summaryrefslogtreecommitdiffstats
path: root/board/trab
diff options
context:
space:
mode:
Diffstat (limited to 'board/trab')
-rw-r--r--board/trab/flash.c13
-rw-r--r--board/trab/trab.c85
-rw-r--r--board/trab/vfd.c45
3 files changed, 115 insertions, 28 deletions
diff --git a/board/trab/flash.c b/board/trab/flash.c
index a4f164b..d86c4bf 100644
--- a/board/trab/flash.c
+++ b/board/trab/flash.c
@@ -124,11 +124,10 @@ void flash_print_info (flash_info_t * info)
switch (info->flash_id & FLASH_VENDMASK) {
case (FLASH_MAN_AMD & FLASH_VENDMASK):
- printf ("AMD: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
+ printf ("AMD "); break;
+ case (FLASH_MAN_FUJ & FLASH_VENDMASK):
+ printf ("FUJITSU "); break;
+ default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
@@ -477,7 +476,9 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
case AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
-
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 111c861..e3e8553 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -30,6 +30,13 @@
/* ------------------------------------------------------------------------- */
+#ifdef CFG_BRIGHTNESS
+static void spi_init(void);
+static void wait_transmit_done(void);
+static void tsc2000_write(unsigned int page, unsigned int reg,
+ unsigned int data);
+static void tsc2000_set_brightness(void);
+#endif
#ifdef CONFIG_MODEM_SUPPORT
static int key_pressed(void);
extern void disable_putc(void);
@@ -104,6 +111,10 @@ int board_init ()
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x0c000100;
+ /* Make sure both buzzers are turned off */
+ rPDCON |= 0x5400;
+ rPDDAT &= ~0xE0;
+
#ifdef CONFIG_VFD
vfd_init_clocks();
#endif /* CONFIG_VFD */
@@ -164,6 +175,9 @@ int misc_init_r (void)
free (str);
}
+#ifdef CFG_BRIGHTNESS
+ tsc2000_set_brightness();
+#endif
return (0);
}
@@ -288,3 +302,74 @@ static int key_pressed(void)
return (compare_magic(KBD_DATA, CONFIG_MODEM_KEY_MAGIC) == 0);
}
#endif /* CONFIG_MODEM_SUPPORT */
+
+#ifdef CFG_BRIGHTNESS
+
+#define SET_CS_TOUCH (rPDDAT &= 0x5FF)
+#define CLR_CS_TOUCH (rPDDAT |= 0x200)
+
+static void spi_init(void)
+{
+ int i;
+
+ /* Configure I/O ports. */
+ rPDCON = (rPDCON & 0xF3FFFF) | 0x040000;
+ rPGCON = (rPGCON & 0x0F3FFF) | 0x008000;
+ rPGCON = (rPGCON & 0x0CFFFF) | 0x020000;
+ rPGCON = (rPGCON & 0x03FFFF) | 0x080000;
+
+ CLR_CS_TOUCH;
+
+ rSPPRE = 0x1F; /* Baudrate ca. 514kHz */
+ rSPPIN = 0x01; /* SPI-MOSI holds Level after last bit */
+ rSPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */
+
+ /* Dummy byte ensures clock to be low. */
+ for (i = 0; i < 10; i++) {
+ rSPTDAT = 0xFF;
+ }
+}
+
+static void wait_transmit_done(void)
+{
+ while (!(rSPSTA & 0x01)); /* wait until transfer is done */
+}
+
+static void tsc2000_write(unsigned int page, unsigned int reg,
+ unsigned int data)
+{
+ unsigned int command;
+
+ SET_CS_TOUCH;
+ command = 0x0000;
+ command |= (page << 11);
+ command |= (reg << 5);
+
+ rSPTDAT = (command & 0xFF00) >> 8;
+ wait_transmit_done();
+ rSPTDAT = (command & 0x00FF);
+ wait_transmit_done();
+ rSPTDAT = (data & 0xFF00) >> 8;
+ wait_transmit_done();
+ rSPTDAT = (data & 0x00FF);
+ wait_transmit_done();
+
+ CLR_CS_TOUCH;
+}
+
+static void tsc2000_set_brightness(void)
+{
+ uchar tmp[10];
+ int i, br;
+
+ spi_init();
+ tsc2000_write(1, 2, 0x0); /* Power up DAC */
+
+ i = getenv_r("brightness", tmp, sizeof(tmp));
+ br = (i > 0)
+ ? (int) simple_strtoul (tmp, NULL, 10)
+ : CFG_BRIGHTNESS;
+
+ tsc2000_write(0, 0xb, br & 0xff);
+}
+#endif
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index fa1194c..5e601ef 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -55,7 +55,6 @@
#define BLAU 0x0C
#define VIOLETT 0X0D
-ulong vfdbase;
ulong frame_buf_size;
#define frame_buf_offs 4
@@ -86,7 +85,7 @@ void init_grid_ctrl(void)
else
val = ~0;
- for (adr = vfdbase; adr <= (vfdbase+7168); adr += 4) {
+ for (adr = gd->fb_base; adr <= (gd->fb_base+7168); adr += 4) {
(*(volatile ulong*)(adr)) = val;
}
@@ -100,7 +99,7 @@ void init_grid_ctrl(void)
/* wrap arround if offset (see manual S3C2400) */
if (bit>=frame_buf_size*8)
bit = bit - (frame_buf_size * 8);
- adr = vfdbase + (bit/32) * 4 + (3 - (bit%32) / 8);
+ adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8);
