diff options
Diffstat (limited to 'board/amcc/canyonlands')
-rw-r--r-- | board/amcc/canyonlands/Makefile | 55 | ||||
-rw-r--r-- | board/amcc/canyonlands/canyonlands.c | 534 | ||||
-rw-r--r-- | board/amcc/canyonlands/chip_config.c | 89 | ||||
-rw-r--r-- | board/amcc/canyonlands/config.mk | 42 | ||||
-rw-r--r-- | board/amcc/canyonlands/init.S | 141 | ||||
-rw-r--r-- | board/amcc/canyonlands/u-boot-nand.lds | 104 |
6 files changed, 0 insertions, 965 deletions
diff --git a/board/amcc/canyonlands/Makefile b/board/amcc/canyonlands/Makefile deleted file mode 100644 index 4d87ea9..0000000 --- a/board/amcc/canyonlands/Makefile +++ /dev/null @@ -1,55 +0,0 @@ -# -# (C) Copyright 2008 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y := $(BOARD).o -COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o -SOBJS := init.o - -COBJS := $(COBJS-y) -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -all: $(LIB) $(SOBJS) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $^) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c deleted file mode 100644 index 80e2739..0000000 --- a/board/amcc/canyonlands/canyonlands.c +++ /dev/null @@ -1,534 +0,0 @@ -/* - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/ppc440.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <i2c.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/mmu.h> -#include <asm/4xx_pcie.h> -#include <asm/ppc4xx-gpio.h> -#include <asm/errno.h> - -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -DECLARE_GLOBAL_DATA_PTR; - -struct board_bcsr { - u8 board_id; - u8 cpld_rev; - u8 led_user; - u8 board_status; - u8 reset_ctrl; - u8 flash_ctrl; - u8 eth_ctrl; - u8 usb_ctrl; - u8 irq_ctrl; -}; - -#define BOARD_CANYONLANDS_PCIE 1 -#define BOARD_CANYONLANDS_SATA 2 -#define BOARD_GLACIER 3 -#define BOARD_ARCHES 4 - -/* - * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with - * board specific values. - */ -#if defined(CONFIG_ARCHES) -u32 ddr_wrdtr(u32 default_val) { - return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_0_DEG | 0x823); -} -#else -u32 ddr_wrdtr(u32 default_val) { - return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823); -} - -u32 ddr_clktr(u32 default_val) { - return (SDRAM_CLKTR_CLKP_90_DEG_ADV); -} -#endif - -#if defined(CONFIG_ARCHES) -/* - * FPGA read/write helper macros - */ -static inline int board_fpga_read(int offset) -{ - int data; - - data = in_8((void *)(CONFIG_SYS_FPGA_BASE + offset)); - - return data; -} - -static inline void board_fpga_write(int offset, int data) -{ - out_8((void *)(CONFIG_SYS_FPGA_BASE + offset), data); -} - -/* - * CPLD read/write helper macros - */ -static inline int board_cpld_read(int offset) -{ - int data; - - out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset); - data = in_8((void *)(CONFIG_SYS_CPLD_DATA)); - - return data; -} - -static inline void board_cpld_write(int offset, int data) -{ - out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset); - out_8((void *)(CONFIG_SYS_CPLD_DATA), data); -} -#else -static int pvr_460ex(void) -{ - u32 pvr = get_pvr(); - - if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA) || - (pvr == PVR_460EX_RB)) - return 1; - - return 0; -} -#endif /* defined(CONFIG_ARCHES) */ - -int board_early_init_f(void) -{ -#if !defined(CONFIG_ARCHES) - u32 sdr0_cust0; - struct board_bcsr *bcsr_data = - (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; - -#endif - - /* - * Setup the interrupt controller polarities, triggers, etc. - */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(UIC0ER, 0x00000000); /* disable all */ - mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(UIC1ER, 0x00000000); /* disable all */ - mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - mtdcr(UIC2ER, 0x00000000); /* disable all */ - mtdcr(UIC2CR, 0x00000000); /* all non-critical */ - mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - - mtdcr(UIC3SR, 0xffffffff); /* clear all */ - mtdcr(UIC3ER, 0x00000000); /* disable all */ - mtdcr(UIC3CR, 0x00000000); /* all non-critical */ - mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC3SR, 0xffffffff); /* clear all */ - -#if !defined(CONFIG_ARCHES) - /* SDR Setting - enable NDFC */ - mfsdr(SDR0_CUST0, sdr0_cust0); - sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL | - SDR0_CUST0_NDFC_ENABLE | - SDR0_CUST0_NDFC_BW_8_BIT | - SDR0_CUST0_NDFC_ARE_MASK | - SDR0_CUST0_NDFC_BAC_ENCODE(3) | - (0x80000000 >> (28 + CONFIG_SYS_NAND_CS)); - mtsdr(SDR0_CUST0, sdr0_cust0); -#endif - - /* - * Configure PFC (Pin Function Control) registers - * UART0: 4 pins - */ - mtsdr(SDR0_PFC1, 0x00040000); - - /* Enable PCI host functionality in SDR0_PCI0 */ - mtsdr(SDR0_PCI0, 0xe0000000); - -#if !defined(CONFIG_ARCHES) - /* Enable ethernet and take out of reset */ - out_8(&bcsr_data->eth_ctrl, 0) ; - - /* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */ - out_8(&bcsr_data->flash_ctrl, 0) ; - mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */ - - /* Setup PLB4-AHB bridge based on the system address map */ - mtdcr(AHB_TOP, 0x8000004B); - mtdcr(AHB_BOT, 0x8000004B); - -#endif - - return 0; -} - -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) -int usb_board_init(void) -{ - struct board_bcsr *bcsr_data = - (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; - u8 val; - - /* Enable USB host & USB-OTG */ - val = in_8(&bcsr_data->usb_ctrl); - val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST); - out_8(&bcsr_data->usb_ctrl, val); - - /* - * Configure USB-STP pins as alternate and not GPIO - * It seems to be neccessary to configure the STP pins as GPIO - * input at powerup (perhaps while USB reset is asserted). So - * we configure those pins to their "real" function now. - */ - gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - - return 0; -} - -int usb_board_stop(void) -{ - struct board_bcsr *bcsr_data = - (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; - u8 val; - - /* Disable USB host & USB-OTG */ - val = in_8(&bcsr_data->usb_ctrl); - val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST); - out_8(&bcsr_data->usb_ctrl, val); - - /* Reconfigure USB-STP pins as input */ - gpio_config(16, GPIO_IN , GPIO_SEL, GPIO_OUT_0); - gpio_config(19, GPIO_IN , GPIO_SEL, GPIO_OUT_0); - - return 0; -} - -int usb_board_init_fail(void) -{ - return usb_board_stop(); -} -#endif /* CONFIG_USB_OHCI_NEW && CONFIG_SYS_USB_OHCI_BOARD_INIT */ - -#if !defined(CONFIG_ARCHES) -static void canyonlands_sata_init(int board_type) -{ - u32 reg; - - if (board_type == BOARD_CANYONLANDS_SATA) { - /* Put SATA in reset */ - SDR_WRITE(SDR0_SRST1, 0x00020001); - - /* Set the phy for SATA, not PCI-E port 0 */ - reg = SDR_READ(PESDR0_PHY_CTL_RST); - SDR_WRITE(PESDR0_PHY_CTL_RST, (reg & 0xeffffffc) | 0x00000001); - reg = SDR_READ(PESDR0_L0CLK); - SDR_WRITE(PESDR0_L0CLK, (reg & 0xfffffff8) | 0x00000007); - SDR_WRITE(PESDR0_L0CDRCTL, 0x00003111); - SDR_WRITE(PESDR0_L0DRV, 0x00000104); - - /* Bring SATA out of reset */ - SDR_WRITE(SDR0_SRST1, 0x00000000); - } -} -#endif /* !defined(CONFIG_ARCHES) */ - -int get_cpu_num(void) -{ - int cpu = NA_OR_UNKNOWN_CPU; - -#if defined(CONFIG_ARCHES) - int cpu_num; - - cpu_num = board_fpga_read(0x3); - - /* sanity check; assume cpu numbering starts and increments from 0 */ - if ((cpu_num >= 0) && (cpu_num < CONFIG_BD_NUM_CPUS)) - cpu = cpu_num; -#endif - - return cpu; -} - -#if !defined(CONFIG_ARCHES) -int checkboard(void) -{ - struct board_bcsr *bcsr_data = - (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; - char *s = getenv("serial#"); - - if (pvr_460ex()) { - printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board"); - if (in_8(&bcsr_data->board_status) & BCSR_SELECT_PCIE) - gd->board_type = BOARD_CANYONLANDS_PCIE; - else - gd->board_type = BOARD_CANYONLANDS_SATA; - } else { - printf("Board: Glacier - AMCC PPC460GT Evaluation Board"); - gd->board_type = BOARD_GLACIER; - } - - switch (gd->board_type) { - case BOARD_CANYONLANDS_PCIE: - case BOARD_GLACIER: - puts(", 2*PCIe"); - break; - - case BOARD_CANYONLANDS_SATA: - puts(", 1*PCIe/1*SATA"); - break; - } - - printf(", Rev. %X", in_8(&bcsr_data->cpld_rev)); - - if (s != NULL) { - puts(", serial# "); - puts(s); - } - putc('\n'); - - canyonlands_sata_init(gd->board_type); - - return (0); -} - -#else /* defined(CONFIG_ARCHES) */ - -int checkboard(void) -{ - char *s = getenv("serial#"); - - printf("Board: Arches - AMCC DUAL PPC460GT Reference Design\n"); - printf(" Revision %02x.%02x ", - board_fpga_read(0x0), board_fpga_read(0x1)); - - gd->board_type = BOARD_ARCHES; - - /* Only CPU0 has access to CPLD registers */ - if (get_cpu_num() == 0) { - u8 cfg_sw = board_cpld_read(0x1); - printf("(FPGA=%02x, CPLD=%02x)\n", - board_fpga_read(0x2), board_cpld_read(0x0)); - printf(" Configuration Switch %d%d%d%d\n", - ((cfg_sw >> 3) & 0x01), - ((cfg_sw >> 2) & 0x01), - ((cfg_sw >> 1) & 0x01), - ((cfg_sw >> 0) & 0x01)); - } else - printf("(FPGA=%02x, CPLD=xx)\n", board_fpga_read(0x2)); - - - if (s != NULL) - printf(" Serial# %s\n", s); - - return 0; -} -#endif /* !defined(CONFIG_ARCHES) */ - -#if defined(CONFIG_PCI) -int board_pcie_first(void) -{ - /* - * Canyonlands with SATA enabled has only one PCIe slot - * (2nd one). - */ - if (gd->board_type == BOARD_CANYONLANDS_SATA) - return 1; - - return 0; -} -#endif /* CONFIG_PCI */ - -int board_early_init_r (void) -{ - /* - * Canyonlands has 64MBytes of NOR FLASH (Spansion 29GL512), but the - * boot EBC mapping only supports a maximum of 16MBytes - * (4.ff00.0000 - 4.ffff.ffff). - * To solve this problem, the FLASH has to get remapped to another - * EBC address which accepts bigger regions: - * - * 0xfc00.0000 -> 4.cc00.0000 - */ - - /* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtebc(PB3CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); -#else - mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); -#endif - - /* Remove TLB entry of boot EBC mapping */ - remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20); - - /* Add TLB entry for 0xfc00.0000 -> 0x4.cc00.0000 */ - program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE, - TLB_WORD2_I_ENABLE); - - /* - * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address - * 0xfc00.0000 is possible - */ - - /* - * Clear potential errors resulting from auto-calibration. - * If not done, then we could get an interrupt later on when - * exceptions are enabled. - */ - set_mcsr(get_mcsr()); - - return 0; -} - -#if !defined(CONFIG_ARCHES) -int misc_init_r(void) -{ - u32 sdr0_srst1 = 0; - u32 eth_cfg; - u8 val; - - /* - * Set EMAC mode/configuration (GMII, SGMII, RGMII...). - * This is board specific, so let's do it here. - */ - mfsdr(SDR0_ETH_CFG, eth_cfg); - /* disable SGMII mode */ - eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE | - SDR0_ETH_CFG_SGMII1_ENABLE | - SDR0_ETH_CFG_SGMII0_ENABLE); - /* Set the for 2 RGMII mode */ - /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ - eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL; - if (pvr_460ex()) - eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; - else - eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL; - mtsdr(SDR0_ETH_CFG, eth_cfg); - - /* - * The AHB Bridge core is held in reset after power-on or reset - * so enable it now - */ - mfsdr(SDR0_SRST1, sdr0_srst1); - sdr0_srst1 &= ~SDR0_SRST1_AHB; - mtsdr(SDR0_SRST1, sdr0_srst1); - - /* - * RTC/M41T62: - * Disable square wave output: Batterie will be drained - * quickly, when this output is not disabled - */ - val = i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, 0xa); - val &= ~0x40; - i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0xa, val); - - return 0; -} - -#else /* defined(CONFIG_ARCHES) */ - -int misc_init_r(void) -{ - u32 eth_cfg = 0; - u32 eth_pll; - u32 reg; - - /* - * Set EMAC mode/configuration (GMII, SGMII, RGMII...). - * This is board specific, so let's do it here. - */ - - /* enable SGMII mode */ - eth_cfg |= (SDR0_ETH_CFG_SGMII0_ENABLE | - SDR0_ETH_CFG_SGMII1_ENABLE | - SDR0_ETH_CFG_SGMII2_ENABLE); - - /* Set EMAC for MDIO */ - eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0; - - /* bypass the TAHOE0/TAHOE1 cores for U-Boot */ - eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); - - mtsdr(SDR0_ETH_CFG, eth_cfg); - - /* reset all SGMII interfaces */ - mfsdr(SDR0_SRST1, reg); - reg |= (SDR0_SRST1_SGMII0 | SDR0_SRST1_SGMII1 | SDR0_SRST1_SGMII2); - mtsdr(SDR0_SRST1, reg); - mtsdr(SDR0_ETH_STS, 0xFFFFFFFF); - mtsdr(SDR0_SRST1, 0x00000000); - - do { - mfsdr(SDR0_ETH_PLL, eth_pll); - } while (!(eth_pll & SDR0_ETH_PLL_PLLLOCK)); - - return 0; -} -#endif /* !defined(CONFIG_ARCHES) */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -extern void __ft_board_setup(void *blob, bd_t *bd); - -void ft_board_setup(void *blob, bd_t *bd) -{ - __ft_board_setup(blob, bd); - - if (gd->board_type == BOARD_CANYONLANDS_SATA) { - /* - * When SATA is selected we need to disable the first PCIe - * node in the device tree, so that Linux doesn't initialize - * it. - */ - fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status", - "disabled", sizeof("disabled"), 1); - } - - if (gd->board_type == BOARD_CANYONLANDS_PCIE) { - /* - * When PCIe is selected we need to disable the SATA - * node in the device tree, so that Linux doesn't initialize - * it. - */ - fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status", - "disabled", sizeof("disabled"), 1); - } -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/canyonlands/chip_config.c b/board/amcc/canyonlands/chip_config.c deleted file mode 100644 index 5ad78b8..0000000 --- a/board/amcc/canyonlands/chip_config.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * (C) Copyright 2008-2009 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/ppc4xx_config.h> - -struct ppc4xx_config ppc4xx_config_val[] = { - { - "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", - { - 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "800-nor", "NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100", - { - 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "1000-nor", "NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100", - { - 0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "1066-nor", "NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88", - { - 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - } - }, -#if !defined(CONFIG_ARCHES) - { - "600-nand", "NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100", - { - 0x86, 0x80, 0xce, 0x1f, 0x79, 0x90, 0x01, 0xa0, - 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "800-nand", "NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100", - { - 0x86, 0x80, 0xba, 0x14, 0x99, 0x90, 0x01, 0xa0, - 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "1000-nand", "NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100", - { - 0x86, 0x82, 0x96, 0x19, 0xb9, 0x90, 0x01, 0xa0, - 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, - { - "1066-nand", "NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88", - { - 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x90, 0x01, 0xa0, - 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 - } - }, -#endif -}; - -int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk deleted file mode 100644 index abf2a26..0000000 --- a/board/amcc/canyonlands/config.mk +++ /dev/null @@ -1,42 +0,0 @@ -# -# (C) Copyright 