diff options
Diffstat (limited to 'u-boot/board/esd/vme8349/vme8349.c')
| -rw-r--r-- | u-boot/board/esd/vme8349/vme8349.c | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/u-boot/board/esd/vme8349/vme8349.c b/u-boot/board/esd/vme8349/vme8349.c new file mode 100644 index 0000000..96698e7 --- /dev/null +++ b/u-boot/board/esd/vme8349/vme8349.c @@ -0,0 +1,221 @@ +/* + * vme8349.c -- esd VME8349 board support + * + * Copyright (c) 2008-2009 esd gmbh. + * + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Reinhard Arlt <reinhard.arlt@esd-electronics.com> + * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <asm/mpc8349_pci.h> +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif +#include <asm/io.h> +#include <asm/mmu.h> +#include <spd.h> +#include <spd_sdram.h> +#include <i2c.h> +#include <netdev.h> + +void ddr_enable_ecc(unsigned int dram_size); + +phys_size_t initdram(int board_type) +{ + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main memory */ + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + + msize = spd_sdram(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + + /* Now check memory size (after ECC is initialized) */ + msize = get_ram_size(0, msize); + + /* return total bus SDRAM size(bytes) -- DDR */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ +#ifdef VME_CADDY2 + puts("Board: esd VME-CADDY/2\n"); +#else + puts("Board: esd VME-CPU/8349\n"); +#endif + + return 0; +} + +#ifdef VME_CADDY2 +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif + +int misc_init_r() +{ + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + + clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0); + + return 0; +} + +/* + * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2 + * and VME-CADDY/2) have different SDRAM configurations. + */ +#ifdef VME_CADDY2 +#define SMALL_RAM 0xff +#define LARGE_RAM 0x00 +#else +#define SMALL_RAM 0x00 +#define LARGE_RAM 0xff +#endif + +#define SPD_VAL(a, b) (((a) & SMALL_RAM) | ((b) & LARGE_RAM)) + +static spd_eeprom_t default_spd_eeprom = { + SPD_VAL(0x80, 0x80), /* 00 use 128 Bytes */ + SPD_VAL(0x07, 0x07), /* 01 use 128 Bytes */ + SPD_MEMTYPE_DDR2, /* 02 type is DDR2 */ + SPD_VAL(0x0d, 0x0d), /* 03 rows: 13 */ + SPD_VAL(0x09, 0x0a), /* 04 cols: 9 / 10 */ + SPD_VAL(0x00, 0x00), /* 05 */ + SPD_VAL(0x40, 0x40), /* 06 */ + SPD_VAL(0x00, 0x00), /* 07 */ + SPD_VAL(0x05, 0x05), /* 08 */ + SPD_VAL(0x30, 0x30), /* 09 */ + SPD_VAL(0x45, 0x45), /* 10 */ + SPD_VAL(0x02, 0x02), /* 11 ecc used */ + SPD_VAL(0x82, 0x82), /* 12 */ + SPD_VAL(0x10, 0x10), /* 13 */ + SPD_VAL(0x08, 0x08), /* 14 */ + SPD_VAL(0x00, 0x00), /* 15 */ + SPD_VAL(0x0c, 0x0c), /* 16 */ + SPD_VAL(0x04, 0x08), /* 17 banks: 4 / 8 */ + SPD_VAL(0x38, 0x38), /* 18 */ + SPD_VAL(0x00, 0x00), /* 19 */ + SPD_VAL(0x02, 0x02), /* 20 */ + SPD_VAL(0x00, 0x00), /* 21 */ + SPD_VAL(0x03, 0x03), /* 22 */ + SPD_VAL(0x3d, 0x3d), /* 23 */ + SPD_VAL(0x45, 0x45), /* 24 */ + SPD_VAL(0x50, 0x50), /* 25 */ + SPD_VAL(0x45, 0x45), /* 26 */ + SPD_VAL(0x3c, 0x3c), /* 27 */ + SPD_VAL(0x28, 0x28), /* 28 */ + SPD_VAL(0x3c, 0x3c), /* 29 */ + SPD_VAL(0x2d, 0x2d), /* 30 */ + SPD_VAL(0x20, 0x80), /* 31 */ + SPD_VAL(0x20, 0x20), /* 32 */ + SPD_VAL(0x27, 0x27), /* 33 */ + SPD_VAL(0x10, 0x10), /* 34 */ + SPD_VAL(0x17, 0x17), /* 35 */ + SPD_VAL(0x3c, 0x3c), /* 36 */ + SPD_VAL(0x1e, 0x1e), /* 37 */ + SPD_VAL(0x1e, 0x1e), /* 38 */ + SPD_VAL(0x00, 0x00), /* 39 */ + SPD_VAL(0x00, 0x06), /* 40 */ + SPD_VAL(0x37, 0x37), /* 41 */ + SPD_VAL(0x4b, 0x7f), /* 42 */ + SPD_VAL(0x80, 0x80), /* 43 */ + SPD_VAL(0x18, 0x18), /* 44 */ + SPD_VAL(0x22, 0x22), /* 45 */ + SPD_VAL(0x00, 0x00), /* 46 */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, + SPD_VAL(0x10, 0x10), /* 62 */ + SPD_VAL(0x7e, 0x1d), /* 63 */ + { 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' }, + SPD_VAL(0x00, 0x00), /* 72 */ +#ifdef VME_CADDY2 + { "vme-caddy/2 ram " } +#else + { "vme-cpu/2 ram " } +#endif +}; + +int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len) +{ + int old_bus = I2C_GET_BUS(); + unsigned int l, sum; + int valid = 0; + + I2C_SET_BUS(0); + + if (i2c_read(chip, addr, alen, buffer, len) == 0) + if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) { + sum = 0; + for (l = 0; l < 63; l++) + sum = (sum + buffer[l]) & 0xff; + if (sum == buffer[63]) + valid = 1; + else + printf("Invalid checksum in EEPROM %02x %02x\n", + sum, buffer[63]); + } + + if (valid == 0) { + memcpy(buffer, (void *)&default_spd_eeprom, len); + sum = 0; + for (l = 0; l < 63; l++) + sum = (sum + buffer[l]) & 0xff; + if (sum != buffer[63]) + printf("Invalid checksum in FLASH %02x %02x\n", + sum, buffer[63]); + buffer[63] = sum; + } + + I2C_SET_BUS(old_bus); + + return 0; +} |