diff options
Diffstat (limited to 'u-boot/board/freescale/mpc8544ds')
| -rw-r--r-- | u-boot/board/freescale/mpc8544ds/Makefile | 54 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8544ds/ddr.c | 86 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8544ds/law.c | 34 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8544ds/mpc8544ds.c | 302 | ||||
| -rw-r--r-- | u-boot/board/freescale/mpc8544ds/tlb.c | 91 |
5 files changed, 567 insertions, 0 deletions
diff --git a/u-boot/board/freescale/mpc8544ds/Makefile b/u-boot/board/freescale/mpc8544ds/Makefile new file mode 100644 index 0000000..8684f5c --- /dev/null +++ b/u-boot/board/freescale/mpc8544ds/Makefile @@ -0,0 +1,54 @@ +# +# Copyright 2007 Freescale Semiconductor, Inc. +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/u-boot/board/freescale/mpc8544ds/ddr.c b/u-boot/board/freescale/mpc8544ds/ddr.c new file mode 100644 index 0000000..b8330eb --- /dev/null +++ b/u-boot/board/freescale/mpc8544ds/ddr.c @@ -0,0 +1,86 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +static void +get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +{ + i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); +} + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + + if (ctrl_num) { + printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); + return; + } + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); + } +} + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + /* + * Factors to consider for clock adjust: + * - number of chips on bus + * - position of slot + * - DDR1 vs. DDR2? + * - ??? + * + * This needs to be determined on a board-by-board basis. + * 0110 3/4 cycle late + * 0111 7/8 cycle late + */ + popts->clk_adjust = 7; + + /* + * Factors to consider for CPO: + * - frequency + * - ddr1 vs. ddr2 + */ + popts->cpo_override = 10; + + /* + * Factors to consider for write data delay: + * - number of DIMMs + * + * 1 = 1/4 clock delay + * 2 = 1/2 clock delay + * 3 = 3/4 clock delay + * 4 = 1 clock delay + * 5 = 5/4 clock delay + * 6 = 3/2 clock delay + */ + popts->write_data_delay = 3; + + /* 2T timing enable */ + popts->twoT_en = 1; + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; +} diff --git a/u-boot/board/freescale/mpc8544ds/law.c b/u-boot/board/freescale/mpc8544ds/law.c new file mode 100644 index 0000000..59e03fc --- /dev/null +++ b/u-boot/board/freescale/mpc8544ds/law.c @@ -0,0 +1,34 @@ +/* + * Copyright 2008, 2010 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/u-boot/board/freescale/mpc8544ds/mpc8544ds.c b/u-boot/board/freescale/mpc8544ds/mpc8544ds.c new file mode 100644 index 0000000..a48c815 --- /dev/null +++ b/u-boot/board/freescale/mpc8544ds/mpc8544ds.c @@ -0,0 +1,302 @@ +/* + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/io.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <tsec.h> +#include <netdev.h> + +#include "../common/sgmii_riser.h" + +int checkboard (void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); + u8 vboot; + u8 *pixis_base = (u8 *)PIXIS_BASE; + + if ((uint)&gur->porpllsr != 0xe00e0000) { + printf("immap size error %lx\n",(ulong)&gur->porpllsr); + } + printf ("Board: MPC8544DS, Sys ID: 0x%02x, " + "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), + in_8(pixis_base + PIXIS_PVER)); + + vboot = in_8(pixis_base + PIXIS_VBOOT); + if (vboot & PIXIS_VBOOT_FMAP) + printf ("vBank: %d\n", ((vboot & PIXIS_VBOOT_FBANK) >> 6)); + else + puts ("Promjet\n"); + + lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ + lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ + ecm->eedr = 0xffffffff; /* Clear ecm errors */ + ecm->eeer = 0xffffffff; /* Enable ecm errors */ + + return 0; +} + +#ifdef CONFIG_PCI1 +static struct pci_controller pci1_hose; +#endif + +#ifdef CONFIG_PCIE3 +static struct pci_controller pcie3_hose; +#endif + +void pci_init_board(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct fsl_pci_info pci_info; + u32 devdisr, pordevsr, io_sel; + u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; + int first_free_busno = 0; + + int pcie_ep, pcie_configured; + + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + porpllsr = in_be32(&gur->porpllsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + + debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); + + puts("\n"); + +#ifdef CONFIG_PCIE3 + pcie_configured = is_serdes_configured(PCIE3); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ + /* contains both PCIE3 MEM & IO space */ + set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M, + LAW_TRGT_IF_PCIE_3); + SET_STD_PCIE_INFO(pci_info, 3); + pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info.regs); + + /* outbound memory */ + pci_set_region(&pcie3_hose.regions[0], + CONFIG_SYS_PCIE3_MEM_BUS2, + CONFIG_SYS_PCIE3_MEM_PHYS2, + CONFIG_SYS_PCIE3_MEM_SIZE2, + PCI_REGION_MEM); + + pcie3_hose.region_count = 1; + + printf("PCIE3: connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info.regs); + first_free_busno = fsl_pci_init_port(&pci_info, + &pcie3_hose, first_free_busno); + + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + */ + in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BUS); + } else { + printf("PCIE3: disabled\n"); + } + puts("\n"); +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ +#endif + +#ifdef CONFIG_PCIE1 + SET_STD_PCIE_INFO(pci_info, 1); + first_free_busno = fsl_pcie_init_ctrl(first_free_busno, devdisr, PCIE1, &pci_info); +#else + setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */ +#endif + +#ifdef CONFIG_PCIE2 + SET_STD_PCIE_INFO(pci_info, 2); + first_free_busno = fsl_pcie_init_ctrl(first_free_busno, devdisr, PCIE2, &pci_info); +#else + setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */ +#endif + +#ifdef CONFIG_PCI1 + pci_speed = 66666000; + pci_32 = 1; + pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; + pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; + + if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); + printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", + (pci_32) ? 32 : 64, + (pci_speed == 33333000) ? "33" : + (pci_speed == 66666000) ? "66" : "unknown", + pci_clk_sel ? "sync" : "async", + pci_agent ? "agent" : "host", + pci_arb ? "arbiter" : "external-arbiter", + pci_info.regs); + + first_free_busno = fsl_pci_init_port(&pci_info, + &pci1_hose, first_free_busno); + } else { + printf("PCI: disabled\n"); + } + + puts("\n"); +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ +#endif +} + +int last_stage_init(void) +{ + return 0; +} + + +unsigned long +get_board_sys_clk(ulong dummy) +{ + u8 i, go_bit, rd_clks; + ulong val = 0; + u8 *pixis_base = (u8 *)PIXIS_BASE; + + go_bit = in_8(pixis_base + PIXIS_VCTL); + go_bit &= 0x01; + + rd_clks = in_8(pixis_base + PIXIS_VCFGEN0); + rd_clks &= 0x1C; + + /* + * Only if both go bit and the SCLK bit in VCFGEN0 are set + * should we be using the AUX register. Remember, we also set the + * GO bit to boot from the alternate bank on the on-board flash + */ + + if (go_bit) { + if (rd_clks == 0x1c) + i = in_8(pixis_base + PIXIS_AUX); + else + i = in_8(pixis_base + PIXIS_SPD); + } else { + i = in_8(pixis_base + PIXIS_SPD); + } + + i &= 0x07; + + switch (i) { + case 0: + val = 33333333; + break; + case 1: + val = 40000000; + break; + case 2: + val = 50000000; + break; + case 3: + val = 66666666; + break; + case 4: + val = 83000000; + break; + case 5: + val = 100000000; + break; + case 6: + val = 133333333; + break; + case 7: + val = 166666666; + break; + } + + return val; +} + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_TSEC_ENET + struct tsec_info_struct tsec_info[2]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (is_serdes_configured(SGMII_TSEC1)) { + puts("eTSEC1 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (is_serdes_configured(SGMII_TSEC3)) { + puts("eTSEC3 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + + if (is_serdes_configured(SGMII_TSEC1) || + is_serdes_configured(SGMII_TSEC3)) { + fsl_sgmii_riser_init(tsec_info, num); + } + + + tsec_eth_init(bis, tsec_info, num); +#endif + return pci_eth_init(bis); +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + + FT_FSL_PCI_SETUP; + +#ifdef CONFIG_FSL_SGMII_RISER + fsl_sgmii_riser_fdt_fixup(blob); +#endif +} +#endif diff --git a/u-boot/board/freescale/mpc8544ds/tlb.c b/u-boot/board/freescale/mpc8544ds/tlb.c new file mode 100644 index 0000000..d99441b --- /dev/null +++ b/u-boot/board/freescale/mpc8544ds/tlb.c @@ -0,0 +1,91 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + /* + * TLB 0: 64M Non-cacheable, guarded + * 0xfc000000 64M Covers FLASH at 0xFE800000 and 0xFF800000 + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_64M, 1), + /* + * TLB 1: 1G Non-cacheable, guarded + * 0x80000000 1G PCIE 8,9,a,b + */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE_VIRT, CONFIG_SYS_PCIE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1G, 1), + + /* + * TLB 2: 256M Non-cacheable, guarded + */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCI_VIRT, CONFIG_SYS_PCI_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 3: 256M Non-cacheable, guarded + */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCI_VIRT + 0x10000000, CONFIG_SYS_PCI_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 4: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe100_0000 255M PCI IO range + */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 5: 64M Non-cacheable, guarded + * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF + */ + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_NONCACHE_BASE, CONFIG_SYS_LBC_NONCACHE_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_64M, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); |