summaryrefslogtreecommitdiffstats
path: root/u-boot/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c
diff options
context:
space:
mode:
Diffstat (limited to 'u-boot/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c')
-rw-r--r--u-boot/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c1347
1 files changed, 1347 insertions, 0 deletions
diff --git a/u-boot/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c b/u-boot/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c
new file mode 100644
index 0000000..09f69ce
--- /dev/null
+++ b/u-boot/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c
@@ -0,0 +1,1347 @@
+/**
+ * @file IxQMgrDispatcher.c
+ *
+ * @author Intel Corporation
+ * @date 20-Dec-2001
+ *
+ * @brief This file contains the implementation of the Dispatcher sub component
+ *
+ *
+ * @par
+ * IXP400 SW Release version 2.0
+ *
+ * -- Copyright Notice --
+ *
+ * @par
+ * Copyright 2001-2005, Intel Corporation.
+ * All rights reserved.
+ *
+ * @par
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Intel Corporation nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @par
+ * -- End of Copyright Notice --
+*/
+
+/*
+ * User defined include files.
+ */
+#include "IxQMgr.h"
+#include "IxQMgrAqmIf_p.h"
+#include "IxQMgrQCfg_p.h"
+#include "IxQMgrDispatcher_p.h"
+#include "IxQMgrLog_p.h"
+#include "IxQMgrDefines_p.h"
+#include "IxFeatureCtrl.h"
+#include "IxOsal.h"
+
+
+
+/*
+ * #defines and macros used in this file.
+ */
+
+
+/*
+ * This constant is used to indicate the number of priority levels supported
+ */
+#define IX_QMGR_NUM_PRIORITY_LEVELS 3
+
+/*
+ * This constant is used to set the size of the array of status words
+ */
+#define MAX_Q_STATUS_WORDS 4
+
+/*
+ * This macro is used to check if a given priority is valid
+ */
+#define IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority) \
+(((priority) >= IX_QMGR_Q_PRIORITY_0) && ((priority) <= IX_QMGR_Q_PRIORITY_2))
+
+/*
+ * This macto is used to check that a given interrupt source is valid
+ */
+#define IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel) \
+(((srcSel) >= IX_QMGR_Q_SOURCE_ID_E) && ((srcSel) <= IX_QMGR_Q_SOURCE_ID_NOT_F))
+
+/*
+ * Number of times a dummy callback is called before logging a trace
+ * message
+ */
+#define LOG_THROTTLE_COUNT 1000000
+
+/* Priority tables limits */
+#define IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX (0)
+#define IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX (16)
+#define IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX (31)
+#define IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX (32)
+#define IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX (48)
+#define IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX (63)
+
+/*
+ * This macro is used to check if a given callback type is valid
+ */
+#define IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type) \
+ (((type) >= IX_QMGR_TYPE_REALTIME_OTHER) && \
+ ((type) <= IX_QMGR_TYPE_REALTIME_SPORADIC))
+
+/*
+ * define max index in lower queue to use in loops
+ */
+#define IX_QMGR_MAX_LOW_QUE_TABLE_INDEX (31)
+
+/*
+ * Typedefs whose scope is limited to this file.
+ */
+
+/*
+ * Information on a queue needed by the Dispatcher
+ */
+typedef struct
+{
+ IxQMgrCallback callback; /* Notification callback */
+ IxQMgrCallbackId callbackId; /* Notification callback identifier */
+ unsigned dummyCallbackCount; /* Number of times runs of dummy callback */
+ IxQMgrPriority priority; /* Dispatch priority */
+ unsigned int statusWordOffset; /* Offset to the status word to check */
+ UINT32 statusMask; /* Status mask */
+ UINT32 statusCheckValue; /* Status check value */
+ UINT32 intRegCheckMask; /* Interrupt register check mask */
+} IxQMgrQInfo;
+
+/*
+ * Variable declarations global to this file. Externs are followed by
+ * statics.
+ */
+
+/*
+ * Flag to keep record of what dispatcher set in featureCtrl when ixQMgrInit()
+ * is called. This is needed because it is possible that a client might
+ * change whether the live lock prevention dispatcher is used between
+ * calls to ixQMgrInit() and ixQMgrDispatcherLoopGet().
+ */
+PRIVATE IX_STATUS ixQMgrOrigB0Dispatcher = IX_FEATURE_CTRL_COMPONENT_ENABLED;
+
+/*
+ * keep record of Q types - not in IxQMgrQInfo for performance as
+ * it is only used with ixQMgrDispatcherLoopRunB0LLP()
+ */
+PRIVATE IxQMgrType ixQMgrQTypes[IX_QMGR_MAX_NUM_QUEUES];
+
+/*
+ * This array contains a list of queue identifiers ordered by priority. The table
+ * is split logically between queue identifiers 0-31 and 32-63.
+ */
+static IxQMgrQId priorityTable[IX_QMGR_MAX_NUM_QUEUES];
+
+/*
+ * This flag indicates to the dispatcher that the priority table needs to be rebuilt.
