diff options
Diffstat (limited to 'u-boot/arch/arm/cpu/arm926ejs/at91')
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/Makefile | 63 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c | 205 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 236 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 160 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 214 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 187 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 123 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/clock.c | 215 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/config.mk | 1 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/cpu.c | 100 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/eflash.c | 270 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/led.c | 65 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 274 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/reset.c | 45 | ||||
| -rw-r--r-- | u-boot/arch/arm/cpu/arm926ejs/at91/timer.c | 141 |
15 files changed, 2299 insertions, 0 deletions
diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/Makefile b/u-boot/arch/arm/cpu/arm926ejs/at91/Makefile new file mode 100644 index 0000000..be9f6dd --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/Makefile @@ -0,0 +1,63 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-$(CONFIG_AT91CAP9) += at91cap9_devices.o +COBJS-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o +COBJS-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o +COBJS-$(CONFIG_AT91SAM9261) += at91sam9261_devices.o +COBJS-$(CONFIG_AT91SAM9G10) += at91sam9261_devices.o +COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o +COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o +COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91_EFLASH) += eflash.o +COBJS-$(CONFIG_AT91_LED) += led.o +COBJS-y += clock.o +COBJS-y += cpu.o +COBJS-y += reset.o +COBJS-y += timer.o + +ifndef CONFIG_SKIP_LOWLEVEL_INIT +SOBJS-y := lowlevel_init.o +endif + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c b/u-boot/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c new file mode 100644 index 0000000..2d878fd --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c @@ -0,0 +1,205 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2009 + * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> + * esd electronic system design gmbh <www.esd.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* RXD0 */ + writel(1 << AT91CAP9_ID_US0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */ + writel(1 << AT91CAP9_ID_US1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */ + writel(1 << AT91CAP9_ID_US2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */ + writel(1 << AT91_ID_SYS, &pmc->pcer); +} + +void at91_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_serial0_hw_init(); +#endif + +#ifdef CONFIG_USART1 + at91_serial1_hw_init(); +#endif + +#ifdef CONFIG_USART2 + at91_serial2_hw_init(); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_serial3_hw_init(); +#endif +} + +#ifdef CONFIG_HAS_DATAFLASH +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << AT91CAP9_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_b_periph(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTD, 0, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTD, 1, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTD, 0, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTD, 1, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << AT91CAP9_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 15, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_a_periph(AT91_PIO_PORTB, 16, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTB, 17, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTB, 18, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 15, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTB, 16, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTB, 17, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTB, 18, 1); + } + +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 21, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTB, 22, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTB, 25, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 26, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 27, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTB, 23, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 24, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */ + at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */ + at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */ +#endif +} +#endif + +#ifdef CONFIG_AT91_CAN +void at91_can_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* CAN_TX */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* CAN_RX */ + + /* Enable clock */ + writel(1 << AT91CAP9_ID_CAN, &pmc->pcer); +} +#endif diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c new file mode 100644 index 0000000..c1822b7 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */ + writel(1 << AT91SAM9260_ID_US0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */ + writel(1 << AT91SAM9260_ID_US1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */ + writel(1 << AT91SAM9260_ID_US2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */ + writel(1 << AT91_ID_SYS, &pmc->pcer); +} + +void at91_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_serial0_hw_init(); +#endif + +#ifdef CONFIG_USART1 + at91_serial1_hw_init(); +#endif + +#ifdef CONFIG_USART2 + at91_serial2_hw_init(); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_serial3_hw_init(); +#endif +} + +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9260_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTC, 11, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTC, 16, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTC, 17, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTC, 11, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTC, 16, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTC, 17, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9260_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTC, 5, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTC, 4, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_pio_output(AT91_PIO_PORTC, 3, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTC, 5, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTC, 4, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTC, 3, 1); + } +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */ +#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260) + /* + * use PA10, PA11 for ETX2, ETX3. + * PA23 and PA24 are for TWI EEPROM + */ + at91_set_b_periph(AT91_PIO_PORTA, 10, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 11, 0); /* ETX3 */ +#else + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */ +#if defined(CONFIG_AT91SAM9G20) + /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */ + at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0); + at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0); +#endif +#endif + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */ +#endif +} +#endif + +#if defined(CONFIG_ATMEL_MCI) || defined(CONFIG_GENERIC_ATMEL_MCI) +void at91_mci_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ +#if defined(CONFIG_ATMEL_MCI_PORTB) + at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */ + at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */ + at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */ + at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */ + at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */ +#else + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */ +#endif +} +#endif diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c new file mode 100644 index 0000000..b4353ef --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c @@ -0,0 +1,160 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */ + writel(1 << AT91SAM9261_ID_US0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */ + writel(1 << AT91SAM9261_ID_US1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */ + writel(1 << AT91SAM9261_ID_US2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + writel(1 << AT91_ID_SYS, &pmc->pcer); +} + +void at91_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_serial0_hw_init(); +#endif + +#ifdef CONFIG_USART1 + at91_serial1_hw_init(); +#endif + +#ifdef CONFIG_USART2 + at91_serial2_hw_init(); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_serial3_hw_init(); +#endif +} + +#ifdef CONFIG_HAS_DATAFLASH +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9261_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_a_periph(AT91_PIO_PORTA, 4, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTA, 6, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTA, 4, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTA, 6, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 31, 0); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9261_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 28, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTA, 24, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTA, 25, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTA, 26, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 28, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTA, 24, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTA, 25, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTA, 26, 1); + } +} +#endif diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c new file mode 100644 index 0000000..deda3e5 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c @@ -0,0 +1,214 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2009 + * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> + * esd electronic system design gmbh <www.esd.