diff options
Diffstat (limited to 'u-boot/drivers/net/altera_tse.c')
| -rw-r--r-- | u-boot/drivers/net/altera_tse.c | 942 |
1 files changed, 942 insertions, 0 deletions
diff --git a/u-boot/drivers/net/altera_tse.c b/u-boot/drivers/net/altera_tse.c new file mode 100644 index 0000000..54a944b --- /dev/null +++ b/u-boot/drivers/net/altera_tse.c @@ -0,0 +1,942 @@ +/* + * Altera 10/100/1000 triple speed ethernet mac driver + * + * Copyright (C) 2008 Altera Corporation. + * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <net.h> +#include <command.h> +#include <asm/cache.h> +#include <asm/dma-mapping.h> +#include <miiphy.h> +#include "altera_tse.h" + +/* sgdma debug - print descriptor */ +static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc) +{ + debug("SGDMA DEBUG :\n"); + debug("desc->source : 0x%x \n", (unsigned int)desc->source); + debug("desc->destination : 0x%x \n", (unsigned int)desc->destination); + debug("desc->next : 0x%x \n", (unsigned int)desc->next); + debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad); + debug("desc->destination_pad : 0x%x \n", + (unsigned int)desc->destination_pad); + debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad); + debug("desc->bytes_to_transfer : 0x%x \n", + (unsigned int)desc->bytes_to_transfer); + debug("desc->actual_bytes_transferred : 0x%x \n", + (unsigned int)desc->actual_bytes_transferred); + debug("desc->descriptor_status : 0x%x \n", + (unsigned int)desc->descriptor_status); + debug("desc->descriptor_control : 0x%x \n", + (unsigned int)desc->descriptor_control); +} + +/* This is a generic routine that the SGDMA mode-specific routines + * call to populate a descriptor. + * arg1 :pointer to first SGDMA descriptor. + * arg2 :pointer to next SGDMA descriptor. + * arg3 :Address to where data to be written. + * arg4 :Address from where data to be read. + * arg5 :no of byte to transaction. + * arg6 :variable indicating to generate start of packet or not + * arg7 :read fixed + * arg8 :write fixed + * arg9 :read burst + * arg10 :write burst + * arg11 :atlantic_channel number + */ +static void alt_sgdma_construct_descriptor_burst( + volatile struct alt_sgdma_descriptor *desc, + volatile struct alt_sgdma_descriptor *next, + unsigned int *read_addr, + unsigned int *write_addr, + unsigned short length_or_eop, + int generate_eop, + int read_fixed, + int write_fixed_or_sop, + int read_burst, + int write_burst, + unsigned char atlantic_channel) +{ + /* + * Mark the "next" descriptor as "not" owned by hardware. This prevents + * The SGDMA controller from continuing to process the chain. This is + * done as a single IO write to bypass cache, without flushing + * the entire descriptor, since only the 8-bit descriptor status must + * be flushed. + */ + if (!next) + debug("Next descriptor not defined!!\n"); + + next->descriptor_control = (next->descriptor_control & + ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK); + + desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF); + desc->destination = + (unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF); + desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF); + desc->source_pad = 0x0; + desc->destination_pad = 0x0; + desc->next_pad = 0x0; + desc->bytes_to_transfer = length_or_eop; + desc->actual_bytes_transferred = 0; + desc->descriptor_status = 0x0; + + /* SGDMA burst not currently supported */ + desc->read_burst = 0; + desc->write_burst = 0; + + /* + * Set the descriptor control block as follows: + * - Set "owned by hardware" bit + * - Optionally set "generate EOP" bit + * - Optionally set the "read from fixed address" bit + * - Optionally set the "write to fixed address bit (which serves + * serves as a "generate SOP" control bit in memory-to-stream mode). + * - Set the 4-bit atlantic channel, if specified + * + * Note this step is performed after all other descriptor information + * has been filled out so that, if the controller already happens to be + * pointing at this descriptor, it will not run (via the "owned by + * hardware" bit) until all other descriptor has been set up. + */ + + desc->descriptor_control = + ((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) | + (generate_eop ? + ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) | + (read_fixed ? + ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) | + (write_fixed_or_sop ? + ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) | + (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0) + ); +} + +static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev, + volatile struct alt_sgdma_descriptor *desc) +{ + unsigned int status; + int counter = 0; + + /* Wait for any pending transfers to complete */ + alt_sgdma_print_desc(desc); + status = dev->status; + + counter = 0; + while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) { + if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) + break; + } + + if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) + debug("Timeout waiting sgdma in do sync!