diff options
Diffstat (limited to 'include/usbdevice.h')
| -rw-r--r-- | include/usbdevice.h | 666 |
1 files changed, 666 insertions, 0 deletions
diff --git a/include/usbdevice.h b/include/usbdevice.h new file mode 100644 index 0000000..206dbbc --- /dev/null +++ b/include/usbdevice.h @@ -0,0 +1,666 @@ +/* + * (C) Copyright 2003 + * Gerry Hamel, geh@ti.com, Texas Instruments + * + * Based on linux/drivers/usbd/usbd.h + * + * Copyright (c) 2000, 2001, 2002 Lineo + * Copyright (c) 2001 Hewlett Packard + * + * By: + * Stuart Lynne <sl@lineo.com>, + * Tom Rushworth <tbr@lineo.com>, + * Bruce Balden <balden@lineo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __USBDCORE_H__ +#define __USBDCORE_H__ + +#include <common.h> +#include "usbdescriptors.h" + + +#define MAX_URBS_QUEUED 5 + + +#if 1 +#define usberr(fmt,args...) serial_printf("ERROR: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args) +#else +#define usberr(fmt,args...) do{}while(0) +#endif + +#if 0 +#define usbdbg(fmt,args...) serial_printf("debug: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args) +#else +#define usbdbg(fmt,args...) do{}while(0) +#endif + +#if 0 +#define usbinfo(fmt,args...) serial_printf("info: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args) +#else +#define usbinfo(fmt,args...) do{}while(0) +#endif + +#ifndef le16_to_cpu +#define le16_to_cpu(x) (x) +#endif + +#ifndef inb +#define inb(p) (*(volatile u8*)(p)) +#endif + +#ifndef outb +#define outb(val,p) (*(volatile u8*)(p) = (val)) +#endif + +#ifndef inw +#define inw(p) (*(volatile u16*)(p)) +#endif + +#ifndef outw +#define outw(val,p) (*(volatile u16*)(p) = (val)) +#endif + +#ifndef inl +#define inl(p) (*(volatile u32*)(p)) +#endif + +#ifndef outl +#define outl(val,p) (*(volatile u32*)(p) = (val)) +#endif + +#ifndef insw +#define insw(p,to,len) mmio_insw(p,to,len) +#endif + +#ifndef outsw +#define outsw(p,from,len) mmio_outsw(p,from,len) +#endif + +#ifndef insb +#define insb(p,to,len) mmio_insb(p,to,len) +#endif + +#ifndef mmio_insw +#define mmio_insw(r,b,l) ({ int __i ; \ + u16 *__b2; \ + __b2 = (u16 *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = inw(r); \ + }; \ + }) +#endif + +#ifndef mmio_outsw +#define mmio_outsw(r,b,l) ({ int __i; \ + u16 *__b2; \ + __b2 = (u16 *) b; \ + for (__i = 0; __i < l; __i++) { \ + outw( *(__b2 + __i), r); \ + } \ + }) +#endif + +#ifndef mmio_insb +#define mmio_insb(r,b,l) ({ int __i ; \ + u8 *__b2; \ + __b2 = (u8 *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = inb(r); \ + }; \ + }) +#endif + +/* + * Structure member address manipulation macros. + * These are used by client code (code using the urb_link routines), since + * the urb_link structure is embedded in the client data structures. + * + * Note: a macro offsetof equivalent to member_offset is defined in stddef.h + * but this is kept here for the sake of portability. + * + * p2surround returns a pointer to the surrounding structure given + * type of the surrounding structure, the name memb of the structure + * member pointed at by ptr. For example, if you have: + * + * struct foo { + * int x; + * float y; + * char z; + * } thingy; + * + * char *cp = &thingy.z; + * + * then + * + * &thingy == p2surround(struct foo, z, cp) + * + * Clear? + */ +#define _cv_(ptr) ((char*)(void*)(ptr)) +#define member_offset(type,memb) (_cv_(&(((type*)0)->memb))-(char*)0) +#define p2surround(type,memb,ptr) ((type*)(void*)(_cv_(ptr)-member_offset(type,memb))) + +struct urb; + +struct usb_endpoint_instance; +struct usb_interface_instance; +struct usb_configuration_instance; +struct