diff options
Diffstat (limited to 'u-boot/include/configs/r2dplus.h')
| -rw-r--r-- | u-boot/include/configs/r2dplus.h | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/u-boot/include/configs/r2dplus.h b/u-boot/include/configs/r2dplus.h new file mode 100644 index 0000000..5534b49 --- /dev/null +++ b/u-boot/include/configs/r2dplus.h @@ -0,0 +1,129 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7751 1 +#define CONFIG_CPU_SH_TYPE_R 1 +#define CONFIG_R2DPLUS 1 +#define __LITTLE_ENDIAN__ 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DFL +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_SH_ZIMAGEBOOT + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF1 1 +#define BOARD_LATE_INIT 1 + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_ENV_OVERWRITE 1 + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE (0x8C000000) +#define CONFIG_SYS_SDRAM_SIZE (0x04000000) + +#define CONFIG_SYS_TEXT_BASE 0x0FFC0000 +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024) +/* Address of u-boot image in Flash */ +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +/* + * NOR Flash ( Spantion S29GL256P ) + */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE (0xA0000000) +#define CONFIG_SYS_MAX_FLASH_BANKS (1) +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x40000 +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + +/* + * SuperH Clock setting + */ +#define CONFIG_SYS_CLK_FREQ 60000000 +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ + +/* + * IDE support + */ +#define CONFIG_IDE_RESET 1 +#define CONFIG_SYS_PIO_MODE 1 +#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 +#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 +#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ +#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ +#define CONFIG_IDE_SWAP_IO + +/* + * SuperH PCI Bridge Configration + */ +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7751_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 +#define __io +#define __mem_pci + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ +#define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ +#define CONFIG_PCI_SYS_BUS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff) +#define CONFIG_PCI_SYS_PHYS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff) +#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE + +/* + * Network device (RTL8139) support + */ +#define CONFIG_NET_MULTI +#define CONFIG_RTL8139 + +#endif /* __CONFIG_H */ |