2008-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# -# AMCC 460EX/460GT Evaluation Board (Canyonlands) board -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S deleted file mode 100644 index 8b7bfce..0000000 --- a/board/amcc/canyonlands/init.S +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <asm-offsets.h> -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to - * use the speed up boot process. It is patched after relocation to - * enable SA_I - */ -#ifndef CONFIG_NAND_SPL - tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_RWX | SA_G) /* TLB 0 */ -#else - tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 4, AC_RWX | SA_G) - tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG) - tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_RWX | SA_IG) -#endif - - /* - * TLB entries for SDRAM are not needed on this platform. - * They are dynamically generated in the SPD DDR(2) detection - * routine. - */ - -#ifdef CONFIG_SYS_INIT_RAM_DCACHE - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G) -#endif - - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) - - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG) - - /* PCIe UTL register */ - tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_RW | SA_IG) - -#if !defined(CONFIG_ARCHES) - /* TLB-entry for NAND */ - tlbentry(CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 4, AC_RWX | SA_IG) - - /* TLB-entry for CPLD */ - tlbentry(CONFIG_SYS_BCSR_BASE, SZ_1K, CONFIG_SYS_BCSR_BASE, 4, AC_RW | SA_IG) -#else - /* TLB-entry for FPGA */ - tlbentry(CONFIG_SYS_FPGA_BASE, SZ_16M, CONFIG_SYS_FPGA_BASE, 4, AC_RW | SA_IG) -#endif - - /* TLB-entry for OCM */ - tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4, AC_RWX | SA_I) - - /* TLB-entry for Local Configuration registers => peripherals */ - tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_RWX | SA_IG) - - /* AHB: Internal USB Peripherals (USB, SATA) */ - tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_RWX | SA_IG) - -#if defined(CONFIG_RAPIDIO) - /* TLB-entries for RapidIO (SRIO) */ - tlbentry(CONFIG_SYS_SRGPL0_REG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_REG_BAR, - 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_SRGPL0_CFG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_CFG_BAR, - 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_SRGPL0_MNT_BAR, SZ_16M, CONFIG_SYS_SRGPL0_MNT_BAR, - 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_I2ODMA_BASE, SZ_1K, 0x00100000, - 0x4, AC_RW | SA_IG) -#endif - - tlbtab_end - -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) - /* - * For NAND booting the first TLB has to be reconfigured to full size - * and with caching disabled after running from RAM! - */ -#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) -#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1) -#define TLB02 TLB2(AC_RWX | SA_IG) - - .globl reconfig_tlb0 -reconfig_tlb0: - sync - isync - addi r4,r0,0x0000 /* TLB entry #0 */ - lis r5,TLB00@h - ori r5,r5,TLB00@l - tlbwe r5,r4,0x0000 /* Save it out */ - lis r5,TLB01@h - ori r5,r5,TLB01@l - tlbwe r5,r4,0x0001 /* Save it out */ - lis r5,TLB02@h - ori r5,r5,TLB02@l - tlbwe r5,r4,0x0002 /* Save it out */ - sync - isync - blr -#endif diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds deleted file mode 100644 index 534d6dd..0000000 --- a/board/amcc/canyonlands/u-boot-nand.lds +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - board/amcc/canyonlands/init.o (.text*) - - /* Align to next NAND block */ - . = ALIGN(0x20000); - common/env_embedded.o (.ppcenv) - /* Keep some space here for redundant env and potential bad env blocks */ - . = ALIGN(0x80000); - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - KEEP(*(.got)) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - - _end = . ; - PROVIDE (end = .); -} |