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pio.h> + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */ + writel(1 << AT91SAM9263_ID_US0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */ + writel(1 << AT91SAM9263_ID_US1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */ + writel(1 << AT91SAM9263_ID_US2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */ + writel(1 << AT91_ID_SYS, &pmc->pcer); +} + +void at91_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_serial0_hw_init(); +#endif + +#ifdef CONFIG_USART1 + at91_serial1_hw_init(); +#endif + +#ifdef CONFIG_USART2 + at91_serial2_hw_init(); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_serial3_hw_init(); +#endif +} + +#ifdef CONFIG_HAS_DATAFLASH +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9263_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_b_periph(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTA, 4, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTB, 11, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTA, 4, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTB, 11, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9263_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 15, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_a_periph(AT91_PIO_PORTB, 16, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTB, 17, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTB, 18, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 15, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTB, 16, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTB, 17, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTB, 18, 1); + } +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTE, 21, 0); /* ETXCK_EREFCK */ + at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTE, 25, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTE, 26, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTE, 27, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTE, 28, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTE, 23, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTE, 24, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTE, 30, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTE, 29, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_a_periph(AT91_PIO_PORTE, 22, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */ + at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */ + at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */ +#endif +} +#endif + +#ifdef CONFIG_USB_OHCI_NEW +void at91_uhp_hw_init(void) +{ + /* Enable VBus on UHP ports */ + at91_set_pio_output(AT91_PIO_PORTA, 21, 0); + at91_set_pio_output(AT91_PIO_PORTA, 24, 0); +} +#endif + +#ifdef CONFIG_AT91_CAN +void at91_can_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CAN_TX */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 1); /* CAN_RX */ + + /* Enable clock */ + writel(1 << AT91SAM9263_ID_CAN, &pmc->pcer); +} +#endif diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c new file mode 100644 index 0000000..4ad9b1f --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* RXD0 */ + writel(1 << AT91SAM9G45_ID_US0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* RXD1 */ + writel(1 << AT91SAM9G45_ID_US1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* RXD2 */ + writel(1 << AT91SAM9G45_ID_US2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */ + writel(1 << AT91_ID_SYS, &pmc->pcer); +} + +void at91_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_serial0_hw_init(); +#endif + +#ifdef CONFIG_USART1 + at91_serial1_hw_init(); +#endif + +#ifdef CONFIG_USART2 + at91_serial2_hw_init(); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_serial3_hw_init(); +#endif +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9G45_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTB, 18, 0); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTB, 19, 0); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTD, 27, 0); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 3, 0); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTB, 18, 0); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTB, 19, 0); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTD, 27, 0); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9G45_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTD, 28, 0); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTD, 18, 0); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTD, 19, 0); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 17, 0); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTD, 28, 0); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTD, 18, 0); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTD, 19, 0); + } + +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* EMDC */ +#ifndef CONFIG_RMII + at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTA, 30, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTA, 8, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 9, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ERXCK */ + at91_set_b_periph(AT91_PIO_PORTA, 6, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 7, 0); /* ETX3 */ + at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ETXER */ +#endif +} +#endif diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c new file mode 100644 index 0000000..4f570f4 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* RXD0 */ + writel(1 << AT91SAM9RL_ID_US0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* RXD1 */ + writel(1 << AT91SAM9RL_ID_US1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* RXD2 */ + writel(1 << AT91SAM9RL_ID_US2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */ + writel(1 << AT91_ID_SYS, &pmc->pcer); +} + +void at91_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_serial0_hw_init(); +#endif + +#ifdef CONFIG_USART1 + at91_serial1_hw_init(); +#endif + +#ifdef CONFIG_USART2 + at91_serial2_hw_init(); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_serial3_hw_init(); +#endif +} + +#ifdef CONFIG_HAS_DATAFLASH +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << AT91SAM9RL_ID_SPI, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTA, 28, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTB, 7, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTD, 8, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTD, 9, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 28, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTB, 7, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTD, 8, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTD, 9, 1); + } +} +#endif diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/clock.c b/u-boot/arch/arm/cpu/arm926ejs/at91/clock.c new file mode 100644 index 0000000..7a10a77 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/clock.c @@ -0,0 +1,215 @@ +/* + * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] + * + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +unsigned long get_cpu_clk_rate(void) +{ + return gd->cpu_clk_rate_hz; +} + +unsigned long get_main_clk_rate(void) +{ + return gd->main_clk_rate_hz; +} + +unsigned long get_mck_clk_rate(void) +{ + return gd->mck_rate_hz; +} + +unsigned long get_plla_clk_rate(void) +{ + return gd->plla_rate_hz; +} + +unsigned long get_pllb_clk_rate(void) +{ + return gd->pllb_rate_hz; +} + +u32 get_pllb_init(void) +{ + return gd->at91_pllb_usb_init; +} + +static unsigned long at91_css_to_rate(unsigned long css) +{ + switch (css) { + case AT91_PMC_MCKR_CSS_SLOW: + return AT91_SLOW_CLOCK; + case AT91_PMC_MCKR_CSS_MAIN: + return gd->main_clk_rate_hz; + case AT91_PMC_MCKR_CSS_PLLA: + return gd->plla_rate_hz; + case AT91_PMC_MCKR_CSS_PLLB: + return gd->pllb_rate_hz; + } + + return 0; +} + +#ifdef CONFIG_USB_ATMEL +static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq) +{ + unsigned i, div = 0, mul = 0, diff = 1 << 30; + unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; + + /* PLL output max 240 MHz (or 180 MHz per errata) */ + if (out_freq > 240000000) + goto fail; + + for (i = 1; i < 256; i++) { + int diff1; + unsigned input, mul1; + + /* + * PLL input between 1MHz and 32MHz per spec, but lower + * frequences seem necessary in some cases so allow 100K. + * Warning: some newer products need 2MHz min. + */ + input = main_freq / i; +#if defined(CONFIG_AT91SAM9G20) + if (input < 2000000) + continue; +#endif + if (input < 100000) + continue; + if (input > 32000000) + continue; + + mul1 = out_freq / input; +#if defined(CONFIG_AT91SAM9G20) + if (mul > 63) + continue; +#endif + if (mul1 > 2048) + continue; + if (mul1 < 2) + goto fail; + + diff1 = out_freq - input * mul1; + if (diff1 < 0) + diff1 = -diff1; + if (diff > diff1) { + diff = diff1; + div = i; + mul = mul1; + if (diff == 0) + break; + } + } + if (i == 256 && diff > (out_freq >> 5)) + goto fail; + return ret | ((mul - 1) << 16) | div; +fail: + return 0; +} +#endif + +static u32 at91_pll_rate(u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 16) & 0x7ff; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else + freq = 0; + + return freq; +} + +int at91_clock_init(unsigned long main_clock) +{ + unsigned freq, mckr; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK + unsigned tmp; + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = readl(&pmc->mcfr); + } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); + tmp &= AT91_PMC_MCFR_MAINF_MASK; + main_clock = tmp * (AT91_SLOW_CLOCK / 16); + } +#endif + gd->main_clk_rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); + +#ifdef CONFIG_USB_ATMEL + /* + * USB clock init: choose 48 MHz PLLB value, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | + AT91_PMC_PLLBR_USBDIV_2; + gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init); +#endif + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = readl(&pmc->mckr); +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) + /* plla divisor by 2 */ + gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); +#endif + gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); + freq = gd->mck_rate_hz; + + freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */ +#if defined(CONFIG_AT91RM9200) + /* mdiv */ + gd->mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); +#elif defined(CONFIG_AT91SAM9G20) + /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ + gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ? + freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq; + if (mckr & AT91_PMC_MCKR_MDIV_MASK) + freq /= 2; /* processor clock division */ +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) + gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == + (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4) + ? freq / 3 + : freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); +#else + gd->mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); +#endif + gd->cpu_clk_rate_hz = freq; + + return 0; +} diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/config.mk b/u-boot/arch/arm/cpu/arm926ejs/at91/config.mk new file mode 100644 index 0000000..19296fd --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/config.mk @@ -0,0 +1 @@ +PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,) diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/cpu.c b/u-boot/arch/arm/cpu/arm926ejs/at91/cpu.c new file mode 100644 index 0000000..5e30f1d --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/cpu.c @@ -0,0 +1,100 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, reinhard.meyer@emk-elektronik.de + * (C) Copyright 2009 + * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_gpbr.h> +#include <asm/arch/clk.h> +#include <asm/arch/io.h> + +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#endif + +int arch_cpu_init(void) +{ + return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); +} + +void arch_preboot_os(void) +{ + ulong cpiv; + at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE; + + cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir)); + + /* + * Disable PITC + * Add 0x1000 to current counter to stop it faster + * without waiting for wrapping back to 0 + */ + writel(cpiv + 0x1000, &pit->mr); +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + char buf[32]; + + printf("CPU: %s\n", CONFIG_SYS_AT91_CPU_NAME); + printf("Crystal frequency: %8s MHz\n", + strmhz(buf, get_main_clk_rate())); + printf("CPU clock : %8s MHz\n", + strmhz(buf, get_cpu_clk_rate())); + printf("Master clock : %8s MHz\n", + strmhz(buf, get_mck_clk_rate())); + + return 0; +} +#endif + +#ifdef CONFIG_BOOTCOUNT_LIMIT +/* + * We combine the BOOTCOUNT_MAGIC and bootcount in one 32-bit register. + * This is done so we need to use only one of the four GPBR registers. + */ +void bootcount_store (ulong a) +{ + at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE; + + writel((BOOTCOUNT_MAGIC & 0xffff0000) | (a & 0x0000ffff), + &gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]); +} + +ulong bootcount_load (void) +{ + at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE; + + ulong val = readl(&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]); + if ((val & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000)) + return 0; + else + return val & 0x0000ffff; +} + +#endif /* CONFIG_BOOTCOUNT_LIMIT */ diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/eflash.c b/u-boot/arch/arm/cpu/arm926ejs/at91/eflash.c new file mode 100644 index 0000000..938c3b1 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/eflash.c @@ -0,0 +1,270 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * this driver supports the enhanced embedded flash in the Atmel + * AT91SAM9XE devices with the following geometry: + * + * AT91SAM9XE128: 1 plane of 8 regions of 32 pages (total 256 pages) + * AT91SAM9XE256: 1 plane of 16 regions of 32 pages (total 512 pages) + * AT91SAM9XE512: 1 plane of 32 regions of 32 pages (total 1024 pages) + * (the exact geometry is read from the flash at runtime, so any + * future devices should already be covered) + * + * Regions can be write/erase protected. + * Whole (!) pages can be individually written with erase on the fly. + * Writing partial pages will corrupt the rest of the page. + * + * The flash is presented to u-boot with each region being a sector, + * having the following effects: + * Each sector can be hardware protected (protect on/off). + * Each page in a sector can be rewritten anytime. + * Since pages are erased when written, the "erase" does nothing. + * The first "CONFIG_EFLASH_PROTSECTORS" cannot be unprotected + * by u-Boot commands. + * + * Note: Redundant environment will not work in this flash since + * it does use partial page writes. Make sure the environent spans + * whole pages! + */ + +/* + * optional TODOs (nice to have features): + * + * make the driver coexist with other NOR flash drivers + * (use an index into flash_info[], requires work + * in those other drivers, too) + * Make the erase command fill the sectors with 0xff + * (if the flashes grow larger in the future and + * someone puts a jffs2 into them) + * do a read-modify-write for partially programmed pages + */ +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_eefc.h> +#include <asm/arch/at91_dbu.h> + +/* checks to detect configuration errors */ +#if CONFIG_SYS_MAX_FLASH_BANKS!