\n"); + + /* + * Clear any (previous) status register information + * that might occlude our error checking later. + */ + dev->status = 0xFF; + + /* Point the controller at the descriptor */ + dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF; + debug("next desc in sgdma 0x%x\n", + (unsigned int)dev->next_descriptor_pointer); + + /* + * Set up SGDMA controller to: + * - Disable interrupt generation + * - Run once a valid descriptor is written to controller + * - Stop on an error with any particular descriptor + */ + dev->control = (ALT_SGDMA_CONTROL_RUN_MSK | + ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK); + + /* Wait for the descriptor (chain) to complete */ + status = dev->status; + debug("wait for sgdma...."); + while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) + ; + debug("done\n"); + + /* Clear Run */ + dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK)); + + /* Get & clear status register contents */ + status = dev->status; + dev->status = 0xFF; + + /* we really should check if the transfer completes properly */ + debug("tx sgdma status = 0x%x", status); + return 0; +} + +static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev, + volatile struct alt_sgdma_descriptor *desc) +{ + unsigned int status; + int counter = 0; + + /* Wait for any pending transfers to complete */ + alt_sgdma_print_desc(desc); + status = dev->status; + + counter = 0; + while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) { + if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) + break; + } + + if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) + debug("Timeout waiting sgdma in do async!\n"); + + /* + * Clear any (previous) status register information + * that might occlude our error checking later. + */ + dev->status = 0xFF; + + /* Point the controller at the descriptor */ + dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF; + + /* + * Set up SGDMA controller to: + * - Disable interrupt generation + * - Run once a valid descriptor is written to controller + * - Stop on an error with any particular descriptor + */ + dev->control = (ALT_SGDMA_CONTROL_RUN_MSK | + ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK); + + /* we really should check if the transfer completes properly */ + return 0; +} + +/* u-boot interface */ +static int tse_adjust_link(struct altera_tse_priv *priv) +{ + unsigned int refvar; + + refvar = priv->mac_dev->command_config.image; + + if (!(priv->duplexity)) + refvar |= ALTERA_TSE_CMD_HD_ENA_MSK; + else + refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK; + + switch (priv->speed) { + case 1000: + refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK; + refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK; + break; + case 100: + refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK; + refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK; + break; + case 10: + refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK; + refvar |= ALTERA_TSE_CMD_ENA_10_MSK; + break; + } + priv->mac_dev->command_config.image = refvar; + + return 0; +} + +static int tse_eth_send(struct eth_device *dev, + volatile void *packet, int length) +{ + struct altera_tse_priv *priv = dev->priv; + volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; + volatile struct alt_sgdma_descriptor *tx_desc = + (volatile struct alt_sgdma_descriptor *)priv->tx_desc; + + volatile struct alt_sgdma_descriptor *tx_desc_cur = + (volatile struct alt_sgdma_descriptor *)&tx_desc[0]; + + flush_dcache((unsigned long)packet, length); + alt_sgdma_construct_descriptor_burst( + (volatile struct alt_sgdma_descriptor *)&tx_desc[0], + (volatile struct alt_sgdma_descriptor *)&tx_desc[1], + (unsigned int *)packet, /* read addr */ + (unsigned int *)0, + length, /* length or EOP ,will change for each tx */ + 0x1, /* gen eop */ + 0x0, /* read fixed */ + 0x1, /* write fixed or sop */ + 0x0, /* read burst */ + 0x0, /* write burst */ + 0x0 /* channel */ + ); + debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length); + + /* send the packet */ + debug("sending packet\n"); + alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur); + debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred); + return tx_desc_cur->actual_bytes_transferred; +} + +static int tse_eth_rx(struct eth_device *dev) +{ + int packet_length = 0; + struct altera_tse_priv *priv = dev->priv; + volatile struct alt_sgdma_descriptor *rx_desc = + (volatile struct alt_sgdma_descriptor *)priv->rx_desc; + volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0]; + + if (rx_desc_cur->descriptor_status & + ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) { + debug("got packet\n"); + packet_length = rx_desc->actual_bytes_transferred; + NetReceive(NetRxPackets[0], packet_length); + + /* start descriptor again */ + flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN); + alt_sgdma_construct_descriptor_burst( + (volatile struct alt_sgdma_descriptor *)&rx_desc[0], + (volatile struct alt_sgdma_descriptor *)&rx_desc[1], + (unsigned int)0x0, /* read addr */ + (unsigned int *)NetRxPackets[0], + 0x0, /* length or EOP */ + 0x0, /* gen eop */ + 0x0, /* read fixed */ + 0x0, /* write fixed or sop */ + 0x0, /* read burst */ + 0x0, /* write burst */ + 0x0 /* channel */ + ); + + /* setup the sgdma */ + alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]); + } + + return -1; +} + +static void tse_eth_halt(struct eth_device *dev) +{ + /* don't do anything! */ + /* this gets called after each uboot */ + /* network command. don't need to reset the thing all of the time */ +} + +static void tse_eth_reset(struct eth_device *dev) +{ + /* stop sgdmas, disable tse receive */ + struct altera_tse_priv *priv = dev->priv; + volatile struct alt_tse_mac *mac_dev = priv->mac_dev; + volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx; + volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; + int counter; + volatile struct alt_sgdma_descriptor *rx_desc = + (volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0]; + + /* clear rx desc & wait for sgdma to complete */ + rx_desc->descriptor_control = 0; + rx_sgdma->control = 0; + counter = 0; + while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) { + if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) + break; + } + + if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) { + debug("Timeout waiting for rx sgdma!\n"); + rx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; + rx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; + } + + counter = 0; + tx_sgdma->control = 0; + while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) { + if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) + break; + } + + if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) { + debug("Timeout waiting for tx sgdma!\n"); + tx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; + tx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; + } + /* reset the mac */ + mac_dev->command_config.bits.transmit_enable = 1; + mac_dev->command_config.bits.receive_enable = 1; + mac_dev->command_config.bits.software_reset = 1; + + counter = 0; + while (mac_dev->command_config.bits.software_reset) { + if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR) + break; + } + + if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR) + debug("TSEMAC SW reset bit never cleared!\n"); +} + +static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum) +{ + volatile struct alt_tse_mac *mac_dev; + unsigned int *mdio_regs; + unsigned int data; + u16 value; + + mac_dev = priv->mac_dev; + + /* set mdio address */ + mac_dev->mdio_phy1_addr = priv->phyaddr; + mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; + + /* get the data */ + data = mdio_regs[regnum]; + + value = data & 0xffff; + + return value; +} + +static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum, + unsigned int value) +{ + volatile struct alt_tse_mac *mac_dev; + unsigned int *mdio_regs; + unsigned int data; + + mac_dev = priv->mac_dev; + + /* set mdio address */ + mac_dev->mdio_phy1_addr = priv->phyaddr; + mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; + + /* get the data */ + data = (unsigned int)value; + + mdio_regs[regnum] = data; + + return 