diff options
Diffstat (limited to 'u-boot/include/linux/mtd/doc2000.h')
| -rw-r--r-- | u-boot/include/linux/mtd/doc2000.h | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/u-boot/include/linux/mtd/doc2000.h b/u-boot/include/linux/mtd/doc2000.h new file mode 100644 index 0000000..ba29d53 --- /dev/null +++ b/u-boot/include/linux/mtd/doc2000.h @@ -0,0 +1,207 @@ +/* + * Linux driver for Disk-On-Chip devices + * + * Copyright (C) 1999 Machine Vision Holdings, Inc. + * Copyright (C) 2001-2003 David Woodhouse <dwmw2@infradead.org> + * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com> + * Copyright (C) 2002-2003 SnapGear Inc + * + * Released under GPL + */ + +#ifndef __MTD_DOC2000_H__ +#define __MTD_DOC2000_H__ + +#include <linux/mtd/mtd.h> +#if 0 +#include <linux/mutex.h> +#endif + +#define DoC_Sig1 0 +#define DoC_Sig2 1 + +#define DoC_ChipID 0x1000 +#define DoC_DOCStatus 0x1001 +#define DoC_DOCControl 0x1002 +#define DoC_FloorSelect 0x1003 +#define DoC_CDSNControl 0x1004 +#define DoC_CDSNDeviceSelect 0x1005 +#define DoC_ECCConf 0x1006 +#define DoC_2k_ECCStatus 0x1007 + +#define DoC_CDSNSlowIO 0x100d +#define DoC_ECCSyndrome0 0x1010 +#define DoC_ECCSyndrome1 0x1011 +#define DoC_ECCSyndrome2 0x1012 +#define DoC_ECCSyndrome3 0x1013 +#define DoC_ECCSyndrome4 0x1014 +#define DoC_ECCSyndrome5 0x1015 +#define DoC_AliasResolution 0x101b +#define DoC_ConfigInput 0x101c +#define DoC_ReadPipeInit 0x101d +#define DoC_WritePipeTerm 0x101e +#define DoC_LastDataRead 0x101f +#define DoC_NOP 0x1020 + +#define DoC_Mil_CDSN_IO 0x0800 +#define DoC_2k_CDSN_IO 0x1800 + +#define DoC_Mplus_NOP 0x1002 +#define DoC_Mplus_AliasResolution 0x1004 +#define DoC_Mplus_DOCControl 0x1006 +#define DoC_Mplus_AccessStatus 0x1008 +#define DoC_Mplus_DeviceSelect 0x1008 +#define DoC_Mplus_Configuration 0x100a +#define DoC_Mplus_OutputControl 0x100c +#define DoC_Mplus_FlashControl 0x1020 +#define DoC_Mplus_FlashSelect 0x1022 +#define DoC_Mplus_FlashCmd 0x1024 +#define DoC_Mplus_FlashAddress 0x1026 +#define DoC_Mplus_FlashData0 0x1028 +#define DoC_Mplus_FlashData1 0x1029 +#define DoC_Mplus_ReadPipeInit 0x102a +#define DoC_Mplus_LastDataRead 0x102c +#define DoC_Mplus_LastDataRead1 0x102d +#define DoC_Mplus_WritePipeTerm 0x102e +#define DoC_Mplus_ECCSyndrome0 0x1040 +#define DoC_Mplus_ECCSyndrome1 0x1041 +#define DoC_Mplus_ECCSyndrome2 0x1042 +#define DoC_Mplus_ECCSyndrome3 0x1043 +#define DoC_Mplus_ECCSyndrome4 0x1044 +#define DoC_Mplus_ECCSyndrome5 0x1045 +#define DoC_Mplus_ECCConf 0x1046 +#define DoC_Mplus_Toggle 0x1046 +#define DoC_Mplus_DownloadStatus 0x1074 +#define DoC_Mplus_CtrlConfirm 0x1076 +#define DoC_Mplus_Power 0x1fff + +/* How to access the device? + * On ARM, it'll be mmap'd directly with 32-bit wide accesses. + * On PPC, it's mmap'd and 16-bit wide. + * Others use readb/writeb + */ +#if defined(__arm__) +#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)))) +#define WriteDOC_(d, adr, reg) do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0) +#define