From 3df518cf99af7c41a44f88bfd13df825a667ac23 Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <hns@goldelico.com>
Date: Fri, 25 Jan 2013 10:06:25 +0100
Subject: added code to "systest wlan" command to test if U1102 works

---
 boot-scr/boot.txt                      | 14 +++++++-------
 u-boot/board/goldelico/gta04/systest.c | 33 +++++++++++++++++++++++++++++++--
 u-boot/include/configs/omap3_beagle.h  |  2 +-
 3 files changed, 39 insertions(+), 10 deletions(-)

diff --git a/boot-scr/boot.txt b/boot-scr/boot.txt
index 3c5fd88..0d876bf 100644
--- a/boot-scr/boot.txt
+++ b/boot-scr/boot.txt
@@ -119,13 +119,13 @@ if test "x${gta04}" != "x${VERSION}"
 #   then
 #     if load mmc 0:${p} ${loadaddr} uImage
 #     then
-#       echo found kernel on FAT partition $p
+#       echo found kernel /uImage on partition $p
 #       run mmcargs	# start with default mmc args
 #       KERNEL=1
 #       DONE=1
 #     elif load mmc 0:${p} ${loadaddr} /boot/uImage
 #     then
-#       echo found kernel on EXT partition $p
+#       echo found kernel /boot/uImage on partition $p
 #       setenv mmcroot "/dev/mmcblk0p${p} rw"
 #       run mmcargs	# start with default mmc args
 #       KERNEL=1
@@ -315,7 +315,7 @@ then
 
 				status set 10
 				i2c dev 0
-				if load mmc 0 0x80200000 x-load.flash
+				if fatload mmc 0 0x80200000 x-load.flash
 				then
 					status set 18
 					echo *** flashing Xloader ***
@@ -333,7 +333,7 @@ then
 				status set 10
 				# the official u-boot partition goes from 0x80000 to 0x27ffff i.e. 2 MByte
 				
-				if load mmc 0 0x80300000 u-boot.flash
+				if fatload mmc 0 0x80300000 u-boot.flash
 				then
 					echo *** flashing U-Boot ***
 					status set 18
@@ -348,7 +348,7 @@ then
 					# since u-boot is approx 260 kByte
 
 					status set 10
-					if load mmc 0 0x80300000 splash.rgb16z
+					if fatload mmc 0 0x80300000 splash.rgb16z
 						then
 						echo *** flashing splash ***
 						status set 18
@@ -358,7 +358,7 @@ then
 					fi
 
 					status set 10
-					if load mmc 0 0x80300000 menu.rgb16z
+					if fatload mmc 0 0x80300000 menu.rgb16z
 						then
 						echo *** flashing menu ***
 						status set 18
@@ -368,7 +368,7 @@ then
 					fi
 
 					status set 10
-					if load mmc 0 0x80300000 boot.scr
+					if fatload mmc 0 0x80300000 boot.scr
 						then
 						echo *** flashing boot.scr ***
 						status set 18
diff --git a/u-boot/board/goldelico/gta04/systest.c b/u-boot/board/goldelico/gta04/systest.c
index 590d70f..7c34101 100644
--- a/u-boot/board/goldelico/gta04/systest.c
+++ b/u-boot/board/goldelico/gta04/systest.c
@@ -585,11 +585,40 @@ int wlanbtpower(void)
 int wlanbttest(int test)
 { /* Bluetooth VAUX4 = 3.3V -- CHECKME: 3.3 V is not officially supported! We use 0x09 = 2.8V here*/
 #ifdef CONFIG_OMAP3_GTA04
+	int ret=0;
 	wlanbtpower();
 	if(test)
 		{
+		int i;
 		// now, we should be able to test the UART for the BT part...
-		return !bt_hci(1);
+		ret |= !bt_hci(1);
+		/* test if U1102 (SN74AVCA604LZYX is feeding back the clock */
+		omap_request_gpio(130);
+		omap_request_gpio(139);
+		omap_set_gpio_direction(130, 1);	// output
+		omap_set_gpio_direction(139, 1);	// input
+		writew((IDIS | PTD | DIS | M4), OMAP34XX_CTRL_BASE + CP(MMC2_CLK));	// make output GPIO
+		writew((IEN  | PTD | DIS | M4), OMAP34XX_CTRL_BASE + CP(MMC2_DAT7));	// make input GPIO w/o pullup/down
+		for(i=0; i<8; i++)
+			{
+			int val;
+			udelay(100);
+			omap_set_gpio_dataout(130, i%2); // set clock output
+			udelay(300);
+			val=omap_get_gpio_datain(139);	// read clock feedback
+			if(i%2 == 0)
+				{
+				if(val)
+					printf("clock 0 --> feedback 1\n");
+				}
+			else
+				{
+				if(!val)
+					printf("clock 1 --> feedback 0\n");
+				}
+			}
+		writew((IDIS | PTD | DIS | M0), OMAP34XX_CTRL_BASE + CP(MMC2_CLK));		// switch back to MMC clock out mode
+		writew((IEN  | PTD | DIS | M1), OMAP34XX_CTRL_BASE + CP(MMC2_DAT7));	// switch back to MMC clock in mode		
 		}
 	return 0;
 #else
@@ -724,7 +753,7 @@ static struct
 	{ 136, 0, "MMC2_DIR_DAT0", CP(MMC2_DAT4) },
 	{ 137, 0, "MMC2_DIR_DAT1", CP(MMC2_DAT5) },
 	{ 138, 0, "MMC2_DIR_CMD", CP(MMC2_DAT6) },
-	{ 139, 0, "MMC2_DIR_CLKIN", CP(MMC2_DAT7) },	
+	{ 139, 0, "MMC2_DIR_CLKIN", CP(MMC2_DAT7) },	// if U1102 works, this should follow GPIO130
 	{ 140, 0, "BT_DX", CP(MCBSP3_DX) },
 	{ 141, 0, "BT_DR", CP(MCBSP3_DR) },
 	{ 142, 0, "BT_CLKX", CP(MCBSP3_CLKX) },
diff --git a/u-boot/include/configs/omap3_beagle.h b/u-boot/include/configs/omap3_beagle.h
index 9866d49..519da79 100644
--- a/u-boot/include/configs/omap3_beagle.h
+++ b/u-boot/include/configs/omap3_beagle.h
@@ -322,7 +322,7 @@
 #define CONFIG_ENV_OFFSET		boot_flash_off
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
-//#define CONFIG_START_WITH_DEFAULT_ENVIRONMENT 1
+#define CONFIG_START_WITH_DEFAULT_ENVIRONMENT 1
 
 #ifndef __ASSEMBLY__
 extern unsigned int boot_flash_base;
-- 
cgit v1.1