diff options
Diffstat (limited to 'u-boot/board/amcc/walnut')
| -rw-r--r-- | u-boot/board/amcc/walnut/Makefile | 50 | ||||
| -rw-r--r-- | u-boot/board/amcc/walnut/flash.c | 199 | ||||
| -rw-r--r-- | u-boot/board/amcc/walnut/walnut.c | 95 |
3 files changed, 344 insertions, 0 deletions
diff --git a/u-boot/board/amcc/walnut/Makefile b/u-boot/board/amcc/walnut/Makefile new file mode 100644 index 0000000..9f63df1 --- /dev/null +++ b/u-boot/board/amcc/walnut/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS = $(BOARD).o flash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/u-boot/board/amcc/walnut/flash.c b/u-boot/board/amcc/walnut/flash.c new file mode 100644 index 0000000..f72e278 --- /dev/null +++ b/u-boot/board/amcc/walnut/flash.c @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Modified 4/5/2001 + * Wait for completion of each sector erase command issued + * 4/5/2001 + * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com + */ + +#include <common.h> +#include <asm/ppc4xx.h> +#include <asm/processor.h> + +#undef DEBUG +#ifdef DEBUG +#define DEBUGF(x...) printf(x) +#else +#define DEBUGF(x...) +#endif /* DEBUG */ + +/* + * include common flash code (for amcc boards) + */ +#include "../common/flash.c" + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size(vu_long * addr, flash_info_t * info); +static void flash_get_offsets(ulong base, flash_info_t * info); + +unsigned long flash_init(void) +{ + unsigned long size_b0, size_b1; + int i; + uint pbcr; + unsigned long base_b0, base_b1; + + /* Init: no FLASHes known */ + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + /* Static FLASH Bank configuration here - FIXME XXX */ + + size_b0 = + flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); + + if (flash_info[0].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size_b0, size_b0 << 20); + } + + /* Only one bank */ + if (CONFIG_SYS_MAX_FLASH_BANKS == 1) { + /* Setup offsets */ + flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]); + + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, + &flash_info[0]); +#ifdef CONFIG_ENV_IS_IN_FLASH + (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, + CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, + &flash_info[0]); + (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, + CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, + &flash_info[0]); +#endif + + size_b1 = 0; + flash_info[0].size = size_b0; + } else { + /* 2 banks */ + size_b1 = + flash_get_size((vu_long *) FLASH_BASE1_PRELIM, + &flash_info[1]); + + /* Re-do sizing to get full correct info */ + + if (size_b1) { + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); + base_b1 = -size_b1; + pbcr = + (pbcr & 0x0001ffff) | base_b1 | + (((size_b1 / 1024 / 1024) - 1) << 17); + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ + } + + if (size_b0) { + mtdcr(EBC0_CFGADDR, PB1CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB1CR); + base_b0 = base_b1 - size_b0; + pbcr = + (pbcr & 0x0001ffff) | base_b0 | + (((size_b0 / 1024 / 1024) - 1) << 17); + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB0CR = %x\n", pbcr); */ + } + + size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]); + + flash_get_offsets(base_b0, &flash_info[0]); + + /* monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + base_b0 + size_b0 - monitor_flash_len, + base_b0 + size_b0 - 1, &flash_info[0]); + + if (size_b1) { + /* Re-do sizing to get full correct info */ + size_b1 = + flash_get_size((vu_long *) base_b1, &flash_info[1]); + + flash_get_offsets(base_b1, &flash_info[1]); + + /* monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + base_b1 + size_b1 - + monitor_flash_len, + base_b1 + size_b1 - 1, + &flash_info[1]); + /* monitor protection OFF by default (one is enough) */ + (void)flash_protect(FLAG_PROTECT_CLEAR, + base_b0 + size_b0 - + monitor_flash_len, + base_b0 + size_b0 - 1, + &flash_info[0]); + } else { + flash_info[1].flash_id = FLASH_UNKNOWN; + flash_info[1].sector_count = -1; + } + + flash_info[0].size = size_b0; + flash_info[1].size = size_b1; + } /* else 2 banks */ + return (size_b0 + size_b1); +} + + +static void flash_get_offsets(ulong base, flash_info_t * info) +{ + int i; + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + (info->flash_id == FLASH_AM040)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } +} diff --git a/u-boot/board/amcc/walnut/walnut.c b/u-boot/board/amcc/walnut/walnut.c new file mode 100644 index 0000000..4f29932 --- /dev/null +++ b/u-boot/board/amcc/walnut/walnut.c @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <spd_sdram.h> + +int board_early_init_f(void) +{ + /*-------------------------------------------------------------------------+ + | Interrupt controller setup for the Walnut/Sycamore board. + | Note: IRQ 0-15 405GP internally generated; active high; level sensitive + | IRQ 16 405GP internally generated; active low; level sensitive + | IRQ 17-24 RESERVED + | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive + | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive + | IRQ 27 (EXT IRQ 2) Not Used + | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive + | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive + | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive + | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive + | Note for Walnut board: + | An interrupt taken for the FPGA (IRQ 25) indicates that either + | the Mouse, Keyboard, IRDA, or External Expansion caused the + | interrupt. The FPGA must be read to determine which device + | caused the interrupt. The default setting of the FPGA clears + | + +-------------------------------------------------------------------------*/ + + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */ + mtdcr(UIC0PR, 0xFFFFFFE0); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + + /* set UART1 control to select CTS/RTS */ +#define FPGA_BRDC 0xF0300004 + *(volatile char *)(FPGA_BRDC) |= 0x1; + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + uint pvr = get_pvr(); + + if (pvr == PVR_405GPR_RB) { + puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board"); + } else { + puts("Board: Walnut - AMCC PPC405GP Evaluation Board"); + } + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} + +/* + * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of + * the necessary info for SDRAM controller configuration + */ +phys_size_t initdram(int board_type) +{ + return spd_sdram(); +} |