From 6f8c85e8d1865730c158d9ef5a06c70c3a10600a Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Wed, 26 Mar 2008 22:56:36 +0800 Subject: mpc83xx: initialize serdes for MPC837xEMDS boards This patch is stolen from Anton Vorontsov's patch for mpc837xerdb boards. The reference clk and xcorevdd voltage of serdes1/2 is same between mpc837xemds and mpc837xerdb. 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE 8379E: LYNX1- 2 SATA LYNX2- 2 SATA Signed-off-by: Dave Liu Signed-off-by: Kim Phillips --- board/freescale/mpc837xemds/mpc837xemds.c | 33 +++++++++++++++++++++++++++++++ include/configs/MPC837XEMDS.h | 5 +++++ 2 files changed, 38 insertions(+) diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index e57a53f..6fbd0e0 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -12,6 +12,8 @@ #include #include +#include +#include #include #if defined(CONFIG_OF_LIBFDT) #include @@ -29,6 +31,37 @@ int board_early_init_f(void) /* Clear all of the interrupt of BCSR */ bcsr[0xe] = 0xff; +#ifdef CONFIG_FSL_SERDES + immap_t *immr = (immap_t *)CFG_IMMR; + u32 spridr = in_be32(&immr->sysconf.spridr); + + /* we check only part num, and don't look for CPU revisions */ + switch (spridr >> 16) { + case SPR_8379E_REV10 >> 16: + case SPR_8379_REV10 >> 16: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + case SPR_8378E_REV10 >> 16: + case SPR_8378_REV10 >> 16: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + case SPR_8377E_REV10 >> 16: + case SPR_8377_REV10 >> 16: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + default: + printf("serdes not configured: unknown CPU part number: " + "%04x\n", spridr >> 16); + break; + } +#endif /* CONFIG_FSL_SERDES */ return 0; } diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index b307bf7..4006026 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -389,6 +389,11 @@ /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC1" +/* SERDES */ +#define CONFIG_FSL_SERDES +#define CONFIG_FSL_SERDES1 0xe3000 +#define CONFIG_FSL_SERDES2 0xe3100 + /* * Environment */ -- cgit v1.1 From 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Wed, 26 Mar 2008 22:57:19 +0800 Subject: mpc83xx: enable the SATA interface on mpc837xemds board Enable the first two SATA interfaces on MPC837xEMDS board, The two SATA ports are on LYNX1. (SATA0/1 on J4/5) Signed-off-by: Dave Liu Signed-off-by: Kim Phillips --- include/configs/MPC837XEMDS.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 4006026..7c4e76e 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -395,6 +395,29 @@ #define CONFIG_FSL_SERDES2 0xe3100 /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT -- cgit v1.1 From 730e792926ca3fe4dd1b734a3bf44e55afa6f536 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 28 Mar 2008 14:31:23 -0500 Subject: mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards Signed-off-by: Kim Phillips --- include/configs/MPC8315ERDB.h | 23 +++++++++++++++++++++++ include/configs/MPC837XERDB.h | 23 +++++++++++++++++++++++ 2 files changed, 46 insertions(+) diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index af78726..432fb31 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -349,6 +349,29 @@ #define CONFIG_ETHPRIME "eTSEC1" /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 90812e9..eaac525 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -416,6 +416,29 @@ #endif /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT -- cgit v1.1 From 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 28 Mar 2008 10:18:40 -0500 Subject: mpc83xx: unreinvent mem_clk delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to mem_*_clk for consistency's sake. Signed-off-by: Kim Phillips --- cpu/mpc83xx/spd_sdram.c | 10 +++++----- cpu/mpc83xx/speed.c | 16 ++++++++-------- include/asm-ppc/global_data.h | 3 +-- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 0acca47..c9151d7 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -78,12 +78,12 @@ extern int dma_xfer(void *dest, uint count, void *src); int picos_to_clk(int