+ */
+static BOOL rebuildTable = FALSE;
+
+/* Dispatcher statistics */
+static IxQMgrDispatcherStats dispatcherStats;
+
+/* Table of queue information */
+static IxQMgrQInfo dispatchQInfo[IX_QMGR_MAX_NUM_QUEUES];
+
+/* Masks use to identify the first queues in the priority tables
+* when comparing with the interrupt register
+*/
+static unsigned int lowPriorityTableFirstHalfMask;
+static unsigned int uppPriorityTableFirstHalfMask;
+
+/*
+ * Static function prototypes
+ */
+
+/*
+ * This function is the default callback for all queues
+ */
+PRIVATE void
+dummyCallback (IxQMgrQId qId,
+ IxQMgrCallbackId cbId);
+
+PRIVATE void
+ixQMgrDispatcherReBuildPriorityTable (void);
+
+/*
+ * Function definitions.
+ */
+void
+ixQMgrDispatcherInit (void)
+{
+ int i;
+ IxFeatureCtrlProductId productId = 0;
+ IxFeatureCtrlDeviceId deviceId = 0;
+ BOOL stickyIntSilicon = TRUE;
+
+ /* Set default priorities */
+ for (i=0; i< IX_QMGR_MAX_NUM_QUEUES; i++)
+ {
+ dispatchQInfo[i].callback = dummyCallback;
+ dispatchQInfo[i].callbackId = 0;
+ dispatchQInfo[i].dummyCallbackCount = 0;
+ dispatchQInfo[i].priority = IX_QMGR_Q_PRIORITY_2;
+ dispatchQInfo[i].statusWordOffset = 0;
+ dispatchQInfo[i].statusCheckValue = 0;
+ dispatchQInfo[i].statusMask = 0;
+ /*
+ * There are two interrupt registers, 32 bits each. One for the lower
+ * queues(0-31) and one for the upper queues(32-63). Therefore need to
+ * mod by 32 i.e the min upper queue identifier.
+ */
+ dispatchQInfo[i].intRegCheckMask = (1<<(i%(IX_QMGR_MIN_QUEUPP_QID)));
+
+ /*
+ * Set the Q types - will only be used with livelock
+ */
+ ixQMgrQTypes[i] = IX_QMGR_TYPE_REALTIME_OTHER;
+
+ /* Reset queue statistics */
+ dispatcherStats.queueStats[i].callbackCnt = 0;
+ dispatcherStats.queueStats[i].priorityChangeCnt = 0;
+ dispatcherStats.queueStats[i].intNoCallbackCnt = 0;
+ dispatcherStats.queueStats[i].intLostCallbackCnt = 0;
+ dispatcherStats.queueStats[i].notificationEnabled = FALSE;
+ dispatcherStats.queueStats[i].srcSel = 0;
+
+ }
+
+ /* Priority table. Order the table from queue 0 to 63 */
+ ixQMgrDispatcherReBuildPriorityTable();
+
+ /* Reset statistics */
+ dispatcherStats.loopRunCnt = 0;
+
+ /* Get the device ID for the underlying silicon */
+ deviceId = ixFeatureCtrlDeviceRead();
+
+ /* Get the product ID for the underlying silicon */
+ productId = ixFeatureCtrlProductIdRead();
+
+ /*
+ * Check featureCtrl to see if Livelock prevention is required
+ */
+ ixQMgrOrigB0Dispatcher = ixFeatureCtrlSwConfigurationCheck(
+ IX_FEATURECTRL_ORIGB0_DISPATCHER);
+
+ /*
+ * Check if the silicon supports the sticky interrupt feature.
+ * IF (IXP42X AND A0) -> No sticky interrupt feature supported
+ */
+ if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X ==
+ (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) &&
+ (IX_FEATURE_CTRL_SILICON_TYPE_A0 ==
+ (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId)))
+ {
+ stickyIntSilicon = FALSE;
+ }
+
+ /*
+ * IF user wants livelock prev option AND silicon supports sticky interrupt
+ * feature -> enable the sticky interrupt bit
+ */
+ if ((IX_FEATURE_CTRL_SWCONFIG_DISABLED == ixQMgrOrigB0Dispatcher) &&
+ stickyIntSilicon)
+ {
+ ixQMgrStickyInterruptRegEnable();
+ }
+}
+
+IX_STATUS
+ixQMgrDispatcherPrioritySet (IxQMgrQId qId,
+ IxQMgrPriority priority)
+{
+ int ixQMgrLockKey;
+
+ if (!ixQMgrQIsConfigured(qId))
+ {
+ return IX_QMGR_Q_NOT_CONFIGURED;
+ }
+
+ if (!IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority))
+ {
+ return IX_QMGR_Q_INVALID_PRIORITY;
+ }
+
+ ixQMgrLockKey = ixOsalIrqLock();
+
+ /* Change priority */
+ dispatchQInfo[qId].priority = priority;
+ /* Set flag */
+ rebuildTable = TRUE;
+
