diff options
Diffstat (limited to 'board/mpl/pip405')
-rw-r--r-- | board/mpl/pip405/pip405.c | 947 |
1 files changed, 947 insertions, 0 deletions
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c new file mode 100644 index 0000000..87ca6ef --- /dev/null +++ b/board/mpl/pip405/pip405.c @@ -0,0 +1,947 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * TODO: clean-up + */ + +#include <common.h> +#include "pip405.h" +#include <asm/processor.h> +#include <i2c.h> +#include "../common/isa.h" +#include "../common/common_util.h" + +#undef SDRAM_DEBUG + +#define FALSE 0 +#define TRUE 1 + +/* stdlib.h causes some compatibility problems; should fixe these! -- wd */ +#ifndef __ldiv_t_defined +typedef struct { + long int quot; /* Quotient */ + long int rem; /* Remainder */ +} ldiv_t; +extern ldiv_t ldiv (long int __numer, long int __denom); + +# define __ldiv_t_defined 1 +#endif + + +typedef enum { + SDRAM_NO_ERR, + SDRAM_SPD_COMM_ERR, + SDRAM_SPD_CHKSUM_ERR, + SDRAM_UNSUPPORTED_ERR, + SDRAM_UNKNOWN_ERR +} SDRAM_ERR; + +typedef struct { + const unsigned char mode; + const unsigned char row; + const unsigned char col; + const unsigned char bank; +} SDRAM_SETUP; + +static const SDRAM_SETUP sdram_setup_table[] = { + {1, 11, 9, 2}, + {1, 11, 10, 2}, + {2, 12, 9, 4}, + {2, 12, 10, 4}, + {3, 13, 9, 4}, + {3, 13, 10, 4}, + {3, 13, 11, 4}, + {4, 12, 8, 2}, + {4, 12, 8, 4}, + {5, 11, 8, 2}, + {5, 11, 8, 4}, + {6, 13, 8, 2}, + {6, 13, 8, 4}, + {7, 13, 9, 2}, + {7, 13, 10, 2}, + {0, 0, 0, 0} +}; + +static const unsigned char cal_indextable[] = { + 9, 23, 25 +}; + + +/* + * translate ns.ns/10 coding of SPD timing values + * into 10 ps unit values + */ + +unsigned short NS10to10PS (unsigned char spd_byte, unsigned char spd_version) +{ + unsigned short ns, ns10; + + /* isolate upper nibble */ + ns = (spd_byte >> 4) & 0x0F; + /* isolate lower nibble */ + ns10 = (spd_byte & 0x0F); + + return (ns * 100 + ns10 * 10); +} + +/* + * translate ns.ns/4 coding of SPD timing values + * into 10 ps unit values + */ + +unsigned short NS4to10PS (unsigned char spd_byte, unsigned char spd_version) +{ + unsigned short ns, ns4; + + /* isolate upper 6 bits */ + ns = (spd_byte >> 2) & 0x3F; + /* isloate lower 2 bits */ + ns4 = (spd_byte & 0x03); + + return (ns * 100 + ns4 * 25); +} + +/* + * translate ns coding of SPD timing values + * into 10 ps unit values + */ + +unsigned short NSto10PS (unsigned char spd_byte) +{ + return (spd_byte * 100); +} + +void SDRAM_err (const char *s) +{ +#ifndef SDRAM_DEBUG + DECLARE_GLOBAL_DATA_PTR; + + (void) get_clocks (); + gd->baudrate = 9600; + serial_init (); +#endif + serial_puts ("\n"); + serial_puts (s); + serial_puts ("\n enable SDRAM_DEBUG for more info\n"); + for (;;); +} + + +#ifdef SDRAM_DEBUG + +void write_hex (unsigned char i) +{ + char cc; + + cc = i >> 4; + cc &= 0xf; + if (cc > 9) + serial_putc (cc + 55); + else + serial_putc (cc + 48); + cc = i & 0xf; + if (cc > 9) + serial_putc (cc + 55); + else + serial_putc (cc + 48); +} + +void write_4hex (unsigned long val) +{ + write_hex ((unsigned char) (val >> 24)); + write_hex ((unsigned char) (val >> 16)); + write_hex ((unsigned char) (val >> 8)); + write_hex ((unsigned char) val); +} + +#endif + +int board_pre_init (void) +{ + unsigned char dataout[1]; + unsigned char datain[128]; + unsigned long sdram_size; + SDRAM_SETUP *t = (SDRAM_SETUP *) sdram_setup_table; + unsigned long memclk; + unsigned long tmemclk = 0; + unsigned long tmp, bank, baseaddr, bank_size; + unsigned short i; + unsigned char rows, cols, banks, sdram_banks, density; + unsigned char supported_cal, trp_clocks, trcd_clocks, tras_clocks, + trc_clocks, tctp_clocks; + unsigned char cal_index, cal_val, spd_version, spd_chksum; + unsigned char buf[8]; +#ifdef SDRAM_DEBUG + DECLARE_GLOBAL_DATA_PTR; +#endif + + memclk = get_bus_freq (tmemclk); + tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */ + +#ifdef SDRAM_DEBUG + (void) get_clocks (); + gd->baudrate = 9600; + serial_init (); + serial_puts ("\nstart SDRAM Setup\n"); +#endif + + /* Read Serial Presence Detect Information */ + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + dataout[0] = 0; + for (i = 0; i < 128; i++) + datain[i] = 127; + i2c_read(SPD_EEPROM_ADDRESS,0,1,datain,128); +#ifdef SDRAM_DEBUG + serial_puts ("\ni2c_read returns "); + write_hex (i); + serial_puts ("\n"); +#endif + +#ifdef SDRAM_DEBUG + for (i = 0; i < 128; i++) { + write_hex (datain[i]); + serial_puts (" "); + if (((i + 1) % 16) == 0) + serial_puts ("\n"); + } + serial_puts ("\n"); +#endif + spd_chksum = 0; + for (i = 0; i < 63; i++) { + spd_chksum += datain[i]; + } /* endfor */ + if (datain[63] != spd_chksum) { +#ifdef SDRAM_DEBUG + serial_puts ("SPD chksum: 0x"); + write_hex (datain[63]); + serial_puts (" != calc. chksum: 0x"); + write_hex (spd_chksum); + serial_puts ("\n"); +#endif + SDRAM_err ("SPD checksum Error"); + } + /* SPD seems to be ok, use it */ + + /* get SPD version */ + spd_version = datain[62]; + + /* do some sanity checks on the kind of RAM */ + if ((datain[0] < 0x80) || /* less than 128 valid bytes in SPD */ + (datain[2] != 0x04) || /* if not SDRAM */ + (!((datain[6] == 0x40) || (datain[6] == 0x48))) || /* or not (64 Bit or 72 Bit) */ + (datain[7] != 0x00) || (datain[8] != 0x01) || /* or not LVTTL signal levels */ + (datain[126] == 0x66)) /* or a 66Mhz modules */ + SDRAM_err ("unsupported SDRAM"); +#ifdef SDRAM_DEBUG + serial_puts ("SDRAM sanity ok\n"); +#endif + + /* get number of rows/cols/banks out of byte 3+4+5 */ + rows = datain[3]; + cols = datain[4]; + banks = datain[5]; + + /* get number of SDRAM banks out of byte 17 and + supported CAS latencies out of byte 18 */ + sdram_banks = datain[17]; + supported_cal = datain[18] & ~0x81; + + while (t->mode != 0) { + if ((t->row == rows) && (t->col == cols) + && (t->bank == sdram_banks)) + break; + t++; + } /* endwhile */ + +#ifdef SDRAM_DEBUG + serial_puts ("rows: "); + write_hex (rows); + serial_puts (" cols: "); + write_hex (cols); + serial_puts (" banks: "); + write_hex (banks); + serial_puts (" mode: "); + write_hex (t->mode); + serial_puts ("\n"); +#endif + if (t->mode == 0) + SDRAM_err ("unsupported SDRAM"); + /* get tRP, tRCD, tRAS and density from byte 27+29+30+31 */ +#ifdef SDRAM_DEBUG + serial_puts ("tRP: "); + write_hex (datain[27]); + serial_puts ("\ntRCD: "); + write_hex (datain[29]); + serial_puts ("\ntRAS: "); + write_hex (datain[30]); + serial_puts ("\n"); +#endif + + trp_clocks = (NSto10PS (datain[27]) + (tmemclk - 1)) / tmemclk; + trcd_clocks = (NSto10PS (datain[29]) + (tmemclk - 1)) / tmemclk; + tras_clocks = (NSto10PS (datain[30]) + (tmemclk - 1)) / tmemclk; + density = datain[31]; + + /* trc_clocks is sum of trp_clocks + tras_clocks */ + trc_clocks = trp_clocks + tras_clocks; + /* ctp = ((trp + tras) - trp - trcd) => tras - trcd */ + tctp_clocks = + ((NSto10PS (datain[30]) - NSto10PS (datain[29])) + + (tmemclk - 1)) / tmemclk; + +#ifdef SDRAM_DEBUG + serial_puts ("c_RP: "); + write_hex (trp_clocks); + serial_puts ("\nc_RCD: "); + write_hex (trcd_clocks); + serial_puts ("\nc_RAS: "); + write_hex (tras_clocks); + serial_puts ("\nc_RC: (RP+RAS): "); + write_hex (trc_clocks); + serial_puts ("\nc_CTP: ((RP+RAS)-RP-RCD): "); + write_hex (tctp_clocks); + serial_puts ("\nt_CTP: RAS - RCD: "); + write_hex ((unsigned + char) ((NSto10PS (datain[30]) - + NSto10PS (datain[29])) >> 8)); + write_hex ((unsigned char) (NSto10PS (datain[30]) - NSto10PS (datain[29]))); + serial_puts ("\ntmemclk: "); + write_hex ((unsigned char) (tmemclk >> 8)); + write_hex ((unsigned char) (tmemclk)); + serial_puts ("\n"); +#endif + + + cal_val = 255; + for (i = 6, cal_index = 0; (i > 0) && (cal_index < 3); i--) { + /* is this CAS latency supported ? */ + if ((supported_cal >> i) & 0x01) { + buf[0] = datain[cal_indextable[cal_index]]; + if (cal_index < 2) { + if (NS10to10PS (buf[0], spd_version) <= tmemclk) + cal_val = i; + } else { + /* SPD bytes 25+26 have another format */ + if (NS4to10PS (buf[0], spd_version) <= tmemclk) + cal_val = i; + } /* endif */ + cal_index++; + } /* endif */ + } /* endfor */ +#ifdef SDRAM_DEBUG + serial_puts ("CAL: "); + write_hex (cal_val + 1); + serial_puts ("\n"); +#endif + + if (cal_val == 255) + SDRAM_err ("unsupported SDRAM"); + + /* get SDRAM timing register */ + mtdcr (memcfga, mem_sdtr1); + tmp = mfdcr (memcfgd) & ~0x018FC01F; + /* insert CASL value */ +/* tmp |= ((unsigned long)cal_val) << 23; */ + tmp |= ((unsigned long) cal_val) << 23; + /* insert PTA value */ + tmp |= ((unsigned long) (trp_clocks - 1)) << 18; + /* insert CTP value */ +/* tmp |= ((unsigned long)(trc_clocks - trp_clocks - trcd_clocks - 1)) << 16; */ + tmp |= ((unsigned long) (trc_clocks - trp_clocks - trcd_clocks)) << 16; + /* insert LDF (always 01) */ + tmp |= ((unsigned long) 0x01) << 14; + /* insert RFTA value */ + tmp |= ((unsigned long) (trc_clocks - 4)) << 2; + /* insert RCD value */ + tmp |= ((unsigned long) (trcd_clocks - 1)) << 0; + +#ifdef SDRAM_DEBUG + serial_puts ("sdtr: "); + write_4hex (tmp); + serial_puts ("\n"); +#endif + + /* write SDRAM timing register */ + mtdcr (memcfga, mem_sdtr1); + mtdcr (memcfgd, tmp); + baseaddr = CFG_SDRAM_BASE; + bank_size = (((unsigned long) density) << 22) / 2; + /* insert AM value */ + tmp = ((unsigned long) t->mode - 1) << 13; + /* insert SZ value; */ + switch (bank_size) { + case 0x00400000: + tmp |= ((unsigned long) 0x00) << 17; + break; + case 0x00800000: + tmp |= ((unsigned long) 0x01) << 17; + break; + case 0x01000000: + tmp |= ((unsigned long) 0x02) << 17; + break; + case 0x02000000: + tmp |= ((unsigned long) 0x03) << 17; + break; + case 0x04000000: + tmp |= ((unsigned long) 0x04) << 17; + break; + case 0x08000000: + tmp |= ((unsigned long) 0x05) << 17; + break; + case 0x10000000: + tmp |= ((unsigned long) 0x06) << 17; + break; + default: + SDRAM_err ("unsupported SDRAM"); + } /* endswitch */ + /* get SDRAM bank 0 register */ + mtdcr (memcfga, mem_mb0cf); + bank = mfdcr (memcfgd) & ~0xFFCEE001; + bank |= (baseaddr | tmp | 0x01); +#ifdef SDRAM_DEBUG + serial_puts ("bank0: baseaddr: "); + write_4hex (baseaddr); + serial_puts (" banksize: "); + write_4hex (bank_size); + serial_puts (" mb0cf: "); + write_4hex (bank); + serial_puts ("\n"); +#endif + baseaddr += bank_size; + sdram_size += bank_size; + + /* write SDRAM bank 0 register */ + mtdcr (memcfga, mem_mb0cf); + mtdcr (memcfgd, bank); + + /* get SDRAM bank 1 register */ + mtdcr (memcfga, mem_mb1cf); + bank = mfdcr (memcfgd) & ~0xFFCEE001; + sdram_size = 0; + +#ifdef SDRAM_DEBUG + serial_puts ("bank1: baseaddr: "); + write_4hex (baseaddr); + serial_puts (" banksize: "); + write_4hex (bank_size); +#endif + if (banks == 2) { + bank |= (baseaddr | tmp | 0x01); + baseaddr += bank_size; + sdram_size += bank_size; + } /* endif */ +#ifdef SDRAM_DEBUG + serial_puts (" mb1cf: "); + write_4hex (bank); + serial_puts ("\n"); +#endif + /* write SDRAM bank 1 register */ + mtdcr (memcfga, mem_mb1cf); + mtdcr (memcfgd, bank); + + /* get SDRAM bank 2 register */ + mtdcr (memcfga, mem_mb2cf); + bank = mfdcr (memcfgd) & ~0xFFCEE001; + + bank |= (baseaddr | tmp | 0x01); + +#ifdef SDRAM_DEBUG + serial_puts ("bank2: baseaddr: "); + write_4hex (baseaddr); + serial_puts (" banksize: "); + write_4hex (bank_size); + serial_puts (" mb2cf: "); + write_4hex (bank); + serial_puts ("\n"); +#endif + + baseaddr += bank_size; + sdram_size += bank_size; + + /* write SDRAM bank 2 register */ + mtdcr (memcfga, mem_mb2cf); + mtdcr (memcfgd, bank); + + /* get SDRAM bank 3 register */ + mtdcr (memcfga, mem_mb3cf); + bank = mfdcr (memcfgd) & ~0xFFCEE001; + +#ifdef SDRAM_DEBUG + serial_puts ("bank3: baseaddr: "); + write_4hex (baseaddr); + serial_puts (" banksize: "); + write_4hex (bank_size); +#endif + + if (banks == 2) { + bank |= (baseaddr | tmp | 0x01); + baseaddr += bank_size; + sdram_size += bank_size; + } + /* endif */ +#ifdef SDRAM_DEBUG + serial_puts (" mb3cf: "); + write_4hex (bank); + serial_puts ("\n"); +#endif + + /* write SDRAM bank 3 register */ + mtdcr (memcfga, mem_mb3cf); + mtdcr (memcfgd, bank); + + + /* get SDRAM refresh interval register */ + mtdcr (memcfga, mem_rtr); + tmp = mfdcr (memcfgd) & ~0x3FF80000; + + if (tmemclk < NSto10PS (16)) + tmp |= 0x05F00000; + else + tmp |= 0x03F80000; + + /* write SDRAM refresh interval register */ + mtdcr (memcfga, mem_rtr); + mtdcr (memcfgd, tmp); + + /* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */ + mtdcr (memcfga, mem_mcopt1); + tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80E00000; + mtdcr (memcfga, mem_mcopt1); + mtdcr (memcfgd, tmp); + + + + /*-------------------------------------------------------------------------+ + | Interrupt controller setup for the PIP405 board. + | Note: IRQ 0-15 405GP internally generated; active high; level sensitive + | IRQ 16 405GP internally generated; active low; level sensitive + | IRQ 17-24 RESERVED + | IRQ 25 (EXT IRQ 0) SouthBridg; active low; level sensitive + | IRQ 26 (EXT IRQ 1) NMI: active low; level sensitive + | IRQ 27 (EXT IRQ 2) SMI: active Low; level sensitive + | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive + | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive + | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive + | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive + | Note for PIP405 board: + | An interrupt taken for the SouthBridge (IRQ 25) indicates that + | the Interrupt Controller in the South Bridge has caused the + | interrupt. The IC must be read to determine