usb_device_instance; +struct usb_bus_instance; + +/* + * Device and/or Interface Class codes + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_DATA 10 +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +/* + * USB types + */ +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients + */ +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 + +/* + * USB directions + */ +#define USB_DIR_OUT 0 +#define USB_DIR_IN 0x80 + +/* + * Descriptor types + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 + +#define USB_DT_HID (USB_TYPE_CLASS | 0x01) +#define USB_DT_REPORT (USB_TYPE_CLASS | 0x02) +#define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) +#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) + +/* + * Descriptor sizes per descriptor type + */ +#define USB_DT_DEVICE_SIZE 18 +#define USB_DT_CONFIG_SIZE 9 +#define USB_DT_INTERFACE_SIZE 9 +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ +#define USB_DT_HUB_NONVAR_SIZE 7 +#define USB_DT_HID_SIZE 9 + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 + +/* + * USB Packet IDs (PIDs) + */ +#define USB_PID_UNDEF_0 0xf0 +#define USB_PID_OUT 0xe1 +#define USB_PID_ACK 0xd2 +#define USB_PID_DATA0 0xc3 +#define USB_PID_PING 0xb4 /* USB 2.0 */ +#define USB_PID_SOF 0xa5 +#define USB_PID_NYET 0x96 /* USB 2.0 */ +#define USB_PID_DATA2 0x87 /* USB 2.0 */ +#define USB_PID_SPLIT 0x78 /* USB 2.0 */ +#define USB_PID_IN 0x69 +#define USB_PID_NAK 0x5a +#define USB_PID_DATA1 0x4b +#define USB_PID_PREAMBLE 0x3c /* Token mode */ +#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ +#define USB_PID_SETUP 0x2d +#define USB_PID_STALL 0x1e +#define USB_PID_MDATA 0x0f /* USB 2.0 */ + +/* + * Standard requests + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C + +#define USBD_DEVICE_REQUESTS(x) (((unsigned int)x <= USB_REQ_SYNCH_FRAME) ? usbd_device_requests[x] : "UNKNOWN") + +/* + * HID requests + */ +#define USB_REQ_GET_REPORT 0x01 +#define USB_REQ_GET_IDLE 0x02 +#define USB_REQ_GET_PROTOCOL 0x03 +#define USB_REQ_SET_REPORT 0x09 +#define USB_REQ_SET_IDLE 0x0A +#define USB_REQ_SET_PROTOCOL 0x0B + + +/* + * USB Spec Release number + */ + +#define USB_BCD_VERSION 0x0110 + + +/* + * Device Requests (c.f Table 9-2) + */ + +#define USB_REQ_DIRECTION_MASK 0x80 +#define USB_REQ_TYPE_MASK 0x60 +#define USB_REQ_RECIPIENT_MASK 0x1f + +#define USB_REQ_DEVICE2HOST 0x80 +#define USB_REQ_HOST2DEVICE 0x00 + +#define USB_REQ_TYPE_STANDARD 0x00 +#define USB_REQ_TYPE_CLASS 0x20 +#define USB_REQ_TYPE_VENDOR 0x40 + +#define USB_REQ_RECIPIENT_DEVICE 0x00 +#define USB_REQ_RECIPIENT_INTERFACE 0x01 +#define USB_REQ_RECIPIENT_ENDPOINT 0x02 +#define USB_REQ_RECIPIENT_OTHER 0x03 + +/* + * get status bits + */ + +#define USB_STATUS_SELFPOWERED 0x01 +#define USB_STATUS_REMOTEWAKEUP 0x02 + +#define USB_STATUS_HALT 0x01 + +/* + * descriptor types + */ + +#define USB_DESCRIPTOR_TYPE_DEVICE 0x01 +#define USB_DESCRIPTOR_TYPE_CONFIGURATION 0x02 +#define USB_DESCRIPTOR_TYPE_STRING 0x03 +#define USB_DESCRIPTOR_TYPE_INTERFACE 0x04 +#define USB_DESCRIPTOR_TYPE_ENDPOINT 0x05 +#define USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER 0x06 +#define USB_DESCRIPTOR_TYPE_OTHER_SPEED_CONFIGURATION 0x07 +#define USB_DESCRIPTOR_TYPE_INTERFACE_POWER 0x08 +#define USB_DESCRIPTOR_TYPE_HID 0x21 +#define USB_DESCRIPTOR_TYPE_REPORT 0x22 + +#define USBD_DEVICE_DESCRIPTORS(x) (((unsigned int)x <= USB_DESCRIPTOR_TYPE_INTERFACE_POWER) ? \ + usbd_device_descriptors[x] : "UNKNOWN") + +/* + * standard feature selectors + */ +#define USB_ENDPOINT_HALT 0x00 +#define