summaryrefslogtreecommitdiffstats
path: root/u-boot/board/netstal/hcu5/sdram.c
diff options
context:
space:
mode:
Diffstat (limited to 'u-boot/board/netstal/hcu5/sdram.c')
-rw-r--r--u-boot/board/netstal/hcu5/sdram.c283
1 files changed, 283 insertions, 0 deletions
diff --git a/u-boot/board/netstal/hcu5/sdram.c b/u-boot/board/netstal/hcu5/sdram.c
new file mode 100644
index 0000000..e5ac46b
--- /dev/null
+++ b/u-boot/board/netstal/hcu5/sdram.c
@@ -0,0 +1,283 @@
+/*
+ * (C) Copyright 2007
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debug output */
+#undef DEBUG
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/ppc440.h>
+
+void hcu_led_set(u32 value);
+void dcbz_area(u32 start_address, u32 num_bytes);
+
+#define ECC_RAM 0x03267F0B
+#define NO_ECC_RAM 0x00267F0B
+
+#define HCU_HW_SDRAM_CONFIG_MASK 0x7
+
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
+ /* disable caching on DDR2 */
+
+void board_add_ram_info(int use_default)
+{
+ PPC4xx_SYS_INFO board_cfg;
+ u32 val;
+
+ mfsdram(DDR0_22, val);
+ val &= DDR0_22_CTRL_RAW_MASK;
+ switch (val) {
+ case DDR0_22_CTRL_RAW_ECC_DISABLE:
+ puts(" (ECC disabled");
+ break;
+ case DDR0_22_CTRL_RAW_ECC_CHECK_ONLY:
+ puts(" (ECC check only");
+ break;
+ case DDR0_22_CTRL_RAW_NO_ECC_RAM:
+ puts(" (no ECC ram");
+ break;
+ case DDR0_22_CTRL_RAW_ECC_ENABLE:
+ puts(" (ECC enabled");
+ break;
+ }
+
+ get_sys_info(&board_cfg);
+ printf(", %lu MHz", (board_cfg.freqPLB * 2) / 1000000);
+
+ mfsdram(DDR0_03, val);
+ val = DDR0_03_CASLAT_DECODE(val);
+ printf(", CL%d)", val);
+}
+
+/*--------------------------------------------------------------------
+ * wait_for_dlllock.
+ *--------------------------------------------------------------------*/
+static int wait_for_dlllock(void)
+{
+ unsigned long val;
+ int wait = 0;
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ mtdcr(SDRAM0_CFGADDR, DDR0_17);
+ val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+ while (wait != 0xffff) {
+ val = mfdcr(SDRAM0_CFGDATA);
+ if ((val & DDR0_17_DLLLOCKREG_MASK) ==
+ DDR0_17_DLLLOCKREG_LOCKED)
+ /* dlllockreg bit on */
+ return 0;
+ else
+ wait++;
+ }
+ debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+ debug("Waiting for dlllockreg bit to raise\n");
+
+ return -1;
+}
+
+/***********************************************************************
+ *
+ * sdram_panic -- Panic if we cannot configure the sdram correctly
+ *
+ ************************************************************************/
+void sdram_panic(const char *reason)
+{
+ printf("\n%s: reason %s", __FUNCTION__, reason);
+ hcu_led_set(0xff);
+ while (1) {
+ }
+ /* Never return */
+}
+
+#ifdef CONFIG_DDR_ECC
+void blank_string(int size)
+{
+ int i;
+
+ for (i=0; i<size; i++)
+ putc('\b');
+ for (i=0; i<size; i++)
+ putc(' ');
+ for (i=0; i<size; i++)
+ putc('\b');
+}
+/*---------------------------------------------------------------------------+
+ * program_ecc.
+ *---------------------------------------------------------------------------*/
+static void program_ecc(unsigned long start_address, unsigned long num_bytes)
+{
+ u32 val;
+ char str[] = "ECC generation -";
+#if defined(CONFIG_PRAM)
+ u32 *magicPtr;
+ u32 magic;
+
+ if ((mfspr(SPRN_DBCR0) & 0x80000000) == 0) {
+ /* only if no external debugger is alive!