which device + | caused the interrupt. + | + +-------------------------------------------------------------------------*/ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000000); /* set all to be non-critical (for now) */ + mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + + return 0; +} + + +/* ------------------------------------------------------------------------- */ + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + unsigned char s[50]; + unsigned char bc; + int i; + backup_t *b = (backup_t *) s; + + puts ("Board: "); + + i = getenv_r ("serial#", s, 32); + if ((i == 0) || strncmp (s, "PIP405", 6)) { + get_backup_values (b); + if (strncmp (b->signature, "MPL\0", 4) != 0) { + puts ("### No HW ID - assuming PIP405"); + } else { + b->serial_name[6] = 0; + printf ("%s SN: %s", b->serial_name, + &b->serial_name[7]); + } + } else { + s[6] = 0; + printf ("%s SN: %s", s, &s[7]); + } + bc = in8 (CONFIG_PORT_ADDR); + printf (" Boot Config: 0x%x\n", bc); + return (0); +} + + +/* ------------------------------------------------------------------------- */ +/* ------------------------------------------------------------------------- */ +/* + initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of + the necessary info for SDRAM controller configuration +*/ +/* ------------------------------------------------------------------------- */ +/* ------------------------------------------------------------------------- */ +static int test_dram (unsigned long ramsize); + +long int initdram (int board_type) +{ + DECLARE_GLOBAL_DATA_PTR; + + unsigned long bank_reg[4], tmp, bank_size; + int i, ds; + unsigned long TotalSize; + + ds = 0; + /* since the DRAM controller is allready set up, + * calculate the size with the bank registers + */ + mtdcr (memcfga, mem_mb0cf); + bank_reg[0] = mfdcr (memcfgd); + mtdcr (memcfga, mem_mb1cf); + bank_reg[1] = mfdcr (memcfgd); + mtdcr (memcfga, mem_mb2cf); + bank_reg[2] = mfdcr (memcfgd); + mtdcr (memcfga, mem_mb3cf); + bank_reg[3] = mfdcr (memcfgd); + TotalSize = 0; + for (i = 0; i < 4; i++) { + if ((bank_reg[i] & 0x1) == 0x1) { + tmp = (bank_reg[i] >> 17) & 0x7; + bank_size = 4 << tmp; + TotalSize += bank_size; + } else + ds = 1; + } + if (ds == 1) + printf ("single-sided DIMM "); + else + printf ("double-sided DIMM "); + test_dram (TotalSize * 1024 * 1024); + /* bank 2 (SDRAM Clock 2) is not usable if 133MHz SDRAM IF */ + (void) get_clocks(); + if (gd->cpu_clk > 220000000) + TotalSize /= 2; + return (TotalSize * 1024 * 1024); +} + +/* ------------------------------------------------------------------------- */ + + +static int test_dram (unsigned long ramsize) +{ + /* not yet implemented */ + return (1); +} + + +int misc_init_r (void) +{ + return (0); +} + +/*************************************************************************** + * some helping routines + */ + +int overwrite_console (void) +{ + return (in8 (CONFIG_PORT_ADDR) & 0x1); /* return TRUE if console should be overwritten */ +} + + + +extern int isa_init (void); + + +void print_pip405_rev (void) +{ + unsigned char part, vers, cfg; + + part = in8 (PLD_PART_REG); + vers = in8 (PLD_VERS_REG); + cfg = in8 (PLD_BOARD_CFG_REG); + printf ("Rev: PIP405-%d Rev %c PLD%d %d PLD%d %d\n", + 16 - ((cfg >> 4) & 0xf), (cfg & 0xf) + 'A', part & 0xf, + vers & 0xf, (part >> 4) & 0xf, (vers >> 4) & 0xf); +} + +extern void