USB_DEVICE_REMOTE_WAKEUP 0x01 +#define USB_TEST_MODE 0x02 + + +/* USB Requests + * + */ + +struct usb_device_request { + u8 bmRequestType; + u8 bRequest; + u16 wValue; + u16 wIndex; + u16 wLength; +} __attribute__ ((packed)); + + +/* USB Status + * + */ +typedef enum urb_send_status { + SEND_IN_PROGRESS, + SEND_FINISHED_OK, + SEND_FINISHED_ERROR, + RECV_READY, + RECV_OK, + RECV_ERROR +} urb_send_status_t; + +/* + * Device State (c.f USB Spec 2.0 Figure 9-1) + * + * What state the usb device is in. + * + * Note the state does not change if the device is suspended, we simply set a + * flag to show that it is suspended. + * + */ +typedef enum usb_device_state { + STATE_INIT, /* just initialized */ + STATE_CREATED, /* just created */ + STATE_ATTACHED, /* we are attached */ + STATE_POWERED, /* we have seen power indication (electrical bus signal) */ + STATE_DEFAULT, /* we been reset */ + STATE_ADDRESSED, /* we have been addressed (in default configuration) */ + STATE_CONFIGURED, /* we have seen a set configuration device command */ + STATE_UNKNOWN, /* destroyed */ +} usb_device_state_t; + +#define USBD_DEVICE_STATE(x) (((unsigned int)x <= STATE_UNKNOWN) ? usbd_device_states[x] : "UNKNOWN") + +/* + * Device status + * + * Overall state + */ +typedef enum usb_device_status { + USBD_OPENING, /* we are currently opening */ + USBD_OK, /* ok to use */ + USBD_SUSPENDED, /* we are currently suspended */ + USBD_CLOSING, /* we are currently closing */ +} usb_device_status_t; + +#define USBD_DEVICE_STATUS(x) (((unsigned int)x <= USBD_CLOSING) ? usbd_device_status[x] : "UNKNOWN") + +/* + * Device Events + * + * These are defined in the USB Spec (c.f USB Spec 2.0 Figure 9-1). + * + * There are additional events defined to handle some extra actions we need + * to have handled. + * + */ +typedef enum usb_device_event { + + DEVICE_UNKNOWN, /* bi - unknown event */ + DEVICE_INIT, /* bi - initialize */ + DEVICE_CREATE, /* bi - */ + DEVICE_HUB_CONFIGURED, /* bi - bus has been plugged int */ + DEVICE_RESET, /* bi - hub has powered our port */ + + DEVICE_ADDRESS_ASSIGNED, /* ep0 - set address setup received */ + DEVICE_CONFIGURED, /* ep0 - set configure setup received */ + DEVICE_SET_INTERFACE, /* ep0 - set interface setup received */ + + DEVICE_SET_FEATURE, /* ep0 - set feature setup received */ + DEVICE_CLEAR_FEATURE, /* ep0 - clear feature setup received */ + + DEVICE_DE_CONFIGURED, /* ep0 - set configure setup received for ?? */ + + DEVICE_BUS_INACTIVE, /* bi - bus in inactive (no SOF packets) */ + DEVICE_BUS_ACTIVITY, /* bi - bus is active again */ + + DEVICE_POWER_INTERRUPTION, /* bi - hub has depowered our port */ + DEVICE_HUB_RESET, /* bi - bus has been unplugged */ + DEVICE_DESTROY, /* bi - device instance should be destroyed */ + + DEVICE_HOTPLUG, /* bi - a hotplug event has occured */ + + DEVICE_FUNCTION_PRIVATE, /* function - private */ + +} usb_device_event_t; + + +typedef struct urb_link { + struct urb_link *next; + struct urb_link *prev; +} urb_link; + +/* USB Data structure - for passing data around. + * + * This is used for both sending and receiving data. + * + * The callback function is used to let the function driver know when + * transmitted data has been sent. + * + * The callback function is set by the alloc_recv function when an urb is + * allocated for receiving data for an endpoint and used to call the + * function driver to inform it that data has arrived. + */ + +#define URB_BUF_SIZE 128 /* in linux we'd malloc this, but in u-boot we prefer static data */ +struct urb { + + struct usb_endpoint_instance *endpoint; + struct usb_device_instance *device; + + struct usb_device_request device_request; /* contents of received SETUP packet */ + + struct urb_link link; /* embedded struct for circular doubly linked list of urbs */ + + u8* buffer; + unsigned int buffer_length; + unsigned int actual_length; + + urb_send_status_t status; + int data; + + u16 buffer_data[URB_BUF_SIZE]; /* data received (OUT) or being sent (IN) */ +}; + +/* Endpoint configuration + * + * Per endpoint configuration data. Used to track which function driver owns + * an endpoint. + * + */ +struct usb_endpoint_instance { + int endpoint_address; /* logical endpoint address */ + + /* control */ + int status; /* halted */ + int state; /* available for use by bus interface driver */ + + /* receive side */ + struct urb_link rcv; /* received urbs */ + struct urb_link rdy; /* empty urbs ready to receive */ + struct urb *rcv_urb; /* active urb */ + int rcv_attributes; /* copy of bmAttributes from endpoint descriptor */ + int rcv_packetSize; /* maximum packet size from endpoint descriptor */ + int rcv_transferSize; /* maximum transfer size from function driver */ + int rcv_queue; + + /* transmit side */ + struct urb_link tx; /* urbs ready to transmit */ + struct urb_link done; /* transmitted urbs */ + struct urb *tx_urb; /* active urb */ + int tx_attributes; /* copy of bmAttributes from endpoint descriptor */ + int tx_packetSize; /* maximum packet size from endpoint descriptor */ + int tx_transferSize; /* maximum transfer size from function driver */ + int tx_queue; + + int sent; /* data already sent */ + int last; /* data sent in last packet XXX do we need this */ +}; + +struct usb_alternate_instance { + struct usb_interface_descriptor *interface_descriptor; + + int endpoints; + int *endpoint_transfersize_array; + struct usb_endpoint_descriptor **endpoints_descriptor_array; +}; + +struct usb_interface_instance { + int alternates; + struct usb_alternate_instance *alternates_instance_array; +}; + +struct usb_configuration_instance { + int interfaces; + struct usb_configuration_descriptor *configuration_descriptor; + struct usb_interface_instance *interface_instance_array; +}; + + +/* USB Device Instance + * + * For each physical bus interface we create a logical device structure. This + * tracks all of the required state to track the USB HOST's view of the device. + * + * Keep track of the device configuration for a real physical bus interface, + * this includes the bus interface, multiple function drivers, the current + * configuration and the current state. + * + * This will show: + * the specific bus interface driver + * the default endpoint 0 driver + * the configured function driver + * device state + * device status + * endpoint list + */ + +struct usb_device_instance { + + /* generic */ + char *name; + struct usb_device_descriptor *device_descriptor; /* per device descriptor */ + + void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data); + + /* Do cdc device specific control requests */ + int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb); + + /* bus interface */ + struct usb_bus_instance *bus; /* which bus interface driver */ + + /* configuration descriptors */ + int configurations; + struct usb_configuration_instance *configuration_instance_array; + + /* device state */ + usb_device_state_t device_state; /* current USB Device state */ + usb_device_state_t device_previous_state; /* current USB Device state */ + + u8 address; /* current address (zero is default) */ + u8 configuration; /* current show configuration (zero