summaryrefslogtreecommitdiffstats
path: root/boards.cfg
Commit message (Collapse)AuthorAgeFilesLines
* added boot script files to repositoryH. Nikolaus Schaller2012-03-261-797/+0
|
* added gta04b2 variantH. Nikolaus Schaller2011-06-281-0/+1
|
* git pull denx masterH. Nikolaus Schaller2011-02-241-36/+71
|\
| * Pantheon: Add Board Support for Marvell dkb boardLei Wen2011-02-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with * Processor upto 806Mhz * LPDDR1/2 * x8/x16 SLC/MLC NAND * Footprints for eMMC & MMC x8 card With Peripherals: * Parallel LCD I/F * Audio codecs (88PM8607) * MIPI CSI-2 camera * Marvell 88W8787 802.11n/BT module * Marvell 2G/3G RF * Dual analog mics & speakers, headset jack, LED, ambient * USB2.0 HS host, OTG (mini AB) * GPIO, GPIO expander with DIP switches for easier selection * UART serial over USB, CIR This patch adds basic board support with DRAM and UART functionality Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * arm: Tegra2: Add support for NVIDIA Seaboard boardTom Warren2011-02-211-0/+1
| | | | | | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
| * arm: Tegra2: Add support for NVIDIA Harmony boardTom Warren2011-02-211-0/+1
| | | | | | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
| * Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk2011-02-121-0/+24
| |\
| | * MIPS: Move VCT boards to boards.cfgShinya Kuribayashi2011-02-071-0/+12
| | | | | | | | | | | | | | | Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com> Acked-by: Stefan Roese <sr@denx.de>
| | * MIPS: Move Inca-IP targets to boards.cfgShinya Kuribayashi2011-02-051-0/+4
| | | | | | | | | | | | | | | | | | At the same time, fix up CPU_CLOCK_RATE to have the CONFIG_ prefix to work with boards.cfg. Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| | * MIPS: Move Qemu MIPS target to boards.cfgShinya Kuribayashi2011-02-051-0/+1
| | | | | | | | | | | | | | | | | | CONFIG_QEMU_MIPS is already provided by <configs/qemu-mips.h>, so we don't generate it using the options fields in boards.cfg. Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| | * MIPS: Move Alchemy Au1x00 based boards to boards.cfgShinya Kuribayashi2011-02-051-0/+7
| | | | | | | | | | | | | | | | | | CONFIG_GTH2 is already provided by <configs/gth2.h>, so we don't generate it using the options fields in boards.cfg. Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| * | eNET: Create distinct board configurationsGraeme Russ2011-02-121-1/+2
| | | | | | | | | | | | | | | | | | Position independant functionality is due for removal from the x86 architecture, so create two distinct configurations - One for Flash and one for SRAM
| * | powerpc/85xx: Fix p1_p2_rdb boards.cfgKumar Gala2011-02-091-13/+13
| | | | | | | | | | | | | | | | | | | | | We should have been defining the actual board name in the options, not the processor. Fix this for P1011RDB, P1020RDB, P2010RDB, and P2020RDB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2011-02-091-0/+1
| |\ \ | | |/ | |/|
| | * ppc4xx: Add DLVision-10G board supportDirk Eibach2011-02-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board support for the Guntermann & Drunck DLVision-10G. Adds support for multiple FPGAs per board for gdsys 405ep architecture. Adds support for dual link osd hardware for gdsys 405ep. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2011-02-041-0/+1
| |\ \ | | |/ | |/|
| | * sh: add support for sh7757lcr boardYoshihiro Shimoda2011-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM, Ethernet, and more. This patch supports the following functions: - 256MB DDR3-SDRAM - SPI ROM - Ethernet Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | armv7: add support for s5pc210 universal boardMinkyu Kang2011-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | This patch adds support for Samsung s5pc210 universal board Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| * | OMAP3: add CM-T35 boardMike Rapoport2011-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | This patch adds support for CM-T35 board Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | Add support for Freescale's mx35pdk board.Stefano Babic2011-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds suupport for the Freescale's mx35pdk board (known as well as mx35_3stack). The board boots from the NOR flash. Following devices are supported: - two ethernet devices (FEC and SMC911x on debug board) - I2C - PMIC (MC13892) via I2C interface - UART - NOR flash (64MB) - NAND flash (2GB) - basic access to mc9sdz60 registers via I2C interface Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | iMX5: EfikaMX: Preliminary board supportMarek Vasut2011-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supported: MMC IDE PMIC SPI flash LEDs I can boot the kernel supplied by freescale/genesi with this from MMC card and/or PATA disk. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * | MX5:MX53: add initial support for MX53EVK boardLiu Hui-R643432011-02-021-0/+1