check_env(void); + + +int last_stage_init (void) +{ + print_pip405_rev (); + isa_init (); + show_stdio_dev (); + check_env(); + return 0; +} + +/************************************************************************ +* Print PIP405 Info +************************************************************************/ +void print_pip405_info (void) +{ + unsigned char part, vers, cfg, ledu, sysman, flashcom, can, serpwr, + compwr, nicvga, scsirst; + + part = in8 (PLD_PART_REG); + vers = in8 (PLD_VERS_REG); + cfg = in8 (PLD_BOARD_CFG_REG); + ledu = in8 (PLD_LED_USER_REG); + sysman = in8 (PLD_SYS_MAN_REG); + flashcom = in8 (PLD_FLASH_COM_REG); + can = in8 (PLD_CAN_REG); + serpwr = in8 (PLD_SER_PWR_REG); + compwr = in8 (PLD_COM_PWR_REG); + nicvga = in8 (PLD_NIC_VGA_REG); + scsirst = in8 (PLD_SCSI_RST_REG); + printf ("PLD Part %d version %d\n", + part & 0xf, vers & 0xf); + printf ("PLD Part %d version %d\n", + (part >> 4) & 0xf, (vers >> 4) & 0xf); + printf ("Board Revision %c\n", (cfg & 0xf) + 'A'); + printf ("Population Options %d %d %d %d\n", + (cfg >> 4) & 0x1, (cfg >> 5) & 0x1, + (cfg >> 6) & 0x1, (cfg >> 7) & 0x1); + printf ("User LED0 %s User LED1 %s\n", + ((ledu & 0x1) == 0x1) ? "on" : "off", + ((ledu & 0x2) == 0x2) ? "on" : "off"); + printf ("Additionally Options %d %d\n", + (ledu >> 2) & 0x1, (ledu >> 3) & 0x1); + printf ("User Config Switch %d %d %d %d\n", + (ledu >> 4) & 0x1, (ledu >> 5) & 0x1, + (ledu >> 6) & 0x1, (ledu >> 7) & 0x1); + switch (sysman & 0x3) { + case 0: + printf ("PCI Clocks are running\n"); + break; + case 1: + printf ("PCI Clocks are stopped in POS State\n"); + break; + case 2: + printf ("PCI Clocks are stopped when PCI_STP# is asserted\n"); + break; + case 3: + printf ("PCI Clocks are stopped\n"); + break; + } + switch ((sysman >> 2) & 0x3) { + case 0: + printf ("Main Clocks are running\n"); + break; + case 1: + printf ("Main Clocks are stopped in POS State\n"); + break; + case 2: + case 3: + printf ("PCI Clocks are stopped\n"); + break; + } + printf ("INIT asserts %sINT2# (SMI)\n", + ((sysman & 0x10) == 0x10) ? "" : "not "); + printf ("INIT asserts %sINT1# (NMI)\n", + ((sysman & 0x20) == 0x20) ? "" : "not "); + printf ("INIT occured %d\n", (sysman >> 6) & 0x1); + printf ("SER1 is routed to %s\n", + ((flashcom & 0x1) == 0x1) ? "RS485" : "RS232"); + printf ("COM2 is routed to %s\n", + ((flashcom & 0x2) == 0x2) ? "RS485" : "RS232"); + printf ("RS485 is configured as %s duplex\n", + ((flashcom & 0x4) == 0x4) ? "full" : "half"); + printf ("RS485 is connected to %s\n", + ((flashcom & 0x8) == 0x8) ? "COM1" : "COM2"); + printf ("SER1 uses handshakes %s\n", + ((flashcom & 0x10) == 0x10) ? "DTR/DSR" : "RTS/CTS"); + printf ("Bootflash is %swriteprotected\n", + ((flashcom & 0x20) == 0x20) ? "not " : ""); + printf ("Bootflash VPP is %s\n", + ((flashcom & 0x40) == 0x40) ? "on" : "off"); + printf ("Bootsector is %swriteprotected\n", + ((flashcom & 0x80) == 0x80) ? "not " : ""); + switch ((can) & 0x3) { + case 0: + printf ("CAN Controller is on address 0x1000..0x10FF\n"); + break; + case 1: + printf ("CAN Controller is on address 0x8000..0x80FF\n"); + break; + case 2: + printf ("CAN Controller is on address 0xE000..0xE0FF\n"); + break; + case 3: + printf ("CAN Controller is disabled\n"); + break; + } + switch ((can >> 2) & 0x3) { + case 0: + printf ("CAN Controller Reset is ISA Reset\n"); + break; + case 