+ ixOsalIrqUnlock(ixQMgrLockKey);
+
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qId].priorityChangeCnt++;
+#endif
+
+ return IX_SUCCESS;
+}
+
+IX_STATUS
+ixQMgrNotificationCallbackSet (IxQMgrQId qId,
+ IxQMgrCallback callback,
+ IxQMgrCallbackId callbackId)
+{
+ if (!ixQMgrQIsConfigured(qId))
+ {
+ return IX_QMGR_Q_NOT_CONFIGURED;
+ }
+
+ if (NULL == callback)
+ {
+ /* Reset to dummy callback */
+ dispatchQInfo[qId].callback = dummyCallback;
+ dispatchQInfo[qId].dummyCallbackCount = 0;
+ dispatchQInfo[qId].callbackId = 0;
+ }
+ else
+ {
+ dispatchQInfo[qId].callback = callback;
+ dispatchQInfo[qId].callbackId = callbackId;
+ }
+
+ return IX_SUCCESS;
+}
+
+IX_STATUS
+ixQMgrNotificationEnable (IxQMgrQId qId,
+ IxQMgrSourceId srcSel)
+{
+ IxQMgrQStatus qStatusOnEntry;/* The queue status on entry/exit */
+ IxQMgrQStatus qStatusOnExit; /* to this function */
+ int ixQMgrLockKey;
+
+#ifndef NDEBUG
+ if (!ixQMgrQIsConfigured (qId))
+ {
+ return IX_QMGR_Q_NOT_CONFIGURED;
+ }
+
+ if ((qId < IX_QMGR_MIN_QUEUPP_QID) &&
+ !IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel))
+ {
+ /* QId 0-31 source id invalid */
+ return IX_QMGR_INVALID_INT_SOURCE_ID;
+ }
+
+ if ((IX_QMGR_Q_SOURCE_ID_NE != srcSel) &&
+ (qId >= IX_QMGR_MIN_QUEUPP_QID))
+ {
+ /*
+ * For queues 32-63 the interrupt source is fixed to the Nearly
+ * Empty status flag and therefore should have a srcSel of NE.
+ */
+ return IX_QMGR_INVALID_INT_SOURCE_ID;
+ }
+#endif
+
+#ifndef NDEBUG
+ dispatcherStats.queueStats[qId].notificationEnabled = TRUE;
+ dispatcherStats.queueStats[qId].srcSel = srcSel;
+#endif
+
+ /* Get the current queue status */
+ ixQMgrAqmIfQueStatRead (qId, &qStatusOnEntry);
+
+ /*
+ * Enabling interrupts results in Read-Modify-Write
+ * so need critical section
+ */
+
+ ixQMgrLockKey = ixOsalIrqLock();
+
+ /* Calculate the checkMask and checkValue for this q */
+ ixQMgrAqmIfQStatusCheckValsCalc (qId,
+ srcSel,
+ &dispatchQInfo[qId].statusWordOffset,
+ &dispatchQInfo[qId].statusCheckValue,
+ &dispatchQInfo[qId].statusMask);
+
+
+ /* Set the interupt source is this queue is in the range 0-31 */
+ if (qId < IX_QMGR_MIN_QUEUPP_QID)
+ {
+ ixQMgrAqmIfIntSrcSelWrite (qId, srcSel);
+ }
+
+ /* Enable the interrupt */
+ ixQMgrAqmIfQInterruptEnable (qId);
+
+ ixOsalIrqUnlock(ixQMgrLockKey);
+
+ /* Get the current queue status */
+ ixQMgrAqmIfQueStatRead (qId, &qStatusOnExit);
+
+ /* If the status has changed return a warning */
+ if (qStatusOnEntry != qStatusOnExit)
+ {
+ return IX_QMGR_WARNING;
+ }
+
+ return IX_SUCCESS;
+}
+
+
+IX_STATUS
+ixQMgrNotificationDisable (IxQMgrQId qId)
+{
+ int ixQMgrLockKey;
+
+#ifndef NDEBUG
+ /* Validate parameters */
+ if (!ixQMgrQIsConfigured (qId))
+ {
+ return IX_QMGR_Q_NOT_CONFIGURED;
+ }
+#endif
+
+ /*
+ * Enabling interrupts results in Read-Modify-Write
+ * so need critical section
+ */
+#ifndef NDEBUG
+ dispatcherStats.queueStats[qId].notificationEnabled = FALSE;
+#endif
+
+ ixQMgrLockKey = ixOsalIrqLock();
+
+ ixQMgrAqmIfQInterruptDisable (qId);
+
+ ixOsalIrqUnlock(ixQMgrLockKey);
+
+ return IX_SUCCESS;
+}
+
+void
+ixQMgrStickyInterruptRegEnable(void)
+{
+ /* Use Aqm If function to set Interrupt Register0 Bit-3 */
+ ixQMgrAqmIfIntSrcSelReg0Bit3Set ();
+}
+
+#if !defined __XSCALE__ || defined __linux
+
+/* Count the number of leading zero bits in a word,
+ * and return the same value than the CLZ instruction.
+ *
+ * word (in) return value (out)
+ * 0x80000000 0
+ * 0x40000000 1
+ * ,,, ,,,
+ * 0x00000002 30
+ * 0x00000001 31
+ * 0x00000000 32
+ *
+ * The C version of this function is used as a replacement
+ * for system not providing the equivalent of the CLZ
+ * assembly language instruction.
