summaryrefslogtreecommitdiffstats
path: root/u-boot/board/esd/voh405/voh405.c
diff options
context:
space:
mode:
Diffstat (limited to 'u-boot/board/esd/voh405/voh405.c')
-rw-r--r--u-boot/board/esd/voh405/voh405.c393
1 files changed, 393 insertions, 0 deletions
diff --git a/u-boot/board/esd/voh405/voh405.c b/u-boot/board/esd/voh405/voh405.c
new file mode 100644
index 0000000..5f28a48
--- /dev/null
+++ b/u-boot/board/esd/voh405/voh405.c
@@ -0,0 +1,393 @@
+/*
+ * (C) Copyright 2001-2004
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+extern void lxt971_no_sleep(void);
+
+/* fpga configuration data - gzip compressed and generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* logo bitmap data - gzip compressed and generated by bin2c */
+unsigned char logo_bmp_320[] =
+{
+#include "logo_320_240_4bpp.c"
+};
+
+unsigned char logo_bmp_640[] =
+{
+#include "logo_640_480_24bpp.c"
+};
+
+
+/*
+ * include common lcd code (for esd boards)
+ */
+#include "../common/lcd.c"
+
+#include "../common/s1d13704_320_240_4bpp.h"
+#include "../common/s1d13806_320_240_4bpp.h"
+#include "../common/s1d13806_640_480_16bpp.h"
+
+
+int board_early_init_f (void)
+{
+ /*
+ * IRQ 0-15 405GP internally generated; active high; level sensitive
+ * IRQ 16 405GP internally generated; active low; level sensitive
+ * IRQ 17-24 RESERVED
+ * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+ */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFFB5); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+
+ /*
+ * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+ */
+ mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
+
+ return 0;
+}
+
+int misc_init_r (void)
+{
+ unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+ unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+ unsigned short *lcd_contrast =
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
+ unsigned short *lcd_backlight =
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
+ unsigned char *dst;
+ ulong len = sizeof(fpgadata);
+ int status;
+ int index;
+ int i;
+ char *str;
+
+ dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+ if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+ printf ("GUNZIP ERROR - must RESET board to recover\n");
+ do_reset (NULL, 0, 0, NULL);
+ }
+
+ status = fpga_boot(dst, len);
+ if (status != 0) {
+ printf("\nFPGA: Booting failed ");
+ switch (status) {
+ case ERROR_FPGA_PRG_INIT_LOW:
+ printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_INIT_HIGH:
+ printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_DONE:
+ printf("(Timeout: DONE not high after programming FPGA)\n ");
+ break;
+ }
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i=0; i<4; i++) {
+ len = dst[index];
+ printf("FPGA: %s\n", &(dst[index+1]));
+ index += len+3;
+ }
+ putc ('\n');
+ /* delayed reboot */
+ for (i=20; i>0; i--) {
+ printf("Rebooting in %2d seconds \r",i);
+ for (index=0;index<1000;index++)
+ udelay(1000);
+ }
+ putc ('\n');
+ do_reset(NULL, 0, 0, NULL);
+ }
+
+ puts("FPGA: ");
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i=0; i<4; i++) {
+ len = dst[index];
+ printf("%s ", &(dst[index+1]));
+ index += len+3;
+ }
+ putc ('\n');
+
+ free(dst);
+
+ /*
+ * Reset FPGA via FPGA_INIT pin
+ */
+ out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~FPGA_INIT); /* reset low */
+ udelay(1000); /* wait 1ms */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | FPGA_INIT); /* reset high */
+ udelay(1000); /* wait 1ms */
+
+ /*
+ * Reset external DUARTs
+ */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
+ udelay(10); /* wait 10us */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
+ udelay(1000); /* wait 1ms */
+
+ /*
+ * Set NAND-FLASH GPIO signals to default
+ */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
+
+ /*
+ * Setup EEPROM write protection
+ */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+ out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
+
+ /*
+ * Enable interrupts in exar duart mcr[3]
+ */
+ out_8(duart0_mcr, 0x08);
+ out_8(duart1_mcr, 0x08);
+
+ /*
+ * Init lcd interface and display logo
+ */
+ str = getenv("bd_type");
+ if (strcmp(str, "voh405_bw") == 0) {
+ lcd_setup(0, 1);
+ lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
+ regs_13704_320_240_4bpp,
+ sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
+ logo_bmp_320, sizeof(logo_bmp_320));
+ } else if (strcmp(str, "voh405_bwbw") == 0) {
+ lcd_setup(0, 1);
+ lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
+ regs_13704_320_240_4bpp,
+ sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
+ logo_bmp_320, sizeof(logo_bmp_320));
+ lcd_setup(1, 1);
+ lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
+ regs_13806_320_240_4bpp,
+ sizeof(regs_13806_320_240_4bpp)/sizeof(regs_13806_320_240_4bpp[0]),
+ logo_bmp_320, sizeof(logo_bmp_320));
+ } else if (strcmp(str, "voh405_bwc") == 0) {
+ lcd_setup(0, 1);
+ lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
+ regs_13704_320_240_4bpp,
+ sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
+ logo_bmp_320, sizeof(logo_bmp_320));
+ lcd_setup(1, 0);
+ lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
+ regs_13806_640_480_16bpp,
+ sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
+ logo_bmp_640, sizeof(logo_bmp_640));
+ } else {
+ printf("Unsupported bd_type defined (%s) -> No display configured!\n", str);
+ return 0;
+ }
+
+ /*
+ * Set invert bit in small lcd controller
+ */
+ out_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2),
+ in_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2)) | 0x01);
+
+ /*
+ * Set default contrast voltage on epson vga controller
+ */
+ out_be16(lcd_contrast, 0x4646);
+
+ /*
+ * Enable backlight
+ */
+ out_be16(lcd_backlight, 0xffff);
+
+ /*
+ * Enable external I2C bus
+ */
+ out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_IIC_ON);
+
+ return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ char str[64];
+ int i = getenv_f("serial#", str, sizeof(str));
+
+ puts ("Board: ");
+
+ if (i == -1) {
+ puts ("### No HW ID - assuming VOH405");
+ } else {
+ puts(str);
+ }
+
+ if (getenv_f("bd_type", str, sizeof(str)) != -1) {
+ printf(" (%s)", str);
+ } else {
+ puts(" (Missing bd_type!)");
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+#ifdef CONFIG_IDE_RESET
+#define FPGA_MODE (CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL)
+void ide_set_reset(int on)
+{
+ /*
+ * Assert or deassert CompactFlash Reset Pin
+ */
+ if (on) { /* assert RESET */
+ out_be16((void *)FPGA_MODE,
+ in_be16((void *)FPGA_MODE) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
+ } else { /* release RESET */
+ out_be16((void *)FPGA_MODE,
+ in_be16((void *)FPGA_MODE) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
+ }
+}
+#endif /* CONFIG_IDE_RESET */
+
+#if defined(CONFIG_RESET_PHY_R)
+void reset_phy(void)
+{
+#ifdef CONFIG_LXT971_NO_SLEEP
+
+ /*
+ * Disable sleep mode in LXT971
+ */
+ lxt971_no_sleep();
+#endif
+}
+#endif
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+/* Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+ if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
+ return -1;
+ } else {
+ switch (state) {
+ case 1:
+ /* Enable write access, clear bit GPIO0. */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
+ state = 0;
+ break;
+ case 0:
+ /* Disable write access, set bit GPIO0. */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+ state = 0;
+ break;
+ default:
+ /* Read current status back. */
+ state = (0 == (in_be32((void*)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
+ break;
+ }
+ }
+ return state;
+}
+
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int query = argc == 1;
+ int state = 0;
+
+ if (query) {
+ /* Query write access state. */
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
+ if (state < 0) {
+ puts ("Query of write access state failed.\n");
+ } else {
+ printf ("Write access for device 0x%0x is %sabled.\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ state = 0;
+ }
+ } else {
+ if ('0' == argv[1][0]) {
+ /* Disable write access. */
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+ } else {
+ /* Enable write access. */
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
+ }
+ if (state < 0) {
+ puts ("Setup of write access state failed.\n");
+ }
+ }
+
+ return state;
+}
+
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+ "Enable / disable / query EEPROM write access",
+ ""
+);
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
generated by cgit v1.1 at 2024-06-30 15:49:16 +0000