| |/ | | | | | | | | | | | | Add initial support for MX53EVK board support. FEC, SD/MMC, UART, I2C, have been supported. Signed-off-by: Jason Liu <r64343@freescale.com>
| * mpq101: initial support for Mercury Computer Systems MPQ101 boardAlex Dubov2011-01-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mpq101 is a RapidIO development board in AMC form factor, featuring MPC8548 processor, 512MB of hardwired DDR2 RAM, 128MB of hardwired NAND flash memory, real time clock and additional serial EEPROM on i2c bus (enabled). USB controller is available, but not presently enabled. Additional board information is available at: http://www.mc.com/products/boards/ensemble_mpq101_rapidio_powerquicc_iii.aspx Environment is configured to precede the actual u-boot image so that it's located at the beginning of flash erase block (made necessary by the recent changes to the embedded environment handling). This is achieved by means of custom ld script. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * sh: Fix MigoR of boards.cfgNobuhiro Iwamatsu2011-01-191-1/+1
| | | | | | | | | | | | There is not break character between board name and CPU. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * mpc5200, digsy_mtc: add support for rev5 board versionHeiko Schocher2011-01-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | difference to previous board version: - M29W128GH flash from Numonyx - SDRAM ISSI IS45S16800 (Option A2 105°C) - rev5 uses RTC RV-3029-C2 - update cs0 and cs1 baseaddr and length depending on the detected flash size. - added Werner Pfister <Pfister_Werner@intercontrol.de> as maintainer for the digsy board variants - As the M29W128GH needs a special flash_cmd_reset() document that in the new file doc/README.cfi. - move "#endif /* CONFIG_CMD_IDE */" to the right place - remove LOWBOOT config option for digsy_mtc and digsy_mtc_rev5 boards - change doc/README.cfi as Stefan Roese suggested Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> cc: Wolfgang Denk <hs@denx.de> cc: Stefan Roese <sr@denx.de> cc: Werner Pfister <Pfister_Werner@intercontrol.de> cc: Detlev Zundel <dzu@denx.de>
| * ppc, 8xx: remove obsolete km8xx boards from keymileHolger Brunck2011-01-181-2/+0
| | | | | | | | | | | | | | | | | | | | The MPC852 based mgsuvd and kmsupx4 boards from keymile were initially ported but later on not developed further. So the respective files were removed to avoid unneeded merging and maintenance. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher<hs@denx.de>
| * powerpc/85xx: Add support for booting from NAND on MPC8572DSKumar Gala2011-01-141-0/+1
| | | | | | | | | | | | | | | | Mimic support that exists on MPC8536DS on the MPC8572DS to allow booting from NAND. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Remove support for PM854/PM856 boardsKumar Gala2011-01-141-2/+0
| | | | | | | | | | | | | | | | The PM854/PM856 boards are no longer maintained and thus we are removing support for them. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
| * powerpc/85xx: Removed support for MPC8540EVAL boardKumar Gala2011-01-141-5/+0
| | | | | | | | | | | | | | The MPC8540EVAL board is no longer maintained and thus we are removing support for it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Removed support for ATUM8548 boardKumar Gala2011-01-141-1/+0
| | | | | | | | | | | | | | The ATUM8548 board is no longer maintained and thus we are removing support for it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * sh: Add support shmin boardNobuhiro Iwamatsu2011-01-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | This adds support for the SHMIN SH7706 board(T-SH7706LAN). The CPU of this board is SH7706. There are SDRAM of 32M byte, Flash memory of 512K byte, Serial, 10Base Ether and MMC. http://web.kyoto-inet.or.jp/people/takagaki/T-SH7706/T-SH7706.htm Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * xilinx-ppc4xx-generic: Use common u-boot.ldsRicardo Ribalda Delgado2010-12-171-10/+10
| | | | | | | | | | | | | | Use common ppc4xx linker script for xilinx ppc440 and ppc405 related boards. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * Armada100: Add Board Support for Marvell Aspenite-DBPrafulla Wadaskar2010-12-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aspenite is a Development Board for ASPEN/ARMADA168(88AP168) with * Processor upto 1.2GHz * Parallel 1Gb x8 DDR2-1066 MHz * 16 Mb x16 NOR, 4Gb x8 SLC NAND, footprint for SPI NOR * Footprints for eMMC/eSD NAND & MMC x8 card * 4-in-1 card reader (xD, MMC/SD/MS Pro), CF True IDE socket * SEAF memory board, subset of PISMO2 With Peripherals: * 4.3” WVGA 24-bit LCD * Audio codecs (AC97 & I2S), TSI * VGA camera * Video in via 3 RCA jacks, and HDMI type C out * Marvell 88W8688 802.11bg/BT module * GPS RF IC * Dual analog mics & speakers, headset jack, LED, ambient light sensor * USB2.0 HS host (A), OTG (micro AB) * FE PHY, PCIE Mini Card slot * GPIO, GPIO expander with DIP switches for easier selection UART serial over USB, CIR This patch adds basic board support with DRAM and UART functionality The patch is tested for boot from DRAM using XDB Signed-off-by: Mahavir Jain <mjain@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * Merge branch 'master' of ../master into nextWolfgang Denk2010-12-161-4/+7