+ *
+ * Note that this version is big-endian
+ */
+unsigned int
+ixQMgrCountLeadingZeros(UINT32 word)
+{
+ unsigned int leadingZerosCount = 0;
+
+ if (word == 0)
+ {
+ return 32;
+ }
+ /* search the first bit set by testing the MSB and shifting the input word */
+ while ((word & 0x80000000) == 0)
+ {
+ word <<= 1;
+ leadingZerosCount++;
+ }
+ return leadingZerosCount;
+}
+#endif /* not __XSCALE__ or __linux */
+
+void
+ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr)
+{
+ IxFeatureCtrlProductId productId = 0;
+ IxFeatureCtrlDeviceId deviceId = 0;
+
+ /* Get the device ID for the underlying silicon */
+ deviceId = ixFeatureCtrlDeviceRead();
+
+ /* Get the product ID for the underlying silicon */
+ productId = ixFeatureCtrlProductIdRead ();
+
+ /* IF (IXP42X AND A0 silicon) -> use ixQMgrDispatcherLoopRunA0 */
+ if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X ==
+ (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) &&
+ (IX_FEATURE_CTRL_SILICON_TYPE_A0 ==
+ (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId)))
+ {
+ /*For IXP42X A0 silicon */
+ *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunA0 ;
+ }
+ else /*For IXP42X B0 or IXP46X silicon*/
+ {
+ if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == ixQMgrOrigB0Dispatcher)
+ {
+ /* Default for IXP42X B0 and IXP46X silicon */
+ *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0;
+ }
+ else
+ {
+ /* FeatureCtrl indicated that livelock dispatcher be used */
+ *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0LLP;
+ }
+ }
+}
+
+void
+ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group)
+{
+ UINT32 intRegVal; /* Interrupt reg val */
+ UINT32 intRegValAfterWrite; /* Interrupt reg val after writing back */
+ UINT32 intRegCheckMask; /* Mask for checking interrupt bits */
+ UINT32 qStatusWordsB4Write[MAX_Q_STATUS_WORDS]; /* Status b4 interrupt write */
+ UINT32 qStatusWordsAfterWrite[MAX_Q_STATUS_WORDS]; /* Status after interrupt write */
+ IxQMgrQInfo *currDispatchQInfo;
+ BOOL statusChangeFlag;
+
+ int priorityTableIndex;/* Priority table index */
+ int qIndex; /* Current queue being processed */
+ int endIndex; /* Index of last queue to process */
+
+#ifndef NDEBUG
+ IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) ||
+ (group == IX_QMGR_QUELOW_GROUP));
+#endif
+
+ /* Read Q status registers before interrupt status read/write */
+ ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsB4Write);
+
+ /* Read the interrupt register */
+ ixQMgrAqmIfQInterruptRegRead (group, &intRegVal);
+
+ /* No bit set : nothing to process (the reaminder of the algorithm is
+ * based on the fact that the interrupt register value contains at
+ * least one bit set
+ */
+ if (intRegVal == 0)
+ {
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.loopRunCnt++;
+#endif
+
+ /* Rebuild the priority table if needed */
+ if (rebuildTable)
+ {
+ ixQMgrDispatcherReBuildPriorityTable ();
+ }
+
+ return;
+ }
+
+ /* Write it back to clear the interrupt */
+ ixQMgrAqmIfQInterruptRegWrite (group, intRegVal);
+
+ /* Read Q status registers after interrupt status read/write */
+ ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsAfterWrite);
+
+ /* get the first queue Id from the interrupt register value */
+ qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal);
+
+ /* check if any change occured during hw register modifications */
+ if (IX_QMGR_QUELOW_GROUP == group)
+ {
+ statusChangeFlag =
+ (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]) ||
+ (qStatusWordsB4Write[1] != qStatusWordsAfterWrite[1]) ||
+ (qStatusWordsB4Write[2] != qStatusWordsAfterWrite[2]) ||
+ (qStatusWordsB4Write[3] != qStatusWordsAfterWrite[3]);
+ }
+ else
+ {
+ statusChangeFlag =
+ (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]);
+ /* Set the queue range based on the queue group to proccess */
+ qIndex += IX_QMGR_MIN_QUEUPP_QID;
+ }
+
+ if (statusChangeFlag == FALSE)
+ {
+ /* check if the interrupt register contains
+ * only 1 bit set (happy day scenario)
+ */
+ currDispatchQInfo = &dispatchQInfo[qIndex];
+ if (intRegVal == currDispatchQInfo->intRegCheckMask)
+ {
+ /* only 1 queue event triggered a notification *
+ * Call the callback function for this queue
+ */
+ currDispatchQInfo->callback (qIndex,
+ currDispatchQInfo->callbackId);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qIndex].callbackCnt++;
+#endif
+ }
+ else
+ {
+ /* the event is triggered by more than 1 queue,
+ * the queue search will be starting from the beginning
+ * or the middle of the priority table
+ *
+ * the serach will end when all the bits of the interrupt
+ * register are cleared. There is no need to maintain
+ * a seperate value and test it at each iteration.
+ */
+ if (IX_QMGR_QUELOW_GROUP == group)
+ {
+ /* check if any bit related to queues in the first
+ * half of the priority table is set
+ */
+ if (intRegVal & lowPriorityTableFirstHalfMask)
+ {
+ priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
+ }
+ else
+ {
+ priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX;
+ }
+ }
+ else
+ {
+ /* check if any bit related to queues in the first
+ * half of the priority table is set
+ */
+ if (intRegVal & uppPriorityTableFirstHalfMask)
+ {
+ priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
+ }
+ else
+ {
+ priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX;
+ }
+ }
+
+ /* iterate following the priority table until all the bits
+ * of the interrupt register are cleared.