1: + printf ("CAN Controller Reset is ISA Reset and POS State\n"); + break; + case 2: + case 3: + printf ("CAN Controller is in reset\n"); + break; + } + if (((can >> 4) < 3) || ((can >> 4) == 8) || ((can >> 4) == 13)) + printf ("CAN Interrupt is disabled\n"); + else + printf ("CAN Interrupt is ISA INT%d\n", (can >> 4) & 0xf); + switch (serpwr & 0x3) { + case 0: + printf ("SER0 Drivers are enabled\n"); + break; + case 1: + printf ("SER0 Drivers are disabled in the POS state\n"); + break; + case 2: + case 3: + printf ("SER0 Drivers are disabled\n"); + break; + } + switch ((serpwr >> 2) & 0x3) { + case 0: + printf ("SER1 Drivers are enabled\n"); + break; + case 1: + printf ("SER1 Drivers are disabled in the POS state\n"); + break; + case 2: + case 3: + printf ("SER1 Drivers are disabled\n"); + break; + } + switch (compwr & 0x3) { + case 0: + printf ("COM1 Drivers are enabled\n"); + break; + case 1: + printf ("COM1 Drivers are disabled in the POS state\n"); + break; + case 2: + case 3: + printf ("COM1 Drivers are disabled\n"); + break; + } + switch ((compwr >> 2) & 0x3) { + case 0: + printf ("COM2 Drivers are enabled\n"); + break; + case 1: + printf ("COM2 Drivers are disabled in the POS state\n"); + break; + case 2: + case 3: + printf ("COM2 Drivers are disabled\n"); + break; + } + switch ((nicvga) & 0x3) { + case 0: + printf ("PHY is running\n"); + break; + case 1: + printf ("PHY is in Power save mode in POS state\n"); + break; + case 2: + case 3: + printf ("PHY is in Power save mode\n"); + break; + } + switch ((nicvga >> 2) & 0x3) { + case 0: + printf ("VGA is running\n"); + break; + case 1: + printf ("VGA is in Power save mode in POS state\n"); + break; + case 2: + case 3: + printf ("VGA is in Power save mode\n"); + break; + } + printf ("PHY is %sreseted\n", ((nicvga & 0x10) == 0x10) ? "" : "not "); + printf ("VGA is %sreseted\n", ((nicvga & 0x20) == 0x20) ? "" : "not "); + printf ("Reserved Configuration is %d %d\n", (nicvga >> 6) & 0x1, + (nicvga >> 7) & 0x1); + switch ((scsirst) & 0x3) { + case 0: + printf ("SCSI Controller is running\n"); + break; + case 1: + printf ("SCSI Controller is in Power save mode in POS state\n"); + break; + case 2: + case 3: + printf ("SCSI Controller is in Power save mode\n"); + break; + } + printf ("SCSI termination is %s\n", + ((scsirst & 0x4) == 0x4) ? "disabled" : "enabled"); + printf ("SCSI Controller is %sreseted\n", + ((scsirst & 0x10) == 0x10) ? "" : "not "); + printf ("IDE disks are %sreseted\n", + ((scsirst & 0x20) == 0x20) ? "" : "not "); + printf ("ISA Bus is %sreseted\n", + ((scsirst & 0x40) == 0x40) ? "" : "not "); + printf ("Super IO is %sreseted\n", + ((scsirst & 0x80) == 0x80) ? "" : "not "); +} + +void user_led0 (unsigned char on) +{ + if (on == TRUE) + out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1)); + else + out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe)); +} + +void user_led1 (unsigned char on) +{ + if (on == TRUE) + out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2)); + else + out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd)); +} + +void ide_set_reset (int idereset) +{ + /* if reset = 1 IDE reset will be asserted */ + unsigned char resreg; + + resreg = in8 (PLD_SCSI_RST_REG); + if (idereset == 1) + resreg |= 0x20; + else { + udelay(10000); + resreg &= 0xdf; + } + out8 (PLD_SCSI_RST_REG, resreg); +} + + |