diff options
Diffstat (limited to 'u-boot/board/snmc/qs860t/qs860t.c')
| -rw-r--r-- | u-boot/board/snmc/qs860t/qs860t.c | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/u-boot/board/snmc/qs860t/qs860t.c b/u-boot/board/snmc/qs860t/qs860t.c new file mode 100644 index 0000000..fa88707 --- /dev/null +++ b/u-boot/board/snmc/qs860t/qs860t.c @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2003 + * MuLogic B.V. + * + * (C) Copyright 2002 + * Simple Network Magic Corporation, dnevil@snmc.com + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/u-boot.h> +#include <commproc.h> +#include "mpc8xx.h" + +/* ------------------------------------------------------------------------- */ + +static long int dram_size (long int, long int *, long int); + +/* ------------------------------------------------------------------------- */ + +const uint sdram_table[] = +{ + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, + 0x1FF77C47, 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, + 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, + 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, + 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, + 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, + 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, 0xFFFFEC04, + 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, + 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC84, 0xFFFFFC07, 0xFFFFEC04, 0xFFFFEC04, + 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x7FFFFC07, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04 +}; + +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + * + * Test ID string (QS860T...) + * + * Always return 1 + */ + +int checkboard (void) +{ + char *s, *e; + char buf[64]; + int i; + + i = getenv_f("serial#", buf, sizeof(buf)); + s = (i>0) ? buf : NULL; + + if (!s || strncmp(s, "QS860T", 6)) { + puts ("### No HW ID - assuming QS860T"); + } else { + for (e=s; *e; ++e) { + if (*e == ' ') + break; + } + + for ( ; s<e; ++s) { + putc (*s); + } + } + putc ('\n'); + + return (0); +} + +/* ------------------------------------------------------------------------- */ + +phys_size_t initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size; + + upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + + /* + * Prescaler for refresh + */ + memctl->memc_mptpr = 0x0400; + + /* + * Map controller bank 2 to the SDRAM address + */ + memctl->memc_or2 = CONFIG_SYS_OR2; + memctl->memc_br2 = CONFIG_SYS_BR2; + udelay(200); + + /* perform SDRAM initialization sequence */ + memctl->memc_mbmr = CONFIG_SYS_16M_MBMR; + udelay(100); + + memctl->memc_mar = 0x00000088; + memctl->memc_mcr = 0x80804105; /* run precharge pattern */ + udelay(1); + + /* Run two refresh cycles on SDRAM */ + memctl->memc_mbmr = 0x18802118; + memctl->memc_mcr = 0x80804130; + memctl->memc_mbmr = 0x18802114; + memctl->memc_mcr = 0x80804106; + + udelay (1000); + +#if 0 + /* + * Check for 64M SDRAM Memory Size + */ + size = dram_size (CONFIG_SYS_64M_MBMR, (ulong *)SDRAM_BASE, SDRAM_64M_MAX_SIZE); + udelay (1000); + + /* + * Check for 16M SDRAM Memory Size + */ + if (size != SDRAM_64M_MAX_SIZE) { +#endif + size = dram_size (CONFIG_SYS_16M_MBMR, (long *)SDRAM_BASE, SDRAM_16M_MAX_SIZE); + udelay (1000); +#if 0 + } + + memctl->memc_or2 = ((-size) & 0xFFFF0000) | SDRAM_TIMING; +#endif + + + udelay(10000); + + +#if 0 + + /* + * Also, map other memory to correct position + */ + + /* + * Map the 8M Intel Flash device to chip select 1 + */ + memctl->memc_or1 = CONFIG_SYS_OR1; + memctl->memc_br1 = CONFIG_SYS_BR1; + + + /* + * Map 64K NVRAM, Sipex Device, NAND Ctl Reg, and LED Ctl Reg + * to chip select 3 + */ + memctl->memc_or3 = CONFIG_SYS_OR3; + memctl->memc_br3 = CONFIG_SYS_BR3; + + /* + * Map chip selects 4, 5, 6, & 7 for external expansion connector + */ + memctl->memc_or4 = CONFIG_SYS_OR4; + memctl->memc_br4 = CONFIG_SYS_BR4; + + memctl->memc_or5 = CONFIG_SYS_OR5; + memctl->memc_br5 = CONFIG_SYS_BR5; + + memctl->memc_or6 = CONFIG_SYS_OR6; + memctl->memc_br6 = CONFIG_SYS_BR6; + + memctl->memc_or7 = CONFIG_SYS_OR7; + memctl->memc_br7 = CONFIG_SYS_BR7; + +#endif + + return (size); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + +static long int dram_size (long int mbmr_value, long int *base, long int maxsize) +{ + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + memctl->memc_mbmr = mbmr_value; + + return (get_ram_size(base, maxsize)); +} |