=1 +#error eflash: this driver can only handle 1 bank +#endif + +/* global structure */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; +static u32 pagesize; + +unsigned long flash_init (void) +{ + at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00; + at91_dbu_t *dbu = (at91_dbu_t *) 0xfffff200; + u32 id, size, nplanes, planesize, nlocks; + u32 addr, i, tmp=0; + + debug("eflash: init\n"); + + flash_info[0].flash_id = FLASH_UNKNOWN; + + /* check if its an AT91ARM9XE SoC */ + if ((readl(&dbu->cidr) & AT91_DBU_CID_ARCH_MASK) != AT91_DBU_CID_ARCH_9XExx) { + puts("eflash: not an AT91SAM9XE\n"); + return 0; + } + + /* now query the eflash for its structure */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GETD, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + id = readl(&eefc->frr); /* word 0 */ + size = readl(&eefc->frr); /* word 1 */ + pagesize = readl(&eefc->frr); /* word 2 */ + nplanes = readl(&eefc->frr); /* word 3 */ + planesize = readl(&eefc->frr); /* word 4 */ + debug("id=%08x size=%u pagesize=%u planes=%u planesize=%u\n", + id, size, pagesize, nplanes, planesize); + for (i=1; i<nplanes; i++) { + tmp = readl(&eefc->frr); /* words 5..4+nplanes-1 */ + }; + nlocks = readl(&eefc->frr); /* word 4+nplanes */ + debug("nlocks=%u\n", nlocks); + /* since we are going to use the lock regions as sectors, check count */ + if (nlocks > CONFIG_SYS_MAX_FLASH_SECT) { + printf("eflash: number of lock regions(%u) "\ + "> CONFIG_SYS_MAX_FLASH_SECT. reducing...\n", + nlocks); + nlocks = CONFIG_SYS_MAX_FLASH_SECT; + } + flash_info[0].size = size; + flash_info[0].sector_count = nlocks; + flash_info[0].flash_id = id; + + addr = AT91SAM9XE_FLASH_BASE; + for (i=0; i<nlocks; i++) { + tmp = readl(&eefc->frr); /* words 4+nplanes+1.. */ + flash_info[0].start[i] = addr; + flash_info[0].protect[i] = 0; + addr += tmp; + }; + + /* now read the protection information for all regions */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + for (i=0; i<flash_info[0].sector_count; i++) { + if (i%32 == 0) + tmp = readl(&eefc->frr); + flash_info[0].protect[i] = (tmp >> (i%32)) & 1; +#if defined(CONFIG_EFLASH_PROTSECTORS) + if (i < CONFIG_EFLASH_PROTSECTORS) + flash_info[0].protect[i] = 1; +#endif + } + + return size; +} + +void flash_print_info (flash_info_t *info) +{ + int i; + + puts("AT91SAM9XE embedded flash\n Size: "); + print_size(info->size, " in "); + printf("%d Sectors\n", info->sector_count); + + printf(" Sector Start Addresses:"); + for (i=0; i<info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); + return; +} + +int flash_real_protect (flash_info_t *info, long sector, int prot) +{ + at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00; + u32 pagenum = (info->start[sector]-AT91SAM9XE_FLASH_BASE)/pagesize; + u32 i, tmp=0; + + debug("protect sector=%ld prot=%d\n", sector, prot); + +#if defined(CONFIG_EFLASH_PROTSECTORS) + if (sector < CONFIG_EFLASH_PROTSECTORS) { + if (!prot) { + printf("eflash: sector %lu cannot be unprotected\n", + sector); + } + return 1; /* return anyway, caller does not care for result */ + } +#endif + if (prot) { + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_SLB | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + } else { + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_CLB | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + } + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + /* now re-read the protection information for all regions */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + for (i=0; i<info->sector_count; i++) { + if (i%32 == 0) + tmp = readl(&eefc->frr); + info->protect[i] = (tmp >> (i%32)) & 1; + } + return 0; +} + +static u32 erase_write_page (u32 pagenum) +{ + at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00; + + debug("erase+write page=%u\n", pagenum); + + /* give erase and write page command */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_EWP | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + /* return status */ + return readl(&eefc->fsr) + & (AT91_EEFC_FSR_FCMDE | AT91_EEFC_FSR_FLOCKE); +} + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + debug("erase first=%d last=%d\n", s_first, s_last); + puts("this flash does not need and support erasing!\n"); + return 0; +} + +/* + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + u32 pagenum; + u32 *src32, *dst32; + u32 i; + + debug("write src=%08lx addr=%08lx cnt=%lx\n", + (ulong)src, addr, cnt); + + /* REQUIRE addr to be on a page start, abort if not */ + if (addr % pagesize) { + printf ("eflash: start %08lx is not on page start\n"\ + " write aborted\n", addr); + return 1; + } + + /* now start copying data */ + pagenum = (addr-AT91SAM9XE_FLASH_BASE)/pagesize; + src32 = (u32 *) src; + dst32 = (u32 *) addr; + while (cnt > 0) { + i = pagesize / 4; + /* fill page buffer */ + while (i--) + *dst32++ = *src32++; + /* write page */ + if (erase_write_page(pagenum)) + return 1; + pagenum++; + if (cnt > pagesize) + cnt -= pagesize; + else + cnt = 0; + } + return 0; +} diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/led.c b/u-boot/arch/arm/cpu/arm926ejs/at91/led.c new file mode 