picos) { - unsigned int ddr_bus_clk; + unsigned int mem_bus_clk; int clks; - ddr_bus_clk = gd->ddr_clk >> 1; - clks = picos / (1000000000 / (ddr_bus_clk / 1000)); - if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0) + mem_bus_clk = gd->mem_clk >> 1; + clks = picos / (1000000000 / (mem_bus_clk / 1000)); + if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0) clks++; return clks; @@ -313,7 +313,7 @@ long int spd_sdram() debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate); - ddrc_clk = gd->ddr_clk / 1000000; + ddrc_clk = gd->mem_clk / 1000000; effective_data_rate = 0; if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */ diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index f598699..16145dd 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -122,9 +122,9 @@ int get_clocks(void) u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; - u32 ddr_clk; + u32 mem_clk; #if defined(CONFIG_MPC8360) - u32 ddr_sec_clk; + u32 mem_sec_clk; #endif #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) u32 qepmf; @@ -400,11 +400,11 @@ int get_clocks(void) return -12; } - ddr_clk = csb_clk * + mem_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT)); corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT; #if defined(CONFIG_MPC8360) - ddr_sec_clk = csb_clk * (1 + + mem_sec_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); #endif @@ -466,9 +466,9 @@ int get_clocks(void) gd->enc_clk = enc_clk; gd->lbiu_clk = lbiu_clk; gd->lclk_clk = lclk_clk; - gd->ddr_clk = ddr_clk; + gd->mem_clk = mem_clk; #if defined(CONFIG_MPC8360) - gd->ddr_sec_clk = ddr_sec_clk; + gd->mem_sec_clk = mem_sec_clk; #endif #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) gd->qe_clk = qe_clk; @@ -508,9 +508,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #endif printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000); printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000); - printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000); + printf(" DDR: %4d MHz\n", gd->mem_clk / 1000000); #if defined(CONFIG_MPC8360) - printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000); + printf(" DDR Secondary: %4d MHz\n", gd->mem_sec_clk / 1000000); #endif printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000); printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000); diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index b43dba3..9ccf7d6 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -74,7 +74,6 @@ typedef struct global_data { u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; - u32 ddr_clk; u32 pci_clk; #if defined(CONFIG_MPC837X) u32 pciexp1_clk; @@ -84,7 +83,7 @@ typedef struct global_data { u32 sata_clk; #endif #if defined(CONFIG_MPC8360) - u32 ddr_sec_clk; + u32 mem_sec_clk; #endif /* CONFIG_MPC8360 */ #endif #if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) -- cgit v1.1 From 81fd52c6c8fd19f0b7856b98217ce37c46c521af Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 28 Mar 2008 10:18:53 -0500 Subject: mpc83xx: display ddr frequency in board_add_ram_info banner Signed-off-by: Kim Phillips --- cpu/mpc83xx/spd_sdram.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index c9151d7..97ac7bb 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -34,10 +34,13 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + void board_add_ram_info(int use_default) { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; + char buf[32]; printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); @@ -48,9 +51,11 @@ void board_add_ram_info(int use_default) puts(", 64-bit"); if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) - puts(", ECC on)"); + puts(", ECC on"); else - puts(", ECC off)"); + puts(", ECC off"); + + printf(", %s MHz)", strmhz(buf, gd->mem_clk)); #if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE) puts("\nSDRAM: "); @@ -60,8 +65,6 @@ void board_add_ram_info(int use_default) #ifdef CONFIG_SPD_EEPROM -DECLARE_GLOBAL_DATA_PTR; - #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void