+ */
+ do
+ {
+ qIndex = priorityTable[priorityTableIndex++];
+ currDispatchQInfo = &dispatchQInfo[qIndex];
+ intRegCheckMask = currDispatchQInfo->intRegCheckMask;
+
+ /* If this queue caused this interrupt to be raised */
+ if (intRegVal & intRegCheckMask)
+ {
+ /* Call the callback function for this queue */
+ currDispatchQInfo->callback (qIndex,
+ currDispatchQInfo->callbackId);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qIndex].callbackCnt++;
+#endif
+
+ /* Clear the interrupt register bit */
+ intRegVal &= ~intRegCheckMask;
+ }
+ }
+ while(intRegVal);
+ }
+ }
+ else
+ {
+ /* A change in queue status occured during the hw interrupt
+ * register update. To maintain the interrupt consistency, it
+ * is necessary to iterate through all queues of the queue group.
+ */
+
+ /* Read interrupt status again */
+ ixQMgrAqmIfQInterruptRegRead (group, &intRegValAfterWrite);
+
+ if (IX_QMGR_QUELOW_GROUP == group)
+ {
+ priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
+ endIndex = IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX;
+ }
+ else
+ {
+ priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
+ endIndex = IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX;
+ }
+
+ for ( ; priorityTableIndex<=endIndex; priorityTableIndex++)
+ {
+ qIndex = priorityTable[priorityTableIndex];
+ currDispatchQInfo = &dispatchQInfo[qIndex];
+ intRegCheckMask = currDispatchQInfo->intRegCheckMask;
+
+ /* If this queue caused this interrupt to be raised */
+ if (intRegVal & intRegCheckMask)
+ {
+ /* Call the callback function for this queue */
+ currDispatchQInfo->callback (qIndex,
+ currDispatchQInfo->callbackId);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qIndex].callbackCnt++;
+#endif
+
+ } /* if (intRegVal .. */
+
+ /*
+ * If interrupt bit is set in intRegValAfterWrite don't
+ * proceed as this will be caught in next interrupt
+ */
+ else if ((intRegValAfterWrite & intRegCheckMask) == 0)
+ {
+ /* Check if an interrupt was lost for this Q */
+ if (ixQMgrAqmIfQStatusCheck(qStatusWordsB4Write,
+ qStatusWordsAfterWrite,
+ currDispatchQInfo->statusWordOffset,
+ currDispatchQInfo->statusCheckValue,
+ currDispatchQInfo->statusMask))
+ {
+ /* Call the callback function for this queue */
+ currDispatchQInfo->callback (qIndex,
+ dispatchQInfo[qIndex].callbackId);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qIndex].callbackCnt++;
+ dispatcherStats.queueStats[qIndex].intLostCallbackCnt++;
+#endif
+ } /* if ixQMgrAqmIfQStatusCheck(.. */
+ } /* else if ((intRegValAfterWrite ... */
+ } /* for (priorityTableIndex=0 ... */
+ }
+
+ /* Rebuild the priority table if needed */
+ if (rebuildTable)
+ {
+ ixQMgrDispatcherReBuildPriorityTable ();
+ }
+
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.loopRunCnt++;
+#endif
+}
+
+
+
+void
+ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group)
+{
+ UINT32 intRegVal; /* Interrupt reg val */
+ UINT32 intRegCheckMask; /* Mask for checking interrupt bits */
+ IxQMgrQInfo *currDispatchQInfo;
+
+
+ int priorityTableIndex; /* Priority table index */
+ int qIndex; /* Current queue being processed */
+
+#ifndef NDEBUG
+ IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) ||
+ (group == IX_QMGR_QUELOW_GROUP));
+ IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) ||
+ (group == IX_QMGR_QUELOW_GROUP));
+#endif
+
+ /* Read the interrupt register */
+ ixQMgrAqmIfQInterruptRegRead (group, &intRegVal);
+
+
+ /* No queue has interrupt register set */
+ if (intRegVal != 0)
+ {
+
+ /* Write it back to clear the interrupt */
+ ixQMgrAqmIfQInterruptRegWrite (group, intRegVal);
+
+ /* get the first queue Id from the interrupt register value */
+ qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal);
+
+ if (IX_QMGR_QUEUPP_GROUP == group)
+ {
+ /* Set the queue range based on the queue group to proccess */
+ qIndex += IX_QMGR_MIN_QUEUPP_QID;
+ }
+
+ /* check if the interrupt register contains
+ * only 1 bit set
+ * For example:
+ * intRegVal = 0x0010
+ * currDispatchQInfo->intRegCheckMask = 0x0010
+ * intRegVal == currDispatchQInfo->intRegCheckMask is TRUE.
+ */
+ currDispatchQInfo = &dispatchQInfo[qIndex];
+ if (intRegVal == currDispatchQInfo->intRegCheckMask)
+ {
+ /* only 1 queue event triggered a notification *
+ * Call the callback function for this queue
+ */
+ currDispatchQInfo->callback (qIndex,
+ currDispatchQInfo->callbackId);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qIndex].callbackCnt++;
+#endif
+ }
+ else
+ {
+ /* the event is triggered by more than 1 queue,
+ * the queue search will be starting from the beginning
+ * or the middle of the priority table
+ *
+ * the serach will end when all the bits of the interrupt
+ * register are cleared. There is no need to maintain
+ * a seperate value and test it at each iteration.