+ * Check whether vxWorks is using EDR logging, if yes zero
+ * also PostMortem and user reserved memory
+ */
+ magicPtr = (u32 *)(start_address + num_bytes -
+ (CONFIG_PRAM*1024) + sizeof(u32));
+ magic = in_be32(magicPtr);
+ debug("%s: CONFIG_PRAM %d kB magic 0x%x 0x%p\n",
+ __FUNCTION__, CONFIG_PRAM,
+ magicPtr, magic);
+ if (magic == 0xbeefbabe) {
+ printf("%s: preserving at %p\n", __FUNCTION__, magicPtr);
+ num_bytes -= (CONFIG_PRAM*1024) - PM_RESERVED_MEM;
+ }
+ }
+#endif
+
+ sync();
+
+ puts(str);
+
+ /* ECC bit set method for cached memory */
+ /* Fast method, no noticeable delay */
+ dcbz_area(start_address, num_bytes);
+ /* Write modified dcache lines back to memory */
+ clean_dcache_range(start_address, start_address + num_bytes);
+ blank_string(strlen(str));
+
+ /* Clear error status */
+ mfsdram(DDR0_00, val);
+ mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+
+ /*
+ * Clear possible ECC errors
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
+
+ /* Set 'int_mask' parameter to functionnal value */
+ mfsdram(DDR0_01, val);
+ mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) |
+ DDR0_01_INT_MASK_ALL_OFF));
+
+ return;
+}
+#endif
+
+
+/***********************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+phys_size_t initdram (int board_type)
+{
+ unsigned int dram_size = 0;
+
+ mtsdram(DDR0_02, 0x00000000);
+
+ /* Values must be kept in sync with Excel-table <<A0001492.>> ! */
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02030602);
+ mtsdram(DDR0_04, 0x0A020200);
+ mtsdram(DDR0_05, 0x02020307);
+ switch (in_be16((u16 *)HCU_HW_VERSION_REGISTER) & HCU_HW_SDRAM_CONFIG_MASK) {
+ case 1:
+ dram_size = 256 * 1024 * 1024 ;
+ mtsdram(DDR0_06, 0x0102C812); /* 256MB RAM */
+ mtsdram(DDR0_11, 0x0014C800); /* 256MB RAM */
+ mtsdram(DDR0_43, 0x030A0200); /* 256MB RAM */
+ break;
+ case 0:
+ default:
+ dram_size = 128 * 1024 * 1024 ;
+ mtsdram(DDR0_06, 0x0102C80D); /* 128MB RAM */
+ mtsdram(DDR0_11, 0x000FC800); /* 128MB RAM */
+ mtsdram(DDR0_43, 0x030A0300); /* 128MB RAM */
+ break;
+ }
+ mtsdram(DDR0_07, 0x00090100);
+
+ /*
+ * TCPD=200 cycles of clock input is required to lock the DLL.
+ * CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001);
+ */
+ mtsdram(DDR0_08, 0x02C80001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000100);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x1D000000);
+ mtsdram(DDR0_18, 0x1D1D1D1D);
+ mtsdram(DDR0_19, 0x1D1D1D1D);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+ mtsdram(DDR0_22, ECC_RAM);
+#else
+ mtsdram(DDR0_22, NO_ECC_RAM);
+#endif
+
+ mtsdram(DDR0_23, 0x00000000);
+ mtsdram(DDR0_24, 0x01020001);
+ mtsdram(DDR0_26, 0x2D930517);
+ mtsdram(DDR0_27, 0x00008236);
+ mtsdram(DDR0_28, 0x00000000);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000006);
+ mtsdram(DDR0_44, 0x00000003);
+ mtsdram(DDR0_02, 0x00000001);
+ wait_for_dlllock();
+ mtsdram(DDR0_00, 0x40000000); /* Zero init bit */
+
+ /*
+ * Program tlb entries for this size (dynamic)
+ */
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, 256 << 20);
+ program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE);
+
+ /*
+ * Setup 2nd TLB with same physical address but different virtual
+ * address with cache enabled. This is done for fast ECC generation.
+ */
+ program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, dram_size, 0);
+
+#ifdef CONFIG_DDR_ECC
+ /*
+ * If ECC is enabled, initialize the parity bits.
+ */
+ program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, dram_size);
+#endif
+
+ return (dram_size);
+}