diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.IPHASE4539 | 2 | ||||
| -rw-r--r-- | doc/README.PIP405 | 16 | ||||
| -rw-r--r-- | doc/README.POST | 4 | ||||
| -rw-r--r-- | doc/README.RPXlite | 2 | ||||
| -rw-r--r-- | doc/README.TQM8260 | 8 | ||||
| -rw-r--r-- | doc/README.alaska8220 | 38 | ||||
| -rw-r--r-- | doc/README.bedbug | 16 | ||||
| -rw-r--r-- | doc/README.mpc5xx | 8 | ||||
| -rw-r--r-- | doc/README.mpc85xxads | 4 |
9 files changed, 49 insertions, 49 deletions
diff --git a/doc/README.IPHASE4539 b/doc/README.IPHASE4539 index b804e06..c5146d9 100644 --- a/doc/README.IPHASE4539 +++ b/doc/README.IPHASE4539 @@ -333,7 +333,7 @@ Linux: $ make oldconfig $ make dep $ make uImage - $ cp -p arch/ppc/mbxboot/uImage /tftpboot + $ cp -p arch/powerpc/mbxboot/uImage /tftpboot Load uImage via tftp and boot it. diff --git a/doc/README.PIP405 b/doc/README.PIP405 index e8a6541..012db1c 100644 --- a/doc/README.PIP405 +++ b/doc/README.PIP405 @@ -17,11 +17,11 @@ Changed files: added console settings from environment - common/devices.c added ISA keyboard init - common/main.c corrected the read of bootdelay -- arch/ppc/cpu/ppc4xx/405gp_pci.c excluded file from PIP405 -- arch/ppc/cpu/ppc4xx/i2c.c added 16bit read write I2C support +- arch/powerpc/cpu/ppc4xx/405gp_pci.c excluded file from PIP405 +- arch/powerpc/cpu/ppc4xx/i2c.c added 16bit read write I2C support added page write -- arch/ppc/cpu/ppc4xx/speed.c added get_PCI_freq -- arch/ppc/cpu/ppc4xx/start.S added CONFIG_IDENT_STRING +- arch/powerpc/cpu/ppc4xx/speed.c added get_PCI_freq +- arch/powerpc/cpu/ppc4xx/start.S added CONFIG_IDENT_STRING - disk/Makefile added part_iso for CD support - disk/part.c changed to work with block device description added ISO CD support @@ -275,7 +275,7 @@ Added the config variable CONFIG_IDENT_STRING which will be added to the "U_BOOT_VERSION __TIME__ DATE___ " String, to allows to identify intermidiate and custom versions. Changed files: -- arch/ppc/cpu/ppc4xx/start.s +- arch/powerpc/cpu/ppc4xx/start.s Firmware Image: --------------- @@ -288,11 +288,11 @@ Changed files: Correct PCI Frequency for PPC405: --------------------------------- -Added function (in arch/ppc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU. +Added function (in arch/powerpc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU. The PCI Frequency will now be set correct in the board description in common/board.c. (was set to the busfreq before). Changed files: -- arch/ppc/cpu/ppc4xx/speed.c +- arch/powerpc/cpu/ppc4xx/speed.c - common/board.c I2C Stuff: @@ -301,7 +301,7 @@ Added defined(CONFIG_PIP405) at several points in common/cmd_i2c.c. Added 16bit read/write support for I2C (PPC405), and page write to I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE. Changed files: -- arch/ppc/cpu/ppc4xx/i2c.c +- arch/powerpc/cpu/ppc4xx/i2c.c - common/cmd_i2c.c Environment / Console: diff --git a/doc/README.POST b/doc/README.POST index 0d5e20e..eeb218d 100644 --- a/doc/README.POST +++ b/doc/README.POST @@ -713,7 +713,7 @@ use external loopback for testing. That will need appropriate reconfiguration of the physical interface chip. The test routines for the SCC ethernet tests will be located in -arch/ppc/cpu/mpc8xx/scc.c. +arch/powerpc/cpu/mpc8xx/scc.c. 2.2.3.2. UART tests (SMC/SCC) @@ -725,7 +725,7 @@ will be transmitted. These tests may be enhanced to make to perform test will be executed manually. The test routine for the SMC/SCC UART tests will be located in -arch/ppc/cpu/mpc8xx/serial.c. +arch/powerpc/cpu/mpc8xx/serial.c. 2.2.3.3. USB test diff --git a/doc/README.RPXlite b/doc/README.RPXlite index 0aa4d11..3ca6711 