+ */
+ if (IX_QMGR_QUELOW_GROUP == group)
+ {
+ /* check if any bit related to queues in the first
+ * half of the priority table is set
+ */
+ if (intRegVal & lowPriorityTableFirstHalfMask)
+ {
+ priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
+ }
+ else
+ {
+ priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX;
+ }
+ }
+ else
+ {
+ /* check if any bit related to queues in the first
+ * half of the priority table is set
+ */
+ if (intRegVal & uppPriorityTableFirstHalfMask)
+ {
+ priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
+ }
+ else
+ {
+ priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX;
+ }
+ }
+
+ /* iterate following the priority table until all the bits
+ * of the interrupt register are cleared.
+ */
+ do
+ {
+ qIndex = priorityTable[priorityTableIndex++];
+ currDispatchQInfo = &dispatchQInfo[qIndex];
+ intRegCheckMask = currDispatchQInfo->intRegCheckMask;
+
+ /* If this queue caused this interrupt to be raised */
+ if (intRegVal & intRegCheckMask)
+ {
+ /* Call the callback function for this queue */
+ currDispatchQInfo->callback (qIndex,
+ currDispatchQInfo->callbackId);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qIndex].callbackCnt++;
+#endif
+
+ /* Clear the interrupt register bit */
+ intRegVal &= ~intRegCheckMask;
+ }
+ }
+ while(intRegVal);
+ } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */
+ } /* End of intRegVal != 0 */
+
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.loopRunCnt++;
+#endif
+
+ /* Rebuild the priority table if needed */
+ if (rebuildTable)
+ {
+ ixQMgrDispatcherReBuildPriorityTable ();
+ }
+}
+
+void
+ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group)
+{
+ UINT32 intRegVal =0; /* Interrupt reg val */
+ UINT32 intRegCheckMask; /* Mask for checking interrupt bits */
+ IxQMgrQInfo *currDispatchQInfo;
+
+ int priorityTableIndex; /* Priority table index */
+ int qIndex; /* Current queue being processed */
+
+ UINT32 intRegValCopy = 0;
+ UINT32 intEnableRegVal = 0;
+ UINT8 i = 0;
+
+#ifndef NDEBUG
+ IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) ||
+ (group == IX_QMGR_QUELOW_GROUP));
+#endif
+
+ /* Read the interrupt register */
+ ixQMgrAqmIfQInterruptRegRead (group, &intRegVal);
+
+ /*
+ * mask any interrupts that are not enabled
+ */
+ ixQMgrAqmIfQInterruptEnableRegRead (group, &intEnableRegVal);
+ intRegVal &= intEnableRegVal;
+
+ /* No queue has interrupt register set */
+ if (intRegVal != 0)
+ {
+ if (IX_QMGR_QUELOW_GROUP == group)
+ {
+ /*
+ * As the sticky bit is set, the interrupt register will
+ * not clear if write back at this point because the condition
+ * has not been cleared. Take a copy and write back later after
+ * the condition has been cleared
+ */
+ intRegValCopy = intRegVal;
+ }
+ else
+ {
+ /* no sticky for upper Q's, so write back now */
+ ixQMgrAqmIfQInterruptRegWrite (group, intRegVal);
+ }
+
+ /* get the first queue Id from the interrupt register value */
+ qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal);
+
+ if (IX_QMGR_QUEUPP_GROUP == group)
+ {
+ /* Set the queue range based on the queue group to proccess */
+ qIndex += IX_QMGR_MIN_QUEUPP_QID;
+ }
+
+ /* check if the interrupt register contains
+ * only 1 bit set
+ * For example:
+ * intRegVal = 0x0010
+ * currDispatchQInfo->intRegCheckMask = 0x0010
+ * intRegVal == currDispatchQInfo->intRegCheckMask is TRUE.
+ */
+ currDispatchQInfo = &dispatchQInfo[qIndex];
+ if (intRegVal == currDispatchQInfo->intRegCheckMask)
+ {
+
+ /*
+ * check if Q type periodic - only lower queues can
+ * have there type set to periodic
+ */
+ if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex])
+ {
+ /*
+ * Disable the notifications on any sporadics
+ */
+ for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++)
+ {
+ if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i])
+ {
+ ixQMgrNotificationDisable(i);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[i].disableCount++;
+#endif
+ }
+ }
+ }
+
+ currDispatchQInfo->callback (qIndex,
+ currDispatchQInfo->callbackId);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qIndex].callbackCnt++;
+#endif
+ }
+ else
+ {
+ /* the event is triggered by more than 1 queue,
+ * the queue search will be starting from the beginning
+ * or the middle of the priority table
+ *
+ * the serach will end when all the bits of the interrupt
+ * register are cleared. There is no need to maintain
+ * a seperate value and test it at each iteration.
