diff options
Diffstat (limited to 'u-boot/board/davinci/dm355evm/dm355evm.c')
| -rw-r--r-- | u-boot/board/davinci/dm355evm/dm355evm.c | 157 |
1 files changed, 157 insertions, 0 deletions
diff --git a/u-boot/board/davinci/dm355evm/dm355evm.c b/u-boot/board/davinci/dm355evm/dm355evm.c new file mode 100644 index 0000000..112851a --- /dev/null +++ b/u-boot/board/davinci/dm355evm/dm355evm.c @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <nand.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/emif_defs.h> +#include <asm/arch/nand_defs.h> +#include <asm/arch/davinci_misc.h> +#include <net.h> +#include <netdev.h> +#ifdef CONFIG_DAVINCI_MMC +#include <mmc.h> +#include <asm/arch/sdmmc_defs.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * With the DM355 EVM, u-boot is *always* a third stage loader, + * unless a JTAG debugger handles the first two stages: + * + * - 1st stage is ROM Boot Loader (RBL), which searches for a + * second stage loader in one of three places based on SW7: + * NAND (with MMC/SD fallback), MMC/SD, or UART. + * + * - 2nd stage is User Boot Loader (UBL), using at most 30KB + * of on-chip SRAM, responsible for lowlevel init, and for + * loading the third stage loader into DRAM. + * + * - 3rd stage, that's us! + */ + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM355_EVM; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + /* We expect the UBL to have handled "lowlevel init", which + * involves setting up at least: + * - clocks + * + PLL1 (for ARM and peripherals) and PLL2 (for DDR) + * + clock divisors for those PLLs + * + LPSC_DDR module enabled + * + LPSC_TIMER0 module (still) enabled + * - EMIF + * + DDR init and timings + * + AEMIF timings (for NAND and DM9000) + * - pinmux + * + * Some of that is repeated here, mostly as a precaution. + */ + + /* AEMIF: Some "address" lines are available as GPIOs. A3..A13 + * could be too if we used A12 as a GPIO during NAND chipselect + * (and Linux did too), letting us control the LED on A7/GPIO61. + */ + REG(PINMUX2) = 0x0c08; + + /* UART0 may still be in SyncReset if we didn't boot from UART */ + davinci_enable_uart0(); + + /* EDMA may be in SyncReset too; turn it on, Linux won't (yet) */ + lpsc_on(DAVINCI_LPSC_TPCC); + lpsc_on(DAVINCI_LPSC_TPTC0); + lpsc_on(DAVINCI_LPSC_TPTC1); + + return 0; +} + +#ifdef CONFIG_DRIVER_DM9000 +int board_eth_init(bd_t *bis) +{ + return dm9000_initialize(bis); +} +#endif + +#ifdef CONFIG_NAND_DAVINCI + +static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *this = mtd->priv; + unsigned long wbase = (unsigned long) this->IO_ADDR_W; + unsigned long rbase = (unsigned long) this->IO_ADDR_R; + + if (chip == 1) { + __set_bit(14, &wbase); + __set_bit(14, &rbase); + } else { + __clear_bit(14, &wbase); + __clear_bit(14, &rbase); + } + this->IO_ADDR_W = (void *)wbase; + this->IO_ADDR_R = (void *)rbase; +} + +int board_nand_init(struct nand_chip *nand) +{ + davinci_nand_init(nand); + nand->select_chip = nand_dm355evm_select_chip; + return 0; +} + +#endif + +#ifdef CONFIG_DAVINCI_MMC +static struct davinci_mmc mmc_sd0 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, + .input_clk = 108000000, + .host_caps = MMC_MODE_4BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_1, +}; + +#ifdef CONFIG_DAVINCI_MMC_SD1 +static struct davinci_mmc mmc_sd1 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, + .input_clk = 108000000, + .host_caps = MMC_MODE_4BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_1, +}; +#endif + +int board_mmc_init(bd_t *bis) +{ + int err; + + /* Add slot-0 to mmc subsystem */ + err = davinci_mmc_init(bis, &mmc_sd0); + if (err) + return err; + +#ifdef CONFIG_DAVINCI_MMC_SD1 + /* Add slot-1 to mmc subsystem */ + err = davinci_mmc_init(bis, &mmc_sd1); +#endif + + return err; +} +#endif |