100644 --- a/doc/README.RPXlite +++ b/doc/README.RPXlite @@ -116,7 +116,7 @@ board/RPXLITE/RPXLITE.c /* DRAM-related routines */ board/RPXLITE/flash.c /* flash-related routines */ board/RPXLITE/config.mk /* set text base address */ - arch/ppc/cpu/mpc8xx/serial.c /* board specific register setting */ + arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */ include/config_RPXLITE.h /* board specific registers */ See 'reg_config.txt' for register values in detail. diff --git a/doc/README.TQM8260 b/doc/README.TQM8260 index e64e64a..93b5506 100644 --- a/doc/README.TQM8260 +++ b/doc/README.TQM8260 @@ -14,10 +14,10 @@ The following common files have been modified by this project: MAKEALL - TQM8260 entry added Makefile - TQM8260_config entry added -arch/ppc/cpu/mpc8260/Makefile - soft_i2c.o module added -arch/ppc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious +arch/powerpc/cpu/mpc8260/Makefile - soft_i2c.o module added +arch/powerpc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious bug fixed (fcr -> scr) -arch/ppc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added +arch/powerpc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added include/flash.h - added definitions for the AM29LV640D Flash chip @@ -33,7 +33,7 @@ board/tqm8260/config.mk - config file board/tqm8260/flash.c - flash driver (for AM29LV640D) board/tqm8260/ppcboot.lds - linker script board/tqm8260/tqm8260.c - ioport and memory initialization -arch/ppc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver +arch/powerpc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver include/config_TQM8260.h - main configuration file diff --git a/doc/README.alaska8220 b/doc/README.alaska8220 index 9249cfb..3345073 100644 --- a/doc/README.alaska8220 +++ b/doc/README.alaska8220 @@ -22,7 +22,7 @@ Changed files: - include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk, vco_clk, pev_clk, flb_clk, and bExtUart -- arch/ppc/lib/board.c added CONFIG_MPC8220 support +- arch/powerpc/lib/board.c added CONFIG_MPC8220 support - net/eth.c added FEC support for MPC8220 @@ -37,24 +37,24 @@ Added files: - board/alaska/config.mk config make - board/alaska/u-boot.lds Linker description -- arch/ppc/cpu/mpc8220/dma.h multi-channel dma header file -- arch/ppc/cpu/mpc8220/dramSetup.h dram setup header file -- arch/ppc/cpu/mpc8220/fec.h MPC8220 FEC header file -- arch/ppc/cpu/mpc8220/cpu.c cpu specific code -- arch/ppc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup -- arch/ppc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup -- arch/ppc/cpu/mpc8220/fec.c MPC8220 FEC driver -- arch/ppc/cpu/mpc8220/i2c.c MPC8220 I2C driver -- arch/ppc/cpu/mpc8220/interrupts.c interrupt support (not enable) -- arch/ppc/cpu/mpc8220/loadtask.c load dma -- arch/ppc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock -- arch/ppc/cpu/mpc8220/traps.c exception -- arch/ppc/cpu/mpc8220/uart.c MPC8220 UART driver -- arch/ppc/cpu/mpc8220/Makefile Makefile -- arch/ppc/cpu/mpc8220/config.mk config make -- arch/ppc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program -- arch/ppc/cpu/mpc8220/io.S io functions -- arch/ppc/cpu/mpc8220/start.S start up +- arch/powerpc/cpu/mpc8220/dma.h multi-channel dma header file +- arch/powerpc/cpu/mpc8220/dramSetup.h dram setup header file +- arch/powerpc/cpu/mpc8220/fec.h MPC8220 FEC header file +- arch/powerpc/cpu/mpc8220/cpu.c cpu specific code +- arch/powerpc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup +- arch/powerpc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup +- arch/powerpc/cpu/mpc8220/fec.c MPC8220 FEC driver +- arch/powerpc/cpu/mpc8220/i2c.c