1 files changed, 104 insertions, 0 deletions
diff --git a/u-boot/doc/README.sh b/u-boot/doc/README.sh
new file mode 100644
index 0000000..6baee08
--- /dev/null
+++ b/u-boot/doc/README.sh
@@ -0,0 +1,104 @@
+
+U-Boot for Renesas SuperH
+	Last update 01/18/2008 by Nobuhiro Iwamatsu
+
+================================================================================
+0. What's this?
+	This file contains status information for the port of U-Boot to the
+	Renesas SuperH series of CPUs.
+
+================================================================================
+1. Overview
+	SuperH has an original boot loader. However, source code is dirty, and
+	maintenance is not done.
+	To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
+	started the porting to u-boot in 2007.
+
+================================================================================
+2. Supported CPUs
+
+	2.1. Renesas SH7750/SH7750R
+		This CPU has the SH4 core.
+
+	2.2. Renesas SH7722
+		This CPU has the SH4AL-DSP core.
+
+	2.3. Renesas SH7720
+		This CPU has the SH3 core.
+
+	2.4. Renesas SH7710/SH7712
+		This CPU has the SH3-DSP core and Ethernet controller.
+
+	2.5. Renesas SH7780
+		This CPU has the SH4A core.
+
+================================================================================
+3. Supported Boards
+
+	3.1. Hitachi UL MS7750SE01/MS7750RSE01
+		Board specific code is in board/ms7750se
+		To use this board, type "make ms7750se_config".
+		Support devices are :
+			- SCIF
+			- SDRAM
+			- NOR Flash
+			- Marubun PCMCIA
+
+	3.2. Hitachi UL MS7722SE01
+		Board specific code is in board/ms7722se
+		To use this board, type "make ms7722se_config".
+		Support devices are :
+			- SCIF
+			- SDRAM
+			- NOR Flash
+			- Marubun PCMCIA
+			- SMC91x ethernet
+
+	3.2. Hitachi UL MS7720ERP01
+		Board specific code is in board/ms7720se
+		To use this board, type "make ms7720se_config".
+		Support devices are :
+			- SCIF
+			- SDRAM
+			- NOR Flash
+			- Marubun PCMCIA
+
+	3.3. Renesas R7780MP
+		Board specific code is in board/r7780mp
+		To use this board, type "make r7780mp_config".
+		Support devices are :
+			- SCIF
+			- DDR-SDRAM
+			- NOR Flash
+			- Compact Flash
+			- ASIX ethernet
+			- SH7780 PCI bridge
+			- RTL8110 ethernet
+
+	** README **
+		In SuperH, S-record and binary of made u-boot work on the memory.
+		When u-boot is written in the flash, it is necessary to change the
+		address by using 'objcopy'.
+		ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
+
+================================================================================
+4. Compiler
+	You can use the following of u-boot to compile.
+		- SuperH Linux Open site
+			http://www.superh-linux.org/
+		- KPIT GNU tools
+			http://www.kpitgnutools.com/
+
+================================================================================
+5. Future
+	I plan to support the following CPUs and boards.
+		5.1. CPUs
+			- SH7751R(SH4)
+			- SH7785(SH4)
+
+		5.2. Boards
+			- Many boards ;-)
+
+================================================================================
+Copyright (c) 2007,2008
+    Nobuhiro Iwamatsu <iwamatsu@nigaur.org>