+ */
+ if (IX_QMGR_QUELOW_GROUP == group)
+ {
+ /* check if any bit related to queues in the first
+ * half of the priority table is set
+ */
+ if (intRegVal & lowPriorityTableFirstHalfMask)
+ {
+ priorityTableIndex =
+ IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
+ }
+ else
+ {
+ priorityTableIndex =
+ IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX;
+ }
+ }
+ else
+ {
+ /* check if any bit related to queues in the first
+ * half of the priority table is set
+ */
+ if (intRegVal & uppPriorityTableFirstHalfMask)
+ {
+ priorityTableIndex =
+ IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
+ }
+ else
+ {
+ priorityTableIndex =
+ IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX;
+ }
+ }
+
+ /* iterate following the priority table until all the bits
+ * of the interrupt register are cleared.
+ */
+ do
+ {
+ qIndex = priorityTable[priorityTableIndex++];
+ currDispatchQInfo = &dispatchQInfo[qIndex];
+ intRegCheckMask = currDispatchQInfo->intRegCheckMask;
+
+ /* If this queue caused this interrupt to be raised */
+ if (intRegVal & intRegCheckMask)
+ {
+ /*
+ * check if Q type periodic - only lower queues can
+ * have there type set to periodic. There can only be one
+ * periodic queue, so the sporadics are only disabled once.
+ */
+ if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex])
+ {
+ /*
+ * Disable the notifications on any sporadics
+ */
+ for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++)
+ {
+ if (IX_QMGR_TYPE_REALTIME_SPORADIC ==
+ ixQMgrQTypes[i])
+ {
+ ixQMgrNotificationDisable(i);
+ /*
+ * remove from intRegVal as we don't want
+ * to service any sporadics now
+ */
+ intRegVal &= ~dispatchQInfo[i].intRegCheckMask;
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[i].disableCount++;
+#endif
+ }
+ }
+ }
+
+ currDispatchQInfo->callback (qIndex,
+ currDispatchQInfo->callbackId);
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.queueStats[qIndex].callbackCnt++;
+#endif
+ /* Clear the interrupt register bit */
+ intRegVal &= ~intRegCheckMask;
+ }
+ }
+ while(intRegVal);
+ } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */
+ } /* End of intRegVal != 0 */
+
+#ifndef NDEBUG
+ /* Update statistics */
+ dispatcherStats.loopRunCnt++;
+#endif
+
+ if ((intRegValCopy != 0) && (IX_QMGR_QUELOW_GROUP == group))
+ {
+ /*
+ * lower groups (therefore sticky) AND at least one enabled interrupt
+ * Write back to clear the interrupt
+ */
+ ixQMgrAqmIfQInterruptRegWrite (IX_QMGR_QUELOW_GROUP, intRegValCopy);
+ }
+
+ /* Rebuild the priority table if needed */
+ if (rebuildTable)
+ {
+ ixQMgrDispatcherReBuildPriorityTable ();
+ }
+}
+
+PRIVATE void
+ixQMgrDispatcherReBuildPriorityTable (void)
+{
+ UINT32 qIndex;
+ UINT32 priority;
+ int lowQuePriorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
+ int uppQuePriorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
+
+ /* Reset the rebuild flag */
+ rebuildTable = FALSE;
+
+ /* initialize the mak used to identify the queues in the first half
+ * of the priority table
+ */
+ lowPriorityTableFirstHalfMask = 0;
+ uppPriorityTableFirstHalfMask = 0;
+
+ /* For each priority level */
+ for(priority=0; priority<IX_QMGR_NUM_PRIORITY_LEVELS; priority++)
+ {
+ /* Foreach low queue in this priority */
+ for(qIndex=0; qIndex<IX_QMGR_MIN_QUEUPP_QID; qIndex++)
+ {
+ if (dispatchQInfo[qIndex].priority == priority)
+ {
+ /* build the priority table bitmask which match the
+ * queues of the first half of the priority table
+ */
+ if (lowQuePriorityTableIndex < IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX)
+ {
+ lowPriorityTableFirstHalfMask |= dispatchQInfo[qIndex].intRegCheckMask;
+ }
+ /* build the priority table */
+ priorityTable[lowQuePriorityTableIndex++] = qIndex;
+ }
+ }
+ /* Foreach upp queue */
+ for(qIndex=IX_QMGR_MIN_QUEUPP_QID; qIndex<=IX_QMGR_MAX_QID; qIndex++)
+ {
+ if (dispatchQInfo[qIndex].priority == priority)
+ {
+ /* build the priority table bitmask which match the
+ * queues of the first half of the priority table
+ */