MPC8220 I2C driver +- arch/powerpc/cpu/mpc8220/interrupts.c interrupt support (not enable) +- arch/powerpc/cpu/mpc8220/loadtask.c load dma +- arch/powerpc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock +- arch/powerpc/cpu/mpc8220/traps.c exception +- arch/powerpc/cpu/mpc8220/uart.c MPC8220 UART driver +- arch/powerpc/cpu/mpc8220/Makefile Makefile +- arch/powerpc/cpu/mpc8220/config.mk config make +- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program +- arch/powerpc/cpu/mpc8220/io.S io functions +- arch/powerpc/cpu/mpc8220/start.S start up - include/mpc8220.h diff --git a/doc/README.bedbug b/doc/README.bedbug index 4c1e6c4..35e9d27 100644 --- a/doc/README.bedbug +++ b/doc/README.bedbug @@ -18,15 +18,15 @@ can be easily implemented. ./common/board.c Added call to initialize debugger on startup. -./arch/ppc/cpu/ppc4xx/Makefile +./arch/powerpc/cpu/ppc4xx/Makefile Added bedbug_405.c to the Makefile. -./arch/ppc/cpu/ppc4xx/start.S +./arch/powerpc/cpu/ppc4xx/start.S Added code to handle the debug exception (0x2000) on the 405. Also added code to handle critical exceptions since the debug is treated as critical on the 405. -./arch/ppc/cpu/ppc4xx/traps.c +./arch/powerpc/cpu/ppc4xx/traps.c Added more detailed output for the program exception to tell if it is an illegal instruction, privileged instruction or a trap. Also added debug trap handler. @@ -51,7 +51,7 @@ can be easily implemented. hardware breakpoints and stepping through code. These routines are common to all PowerPC processors. -./arch/ppc/cpu/ppc4xx/bedbug_405.c +./arch/powerpc/cpu/ppc4xx/bedbug_405.c AMCC PPC405 specific debugger routines. @@ -63,16 +63,16 @@ Changes: common/cmd_bedbug.c Added call to initialize 860 debugger. - arch/ppc/cpu/mpc8xx/Makefile + arch/powerpc/cpu/mpc8xx/Makefile Added new file "bedbug_860.c" to the makefile - arch/ppc/cpu/mpc8xx/start.S + arch/powerpc/cpu/mpc8xx/start.S Added handler for InstructionBreakpoint (0xfd00) - arch/ppc/cpu/mpc8xx/traps.c + arch/powerpc/cpu/mpc8xx/traps.c Added new routine DebugException() New Files: - arch/ppc/cpu/mpc8xx/bedbug_860.c + arch/powerpc/cpu/mpc8xx/bedbug_860.c CPU-specific routines for 860 debug registers. diff --git a/doc/README.mpc5xx b/doc/README.mpc5xx index 26fb0c2..df51b5c 100644 --- a/doc/README.mpc5xx +++ b/doc/README.mpc5xx @@ -25,7 +25,7 @@ Added or Changed Files: u-boot-0.2.0/common/cmd_boot.c u-boot-0.2.0/common/cmd_reginfo.c u-boot-0.2.0/common/environment.c -u-boot-0.2.0/arch/ppc/cpu/mpc5xx/* +u-boot-0.2.0/arch/powerpc/cpu/mpc5xx/* u-boot-0.2.0/include/cmd_reginfo.h u-boot-0.2.0/include/common.h u-boot-0.2.0/include/ppc_asm.tmpl @@ -34,9 +34,9 @@ u-boot-0.2.0/include/mpc5xx.h u-boot-0.2.0/include/status_led.h u-boot-0.2.0/include/asm-ppc/u-boot.h u-boot-0.2.0/include/asm-ppc/5xx_immap.h -u-boot-0.2.0/arch/ppc/lib/board.c -u-boot-0.2.0/arch/ppc/lib/cache.c -u-boot-0.2.0/arch/ppc/lib/time.c +u-boot-0.2.0/arch/powerpc/lib/board.c +u-boot-0.2.0/arch/powerpc/lib/cache.c +u-boot-0.2.0/arch/powerpc/lib/time.c u-boot-0.2.0/Makefile u-boot-0.2.0/CREDITS u-boot-0.2.0/doc/README.mpc5xx diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads index ae8202b..046f981 100644 --- a/doc/README.mpc85xxads +++ b/doc/README.mpc85xxads @@ -124,8 +124,8 @@ Updated 13-July-2004 Jon Loeliger kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two default configuration files as your starting points to configure the kernel: - arch/ppc/configs/mpc8540_ads_defconfig - arch/ppc/configs/mpc8560_ads_defconfig + arch/powerpc/configs/mpc8540_ads_defconfig + arch/powerpc/configs/mpc8560_ads_defconfig 3. DEFINITIONS AND COMPILATION |