dma_init(void); extern uint dma_check(void); -- cgit v1.1 From e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 28 Mar 2008 10:19:07 -0500 Subject: mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing and processor ID display. Add REVID_{MAJ,MIN}OR macros to make REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR convenience macros. Signed-off-by: Kim Phillips --- board/freescale/mpc8360emds/mpc8360emds.c | 11 +- board/freescale/mpc837xemds/mpc837xemds.c | 15 ++- board/freescale/mpc837xerdb/mpc837xerdb.c | 15 ++- cpu/mpc83xx/cpu.c | 166 ++++++++---------------------- include/mpc83xx.h | 95 ++++++----------- 5 files changed, 89 insertions(+), 213 deletions(-) diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index d90cdb3..2119320 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -98,11 +98,8 @@ int board_early_init_f(void) /* Enable flash write */ bcsr[0xa] &= ~0x04; - /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */ - if (immr->sysconf.spridr == SPR_8360_REV20 || - immr->sysconf.spridr == SPR_8360E_REV20 || - immr->sysconf.spridr == SPR_8360_REV21 || - immr->sysconf.spridr == SPR_8360E_REV21) + /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */ + if (REVID_MAJOR(immr->sysconf.spridr) == 2) bcsr[0xe] = 0x30; /* Enable second UART */ @@ -308,8 +305,8 @@ void ft_board_setup(void *blob, bd_t *bd) * if on mpc8360ea rev. 2.1, * change both ucc phy-connection-types from rgmii-id to rgmii-rxid */ - if (immr->sysconf.spridr == SPR_8360_REV21 || - immr->sysconf.spridr == SPR_8360E_REV21) { + if ((REVID_MAJOR(immr->sysconf.spridr) == 2) && + (REVID_MINOR(immr->sysconf.spridr) == 1)) { int nodeoffset; const char *prop; int path; diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index 6fbd0e0..f7cd5fe 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -36,24 +36,21 @@ int board_early_init_f(void) u32 spridr = in_be32(&immr->sysconf.spridr); /* we check only part num, and don't look for CPU revisions */ - switch (spridr >> 16) { - case SPR_8379E_REV10 >> 16: - case SPR_8379_REV10 >> 16: + switch (spridr) { + case SPR_8377: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; - case SPR_8378E_REV10 >> 16: - case SPR_8378_REV10 >> 16: + case SPR_8378: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; - case SPR_8377E_REV10 >> 16: - case SPR_8377_REV10 >> 16: + case SPR_8379: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; default: diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 83fb60d..e054f4e 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -140,24 +140,21 @@ int board_early_init_f(void) u32 spridr = in_be32(&immr->sysconf.spridr); /* we check only part num, and don't look for CPU revisions */ - switch (spridr >> 16) { - case SPR_8379E_REV10 >> 16: - case SPR_8379_REV10 >> 16: + switch (PARTID_NO_E(spridr)) { + case SPR_8377: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; - case SPR_8378E_REV10 >> 16: - case SPR_8378_REV10 >> 16: + case SPR_8378: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; - case SPR_8377E_REV10 >> 16: - case SPR_8377_REV10 >> 16: + case SPR_8379: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; default: diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index bff3cef..36de78d 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -42,6 +42,30 @@ int checkcpu(void) u32 pvr = get_pvr(); u32 spridr; char buf[32]; + int i; + +#define CPU_TYPE_ENTRY(x) {#x, SPR_##x} + const struct cpu_type { + char name[15]; + u32 partid; + } cpu_type_list [] = { + CPU_TYPE_ENTRY(8311), + CPU_TYPE_ENTRY(8313), + CPU_TYPE_ENTRY(8314), + CPU_TYPE_ENTRY(8315), + CPU_TYPE_ENTRY(8321), + CPU_TYPE_ENTRY(8323), + CPU_TYPE_ENTRY(8343), + CPU_TYPE_ENTRY(8347_TBGA_), + CPU_TYPE_ENTRY(8347_PBGA_), + CPU_TYPE_ENTRY(8349), + CPU_TYPE_ENTRY(8358_TBGA_), + CPU_TYPE_ENTRY(8358_PBGA_), + CPU_TYPE_ENTRY(8360), + CPU_TYPE_ENTRY(8377), + CPU_TYPE_ENTRY(8378), + CPU_TYPE_ENTRY(8379), + }; immr = (immap_t *)CFG_IMMR; @@ -69,130 +93,26 @@ int checkcpu(void) } spridr = immr->sysconf.spridr; - switch(spridr) { - case SPR_8349E_REV10: - case SPR_8349E_REV11: - case SPR_8349E_REV31: - puts("MPC8349E, "); - break; - case SPR_8349_REV10: - case SPR_8349_REV11: - case SPR_8349_REV31: - puts("MPC8349, "); - break; - case SPR_8347E_REV10_TBGA: - case SPR_8347E_REV11_TBGA: - case SPR_8347E_REV31_TBGA: - case SPR_8347E_REV10_PBGA: - case SPR_8347E_REV11_PBGA: - case SPR_8347E_REV31_PBGA: - puts("MPC8347E, "); - break; - case SPR_8347_REV10_TBGA: - case SPR_8347_REV11_TBGA: - case SPR_8347_REV31_TBGA: - case SPR_8347_REV10_PBGA: - case SPR_8347_REV11_PBGA: - case SPR_8347_REV31_PBGA: - puts("MPC8347, "); - break; - case SPR_8343E_REV10: - case SPR_8343E_REV11: - case SPR_8343E_REV31: - puts("MPC8343E, "); - break; - case SPR_8343_REV10: - case SPR_8343_REV11: - case SPR_8343_REV31: - puts("MPC8343, "); - break; - case SPR_8360E_REV10: - case SPR_8360E_REV11: - case SPR_8360E_REV12: - case SPR_8360E_REV20: - case SPR_8360E_REV21: - puts("MPC8360E, "); - break; - case SPR_8360_REV10: - case SPR_8360_REV11: - case SPR_8360_REV12: - case SPR_8360_REV20: - case SPR_8360_REV21: - puts("MPC8360, "); - break; - case SPR_8323E_REV10: - case SPR_8323E_REV11: - puts("MPC8323E, "); - break; - case SPR_8323_REV10: - case SPR_8323_REV11: - puts("MPC8323, "); - break; - case SPR_8321E_REV10: - case SPR_8321E_REV11: - puts("MPC8321E, "); - break; - case SPR_8321_REV10: - case SPR_8321_REV11: - puts("MPC8321, "); - break; - case SPR_8311_REV10: - puts("MPC8311, "); - break; - case SPR_8311E_REV10: - puts("MPC8311E, "); - break; - case SPR_8313_REV10: - puts("MPC8313, "); - break; - case SPR_8313E_REV10: - puts("MPC8313E, "); - break; - case SPR_8315E_REV10: - puts("MPC8315E, "); - break; - case SPR_8315_REV10: - puts("MPC8315, "); - break; - case SPR_8314E_REV10: - puts("MPC8314E, "); - break; - case SPR_8314_REV10: - puts("MPC8314, "); - break; - case SPR_8379E_REV10: - puts("MPC8379E, "); - break; - case SPR_8379_REV10: - puts("MPC8379, "); - break; - case SPR_8378E_REV10: - puts("MPC8378E, "); - break; - case SPR_8378_REV10: - puts("MPC8378, "); - break; - case SPR_8377E_REV10: - puts("MPC8377E, "); - break; - case SPR_8377_REV10: - puts("MPC8377, "); - break; - default: - printf("Rev: Unknown revision number:%08x\n" - "Warning: Unsupported cpu revision!\n",spridr); - return 0; - } -#if defined(CONFIG_MPC834X) - /* Multiple revisons of 834x processors may have the same SPRIDR value. - * So use PVR to identify the revision number. - */ - printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock)); -#else - printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock)); -#endif - printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000); + for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) + if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) { + puts("MPC"); + puts(cpu_type_list[i].name); + if (IS_E_PROCESSOR(spridr)) + puts("E"); + if (REVID_MAJOR(spridr) >= 2) + puts("A"); + printf(", Rev: %d.%d", REVID_MAJOR(spridr), + REVID_MINOR(spridr)); + break; + } + + if (i == ARRAY_SIZE(cpu_type_list)) + printf("(SPRIDR %08x unknown), ", spridr); + + printf(" at %s MHz, ", strmhz(buf, clock)); + + printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk)); return 0; } diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 4ee38aa..d2e1e2b 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -48,71 +48,36 @@ /* SPRIDR - System Part and Revision ID Register */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ - -#define SPR_8349E_REV10 0x80300100 -#define SPR_8349_REV10 0x80310100 -#define SPR_8347E_REV10_TBGA 0x80320100 -#define SPR_8347_REV10_TBGA 0x80330100 -#define SPR_8347E_REV10_PBGA 0x80340100 -#define SPR_8347_REV10_PBGA 0x80350100 -#define SPR_8343E_REV10 0x80360100 -#define SPR_8343_REV10 0x80370100 - -#define SPR_8349E_REV11 0x80300101 -#define SPR_8349_REV11 0x80310101 -#define SPR_8347E_REV11_TBGA 0x80320101 -#define SPR_8347_REV11_TBGA 0x80330101 -#define SPR_8347E_REV11_PBGA 0x80340101 -#define SPR_8347_REV11_PBGA 