| |\
| * | mpc52xx: add support for tqm52xx based board charonHeiko Schocher2010-12-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - serial console in PSC1 - 128MiB DRAM - 32MiB Flash - FEC Ethernet - 2 I2C busses - FPGA on CS3 - IDE - VGA SMI501 Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | Davinci: add support for the ea20 boardStefano Babic2010-11-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board uses the OMAP-L138 SOM stacked on a custom baseboard. It supports SPI Flash, Ethernet with RMII. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | Add board support for hawkboardSughosh Ganu2010-11-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds basic board support for TI's OMAP-L138 based Hawkboard. This board is pretty similar to the da850 EVM. Support for nand and network access is added in this version. The following bootup procedure is used. At reset, the Rom Boot Loader(RBL), initialises the ddr and the nand controllers and copies the second stage bootloader(nand_spl) to RAM. The secondary bootloader then copies u-boot from a predefined location in the nand flash to the RAM, and passes control to the u-boot image. Three config options are supported * hawkboard_config - Used to create the u-boot.bin. Tftp the u-boot.bin image to the RAM from u-boot, and flash to the nand flash at address 0xe0000. * hawkboard_nand_config - Used to generate the secondary bootloader(nand_spl) image. This creates an elf file u-boot-spl under nand_spl/. Create an AIS signed image using this file, and flash it to the nand flash at address 0x20000. The ais file should fit in one block. * hawkboard_uart_config - This is same as the first image, but with the TEXT_BASE as expected by the RBL(0xc1080000). Create the AIS Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | | fixed some issues with different versions; select I2C1 for halt commandH. Nikolaus Schaller2011-01-171-0/+1
| | |
* | | Merge branch 'master' of git://git.denx.de/u-boot into gta04eH. Nikolaus Schaller2010-12-181-4/+7
|\ \ \ | | |/ | |/|
| * | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-12-081-1/+4
| |\ \
| | * | at91rm9200ek: add configure target for RAM bootAndreas Bießmann2010-12-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch also removes now unnecessary config.mk in board directory and make usage of new features in boards.cfg. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| | * | AT91: add TOP9000 supportReinhard Meyer2010-12-071-0/+2
| | |/ | | | | | | | | | | | | | | | | | | Adds support for the EMK TOP9000 CPU Module which is based on ATMELs ARM926EJS AT91SAM9XE SoC. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * | 83xx NAND boot: fix boards.cfgScott Wood2010-12-061-3/+3
| |/ | | | | | | | | | | | | | | | | | | This patch http://patchwork.ozlabs.org/patch/72962/ included a boards.cfg change, but it was omitted when applied as f1c574d4006d81301792e70fafc31ff39259e793 This fixes the NAND SPL build on MPC8315ERDB. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | merge with denx masterH. Nikolaus Schaller2010-12-081-727/+731
|\ \ | |/
| * sort and reformat boards.cfgEric Cooper2010-11-271-721/+728
| | | | | | | | | | | | | | update suggested sort command in comment to produce desired order suggest use of "column -t" to reformat Signed-off-by: Eric Cooper <ecc@cmu.edu>
| * barco: drop unsupported board configurationWolfgang Denk2010-11-261-1/+0
| | | | | | | | | | | | | | | | | | | | The barco board appears to be unmaintained since it was added about 5 years ago. The environment location has probably never been correct. Drop it. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Marc Leeman <marc.leeman@barco.com> Acked-by: Stefan Roese <sr@denx.de>
| * ERIC: drop unsupported board configurationWolfgang Denk2010-11-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | The ERIC board appears to be unmaintained for more than 9 years. The environment location has probably never been correct, and has been definitely broken since for at least a year. Drop it. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Swen Anderson <sand@peppercon.de> Acked-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot into gta04eH. Nikolaus Schaller2010-11-271-10/+11
|\ \ | |/
| * Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2010-11-261-0/+1
| |\
| | * Seagate FreeAgent DockStar supportEric Cooper2010-11-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | start with sheevaplug configuration add modifications by Alexander Holler <holler@ahsoftware.de> change RAM definitions to one bank (128 MB) change ident string and prompt define MTD partitions and default environment variables add support for LEDs Signed-off-by: Eric Cooper <ecc@cmu.edu>
generated by cgit v1.1 at 2024-10-31 18:26:55 +0000