0; +} + +/* MDIO access to phy */ +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII) +static int altera_tse_miiphy_write(const char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + struct eth_device *dev; + struct altera_tse_priv *priv; + dev = eth_get_dev_by_name(devname); + priv = dev->priv; + + tse_mdio_write(priv, (uint) reg, (uint) value); + + return 0; +} + +static int altera_tse_miiphy_read(const char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + struct eth_device *dev; + struct altera_tse_priv *priv; + volatile struct alt_tse_mac *mac_dev; + unsigned int *mdio_regs; + + dev = eth_get_dev_by_name(devname); + priv = dev->priv; + + mac_dev = priv->mac_dev; + mac_dev->mdio_phy1_addr = (int)addr; + mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; + + *value = 0xffff & mdio_regs[reg]; + + return 0; + +} +#endif + +/* + * Also copied from tsec.c + */ +/* Parse the status register for link, and then do + * auto-negotiation + */ +static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv) +{ + /* + * Wait if the link is up, and autonegotiation is in progress + * (ie - we're capable and it's not done) + */ + mii_reg = tse_mdio_read(priv, MIIM_STATUS); + + if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE) + && !(mii_reg & BMSR_ANEGCOMPLETE)) { + int i = 0; + + puts("Waiting for PHY auto negotiation to complete"); + while (!(mii_reg & BMSR_ANEGCOMPLETE)) { + /* + * Timeout reached ? + */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts(" TIMEOUT !\n"); + priv->link = 0; + return 0; + } + + if ((i++ % 1000) == 0) + putc('.'); + udelay(1000); /* 1 ms */ + mii_reg = tse_mdio_read(priv, MIIM_STATUS); + } + puts(" done\n"); + priv->link = 1; + udelay(500000); /* another 500 ms (results in faster booting) */ + } else { + if (mii_reg & MIIM_STATUS_LINK) { + debug("Link is up\n"); + priv->link = 1; + } else { + debug("Link is down\n"); + priv->link = 0; + } + } + + return 0; +} + +/* Parse the 88E1011's status register for speed and duplex + * information + */ +static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv) +{ + uint speed; + + mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS); + + if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) && + !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { + int i = 0; + + puts("Waiting for PHY realtime link"); + while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { + /* Timeout reached ? */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts(" TIMEOUT !\n"); + priv->link = 0; + break; + } + + if ((i++ == 1000) == 0) { + i = 0; + puts("."); + } + udelay(1000); /* 1 ms */ + mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS); + } + puts(" done\n"); + udelay(500000); /* another 500 ms (results in faster booting) */ + } else { + if (mii_reg & MIIM_88E1011_PHYSTAT_LINK) + priv->link = 1; + else + priv->link = 0; + } + + if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX) + priv->duplexity = 1; + else + priv->duplexity = 0; + + speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED); + + switch (speed) { + case MIIM_88E1011_PHYSTAT_GBIT: + priv->speed = 1000; + debug("PHY Speed is 1000Mbit\n"); + break; + case MIIM_88E1011_PHYSTAT_100: + debug("PHY Speed is 100Mbit\n"); + priv->speed = 100; + break; + default: + debug("PHY Speed is 10Mbit\n"); + priv->speed = 10; + } + + return 0; +} + +static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv) +{ + uint mii_data = tse_mdio_read(priv, mii_reg); + mii_data &= 0xfff0; + mii_data |= 0xb; + return mii_data; +} + +static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv) +{ + uint mii_data = tse_mdio_read(priv, mii_reg); + mii_data &= ~0x82; + mii_data |= 0x82; + return mii_data; +} + +/* + * Returns which value to write to the control register. + * For 10/100, the value is slightly different + */ +static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv) +{ + return MIIM_CONTROL_INIT; +} + +/* + * PHY & MDIO code + * Need to add SGMII stuff + * + */ + +static struct phy_info phy_info_M88E1111S = { + 0x01410cc, + "Marvell 88E1111S", + 4, + (struct phy_cmd[]){ /* config */ + /* Reset and configure the PHY */ + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_88E1111_PHY_EXT_SR, 0x848f, + &mii_m88e1111s_setmode_sr}, + /* Delay RGMII TX and RX */ + {MIIM_88E1111_PHY_EXT_CR, 