0x80350101 -#define SPR_8343E_REV11 0x80360101 -#define SPR_8343_REV11 0x80370101 - -#define SPR_8349E_REV31 0x80300300 -#define SPR_8349_REV31 0x80310300 -#define SPR_8347E_REV31_TBGA 0x80320300 -#define SPR_8347_REV31_TBGA 0x80330300 -#define SPR_8347E_REV31_PBGA 0x80340300 -#define SPR_8347_REV31_PBGA 0x80350300 -#define SPR_8343E_REV31 0x80360300 -#define SPR_8343_REV31 0x80370300 - -#define SPR_8360E_REV10 0x80480010 -#define SPR_8360_REV10 0x80490010 -#define SPR_8360E_REV11 0x80480011 -#define SPR_8360_REV11 0x80490011 -#define SPR_8360E_REV12 0x80480012 -#define SPR_8360_REV12 0x80490012 -#define SPR_8360E_REV20 0x80480020 -#define SPR_8360_REV20 0x80490020 -#define SPR_8360E_REV21 0x80480021 -#define SPR_8360_REV21 0x80490021 - -#define SPR_8323E_REV10 0x80620010 -#define SPR_8323_REV10 0x80630010 -#define SPR_8321E_REV10 0x80660010 -#define SPR_8321_REV10 0x80670010 -#define SPR_8323E_REV11 0x80620011 -#define SPR_8323_REV11 0x80630011 -#define SPR_8321E_REV11 0x80660011 -#define SPR_8321_REV11 0x80670011 - -#define SPR_8313E_REV10 0x80B00010 -#define SPR_8313_REV10 0x80B10010 -#define SPR_8311E_REV10 0x80B20010 -#define SPR_8311_REV10 0x80B30010 -#define SPR_8315E_REV10 0x80B40010 -#define SPR_8315_REV10 0x80B50010 -#define SPR_8314E_REV10 0x80B60010 -#define SPR_8314_REV10 0x80B70010 - -#define SPR_8379E_REV10 0x80C20010 -#define SPR_8379_REV10 0x80C30010 -#define SPR_8378E_REV10 0x80C40010 -#define SPR_8378_REV10 0x80C50010 -#define SPR_8377E_REV10 0x80C60010 -#define SPR_8377_REV10 0x80C70010 +#define SPRIDR_PARTID 0xFFFF0000 /* Part Id */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Id */ + +#if defined(CONFIG_MPC834X) +#define REVID_MAJOR(spridr) ((spridr & 0x0000FF00) >> 8) +#define REVID_MINOR(spridr) (spridr & 0x000000FF) +#else +#define REVID_MAJOR(spridr) ((spridr & 0x000000F0) >> 4) +#define REVID_MINOR(spridr) (spridr & 0x0000000F) +#endif + +#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16) +#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */ + +#define SPR_8311 0x80B2 +#define SPR_8313 0x80B0 +#define SPR_8314 0x80B6 +#define SPR_8315 0x80B4 +#define SPR_8321 0x8066 +#define SPR_8323 0x8062 +#define SPR_8343 0x8036 +#define SPR_8347_TBGA_ 0x8032 +#define SPR_8347_PBGA_ 0x8034 +#define SPR_8349 0x8030 +#define SPR_8358_TBGA_ 0x804A +#define SPR_8358_PBGA_ 0x804E +#define SPR_8360 0x8048 +#define SPR_8377 0x80C6 +#define SPR_8378 0x80C4 +#define SPR_8379 0x80C2 /* SPCR - System Priority Configuration Register */ -- cgit v1.1 From 8f325cff31f6e745e6540014b131b9a97f61944c Mon Sep 17 00:00:00 2001 From: Michael Barkowski Date: Fri, 28 Mar 2008 15:15:38 -0400 Subject: mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB controller on the PCI bus in Linux on the MPC8323ERDB. This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's config file. Signed-off-by: Michael Barkowski Signed-off-by: Kim Phillips --- include/configs/MPC8323ERDB.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 94c4c6b..65f829d 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -341,7 +341,7 @@ #define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */ #ifdef CONFIG_PCI - +#define CONFIG_PCI_SKIP_HOST_BRIDGE #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -- cgit v1.1 From 5b2793a3f3de34d439232b05acc8af67a028fd35 Mon Sep 17 00:00:00 2001 From: Michael Barkowski Date: Thu, 27 Mar 2008 14:34:43 -0400 Subject: mpc8323erdb: fix EEPROM page size and get MAC from EEPROM This patch fixes eeprom page size so that you can now write more than 64 bytes at a time. It also makes the board take MAC addresses, if found, from EEPROM. User should place up to 4 addresses at offset 0x7f00, for eth{,1,2,3}addr. Any unused addresses should be zero. This group of four six-byte values should have it's CRC at the end. crc32 and eeprom commands can be used to accomplish this. If CRC fails, MAC addresses come from the environment. If CRC succeeds, the environment is overwritten at startup. Signed-off-by: Michael Barkowski Signed-off-by: Kim Phillips --- board/freescale/mpc8323erdb/mpc8323erdb.c | 34 +++++++++++++++++++++++++++++++ include/configs/MPC8323ERDB.h | 10 +++++++-- lib_ppc/board.c | 2 +- 3 files changed, 43 insertions(+), 3 deletions(-) diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 88d5e8f..afc0eee 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -185,3 +185,37 @@ void ft_board_setup(void *blob, bd_t *bd) #endif } #endif + +#if defined(CFG_I2C_MAC_OFFSET) +int mac_read_from_eeprom(void) +{ + uchar buf[28]; + char str[18]; + int i = 0; + unsigned int crc = 0; + unsigned char enetvar[32]; + + /* Read MAC addresses from EEPROM */ + if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) { + printf("\nEEPROM @ 0x%02x read FAILED!!!\n", + CFG_I2C_EEPROM_ADDR); + } else { + if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) { + printf("Reading MAC from EEPROM\n"); + for (i = 0; i < 4; i++) { + if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) { + sprintf(str, + "%02X:%02X:%02X:%02X:%02X:%02X", + buf[i * 6], buf[i * 6 + 1], + buf[i * 6 + 2], buf[i * 6 + 3], + buf[i * 6 + 4], buf[i * 6 + 5]); + sprintf((char *)enetvar, + i ? "eth%daddr" : "ethaddr", i); + setenv((char *)enetvar, str); + } + } + } + } + return 0; +} +#endif /* CONFIG_I2C_MAC_OFFSET */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 65f829d..92d7aa4 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -323,8 +323,11 @@ /* * Config on-board EEPROM */ -#define CFG_I2C_EEPROM_ADDR 0x50 -#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE /* * General PCI @@ -549,6 +552,9 @@ #define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ #define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 +/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CFG_I2C_MAC_OFFSET 0x7f00 /* MAC address offset in I2C EEPROM */ + #define CONFIG_IPADDR 10.0.0.2 #define CONFIG_SERVERIP 10.0.0.1 #define CONFIG_GATEWAYIP 10.0.0.1 diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 3038302..50cdf8c 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -876,7 +876,7 @@ void board_init_r (gd_t *id, ulong dest_addr) sc3_read_eeprom(); #endif -#ifdef CFG_ID_EEPROM +#if defined (CFG_ID_EEPROM) || defined (CFG_I2C_MAC_OFFSET) mac_read_from_eeprom(); #endif -- cgit v1.1 From 70431e8a7393b6b793f77957f95b999fc9a269b8 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Fri, 28 Mar 2008 15:41:25 +0100 Subject: Make MPC83xx one step closer to full relocation. Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx and use GOT relative reference. Signed-off-by: Joakim Tjernlund Signed-off-by: Kim Phillips --- cpu/mpc83xx/start.S | 11 +++++++---- lib_ppc/board.c | 3 ++- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 309eb30..fdf9d35 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -172,8 +172,11 @@ boot_warm: /* time t 5 */ /* there and deflate the flash size back to minimal size */ /*------------------------------------------------------------*/ bl map_flash_by_law1 - lis r4, (CFG_MONITOR_BASE)@h - ori r4, r4, (CFG_MONITOR_BASE)@l + + GET_GOT /* initialize GOT access */ + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET + addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET mtlr r5 blr @@ -872,8 +875,8 @@ relocate_code: mr r10, r5 /* Save copy of Destination Address */ mr r3, r5 /* Destination Address */ - lis r4, CFG_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CFG_MONITOR_BASE@l + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 50cdf8c..7ebf74a 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -120,6 +120,7 @@ DECLARE_GLOBAL_DATA_PTR; #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN #endif +extern ulong _start; extern ulong __init_end; extern ulong _end; ulong monitor_flash_len; @@ -434,7 +435,7 @@ void board_init_f (ulong bootflag) * - monitor code * - board info struct */ - len = (ulong)&_end - CFG_MONITOR_BASE; + len = (ulong)&_end - (ulong)&_start + EXC_OFF_SYS_RESET; #ifndef CONFIG_MAX_MEM_MAPPED #define CONFIG_MAX_MEM_MAPPED (256 << 20) -- cgit v1.1