100644 index 0000000..0a315c4 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/led.c @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +#ifdef CONFIG_RED_LED +void red_LED_on(void) +{ + at91_set_gpio_value(CONFIG_RED_LED, 1); +} + +void red_LED_off(void) +{ + at91_set_gpio_value(CONFIG_RED_LED, 0); +} +#endif + +#ifdef CONFIG_GREEN_LED +void green_LED_on(void) +{ + at91_set_gpio_value(CONFIG_GREEN_LED, 0); +} + +void green_LED_off(void) +{ + at91_set_gpio_value(CONFIG_GREEN_LED, 1); +} +#endif + +#ifdef CONFIG_YELLOW_LED +void yellow_LED_on(void) +{ + at91_set_gpio_value(CONFIG_YELLOW_LED, 0); +} + +void yellow_LED_off(void) +{ + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); +} +#endif diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/u-boot/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S new file mode 100644 index 0000000..7f7ca5e --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S @@ -0,0 +1,274 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_wdt.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/at91_matrix.h> +#include <asm/arch/at91sam9_sdramc.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_rstc.h> +#ifdef CONFIG_AT91_LEGACY +#include <asm/arch/at91sam9_matrix.h> +#endif +#ifndef CONFIG_SYS_MATRIX_EBICSA_VAL +#define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL +#endif + +_TEXT_BASE: + .word CONFIG_SYS_TEXT_BASE + +.globl lowlevel_init +.type lowlevel_init,function +lowlevel_init: + + mov r5, pc /* r5 = POS1 + 4 current */ +POS1: + ldr r0, =POS1 /* r0 = POS1 compile */ + ldr r2, _TEXT_BASE + sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */ + sub r5, r5, r0 /* r0 = CONFIG_SYS_TEXT_BASE-1 */ + sub r5, r5, #4 /* r1 = text base - current */ + + /* memory control configuration 1 */ + ldr r0, =SMRDATA + ldr r2, =SMRDATA1 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + sub r2, r2, r1 + add r0, r0, r5 + add r2, r2, r5 +0: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 0b + +/* ---------------------------------------------------------------------------- + * PMC Init Step 1. + * ---------------------------------------------------------------------------- + * - Check if the PLL is already initialized + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_ASM_PMC_MCKR) + ldr r0, [r1] + and r0, r0, #3 + cmp r0, #0 + bne PLL_setup_end + +/* --------------------------------------------------------------------------- + * - Enable the Main Oscillator + * --------------------------------------------------------------------------- + */ + ldr r1, =(AT91_ASM_PMC_MOR) + ldr r2, =(AT91_ASM_PMC_SR) + /* Main oscillator Enable register PMC_MOR: */ + ldr r0, =CONFIG_SYS_MOR_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Main Oscillator is enabled */ + mov r4, #AT91_PMC_IXR_MOSCS +MOSCS_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_IXR_MOSCS + bne MOSCS_Loop + +/* ---------------------------------------------------------------------------- + * PMC Init Step 2. + * ---------------------------------------------------------------------------- + * Setup PLLA + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_ASM_PMC_PLLAR) + ldr r0, =CONFIG_SYS_PLLAR_VAL + str r0, [r1] + + /* Reading the PMC Status register to detect when the PLLA is locked */ + mov r4, #AT91_PMC_IXR_LOCKA +MOSCS_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_IXR_LOCKA + bne MOSCS_Loop1 + +/* ---------------------------------------------------------------------------- + * PMC Init Step 3. + * ---------------------------------------------------------------------------- + * - Switch on the Main Oscillator + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_ASM_PMC_MCKR) + + /* -Master Clock Controller register PMC_MCKR */ + ldr r0, =CONFIG_SYS_MCKR1_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_IXR_MCKRDY +MCKRDY_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_IXR_MCKRDY + bne MCKRDY_Loop + + ldr r0, =CONFIG_SYS_MCKR2_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_IXR_MCKRDY +MCKRDY_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_IXR_MCKRDY + bne MCKRDY_Loop1 +PLL_setup_end: + +/* ---------------------------------------------------------------------------- + * - memory control configuration 2 + * ---------------------------------------------------------------------------- + */ + ldr r0, =(AT91_ASM_SDRAMC_TR) + ldr r1, [r0] + cmp r1, #0 + bne SDRAM_setup_end + + ldr r0, =SMRDATA1 + ldr r2, =SMRDATA2 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + sub r2, r2, r1 + add r0, r0, r5 + add r2, r2, r5 +2: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 2b + +SDRAM_setup_end: + /* everything is fine now */ + mov pc, lr + + .ltorg + +SMRDATA: + .word AT91_ASM_WDT_MR + .word CONFIG_SYS_WDTC_WDMR_VAL + /* configure PIOx as EBI0 D[16-31] */ +#if defined(CONFIG_AT91SAM9263) + .word AT91_ASM_PIOD_PDR + .word CONFIG_SYS_PIOD_PDR_VAL1 + .word AT91_ASM_PIOD_PUDR + .word CONFIG_SYS_PIOD_PPUDR_VAL + .word AT91_ASM_PIOD_ASR + .word CONFIG_SYS_PIOD_PPUDR_VAL +#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) \ + || defined(CONFIG_AT91SAM9G20) + .word AT91_ASM_PIOC_PDR + .word CONFIG_SYS_PIOC_PDR_VAL1 + .word AT91_ASM_PIOC_PUDR + .word CONFIG_SYS_PIOC_PPUDR_VAL +#endif + .word AT91_ASM_MATRIX_CSA0 + .word CONFIG_SYS_MATRIX_EBICSA_VAL + + /* flash */ + .word AT91_ASM_SMC_MODE0 + .word CONFIG_SYS_SMC0_MODE0_VAL + + .word AT91_ASM_SMC_CYCLE0 + .word CONFIG_SYS_SMC0_CYCLE0_VAL + + .word AT91_ASM_SMC_PULSE0 + .word CONFIG_SYS_SMC0_PULSE0_VAL + + .word AT91_ASM_SMC_SETUP0 + .word CONFIG_SYS_SMC0_SETUP0_VAL + +SMRDATA1: + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL1 + .word AT91_ASM_SDRAMC_TR + .word CONFIG_SYS_SDRC_TR_VAL1 + .word AT91_ASM_SDRAMC_CR + .word CONFIG_SYS_SDRC_CR_VAL + .word AT91_ASM_SDRAMC_MDR + .word CONFIG_SYS_SDRC_MDR_VAL + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL1 + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL3 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL3 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL4 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL5 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL6 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL7 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL8 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL9 + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL4 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL10 + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL5 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL11 + .word AT91_ASM_SDRAMC_TR + .word CONFIG_SYS_SDRC_TR_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL12 + /* User reset enable*/ + .word AT91_ASM_RSTC_MR + .word CONFIG_SYS_RSTC_RMR_VAL +#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP + /* MATRIX_MCFG - REMAP all masters */ + .word AT91_ASM_MATRIX_MCFG + .word 0x1FF +#endif +SMRDATA2: + .word 0 diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/reset.c b/u-boot/arch/arm/cpu/arm926ejs/at91/reset.c new file mode 100644 index 0000000..d2569d8 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/reset.c @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/io.h> + +/* Reset the cpu by telling the reset controller to do so */ +void reset_cpu(ulong ignored) +{ + at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE; + + writel(AT91_RSTC_KEY + | AT91_RSTC_CR_PROCRST /* Processor Reset */ + | AT91_RSTC_CR_PERRST /* Peripheral Reset */ +#ifdef CONFIG_AT91RESET_EXTRST + | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ +#endif + , &rstc->cr); + /* never reached */ + while (1) + ; +} diff --git a/u-boot/arch/arm/cpu/arm926ejs/at91/timer.c b/u-boot/arch/arm/cpu/arm926ejs/at91/timer.c new file mode 100644 index 0000000..82b8d7e --- /dev/null +++ b/u-boot/arch/arm/cpu/arm926ejs/at91/timer.c @@ -0,0 +1,141 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <asm/arch/io.h> +#include <div64.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by + * setting the 20 bit counter period to its maximum (0xfffff). + * (See the relevant data sheets to understand that this really works) + * + * We do also mimic the typical powerpc way of incrementing + * two 32 bit registers called tbl and tbu. + * + * Those registers increment at 1/16 the main clock rate. + */ + +#define TIMER_LOAD_VAL 0xfffff + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, gd->timer_rate_hz); + + return tick; +} + +static inline unsigned long long usec_to_tick(unsigned long long usec) +{ + usec *= gd->timer_rate_hz; + do_div(usec, 1000000); + + return usec; +} + +/* + * Use the PITC in full 32 bit incrementing mode + */ +int timer_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE; + + /* Enable PITC Clock */ + writel(1 << AT91_ID_SYS, &pmc->pcer); + + /* Enable PITC */ + writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); + + gd->timer_rate_hz = gd->mck_rate_hz / 16; + gd->tbu = gd->tbl = 0; + + return 0; +} + +/* + * Get the current 64 bit timer tick count + */ +unsigned long long get_ticks(void) +{ + at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE; + + ulong now = readl(&pit->piir); + + /* increment tbu if tbl has rolled over */ + if (now < gd->tbl) + gd->tbu++; + gd->tbl = now; + return (((unsigned long long)gd->tbu) << 32) | gd->tbl; +} + +void __udelay(unsigned long usec) +{ + unsigned long long tmp; + ulong tmo; + + tmo = usec_to_tick(usec); + tmp = get_ticks() + tmo; /* get current timestamp */ + + while (get_ticks() < tmp) /* loop till event */ + ; +} + +/* + * reset_timer() and get_timer(base) are a pair of functions that are used by + * some timeout/sleep mechanisms in u-boot. + * + * reset_timer() marks the current time as epoch and + * get_timer(base) works relative to that epoch. + * + * The time is used in CONFIG_SYS_HZ units! + */ +void reset_timer(void) +{ + gd->timer_reset_value = get_ticks(); +} + +ulong get_timer(ulong base) +{ + return tick_to_time(get_ticks() - gd->timer_reset_value) - base; +} + +/* + * Return the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return gd->timer_rate_hz; +} |