0x0cd2, + &mii_m88e1111s_setmode_cr}, + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, + {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, + {miim_end,} + }, + (struct phy_cmd[]){ /* startup */ + /* Status is read once to clear old link state */ + {MIIM_STATUS, miim_read, NULL}, + /* Auto-negotiate */ + {MIIM_STATUS, miim_read, &mii_parse_sr}, + /* Read the status */ + {MIIM_88E1011_PHY_STATUS, miim_read, + &mii_parse_88E1011_psr}, + {miim_end,} + }, + (struct phy_cmd[]){ /* shutdown */ + {miim_end,} + }, +}; + +/* a generic flavor. */ +static struct phy_info phy_info_generic = { + 0, + "Unknown/Generic PHY", + 32, + (struct phy_cmd[]){ /* config */ + {MII_BMCR, BMCR_RESET, NULL}, + {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL}, + {miim_end,} + }, + (struct phy_cmd[]){ /* startup */ + {MII_BMSR, miim_read, NULL}, + {MII_BMSR, miim_read, &mii_parse_sr}, + {miim_end,} + }, + (struct phy_cmd[]){ /* shutdown */ + {miim_end,} + } +}; + +static struct phy_info *phy_info[] = { + &phy_info_M88E1111S, + NULL +}; + + /* Grab the identifier of the device's PHY, and search through + * all of the known PHYs to see if one matches. If so, return + * it, if not, return NULL + */ +static struct phy_info *get_phy_info(struct eth_device *dev) +{ + struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv; + uint phy_reg, phy_ID; + int i; + struct phy_info *theInfo = NULL; + + /* Grab the bits from PHYIR1, and put them in the upper half */ + phy_reg = tse_mdio_read(priv, MIIM_PHYIR1); + phy_ID = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = tse_mdio_read(priv, MIIM_PHYIR2); + phy_ID |= (phy_reg & 0xffff); + + /* loop through all the known PHY types, and find one that */ + /* matches the ID we read from the PHY. */ + for (i = 0; phy_info[i]; i++) { + if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) { + theInfo = phy_info[i]; + break; + } + } + + if (theInfo == NULL) { + theInfo = &phy_info_generic; + debug("%s: No support for PHY id %x; assuming generic\n", + dev->name, phy_ID); + } else + debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID); + + return theInfo; +} + +/* Execute the given series of commands on the given device's + * PHY, running functions as necessary + */ +static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd) +{ + int i; + uint result; + + for (i = 0; cmd->mii_reg != miim_end; i++) { + if (cmd->mii_data == miim_read) { + result = tse_mdio_read(priv, cmd->mii_reg); + + if (cmd->funct != NULL) + (*(cmd->funct)) (result, priv); + + } else { + if (cmd->funct != NULL) + result = (*(cmd->funct)) (cmd->mii_reg, priv); + else + result = cmd->mii_data; + + tse_mdio_write(priv, cmd->mii_reg, result); + + } + cmd++; + } +} + +/* Phy init code */ +static int init_phy(struct eth_device *dev) +{ + struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv; + struct phy_info *curphy; + + /* Get the cmd structure corresponding to the attached + * PHY */ + curphy = get_phy_info(dev); + + if (curphy == NULL) { + priv->phyinfo = NULL; + debug("%s: No PHY found\n", dev->name); + + return 0; + } else + debug("%s found\n", curphy->name); + priv->phyinfo = curphy; + + phy_run_commands(priv, priv->phyinfo->config); + + return 1; +} + +static int tse_set_mac_address(struct eth_device *dev) +{ + struct altera_tse_priv *priv = dev->priv; + volatile struct alt_tse_mac *mac_dev = priv->mac_dev; + + debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n", + dev->enetaddr[5], dev->enetaddr[4], + dev->enetaddr[3], dev->enetaddr[2], + dev->enetaddr[1], dev->enetaddr[0]); + mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 | + (dev->enetaddr[2]) << 16 | + (dev->enetaddr[1]) << 8 | (dev->enetaddr[0])); + + mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 | + (dev->enetaddr[4])) & 0xFFFF); + + /* Set the MAC address */ + mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0; + mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1; + + /* Set the MAC address */ + mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0; + mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1; + + /* Set the MAC address */ + mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0; + mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1; + + /* Set the MAC address */ + mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0; + mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1; + return 0; +} + +static int tse_eth_init(struct eth_device *dev, bd_t * bd) +{ + int