diff options
Diffstat (limited to 'u-boot/drivers/dma/fsl_dma.c')
| -rw-r--r-- | u-boot/drivers/dma/fsl_dma.c | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/u-boot/drivers/dma/fsl_dma.c b/u-boot/drivers/dma/fsl_dma.c new file mode 100644 index 0000000..09c18c1 --- /dev/null +++ b/u-boot/drivers/dma/fsl_dma.c @@ -0,0 +1,182 @@ +/* + * Copyright 2004,2007,2008 Freescale Semiconductor, Inc. + * (C) Copyright 2002, 2003 Motorola Inc. + * Xianghua Xiao (X.Xiao@motorola.com) + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/fsl_dma.h> + +/* Controller can only transfer 2^26 - 1 bytes at a time */ +#define FSL_DMA_MAX_SIZE (0x3ffffff) + +#if defined(CONFIG_MPC83xx) +#define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_CTM_DIRECT | FSL_DMA_MR_DMSEN) +#else +#define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT) +#endif + + +#if defined(CONFIG_MPC83xx) +dma83xx_t *dma_base = (void *)(CONFIG_SYS_MPC83xx_DMA_ADDR); +#elif defined(CONFIG_MPC85xx) +ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); +#elif defined(CONFIG_MPC86xx) +ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); +#else +#error "Freescale DMA engine not supported on your processor" +#endif + +static void dma_sync(void) +{ +#if defined(CONFIG_MPC85xx) + asm("sync; isync; msync"); +#elif defined(CONFIG_MPC86xx) + asm("sync; isync"); +#endif +} + +static void out_dma32(volatile unsigned *addr, int val) +{ +#if defined(CONFIG_MPC83xx) + out_le32(addr, val); +#else + out_be32(addr, val); +#endif +} + +static uint in_dma32(volatile unsigned *addr) +{ +#if defined(CONFIG_MPC83xx) + return in_le32(addr); +#else + return in_be32(addr); +#endif +} + +static uint dma_check(void) { + volatile fsl_dma_t *dma = &dma_base->dma[0]; + uint status; + + /* While the channel is busy, spin */ + do { + status = in_dma32(&dma->sr); + } while (status & FSL_DMA_SR_CB); + + /* clear MR[CS] channel start bit */ + out_dma32(&dma->mr, in_dma32(&dma->mr) & ~FSL_DMA_MR_CS); + dma_sync(); + + if (status != 0) + printf ("DMA Error: status = %x\n", status); + + return status; +} + +#if !defined(CONFIG_MPC83xx) +void dma_init(void) { + volatile fsl_dma_t *dma = &dma_base->dma[0]; + + out_dma32(&dma->satr, FSL_DMA_SATR_SREAD_SNOOP); + out_dma32(&dma->datr, FSL_DMA_DATR_DWRITE_SNOOP); + out_dma32(&dma->sr, 0xffffffff); /* clear any errors */ + dma_sync(); +} +#endif + +int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { + volatile fsl_dma_t *dma = &dma_base->dma[0]; + uint xfer_size; + + while (count) { + xfer_size = MIN(FSL_DMA_MAX_SIZE, count); + + out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF)); + out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF)); + out_dma32(&dma->satr, + in_dma32(&dma->satr) | (u32)((u64)src >> 32)); + out_dma32(&dma->datr, + in_dma32(&dma->datr) | (u32)((u64)dest >> 32)); + out_dma32(&dma->bcr, xfer_size); + dma_sync(); + + /* Prepare mode register */ + out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT); + dma_sync(); + + /* Start the transfer */ + out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT | FSL_DMA_MR_CS); + + count -= xfer_size; + src += xfer_size; + dest += xfer_size; + + dma_sync(); + + if (dma_check()) + return -1; + } + + return 0; +} + +/* + * 85xx/86xx use dma to initialize SDRAM when !CONFIG_ECC_INIT_VIA_DDRCONTROLLER + * while 83xx uses dma to initialize SDRAM when CONFIG_DDR_ECC_INIT_VIA_DMA + */ +#if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \ + !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) || \ + (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA))) +void dma_meminit(uint val, uint size) +{ + uint *p = 0; + uint i = 0; + + for (*p = 0; p < (uint *)(8 * 1024); p++) { + if (((uint)p & 0x1f) == 0) + ppcDcbz((ulong)p); + + *p = (uint)CONFIG_MEM_INIT_VALUE; + + if (((uint)p & 0x1c) == 0x1c) + ppcDcbf((ulong)p); + } + + dmacpy(0x002000, 0, 0x002000); /* 8K */ + dmacpy(0x004000, 0, 0x004000); /* 16K */ + dmacpy(0x008000, 0, 0x008000); /* 32K */ + dmacpy(0x010000, 0, 0x010000); /* 64K */ + dmacpy(0x020000, 0, 0x020000); /* 128K */ + dmacpy(0x040000, 0, 0x040000); /* 256K */ + dmacpy(0x080000, 0, 0x080000); /* 512K */ + dmacpy(0x100000, 0, 0x100000); /* 1M */ + dmacpy(0x200000, 0, 0x200000); /* 2M */ + dmacpy(0x400000, 0, 0x400000); /* 4M */ + + for (i = 1; i < size / 0x800000; i++) + dmacpy((0x800000 * i), 0, 0x800000); +} +#endif |