summaryrefslogtreecommitdiffstats
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/a3000/a3000.c1
-rw-r--r--board/amirix/ap1000/ap1000.c1
-rw-r--r--board/ap325rxa/u-boot.lds1
-rw-r--r--board/mucmc52/mucmc52.c68
-rw-r--r--board/purple/purple.c1
-rw-r--r--board/samsung/smdk6400/lowlevel_init.S32
-rw-r--r--board/sh7785lcr/config.mk1
-rw-r--r--board/sh7785lcr/lowlevel_init.S1
-rw-r--r--board/sh7785lcr/rtl8169.h1
-rw-r--r--board/sh7785lcr/rtl8169_mac.c1
-rw-r--r--board/sh7785lcr/selfcheck.c1
-rw-r--r--board/sh7785lcr/u-boot.lds1
-rw-r--r--board/sl8245/sl8245.c1
-rw-r--r--board/stxssa/stxssa.c1
14 files changed, 50 insertions, 62 deletions
diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c
index 040ba89..1ba21ed 100644
--- a/board/a3000/a3000.c
+++ b/board/a3000/a3000.c
@@ -115,4 +115,3 @@ int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
-
diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c
index 8f30ed9..e9f80ff 100644
--- a/board/amirix/ap1000/ap1000.c
+++ b/board/amirix/ap1000/ap1000.c
@@ -703,4 +703,3 @@ int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
-
diff --git a/board/ap325rxa/u-boot.lds b/board/ap325rxa/u-boot.lds
index 015f58b..e9f8dc0 100644
--- a/board/ap325rxa/u-boot.lds
+++ b/board/ap325rxa/u-boot.lds
@@ -103,4 +103,3 @@ SECTIONS
PROVIDE (_end = .);
}
-
diff --git a/board/mucmc52/mucmc52.c b/board/mucmc52/mucmc52.c
index ae3ca24..74417c4 100644
--- a/board/mucmc52/mucmc52.c
+++ b/board/mucmc52/mucmc52.c
@@ -192,22 +192,22 @@ phys_size_t initdram (int board_type)
#endif /* CFG_RAMBOOT */
/*
- * On MPC5200B we need to set the special configuration delay in the
- * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
- * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
- *
- * "The SDelay should be written to a value of 0x00000004. It is
- * required to account for changes caused by normal wafer processing
- * parameters."
- */
- svr = get_svr();
- pvr = get_pvr();
- if ((SVR_MJREV(svr) >= 2) &&
- (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_SDELAY, 0x04);
- __asm__ volatile ("sync");
- }
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+ * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+ *
+ * "The SDelay should be written to a value of 0x00000004. It is
+ * required to account for changes caused by normal wafer processing
+ * parameters."
+ */
+ svr = get_svr();
+ pvr = get_pvr();
+ if ((SVR_MJREV(svr) >= 2) &&
+ (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+ out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_SDELAY, 0x04);
+ __asm__ volatile ("sync");
+ }
return dramsize + dramsize2;
}
@@ -339,14 +339,14 @@ int misc_init_r (void)
free (str);
#endif /* CONFIG_PREBOOT */
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), ' ');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), ' ');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), ' ');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), ' ');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), ' ');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), ' ');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), ' ');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), ' ');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), ' ');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), ' ');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), ' ');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), ' ');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), ' ');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), ' ');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), ' ');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), ' ');
return 0;
}
@@ -365,16 +365,16 @@ int board_early_init_r (void)
int last_stage_init (void)
{
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), 'M');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), 'U');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), 'C');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), '.');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), 'M');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), 'C');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), '5');
- out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), '2');
-
- return 0;
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), 'M');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), 'U');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), 'C');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), '.');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), 'M');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), 'C');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), '5');
