diff options
Diffstat (limited to 'u-boot/board/RPXClassic/RPXClassic.c')
| -rw-r--r-- | u-boot/board/RPXClassic/RPXClassic.c | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/u-boot/board/RPXClassic/RPXClassic.c b/u-boot/board/RPXClassic/RPXClassic.c new file mode 100644 index 0000000..c3d5385 --- /dev/null +++ b/u-boot/board/RPXClassic/RPXClassic.c @@ -0,0 +1,276 @@ +/* + * (C) Copyright 2001 + * Stäubli Faverges - <www.staubli.com> + * Pierre AUBERT p.aubert@staubli.com + * U-Boot port on RPXClassic LF (CLLF_BW31) board + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <i2c.h> +#include <config.h> +#include <mpc8xx.h> +#include <net.h> + +/* ------------------------------------------------------------------------- */ + +static long int dram_size (long int, long int *, long int); +static unsigned char aschex_to_byte (unsigned char *cp); + +/* ------------------------------------------------------------------------- */ + +#define _NOT_USED_ 0xFFFFCC25 + +const uint sdram_table[] = +{ + /* + * Single Read. (Offset 00h in UPMA RAM) + */ + 0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08, + 0x3FBFCC27, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Burst Read. (Offset 08h in UPMA RAM) + */ + 0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88, + 0x3FBFCC27, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Single Write. (Offset 18h in UPMA RAM) + */ + 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00, + 0x3FFFCC27, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Burst Write. (Offset 20h in UPMA RAM) + */ + 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C, + 0x0CFFCC00, 0x33FFCC27, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, + + /* + * Refresh. (Offset 30h in UPMA RAM) + */ + 0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24, + 0x3FFFCC27, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Exception. (Offset 3Ch in UPMA RAM) + */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_ +}; + +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + puts ("Board: RPXClassic\n"); + return (0); +} + +/*----------------------------------------------------------------------------- + * board_get_enetaddr -- Read the MAC Address in the I2C EEPROM + *----------------------------------------------------------------------------- + */ +static void board_get_enetaddr(uchar *enet) +{ + int i; + char buff[256], *cp; + + /* Initialize I2C */ + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + /* Read 256 bytes in EEPROM */ + i2c_read (0x54, 0, 1, (uchar *)buff, 128); + i2c_read (0x54, 128, 1, (uchar *)buff + 128, 128); + + /* Retrieve MAC address in buffer (key EA) */ + for (cp = buff;;) { + if (cp[0] == 'E' && cp[1] == 'A') { + cp += 3; + /* Read MAC address */ + for (i = 0; i < 6; i++, cp += 2) { + enet[i] = aschex_to_byte ((unsigned char *)cp); + } + } + /* Scan to the end of the record */ + while ((*cp != '\n') && (*cp != (char)0xff)) { + cp++; + } + /* If the next character is a \n, 0 or ff, we are done. */ + cp++; + if ((*cp == '\n') || (*cp == 0) || (*cp == (char)0xff)) + break; + } + +#ifdef CONFIG_FEC_ENET + /* The MAC address is the same as normal ethernet except the 3rd byte */ + /* (See the E.P. Planet Core Overview manual */ + enet[3] |= 0x80; +#endif + + printf("MAC address = %pM\n", enet); +} + +int misc_init_r(void) +{ + uchar enetaddr[6]; + + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { + board_get_enetaddr(enetaddr); + eth_setenv_enetaddr("ethaddr", enetaddr); + } + + return 0; +} + +void rpxclassic_init (void) +{ + /* Enable NVRAM */ + *((uchar *) BCSR0) |= BCSR0_ENNVRAM; + +#ifdef CONFIG_FEC_ENET + + /* Validate the fast ethernet tranceiver */ + *((volatile uchar *) BCSR2) &= ~BCSR2_MIICTL; + *((volatile uchar *) BCSR2) &= ~BCSR2_MIIPWRDWN; + *((volatile uchar *) BCSR2) |= BCSR2_MIIRST; + *((volatile uchar *) BCSR2) |= BCSR2_MIIPWRDWN; +#endif + +} + +/* ------------------------------------------------------------------------- */ + +phys_size_t initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size10; + + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + /* Refresh clock prescalar */ + memctl->memc_mptpr = CONFIG_SYS_MPTPR; + + memctl->memc_mar = 0x00000000; + + /* Map controller banks 1 to the SDRAM bank */ + memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; + memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; + + memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */ + + udelay (200); + + /* perform SDRAM initializsation sequence */ + + memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - refresh twice */ + udelay (1); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + + udelay (1000); + + /* Check Bank 0 Memory Size + * try 10 column mode + */ + + size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM, + SDRAM_MAX_SIZE); + + return (size10); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + +static long int dram_size (long int mamr_value, long int *base, long int maxsize) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + memctl->memc_mamr = mamr_value; + + return (get_ram_size(base, maxsize)); +} +/*----------------------------------------------------------------------------- + * aschex_to_byte -- + *----------------------------------------------------------------------------- + */ +static unsigned char aschex_to_byte (unsigned char *cp) +{ + u_char byte, c; + + c = *cp++; + + if ((c >= 'A') && (c <= 'F')) { + c -= 'A'; + c += 10; + } else if ((c >= 'a') && (c <= 'f')) { + c -= 'a'; + c += 10; + } else { + c -= '0'; + } + + byte = c * 16; + + c = *cp; + + if ((c >= 'A') && (c <= 'F')) { + c -= 'A'; + c += 10; + } else if ((c >= 'a') && (c <= 'f')) { + c -= 'a'; + c += 10; + } else { + c -= '0'; + } + + byte += c; + + return (byte); +} |