dat; + struct altera_tse_priv *priv = dev->priv; + volatile struct alt_tse_mac *mac_dev = priv->mac_dev; + volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc; + volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc; + volatile struct alt_sgdma_descriptor *rx_desc_cur = + (volatile struct alt_sgdma_descriptor *)&rx_desc[0]; + + /* stop controller */ + debug("Reseting TSE & SGDMAs\n"); + tse_eth_reset(dev); + + /* start the phy */ + debug("Configuring PHY\n"); + phy_run_commands(priv, priv->phyinfo->startup); + + /* need to create sgdma */ + debug("Configuring tx desc\n"); + alt_sgdma_construct_descriptor_burst( + (volatile struct alt_sgdma_descriptor *)&tx_desc[0], + (volatile struct alt_sgdma_descriptor *)&tx_desc[1], + (unsigned int *)NULL, /* read addr */ + (unsigned int *)0, + 0, /* length or EOP ,will change for each tx */ + 0x1, /* gen eop */ + 0x0, /* read fixed */ + 0x1, /* write fixed or sop */ + 0x0, /* read burst */ + 0x0, /* write burst */ + 0x0 /* channel */ + ); + debug("Configuring rx desc\n"); + flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN); + alt_sgdma_construct_descriptor_burst( + (volatile struct alt_sgdma_descriptor *)&rx_desc[0], + (volatile struct alt_sgdma_descriptor *)&rx_desc[1], + (unsigned int)0x0, /* read addr */ + (unsigned int *)NetRxPackets[0], + 0x0, /* length or EOP */ + 0x0, /* gen eop */ + 0x0, /* read fixed */ + 0x0, /* write fixed or sop */ + 0x0, /* read burst */ + 0x0, /* write burst */ + 0x0 /* channel */ + ); + /* start rx async transfer */ + debug("Starting rx sgdma\n"); + alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur); + + /* start TSE */ + debug("Configuring TSE Mac\n"); + /* Initialize MAC registers */ + mac_dev->max_frame_length = PKTSIZE_ALIGN; + mac_dev->rx_almost_empty_threshold = 8; + mac_dev->rx_almost_full_threshold = 8; + mac_dev->tx_almost_empty_threshold = 8; + mac_dev->tx_almost_full_threshold = 3; + mac_dev->tx_sel_empty_threshold = + CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16; + mac_dev->tx_sel_full_threshold = 0; + mac_dev->rx_sel_empty_threshold = + CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16; + mac_dev->rx_sel_full_threshold = 0; + + /* NO Shift */ + mac_dev->rx_cmd_stat.bits.rx_shift16 = 0; + mac_dev->tx_cmd_stat.bits.tx_shift16 = 0; + + /* enable MAC */ + dat = 0; + dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK; + + mac_dev->command_config.image = dat; + + /* configure the TSE core */ + /* -- output clocks, */ + /* -- and later config stuff for SGMII */ + if (priv->link) { + debug("Adjusting TSE to link speed\n"); + tse_adjust_link(priv); + } + + return priv->link ? 0 : -1; +} + +/* TSE init code */ +int altera_tse_initialize(u8 dev_num, int mac_base, + int sgdma_rx_base, int sgdma_tx_base) +{ + struct altera_tse_priv *priv; + struct eth_device *dev; + struct alt_sgdma_descriptor *rx_desc; + struct alt_sgdma_descriptor *tx_desc; + unsigned long dma_handle; + + dev = (struct eth_device *)malloc(sizeof *dev); + + if (NULL == dev) + return 0; + + memset(dev, 0, sizeof *dev); + + priv = malloc(sizeof(*priv)); + + if (!priv) { + free(dev); + return 0; + } + tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX), + &dma_handle); + rx_desc = tx_desc + 2; + debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc); + debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc); + + if (!tx_desc) { + free(priv); + free(dev); + return 0; + } + memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1)); + memset(tx_desc, 0, (sizeof *tx_desc) * 2); + + /* initialize tse priv */ + priv->mac_dev = (volatile struct alt_tse_mac *)mac_base; + priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base; + priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base; + priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR; + priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS; + priv->rx_desc = rx_desc; + priv->tx_desc = tx_desc; + + /* init eth structure */ + dev->priv = priv; + dev->init = tse_eth_init; + dev->halt = tse_eth_halt; + dev->send = tse_eth_send; + dev->recv = tse_eth_rx; + dev->write_hwaddr = tse_set_mac_address; + sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num); + + eth_register(dev); + +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII) + miiphy_register(dev->name, altera_tse_miiphy_read, + altera_tse_miiphy_write); +#endif + + init_phy(dev); + + return 1; +} |