1 files changed, 98 insertions, 0 deletions
diff --git a/u-boot/board/ti/panda/panda.c b/u-boot/board/ti/panda/panda.c
new file mode 100644
index 0000000..78e1910
--- /dev/null
+++ b/u-boot/board/ti/panda/panda.c
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ * Steve Sakoman  <steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+
+#include "panda.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+	"Board: OMAP4 Panda\n"
+};
+
+/**
+ * @brief board_init
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+	gpmc_init();
+
+	gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA;
+	gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return 0;
+}
+
+/**
+ * @brief misc_init_r - Configure Panda board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+	return 0;
+}
+
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+{
+	int i;
+	struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+
+	for (i = 0; i < size; i++, pad++)
+		writew(pad->val, base + pad->offset);
+}
+
+/**
+ * @brief set_muxconf_regs Setting up the configuration Mux registers
+ * specific to the board.
+ */
+void set_muxconf_regs(void)
+{
+	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
+		   sizeof(core_padconf_array) /
+		   sizeof(struct pad_conf_entry));
+
+	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
+		   sizeof(wkup_padconf_array) /
+		   sizeof(struct pad_conf_entry));
+}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0);
+	return 0;
+}
+#endif