From 84ad688473bec2875e171b71040eb9e033c6c206 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 12 Apr 2010 22:28:11 -0500 Subject: arm: Move cpu/$CPU to arch/arm/cpu/$CPU Signed-off-by: Peter Tyser --- arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c | 1347 +++++++++++++++++++++++++++++++ 1 file changed, 1347 insertions(+) create mode 100644 arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c (limited to 'arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c') diff --git a/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c b/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c new file mode 100644 index 0000000..09f69ce --- /dev/null +++ b/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c @@ -0,0 +1,1347 @@ +/** + * @file IxQMgrDispatcher.c + * + * @author Intel Corporation + * @date 20-Dec-2001 + * + * @brief This file contains the implementation of the Dispatcher sub component + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * User defined include files. + */ +#include "IxQMgr.h" +#include "IxQMgrAqmIf_p.h" +#include "IxQMgrQCfg_p.h" +#include "IxQMgrDispatcher_p.h" +#include "IxQMgrLog_p.h" +#include "IxQMgrDefines_p.h" +#include "IxFeatureCtrl.h" +#include "IxOsal.h" + + + +/* + * #defines and macros used in this file. + */ + + +/* + * This constant is used to indicate the number of priority levels supported + */ +#define IX_QMGR_NUM_PRIORITY_LEVELS 3 + +/* + * This constant is used to set the size of the array of status words + */ +#define MAX_Q_STATUS_WORDS 4 + +/* + * This macro is used to check if a given priority is valid + */ +#define IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority) \ +(((priority) >= IX_QMGR_Q_PRIORITY_0) && ((priority) <= IX_QMGR_Q_PRIORITY_2)) + +/* + * This macto is used to check that a given interrupt source is valid + */ +#define IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel) \ +(((srcSel) >= IX_QMGR_Q_SOURCE_ID_E) && ((srcSel) <= IX_QMGR_Q_SOURCE_ID_NOT_F)) + +/* + * Number of times a dummy callback is called before logging a trace + * message + */ +#define LOG_THROTTLE_COUNT 1000000 + +/* Priority tables limits */ +#define IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX (0) +#define IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX (16) +#define IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX (31) +#define IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX (32) +#define IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX (48) +#define IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX (63) + +/* + * This macro is used to check if a given callback type is valid + */ +#define IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type) \ + (((type) >= IX_QMGR_TYPE_REALTIME_OTHER) && \ + ((type) <= IX_QMGR_TYPE_REALTIME_SPORADIC)) + +/* + * define max index in lower queue to use in loops + */ +#define IX_QMGR_MAX_LOW_QUE_TABLE_INDEX (31) + +/* + * Typedefs whose scope is limited to this file. + */ + +/* + * Information on a queue needed by the Dispatcher + */ +typedef struct +{ + IxQMgrCallback callback; /* Notification callback */ + IxQMgrCallbackId callbackId; /* Notification callback identifier */ + unsigned dummyCallbackCount; /* Number of times runs of dummy callback */ + IxQMgrPriority priority; /* Dispatch priority */ + unsigned int statusWordOffset; /* Offset to the status word to check */ + UINT32 statusMask; /* Status mask */ + UINT32 statusCheckValue; /* Status check value */ + UINT32 intRegCheckMask; /* Interrupt register check mask */ +} IxQMgrQInfo; + +/* + * Variable declarations global to this file. Externs are followed by + * statics. + */ + +/* + * Flag to keep record of what dispatcher set in featureCtrl when ixQMgrInit() + * is called. This is needed because it is possible that a client might + * change whether the live lock prevention dispatcher is used between + * calls to ixQMgrInit() and ixQMgrDispatcherLoopGet(). + */ +PRIVATE IX_STATUS