diff options
Diffstat (limited to 'u-boot/board/sbc8548/sbc8548.c')
| -rw-r--r-- | u-boot/board/sbc8548/sbc8548.c | 339 |
1 files changed, 339 insertions, 0 deletions
diff --git a/u-boot/board/sbc8548/sbc8548.c b/u-boot/board/sbc8548/sbc8548.c new file mode 100644 index 0000000..e1a3ea3 --- /dev/null +++ b/u-boot/board/sbc8548/sbc8548.c @@ -0,0 +1,339 @@ +/* + * Copyright 2007,2009 Wind River Systems, Inc. <www.windriver.com> + * + * Copyright 2007 Embedded Specialties, Inc. + * + * Copyright 2004, 2007 Freescale Semiconductor. + * + * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <spd_sdram.h> +#include <netdev.h> +#include <tsec.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> + +DECLARE_GLOBAL_DATA_PTR; + +void local_bus_init(void); + +int board_early_init_f (void) +{ + return 0; +} + +int checkboard (void) +{ + volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); + volatile u_char *rev= (void *)CONFIG_SYS_BD_REV; + + printf ("Board: Wind River SBC8548 Rev. 0x%01x\n", + in_8(rev) >> 4); + + /* + * Initialize local bus. + */ + local_bus_init (); + + out_be32(&ecm->eedr, 0xffffffff); /* clear ecm errors */ + out_be32(&ecm->eeer, 0xffffffff); /* enable ecm errors */ + return 0; +} + +/* + * Initialize Local Bus + */ +void +local_bus_init(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + + uint clkdiv; + uint lbc_hz; + sys_info_t sysinfo; + + get_sys_info(&sysinfo); + clkdiv = (in_be32(&lbc->lcrr) & LCRR_CLKDIV) * 2; + lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + + out_be32(&gur->lbiuiplldcr1, 0x00078080); + if (clkdiv == 16) { + out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0); + } else if (clkdiv == 8) { + out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0); + } else if (clkdiv == 4) { + out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0); + } + + setbits_be32(&lbc->lcrr, 0x00030000); + + asm("sync;isync;msync"); + + out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */ + out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */ +} + +/* + * Initialize SDRAM memory on the Local Bus. + */ +void lbc_sdram_init(void) +{ +#if defined(CONFIG_SYS_LBC_SDRAM_SIZE) + + uint idx; + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; + uint lsdmr_common; + + puts(" SDRAM: "); + + print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + + /* + * Setup SDRAM Base and Option Registers + */ + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); + + out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); + asm("msync"); + + out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT); + out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); + asm("msync"); + + /* + * MPC8548 uses "new" 15-16 style addressing. + */ + lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; + lsdmr_common |= LSDMR_BSMA1516; + + /* + * Issue PRECHARGE ALL command. + */ + out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_PCHALL); + asm("sync;msync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + + /* + * Issue 8 AUTO REFRESH commands. + */ + for (idx = 0; idx < 8; idx++) { + out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_ARFRSH); + asm("sync;msync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + } + + /* + * Issue 8 MODE-set command. + */ + out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_MRW); + asm("sync;msync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + + /* + * Issue NORMAL OP command. + */ + out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_NORMAL); + asm("sync;msync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(200); /* Overkill. Must wait > 200 bus cycles */ + +#endif /* enable SDRAM init */ +} + +#if defined(CONFIG_SYS_DRAM_TEST) +int +testdram(void) +{ + uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; + uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; + uint *p; + + printf("Testing DRAM from 0x%08x to 0x%08x\n", + CONFIG_SYS_MEMTEST_START, + CONFIG_SYS_MEMTEST_END); + + printf("DRAM test phase 1:\n"); + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("DRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("DRAM test phase 2:\n"); + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("DRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("DRAM test passed.\n"); + return 0; +} +#endif + +#if !defined(CONFIG_SPD_EEPROM) +#define CONFIG_SYS_DDR_CONTROL 0xc300c000 +/************************************************************************* + * fixed_sdram init -- doesn't use serial presence detect. + * assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed. + ************************************************************************/ +phys_size_t fixed_sdram(void) +{ + volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + + out_be32(&ddr->cs0_bnds, 0x0000007f); + out_be32(&ddr->cs1_bnds, 0x008000ff); + out_be32(&ddr->cs2_bnds, 0x00000000); + out_be32(&ddr->cs3_bnds, 0x00000000); + out_be32(&ddr->cs0_config, 0x80010101); + out_be32(&ddr->cs1_config, 0x80010101); + out_be32(&ddr->cs2_config, 0x00000000); + out_be32(&ddr->cs3_config, 0x00000000); + out_be32(&ddr->timing_cfg_3, 0x00000000); + out_be32(&ddr->timing_cfg_0, 0x00220802); + out_be32(&ddr->timing_cfg_1, 0x38377322); + out_be32(&ddr->timing_cfg_2, 0x0fa044C7); + out_be32(&ddr->sdram_cfg, 0x4300C000); + out_be32(&ddr->sdram_cfg_2, 0x24401000); + out_be32(&ddr->sdram_mode, 0x23C00542); + out_be32(&ddr->sdram_mode_2, 0x00000000); + out_be32(&ddr->sdram_interval, 0x05080100); + out_be32(&ddr->sdram_md_cntl, 0x00000000); + out_be32(&ddr->sdram_data_init, 0x00000000); + out_be32(&ddr->sdram_clk_cntl, 0x03800000); + asm("sync;isync;msync"); + udelay(500); + + #if defined (CONFIG_DDR_ECC) + /* Enable ECC checking */ + out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | 0x20000000); + #else + out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); + #endif + + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; +} +#endif + +#ifdef CONFIG_PCI1 +static struct pci_controller pci1_hose; +#endif /* CONFIG_PCI1 */ + +#ifdef CONFIG_PCI +void +pci_init_board(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int first_free_busno = 0; + +#ifdef CONFIG_PCI1 + struct fsl_pci_info pci_info; + u32 devdisr = in_be32(&gur->devdisr); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 porpllsr = in_be32(&gur->porpllsr); + + if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; + uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; + uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; + uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */ + + printf("PCI: Host, %d bit, %s MHz, %s, %s\n", + (pci_32) ? 32 : 64, + (pci_speed == 33000000) ? "33" : + (pci_speed == 66000000) ? "66" : "unknown", + pci_clk_sel ? "sync" : "async", + pci_arb ? "arbiter" : "external-arbiter"); + + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + first_free_busno = fsl_pci_init_port(&pci_info, + &pci1_hose, first_free_busno); + } else { + printf("PCI: disabled\n"); + } + + puts("\n"); +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ +#endif + + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */ + + fsl_pcie_init_board(first_free_busno); +} +#endif + +int board_eth_init(bd_t *bis) +{ + tsec_standard_init(bis); + pci_eth_init(bis); + return 0; /* otherwise cpu_eth_init gets run */ +} + +int last_stage_init(void) +{ + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + +#ifdef CONFIG_FSL_PCI_INIT + FT_FSL_PCI_SETUP; +#endif +} +#endif |