DOC_IOREMAP_LEN 0x8000 +#elif defined(__ppc__) +#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)))) +#define WriteDOC_(d, adr, reg) do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0) +#define DOC_IOREMAP_LEN 0x4000 +#else +#define ReadDOC_(adr, reg) readb((void __iomem *)(adr) + (reg)) +#define WriteDOC_(d, adr, reg) writeb(d, (void __iomem *)(adr) + (reg)) +#define DOC_IOREMAP_LEN 0x2000 + +#endif + +#if defined(__i386__) || defined(__x86_64__) +#define USE_MEMCPY +#endif + +/* These are provided to directly use the DoC_xxx defines */ +#define ReadDOC(adr, reg) ReadDOC_(adr,DoC_##reg) +#define WriteDOC(d, adr, reg) WriteDOC_(d,adr,DoC_##reg) + +#define DOC_MODE_RESET 0 +#define DOC_MODE_NORMAL 1 +#define DOC_MODE_RESERVED1 2 +#define DOC_MODE_RESERVED2 3 + +#define DOC_MODE_CLR_ERR 0x80 +#define DOC_MODE_RST_LAT 0x10 +#define DOC_MODE_BDECT 0x08 +#define DOC_MODE_MDWREN 0x04 + +#define DOC_ChipID_Doc2k 0x20 +#define DOC_ChipID_Doc2kTSOP 0x21 /* internal number for MTD */ +#define DOC_ChipID_DocMil 0x30 +#define DOC_ChipID_DocMilPlus32 0x40 +#define DOC_ChipID_DocMilPlus16 0x41 + +#define CDSN_CTRL_FR_B 0x80 +#define CDSN_CTRL_FR_B0 0x40 +#define CDSN_CTRL_FR_B1 0x80 + +#define CDSN_CTRL_ECC_IO 0x20 +#define CDSN_CTRL_FLASH_IO 0x10 +#define CDSN_CTRL_WP 0x08 +#define CDSN_CTRL_ALE 0x04 +#define CDSN_CTRL_CLE 0x02 +#define CDSN_CTRL_CE 0x01 + +#define DOC_ECC_RESET 0 +#define DOC_ECC_ERROR 0x80 +#define DOC_ECC_RW 0x20 +#define DOC_ECC__EN 0x08 +#define DOC_TOGGLE_BIT 0x04 +#define DOC_ECC_RESV 0x02 +#define DOC_ECC_IGNORE 0x01 + +#define DOC_FLASH_CE 0x80 +#define DOC_FLASH_WP 0x40 +#define DOC_FLASH_BANK 0x02 + +/* We have to also set the reserved bit 1 for enable */ +#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV) +#define DOC_ECC_DIS (DOC_ECC_RESV) + +struct Nand { + char floor, chip; + unsigned long curadr; + unsigned char curmode; + /* Also some erase/write/pipeline info when we get that far */ +}; + +#define MAX_FLOORS 4 +#define MAX_CHIPS 4 + +#define MAX_FLOORS_MIL 1 +#define MAX_CHIPS_MIL 1 + +#define MAX_FLOORS_MPLUS 2 +#define MAX_CHIPS_MPLUS 1 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +struct DiskOnChip { + unsigned long physadr; + void __iomem *virtadr; + unsigned long totlen; + unsigned char ChipID; /* Type of DiskOnChip */ + int ioreg; + + unsigned long mfr; /* Flash IDs - only one type of flash per device */ + unsigned long id; + int chipshift; + char page256; + char pageadrlen; + char interleave; /* Internal interleaving - Millennium Plus style */ + unsigned long erasesize; + + int curfloor; + int curchip; + + int numchips; + struct Nand *chips; + struct mtd_info *nextdoc; +/* XXX U-BOOT XXX */ +#if 0 + struct mutex lock; +#endif +}; + +int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]); + +/* XXX U-BOOT XXX */ +#if 1 +/* + * NAND Flash Manufacturer ID Codes + */ +#define NAND_MFR_TOSHIBA 0x98 +#define NAND_MFR_SAMSUNG 0xec +#endif + +#endif /* __MTD_DOC2000_H__ */ |