gpio_defs.h +++ b/include/asm-arm/arch-davinci/gpio_defs.h @@ -50,4 +50,3 @@ struct davinci_gpio_bank { }; #endif - diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 310242e..e2930c1 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -282,7 +282,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -//#define CONFIG_CONS_INDEX 2 #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 2a4cb79..6617941 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -129,4 +129,3 @@ #endif #endif /* __CONFIG_H */ - |