bit_nr = bit % 8;
bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
temp=(*(volatile unsigned char*)(adr));
@@ -117,7 +116,7 @@ void init_grid_ctrl(void)
/* wrap arround if offset (see manual S3C2400) */
if (bit>=frame_buf_size*8)
bit = bit-(frame_buf_size*8);
- adr = vfdbase+(bit/32)*4+(3-(bit%32)/8);
+ adr = gd->fb_base+(bit/32)*4+(3-(bit%32)/8);
bit_nr = bit%8;
bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
temp=(*(volatile unsigned char*)(adr));
@@ -138,7 +137,7 @@ void init_grid_ctrl(void)
/* wrap arround if offset (see manual S3C2400) */
if (bit>=frame_buf_size*8)
bit = bit - (frame_buf_size * 8);
- adr = vfdbase + (bit/32) * 4 + (3 - (bit%32) / 8);
+ adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8);
bit_nr = bit % 8;
bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
temp=(*(volatile unsigned char*)(adr));
@@ -154,7 +153,7 @@ void init_grid_ctrl(void)
/* wrap arround if offset (see manual S3C2400) */
if (bit>=frame_buf_size*8)
bit = bit-(frame_buf_size*8);
- adr = vfdbase+(bit/32)*4+(3-(bit%32)/8);
+ adr = gd->fb_base+(bit/32)*4+(3-(bit%32)/8);
bit_nr = bit%8;
bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
temp=(*(volatile unsigned char*)(adr));
@@ -254,7 +253,7 @@ void create_vfd_table(void)
for(color=0;color<2;color++) {
for(display=0;display<4;display++) {
for(entry=0;entry<2;entry++) {
- unsigned long adr = vfdbase;
+ unsigned long adr = gd->fb_base;
unsigned int bit_nr = 0;
if (vfd_table[x][y][color][display][entry]) {
@@ -266,7 +265,7 @@ void create_vfd_table(void)
*/
if (pixel>=frame_buf_size*8)
pixel = pixel-(frame_buf_size*8);
- adr = vfdbase+(pixel/32)*4+(3-(pixel%32)/8);
+ adr = gd->fb_base+(pixel/32)*4+(3-(pixel%32)/8);
bit_nr = pixel%8;
bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
}
@@ -375,7 +374,7 @@ int vfd_init_clocks(void)
rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA;
/* Port-Pins als LCD-Ausgang */
rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8;
-#ifdef WITH_VFRAME
+#ifdef CFG_WITH_VFRAME
/* mit VFRAME zum Messen */
rPDCON = (rPDCON & 0xFFFFFF00)| 0x000000AA;
#endif
@@ -385,10 +384,18 @@ int vfd_init_clocks(void)
rLCDCON4 = 0x00000001;
rLCDCON5 = 0x00000440;
rLCDCON1 = 0x00000B75;
+
+ return 0;
}
/*
* initialize LCD-Controller of the S3C2400 for using VFDs
+ *
+ * VFD detection depends on the board revision:
+ * starting from Rev. 200 a type code can be read from the data pins,
+ * driven by some pull-up resistors; all earlier systems must be
+ * manually configured. The type is set in the "vfd_type" environment
+ * variable.
*/
int drv_vfd_init(void)
{
@@ -406,21 +413,15 @@ int drv_vfd_init(void)
/* try to determine display type from the value
* defined by pull-ups
*/
- rPCUP = (rPCUP | 0x000F); /* activate GPC0...GPC3 pullups */
+ rPCUP = (rPCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */
rPCCON = (rPCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */
+ udelay(10); /* allow signals to settle */
vfd_id = (~rPCDAT) & 0x000F; /* read GPC0...GPC3 port pins */
debug("Detecting Revison of WA4-VFD: ID=0x%X\n", vfd_id);
switch (vfd_id) {
- case 0: /* board revision <= Rev.100 */
-/*-----*/
- gd->vfd_inv_data = 0;
- if (0)
- gd->vfd_type = VFD_TYPE_MN11236;
- else
- gd->vfd_type = VFD_TYPE_T119C;
-/*-----*/
+ case 0: /* board revision < Rev.200 */
if ((tmp = getenv ("vfd_type")) == NULL) {
break;
}
@@ -435,7 +436,7 @@ int drv_vfd_init(void)
gd->vfd_inv_data = 0;
break;
- default: /* default to MN11236, data inverted */
+ default: /* default to MN11236, data inverted */
gd->vfd_type = VFD_TYPE_MN11236;
gd->vfd_inv_data = 1;
setenv ("vfd_type", "MN11236");
@@ -446,7 +447,7 @@ int drv_vfd_init(void)
"unknown",
gd->vfd_inv_data ? ", inverted data" : "");
- vfdbase = gd->fb_base;
+ gd->fb_base = gd->fb_base;
create_vfd_table();
init_grid_ctrl();
@@ -463,9 +464,9 @@ int drv_vfd_init(void)
* see manual S3C2400
*/
/* frame buffer startadr */
- rLCDSADDR1 = vfdbase >> 1;
+ rLCDSADDR1 = gd->fb_base >> 1;
/* frame buffer endadr */
- rLCDSADDR2 = (vfdbase + frame_buf_size) >> 1;
+ rLCDSADDR2 = (gd->fb_base + frame_buf_size) >> 1;
rLCDSADDR3 = ((256/4));
debug ("LCDSADDR1: %lX\n", rLCDSADDR1);
generated by cgit v1.1 at 2024-12-25 06:41:12 +0000