diff options
Diffstat (limited to 'u-boot/board/goldelico/gta04b7/gta04b7.h')
| -rw-r--r-- | u-boot/board/goldelico/gta04b7/gta04b7.h | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/u-boot/board/goldelico/gta04b7/gta04b7.h b/u-boot/board/goldelico/gta04b7/gta04b7.h new file mode 100644 index 0000000..f202949 --- /dev/null +++ b/u-boot/board/goldelico/gta04b7/gta04b7.h @@ -0,0 +1,61 @@ +// all reuseable pins on GTA04 expansion connector + +// GPIO -> GTA04-Pin -> Expander function + +#define MUX_EXPANDER_B4() \ +MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) /*GPIO_10 / KEYIRQ - TRF-IRQ*/\ +MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | EN | M4)) /*GPIO_12 / McBSP5-CLKX - Enable 3.3V LDO for display*/\ +MUX_VAL(CP(ETK_D0), (IEN | PTD | EN | M1)) /*GPIO_14 / MCSPI3-SIMO -> TRF*/\ +MUX_VAL(CP(ETK_D1), (IEN | PTD | EN | M1)) /*GPIO_15 / MCSPI3-SOMI -> TRF*/\ +MUX_VAL(CP(ETK_D2), (IEN | PTD | EN | M1)) /*GPIO_16 / MCSPI3-CS -> TRF*/\ +MUX_VAL(CP(ETK_D3), (IEN | PTD | EN | M1)) /*GPIO_17 / MCSPI3-CLK -> TRF*/\ +MUX_VAL(CP(ETK_D4_ES2), (IDIS | PTU | EN | M4)) /*GPIO_18 / McBSP5-DR - drives RS232 EXT line*/\ +MUX_VAL(CP(ETK_D5_ES2), (IDIS | PTD | EN | M4)) /*GPIO_19 / McBSP5-FSX - TRF79x0 EN/EN2*/\ +MUX_VAL(CP(ETK_D6_ES2), (IDIS | PTD | EN | M4)) /*GPIO_20 / McBSP5-DX - Enable 5V on VBUS*/\ +MUX_VAL(CP(UART2_CTS), (IEN | PTU | DIS | M4)) /*GPIO_144 / UART2-CTS - ext Ant */\ +MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_145 / UART2-RTS - GPS ON(0)/OFF(1)*/\ +MUX_VAL(CP(UART2_TX), (IDIS | PTU | DIS | M0)) /*GPIO_146 / UART2-TX - GPS_TX */\ +MUX_VAL(CP(UART2_RX), (IEN | PTU | DIS | M0)) /*GPIO_147 / UART2-RX - GPS_RX */\ +MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M0)) /*GPIO_152 / MCBSP4_CLKX*/\ +MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M0)) /*GPIO_153 / MCBSP4_DR*/\ +MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M0)) /*GPIO_154 / MCBSP4_DX*/\ +MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M0)) /*GPIO_155 / MCBSP4_FSX*/\ +MUX_VAL(CP(MCBSP_CLKS), (IDIS | PTD | DIS | M4)) /*GPIO_160 / PENIRQ*/\ +muxname="GTA04B4" + +#if 0 +MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M0)) /*GPIO_163 / UART3-CTS*/\ +MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*GPIO_164 / UART3-RTS*/\ +MUX_VAL(CP(UART3_RX_IRRX), (IDIS | PTD | DIS | M0)) /*GPIO_165 / UART3-RX*/\ +MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*GPIO_166 / UART3-TX*/\ + +#endif + +// FIXME: clean up so that we have the right PinMuxes +#if 0 + +MUX_VAL(CP(ETK_D0), (IEN | PTD | EN | M1)) /*GPIO_17 -> MCSPI3-CLK -> TRF*/\ +MUX_VAL(CP(MMC2_CLK), (IDIS | PTD | EN | M4)) /*GPIO_130 -> MCSPI3-CLK -> TRF*/\ +MUX_VAL(CP(MMC2_CMD), (IDIS | PTD | EN | M4)) /*GPIO_131 -> MCSPI3-SIMO -> TRF*/\ +MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132 -> MCSPI3-SOMI -> TRF*/\ +MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | EN | M4)) /*GPIO_158 - Display STBY */\ +MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | EN | M4)) /*GPIO_159 - McBSP1-DR -> TRF EN2 */\ +MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | EN | M4)) /*GPIO_161 - McBSP1-FSX -> TRF EN */\ + +MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133 -> UART3-RX (software)*/\ +MUX_VAL(CP(MMC2_DAT2), (IDIS | PTU | EN | M4)) /*GPIO_134 -> UART3-TX (software)*/\ +MUX_VAL(CP(MMC2_DAT3), (IDIS | PTU | EN | M1)) /*GPIO_135 -> MCSPI3-CS0*/\ +MUX_VAL(CP(MMC2_DAT4), (IEN | PTD | EN | M4)) /*GPIO_136 - AUX */\ +MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137 - POWER */\ +MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) /*GPIO_138 - UART3-RTS (software) */\ +MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139 - UART3-CTS (software) */\ +MUX_VAL(CP(UART2_RX), (IEN | PTU | EN | M4)) /*GPIO_143 - UART2-RX */\ +MUX_VAL(CP(UART2_CTS), (IDIS | PTU | EN | M4)) /*GPIO_144 - UART2-CTS */\ +MUX_VAL(CP(UART2_RTS), (IDIS | PTU | EN | M4)) /*GPIO_145 - UART2-RTS */\ +MUX_VAL(CP(UART2_TX), (IEN | PTU | EN | M4)) /*GPIO_146 - UART2-TX */\ +MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | EN | M4)) /*GPIO_156 - KEYIRQ -> TRF IRQ */\ +MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157 - PENIRQ */\ +MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS */\ +MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | EN | M4)) /*GPIO_162 - McBSP1-CLKX -> UART3 Powerdown */ + +#endif |