diff options
Diffstat (limited to 'u-boot/include/config_cmd_all.h')
| -rw-r--r-- | u-boot/include/config_cmd_all.h | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/u-boot/include/config_cmd_all.h b/u-boot/include/config_cmd_all.h new file mode 100644 index 0000000..cdc5ff1 --- /dev/null +++ b/u-boot/include/config_cmd_all.h @@ -0,0 +1,93 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License Version 2. This file is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _CONFIG_CMD_ALL_H +#define _CONFIG_CMD_ALL_H + +/* + * Alphabetical list of all possible commands. + */ + +#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */ +#define CONFIG_CMD_ASKENV /* ask for env variable */ +#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */ +#define CONFIG_CMD_BDI /* bdinfo */ +#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */ +#define CONFIG_CMD_BMP /* BMP support */ +#define CONFIG_CMD_BOOTD /* bootd */ +#define CONFIG_CMD_BSP /* Board Specific functions */ +#define CONFIG_CMD_CACHE /* icache, dcache */ +#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */ +#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_DATE /* support for RTC, date/time...*/ +#define CONFIG_CMD_DHCP /* DHCP Support */ +#define CONFIG_CMD_DIAG /* Diagnostics */ +#define CONFIG_CMD_DISPLAY /* Display support */ +#define CONFIG_CMD_DOC /* Disk-On-Chip Support */ +#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */ +#define CONFIG_CMD_ECHO /* echo arguments */ +#define CONFIG_CMD_EDITENV /* editenv */ +#define CONFIG_CMD_EEPROM /* EEPROM read/write support */ +#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_FDC /* Floppy Disk Support */ +#define CONFIG_CMD_FDOS /* Floppy DOS support */ +#define CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_IDE /* IDE harddisk support */ +#define CONFIG_CMD_IMI /* iminfo */ +#define CONFIG_CMD_IMLS /* List all found images */ +#define CONFIG_CMD_IMMAP /* IMMR dump support */ +#define CONFIG_CMD_IRQ /* irqinfo */ +#define CONFIG_CMD_ITEST /* Integer (and string) test */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_KGDB /* kgdb */ +#define CONFIG_CMD_LICENSE /* console license display */ +#define CONFIG_CMD_LOADB /* loadb */ +#define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ +#define CONFIG_CMD_MFSL /* FSL support for Microblaze */ +#define CONFIG_CMD_MG_DISK /* mGine m(g)flash IO node support */ +#define CONFIG_CMD_MII /* MII support */ +#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_MTDPARTS /* mtd parts support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_ONENAND /* OneNAND support */ +#define CONFIG_CMD_PCI /* pciinfo */ +#define CONFIG_CMD_PCMCIA /* PCMCIA support */ +#define CONFIG_CMD_PING /* ping support */ +#define CONFIG_CMD_PORTIO /* Port I/O */ +#define CONFIG_CMD_REGINFO /* Register dump */ +#define CONFIG_CMD_REISER /* Reiserfs support */ +#define CONFIG_CMD_RARP /* rarpboot support */ +#define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SAVEENV /* saveenv */ +#define CONFIG_CMD_SAVES /* save S record dump */ +#define CONFIG_CMD_SCSI /* SCSI Support */ +#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ +#define CONFIG_CMD_SETEXPR /* setexpr support */ +#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SNTP /* SNTP support */ +#define CONFIG_CMD_SOURCE /* "source" command support */ +#define CONFIG_CMD_SPI /* SPI utility */ +#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ +#define CONFIG_CMD_UBI /* UBI Support */ +#define CONFIG_CMD_UBIFS /* UBIFS Support */ +#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ +#define CONFIG_CMD_UNZIP /* unzip from memory to memory */ +#define CONFIG_CMD_USB /* USB Support */ +#define CONFIG_CMD_VFD /* VFD support (TRAB) */ +#define CONFIG_CMD_XIMG /* Load part of Multi Image */ + +#endif /* _CONFIG_CMD_ALL_H */ |