+ out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), '2');
+
+ return 0;
}
#if defined(CONFIG_HW_WATCHDOG)
diff --git a/board/purple/purple.c b/board/purple/purple.c
index c129d7a..900e66f 100644
--- a/board/purple/purple.c
+++ b/board/purple/purple.c
@@ -282,4 +282,3 @@ int board_eth_init(bd_t *bis)
return plb2800_eth_initialize(bis);
}
#endif
-
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
index 034c810..e0119a7 100644
--- a/board/samsung/smdk6400/lowlevel_init.S
+++ b/board/samsung/smdk6400/lowlevel_init.S
@@ -2,7 +2,7 @@
* Memory Setup stuff - taken from blob memsetup.S
*
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
*
* Modified for the Samsung SMDK2410 by
* (C) Copyright 2002
@@ -73,8 +73,8 @@ lowlevel_init:
ldr r1, [r0]
str r1, [r0]
- ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000
- ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000
+ ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000
+ ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000
/* Disable all interrupts (VIC0 and VIC1) */
mvn r3, #0x0
@@ -107,11 +107,11 @@ lowlevel_init:
bl mem_ctrl_asm_init
/* Wakeup support. Don't know if it's going to be used, untested. */
- ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
- ldr r1, [r0]
- bic r1, r1, #0xfffffff7
- cmp r1, #0x8
- beq wakeup_reset
+ ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
+ ldr r1, [r0]
+ bic r1, r1, #0xfffffff7
+ cmp r1, #0x8
+ beq wakeup_reset
1:
mov lr, r12
@@ -124,10 +124,10 @@ wakeup_reset:
ldr r1, [r0]
str r1, [r0]
- /* LED test */
- ldr r0, =ELFIN_GPIO_BASE
- ldr r1, =0x3000
- str r1, [r0, #GPNDAT_OFFSET]
+ /* LED test */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x3000
+ str r1, [r0, #GPNDAT_OFFSET]
/* Load return address and jump to kernel */
ldr r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
@@ -201,7 +201,7 @@ wait_for_async:
str r1, [r0, #MPLL_LOCK_OFFSET]
/* Set Clock Divider */
- ldr r1, [r0, #CLK_DIV0_OFFSET]
+ ldr r1, [r0, #CLK_DIV0_OFFSET]
bic r1, r1, #0x30000
bic r1, r1, #0xff00
bic r1, r1, #0xff
@@ -252,7 +252,7 @@ uart_asm_init:
/* set GPIO to enable UART */
ldr r0, =ELFIN_GPIO_BASE
ldr r1, =0x220022
- str r1, [r0, #GPACON_OFFSET]
+ str r1, [r0, #GPACON_OFFSET]
mov pc, lr
#endif
@@ -265,11 +265,11 @@ nand_asm_init:
ldr r1, [r0, #NFCONF_OFFSET]
orr r1, r1, #0x70
orr r1, r1, #0x7700
- str r1, [r0, #NFCONF_OFFSET]
+ str r1, [r0, #NFCONF_OFFSET]
ldr r1, [r0, #NFCONT_OFFSET]
orr r1, r1, #0x07
- str r1, [r0, #NFCONT_OFFSET]
+ str r1, [r0, #NFCONT_OFFSET]
mov pc, lr
#endif
diff --git a/board/sh7785lcr/config.mk b/board/sh7785lcr/config.mk
index 93761ee..20807df 100644
--- a/board/sh7785lcr/config.mk
+++ b/board/sh7785lcr/config.mk
@@ -23,4 +23,3 @@
# NOTE: Must match value used in u-boot.lds (in this directory).
#
TEXT_BASE = 0x0ff80000
-
diff --git a/board/sh7785lcr/lowlevel_init.S b/board/sh7785lcr/lowlevel_init.S
index 8126296..50e1789 100644
--- a/board/sh7785lcr/lowlevel_init.S
+++ b/board/sh7785lcr/lowlevel_init.S
@@ -315,4 +315,3 @@ CS_I2C_WCR_D: .long 0x00000003
CCR_A: .long 0xff00001c
CCR_D: .long 0x0000090b
-
diff --git a/board/sh7785lcr/rtl8169.h b/board/sh7785lcr/rtl8169.h
index d1c0d64..ca9c0bd 100644
--- a/board/sh7785lcr/rtl8169.h
+++ b/board/sh7785lcr/rtl8169.h
@@ -55,4 +55,3 @@ const unsigned short EEPROM_W_Data_8169_B[] = {
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000
};
-
diff --git a/board/sh7785lcr/rtl8169_mac.c b/board/sh7785lcr/rtl8169_mac.c
index 2bc873b..bf0ba14 100644
--- a/board/sh7785lcr/rtl8169_mac.c
+++ b/board/sh7785lcr/rtl8169_mac.c
@@ -346,4 +346,3 @@ U_BOOT_CMD(
"\n"
" - print MAC address for RTL8110\n"
);
-
diff --git a/board/sh7785lcr/selfcheck.c b/board/sh7785lcr/selfcheck.c
index 9c228e5..d924595 100644
--- a/board/sh7785lcr/selfcheck.c
+++ b/board/sh7785lcr/selfcheck.c
@@ -170,4 +170,3 @@ U_BOOT_CMD(
"hwtest sata - check SiI3512 ID\n"
"hwtest pci - output PCI slot device ID\n"
);
-
diff --git a/board/sh7785lcr/u-boot.lds b/board/sh7785lcr/u-boot.lds
index 8dcc6c7..231769f 100644
--- a/board/sh7785lcr/u-boot.lds
+++ b/board/sh7785lcr/u-boot.lds
@@ -94,4 +94,3 @@ SECTIONS
PROVIDE (_end = .);
}
-
diff --git a/board/sl8245/sl8245.c b/board/sl8245/sl8245.c
index e66272e..25adc28 100644
--- a/board/sl8245/sl8245.c
+++ b/board/sl8245/sl8245.c
@@ -77,4 +77,3 @@ int board_eth_init(bd_t *bis)
#endif
return rc;
}
-
diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c
index 71e9b08..4d4dc06 100644
--- a/board/stxssa/stxssa.c
+++ b/board/stxssa/stxssa.c
@@ -407,4 +407,3 @@ int board_eth_init(bd_t *bis)
cpu_eth_init(bis); /* Initialize TSECs first */
return pci_eth_init(bis);
}
-
generated by cgit v1.1 at 2024-11-06 04:58:57 +0000