+ if (uppQuePriorityTableIndex < IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX)
+ {
+ uppPriorityTableFirstHalfMask |= dispatchQInfo[qIndex].intRegCheckMask;
+ }
+ /* build the priority table */
+ priorityTable[uppQuePriorityTableIndex++] = qIndex;
+ }
+ }
+ }
+}
+
+IxQMgrDispatcherStats*
+ixQMgrDispatcherStatsGet (void)
+{
+ return &dispatcherStats;
+}
+
+PRIVATE void
+dummyCallback (IxQMgrQId qId,
+ IxQMgrCallbackId cbId)
+{
+ /* Throttle the trace message */
+ if ((dispatchQInfo[qId].dummyCallbackCount % LOG_THROTTLE_COUNT) == 0)
+ {
+ IX_QMGR_LOG_WARNING2("--> dummyCallback: qId (%d), callbackId (%d)\n",qId,cbId);
+ }
+ dispatchQInfo[qId].dummyCallbackCount++;
+
+#ifndef NDEBUG
+ /* Update statistcs */
+ dispatcherStats.queueStats[qId].intNoCallbackCnt++;
+#endif
+}
+void
+ixQMgrLLPShow (int resetStats)
+{
+#ifndef NDEBUG
+ UINT8 i = 0;
+ IxQMgrQInfo *q;
+ UINT32 intEnableRegVal = 0;
+
+ printf ("Livelock statistics are printed on the fly.\n");
+ printf ("qId Type EnableCnt DisableCnt IntEnableState Callbacks\n");
+ printf ("=== ======== ========= ========== ============== =========\n");
+
+ for (i=0; i<= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++)
+ {
+ q = &dispatchQInfo[i];
+
+ if (ixQMgrQTypes[i] != IX_QMGR_TYPE_REALTIME_OTHER)
+ {
+ printf (" %2d ", i);
+
+ if (ixQMgrQTypes[i] == IX_QMGR_TYPE_REALTIME_SPORADIC)
+ {
+ printf ("Sporadic");
+ }
+ else
+ {
+ printf ("Periodic");
+ }
+
+
+ ixQMgrAqmIfQInterruptEnableRegRead (IX_QMGR_QUELOW_GROUP,
+ &intEnableRegVal);
+
+
+ intEnableRegVal &= dispatchQInfo[i].intRegCheckMask;
+ intEnableRegVal = intEnableRegVal >> i;
+
+ printf (" %10d %10d %10d %10d\n",
+ dispatcherStats.queueStats[i].enableCount,
+ dispatcherStats.queueStats[i].disableCount,
+ intEnableRegVal,
+ dispatcherStats.queueStats[i].callbackCnt);
+
+ if (resetStats)
+ {
+ dispatcherStats.queueStats[i].enableCount =
+ dispatcherStats.queueStats[i].disableCount =
+ dispatcherStats.queueStats[i].callbackCnt = 0;
+ }
+ }
+ }
+#else
+ IX_QMGR_LOG0("Livelock Prevention statistics are only collected in debug mode\n");
+#endif
+}
+
+void
+ixQMgrPeriodicDone (void)
+{
+ UINT32 i = 0;
+ UINT32 ixQMgrLockKey = 0;
+
+ /*
+ * for the lower queues
+ */
+ for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++)
+ {
+ /*
+ * check for sporadics
+ */
+ if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i])
+ {
+ /*
+ * enable any sporadics
+ */
+ ixQMgrLockKey = ixOsalIrqLock();
+ ixQMgrAqmIfQInterruptEnable(i);
+ ixOsalIrqUnlock(ixQMgrLockKey);
+#ifndef NDEBUG
+ /*
+ * Update statistics
+ */
+ dispatcherStats.queueStats[i].enableCount++;
+ dispatcherStats.queueStats[i].notificationEnabled = TRUE;
+#endif
+ }
+ }
+}
+IX_STATUS
+ixQMgrCallbackTypeSet (IxQMgrQId qId,
+ IxQMgrType type)
+{
+ UINT32 ixQMgrLockKey = 0;
+ IxQMgrType ixQMgrOldType =0;
+
+#ifndef NDEBUG
+ if (!ixQMgrQIsConfigured(qId))
+ {
+ return IX_QMGR_Q_NOT_CONFIGURED;
+ }
+ if (qId >= IX_QMGR_MIN_QUEUPP_QID)
+ {
+ return IX_QMGR_PARAMETER_ERROR;
+ }
+ if(!IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type))
+ {
+ return IX_QMGR_PARAMETER_ERROR;
+ }
+#endif
+
+ ixQMgrOldType = ixQMgrQTypes[qId];
+ ixQMgrQTypes[qId] = type;
+
+ /*
+ * check if Q has been changed from type SPORADIC
+ */
+ if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrOldType)
+ {
+ /*
+ * previously Q was a SPORADIC, this means that LLP
+ * might have had it disabled. enable it now.
+ */
+ ixQMgrLockKey = ixOsalIrqLock();
+ ixQMgrAqmIfQInterruptEnable(qId);
+ ixOsalIrqUnlock(ixQMgrLockKey);
+
+#ifndef NDEBUG
+ /*
+ * Update statistics
+ */
+ dispatcherStats.queueStats[qId].enableCount++;
+#endif
+ }
+
+ return IX_SUCCESS;
+}
+
+IX_STATUS
+ixQMgrCallbackTypeGet (IxQMgrQId qId,
+ IxQMgrType *type)
+{
+#ifndef NDEBUG
+ if (!ixQMgrQIsConfigured(qId))
+ {
+ return IX_QMGR_Q_NOT_CONFIGURED;
+ }
+ if (qId >= IX_QMGR_MIN_QUEUPP_QID)
+ {
+ return IX_QMGR_PARAMETER_ERROR;
+ }
+ if(type == NULL)
+ {
+ return IX_QMGR_PARAMETER_ERROR;
+ }
+#endif
+
+ *type = ixQMgrQTypes[qId];
+ return IX_SUCCESS;
+}