is default) */ + u8 interface; /* current interface (zero is default) */ + u8 alternate; /* alternate flag */ + + usb_device_status_t status; /* device status */ + + int urbs_queued; /* number of submitted urbs */ + + /* Shouldn't need to make this atomic, all we need is a change indicator */ + unsigned long usbd_rxtx_timestamp; + unsigned long usbd_last_rxtx_timestamp; + +}; + +/* Bus Interface configuration structure + * + * This is allocated for each configured instance of a bus interface driver. + * + * The privdata pointer may be used by the bus interface driver to store private + * per instance state information. + */ +struct usb_bus_instance { + + struct usb_device_instance *device; + struct usb_endpoint_instance *endpoint_array; /* array of available configured endpoints */ + + int max_endpoints; /* maximimum number of rx enpoints */ + unsigned char maxpacketsize; + + unsigned int serial_number; + char *serial_number_str; + void *privdata; /* private data for the bus interface */ + +}; + +extern char *usbd_device_events[]; +extern char *usbd_device_states[]; +extern char *usbd_device_status[]; +extern char *usbd_device_requests[]; +extern char *usbd_device_descriptors[]; + +void urb_link_init (urb_link * ul); +void urb_detach (struct urb *urb); +urb_link *first_urb_link (urb_link * hd); +struct urb *first_urb (urb_link * hd); +struct urb *first_urb_detached (urb_link * hd); +void urb_append (urb_link * hd, struct urb *urb); + +struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint); +void usbd_dealloc_urb (struct urb *urb); + +/* + * usbd_device_event is used by bus interface drivers to tell the higher layers that + * certain events have taken place. + */ +void usbd_device_event_irq (struct usb_device_instance *conf, usb_device_event_t, int); +void usbd_device_event (struct usb_device_instance *conf, usb_device_event_t, int); + +/* descriptors + * + * Various ways of finding descriptors based on the current device and any + * possible configuration / interface / endpoint for it. + */ +struct usb_configuration_descriptor *usbd_device_configuration_descriptor (struct usb_device_instance *, int, int); +struct usb_function_instance *usbd_device_function_instance (struct usb_device_instance *, unsigned int); +struct usb_interface_instance *usbd_device_interface_instance (struct usb_device_instance *, int, int, int); +struct usb_alternate_instance *usbd_device_alternate_instance (struct usb_device_instance *, int, int, int, int); +struct usb_interface_descriptor *usbd_device_interface_descriptor (struct usb_device_instance *, int, int, int, int); +struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor_index (struct usb_device_instance *, int, int, int, int, int); +struct usb_class_descriptor *usbd_device_class_descriptor_index (struct usb_device_instance *, int, int, int, int, int); +struct usb_class_report_descriptor *usbd_device_class_report_descriptor_index( struct usb_device_instance *, int , int , int , int , int ); +struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor (struct usb_device_instance *, int, int, int, int, int); +int usbd_device_endpoint_transfersize (struct usb_device_instance *, int, int, int, int, int); +struct usb_string_descriptor *usbd_get_string (u8); +struct usb_device_descriptor *usbd_device_device_descriptor (struct usb_device_instance *, int); + +int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint); +void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad); +void usbd_tx_complete (struct usb_endpoint_instance *endpoint); + +#endif |