diff options
Diffstat (limited to 'u-boot/board/ep88x/ep88x.c')
| -rw-r--r-- | u-boot/board/ep88x/ep88x.c | 133 |
1 files changed, 133 insertions, 0 deletions
diff --git a/u-boot/board/ep88x/ep88x.c b/u-boot/board/ep88x/ep88x.c new file mode 100644 index 0000000..7e95007 --- /dev/null +++ b/u-boot/board/ep88x/ep88x.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2005 Arabella Software Ltd. + * Yuli Barcohen <yuli@arabellasw.com> + * + * Support for Embedded Planet EP88x boards. + * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc8xx.h> + +/* + * SDRAM uses two Micron chips. + * Minimal CPU frequency is 40MHz. + */ +static uint sdram_table[] = { + /* Single read (offset 0x00 in UPM RAM) */ + 0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x01B98404, + 0x1FF74C00, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, + + /* Burst read (offset 0x08 in UPM RAM) */ + 0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x00BDC404, + 0x00FFCC00, 0x00FFCC00, 0x01FB8C00, 0x1FF74C00, + 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, + 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, + + /* Single write (offset 0x18 in UPM RAM) */ + 0xEFCBCC04, 0x0F37C804, 0x0EEE8002, 0x01B90404, + 0x1FF74C05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, + + /* Burst write (offset 0x20 in UPM RAM) */ + 0xEFCBCC04, 0x0F37C804, 0x0EEE8000, 0x00BD4400, + 0x00FFCC00, 0x00FFCC02, 0x01FB8C04, 0x1FF74C05, + 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, + 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, + + /* Refresh (offset 0x30 in UPM RAM) */ + 0xEFFACC04, 0x0FF5CC04, 0x0FFFCC04, 0x1FFFCC04, + 0xFFFFCC05, 0xFFFFCC05, 0xEFFB8C34, 0x0FF74C34, + 0x0FFACCB4, 0x0FF5CC34, 0x0FFFC034, 0x0FFFC0B4, + + /* Exception (offset 0x3C in UPM RAM) */ + 0x0FEA8034, 0x1FB54034, 0xFFFFCC34, 0xFFFFCC05 +}; + +int board_early_init_f (void) +{ + vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR; + + bcsr[0] |= 0x0C; /* Turn the LEDs off */ + bcsr[2] |= 0x08; /* Enable flash WE# line - necessary for + flash detection by CFI driver + */ + +#if defined(CONFIG_8xx_CONS_SMC1) + bcsr[6] |= 0x10; /* Enables RS-232 transceiver */ +#endif +#if defined(CONFIG_8xx_CONS_SCC2) + bcsr[7] |= 0x10; /* Enables RS-232 transceiver */ +#endif +#ifdef CONFIG_ETHER_ON_FEC1 + bcsr[8] |= 0xC0; /* Enable Ethernet 1 PHY */ +#endif +#ifdef CONFIG_ETHER_ON_FEC2 + bcsr[8] |= 0x30; /* Enable Ethernet 2 PHY */ +#endif + + return 0; +} + +phys_size_t initdram (int board_type) +{ + long int msize; + volatile immap_t *immap = (volatile immap_t *)CONFIG_SYS_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint)); + + /* Configure SDRAM refresh */ + memctl->memc_mptpr = MPTPR_PTP_DIV2; /* BRGCLK/2 */ + + memctl->memc_mamr = (65 << 24) | CONFIG_SYS_MAMR; /* No refresh */ + udelay(100); + + /* Run MRS pattern from location 0x36 */ + memctl->memc_mar = 0x88; + memctl->memc_mcr = 0x80002236; + udelay(100); + + memctl->memc_mamr |= MAMR_PTAE; /* Enable refresh */ + memctl->memc_or1 = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM; + memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V; + + msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE); + memctl->memc_or1 |= ~(msize - 1); + + return msize; +} + +int checkboard( void ) +{ + vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR; + + puts("Board: "); + switch (bcsr[15]) { + case 0xE7: + puts("EP88xC 1.0"); + break; + default: + printf("unknown ID=%02X", bcsr[15]); + } + printf(" CPLD revision %d\n", bcsr[14]); + + return 0; +} |