ixQMgrOrigB0Dispatcher = IX_FEATURE_CTRL_COMPONENT_ENABLED; + +/* + * keep record of Q types - not in IxQMgrQInfo for performance as + * it is only used with ixQMgrDispatcherLoopRunB0LLP() + */ +PRIVATE IxQMgrType ixQMgrQTypes[IX_QMGR_MAX_NUM_QUEUES]; + +/* + * This array contains a list of queue identifiers ordered by priority. The table + * is split logically between queue identifiers 0-31 and 32-63. + */ +static IxQMgrQId priorityTable[IX_QMGR_MAX_NUM_QUEUES]; + +/* + * This flag indicates to the dispatcher that the priority table needs to be rebuilt. + */ +static BOOL rebuildTable = FALSE; + +/* Dispatcher statistics */ +static IxQMgrDispatcherStats dispatcherStats; + +/* Table of queue information */ +static IxQMgrQInfo dispatchQInfo[IX_QMGR_MAX_NUM_QUEUES]; + +/* Masks use to identify the first queues in the priority tables +* when comparing with the interrupt register +*/ +static unsigned int lowPriorityTableFirstHalfMask; +static unsigned int uppPriorityTableFirstHalfMask; + +/* + * Static function prototypes + */ + +/* + * This function is the default callback for all queues + */ +PRIVATE void +dummyCallback (IxQMgrQId qId, + IxQMgrCallbackId cbId); + +PRIVATE void +ixQMgrDispatcherReBuildPriorityTable (void); + +/* + * Function definitions. + */ +void +ixQMgrDispatcherInit (void) +{ + int i; + IxFeatureCtrlProductId productId = 0; + IxFeatureCtrlDeviceId deviceId = 0; + BOOL stickyIntSilicon = TRUE; + + /* Set default priorities */ + for (i=0; i< IX_QMGR_MAX_NUM_QUEUES; i++) + { + dispatchQInfo[i].callback = dummyCallback; + dispatchQInfo[i].callbackId = 0; + dispatchQInfo[i].dummyCallbackCount = 0; + dispatchQInfo[i].priority = IX_QMGR_Q_PRIORITY_2; + dispatchQInfo[i].statusWordOffset = 0; + dispatchQInfo[i].statusCheckValue = 0; + dispatchQInfo[i].statusMask = 0; + /* + * There are two interrupt registers, 32 bits each. One for the lower + * queues(0-31) and one for the upper queues(32-63). Therefore need to + * mod by 32 i.e the min upper queue identifier. + */ + dispatchQInfo[i].intRegCheckMask = (1<<(i%(IX_QMGR_MIN_QUEUPP_QID))); + + /* + * Set the Q types - will only be used with livelock + */ + ixQMgrQTypes[i] = IX_QMGR_TYPE_REALTIME_OTHER; + + /* Reset queue statistics */ + dispatcherStats.queueStats[i].callbackCnt = 0; + dispatcherStats.queueStats[i].priorityChangeCnt = 0; + dispatcherStats.queueStats[i].intNoCallbackCnt = 0; + dispatcherStats.queueStats[i].intLostCallbackCnt = 0; + dispatcherStats.queueStats[i].notificationEnabled = FALSE; + dispatcherStats.queueStats[i].srcSel = 0; + + } + + /* Priority table. Order the table from queue 0 to 63 */ + ixQMgrDispatcherReBuildPriorityTable(); + + /* Reset statistics */ + dispatcherStats.loopRunCnt = 0; + + /* Get the device ID for the underlying silicon */ + deviceId = ixFeatureCtrlDeviceRead(); + + /* Get the product ID for the underlying silicon */ + productId = ixFeatureCtrlProductIdRead(); + + /* + * Check featureCtrl to see if Livelock prevention is required + */ + ixQMgrOrigB0Dispatcher = ixFeatureCtrlSwConfigurationCheck( + IX_FEATURECTRL_ORIGB0_DISPATCHER); + + /* + * Check if the silicon supports the sticky interrupt feature. + * IF (IXP42X AND A0) -> No sticky interrupt feature supported + */ + if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X == + (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) && + (IX_FEATURE_CTRL_SILICON_TYPE_A0 == + (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId))) + { + stickyIntSilicon = FALSE; + } + + /* + * IF user wants livelock prev option AND silicon supports sticky interrupt + * feature -> enable the sticky interrupt bit + */ + if ((IX_FEATURE_CTRL_SWCONFIG_DISABLED == ixQMgrOrigB0Dispatcher) && + stickyIntSilicon) + { + ixQMgrStickyInterruptRegEnable(); + } +} + +IX_STATUS +ixQMgrDispatcherPrioritySet (IxQMgrQId qId, + IxQMgrPriority priority) +{ + int ixQMgrLockKey; + + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + if (!IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority)) + { + return IX_QMGR_Q_INVALID_PRIORITY; + } + + ixQMgrLockKey = ixOsalIrqLock(); + + /* Change priority */ + dispatchQInfo[qId].priority = priority; + /* Set flag */ + rebuildTable = TRUE; + + ixOsalIrqUnlock(ixQMgrLockKey); + +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qId].priorityChangeCnt++; +#endif + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrNotificationCallbackSet (IxQMgrQId qId, + IxQMgrCallback callback, + IxQMgrCallbackId callbackId) +{ + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + if (NULL == callback) + { + /* Reset to dummy callback */ + dispatchQInfo[qId].callback = dummyCallback; + dispatchQInfo[qId].dummyCallbackCount = 0; + dispatchQInfo[qId].callbackId = 0; + } + else + { + dispatchQInfo[qId].callback = callback; + dispatchQInfo[qId].callbackId = callbackId; + } + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrNotificationEnable (IxQMgrQId qId, + IxQMgrSourceId srcSel) +{ + IxQMgrQStatus qStatusOnEntry;/* The queue status on entry/exit */ + IxQMgrQStatus qStatusOnExit; /* to this function */ + int ixQMgrLockKey; + +#ifndef NDEBUG + if (!ixQMgrQIsConfigured (qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + if ((qId < IX_QMGR_MIN_QUEUPP_QID) && + !IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel)) + { + /* QId 0-31 source id invalid */ + return IX_QMGR_INVALID_INT_SOURCE_ID; + } + + if ((IX_QMGR_Q_SOURCE_ID_NE != srcSel) && + (qId >= IX_QMGR_MIN_QUEUPP_QID)) + { + /* + * For queues 32-63 the interrupt source is fixed to the Nearly + * Empty status flag and therefore should have a srcSel of NE. + */ + return IX_QMGR_INVALID_INT_SOURCE_ID; + } +#endif + +#ifndef NDEBUG + dispatcherStats.queueStats[qId].notificationEnabled = TRUE; + dispatcherStats.queueStats[qId].srcSel = srcSel; +#endif + + /* Get the current queue status */ + ixQMgrAqmIfQueStatRead (qId, &qStatusOnEntry); + + /* + * Enabling interrupts results in Read-Modify-Write + * so need critical section + */ + + ixQMgrLockKey = ixOsalIrqLock(); + + /* Calculate the checkMask and checkValue for this q */ + ixQMgrAqmIfQStatusCheckValsCalc (qId, + srcSel, + &dispatchQInfo[qId].statusWordOffset, + &dispatchQInfo[qId].statusCheckValue, + &dispatchQInfo[qId].statusMask); + + + /* Set the interupt source is this queue is in the range 0-31 */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + ixQMgrAqmIfIntSrcSelWrite (qId, srcSel); + } + + /* Enable the interrupt */ + ixQMgrAqmIfQInterruptEnable (qId); + + ixOsalIrqUnlock(ixQMgrLockKey); + + /* Get the current queue status */ + ixQMgrAqmIfQueStatRead (qId, &qStatusOnExit); + + /* If the status has changed return a warning */ + if (qStatusOnEntry != qStatusOnExit) + { + return IX_QMGR_WARNING; + } + + return IX_SUCCESS; +} + + +IX_STATUS +ixQMgrNotificationDisable (IxQMgrQId qId) +{ + int ixQMgrLockKey; + +#ifndef NDEBUG + /* Validate parameters */ + if (!ixQMgrQIsConfigured (qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } +#endif + + /* + * Enabling interrupts results in Read-Modify-Write + * so need critical section + */ +#ifndef NDEBUG + dispatcherStats.queueStats[qId].notificationEnabled = FALSE; +#endif + + ixQMgrLockKey = ixOsalIrqLock(); + + ixQMgrAqmIfQInterruptDisable (qId); + + ixOsalIrqUnlock(ixQMgrLockKey); + + return IX_SUCCESS; +} + +void +ixQMgrStickyInterruptRegEnable(void) +{ + /* Use Aqm If function to set Interrupt Register0 Bit-3 */ + ixQMgrAqmIfIntSrcSelReg0Bit3Set (); +} + +#if !defined __XSCALE__ || defined __linux + +/* Count the number of leading zero bits in a word, + * and return the same value than the CLZ instruction. + * + * word (in) return value (out) + * 0x80000000 0 + * 0x40000000 1 + * ,,, ,,, + * 0x00000002 30 + * 0x00000001 31 + * 0x00000000 32 + * + * The C version of this function is used as a replacement + * for system not providing the equivalent of the CLZ + * assembly language instruction. + * + * Note that this version is big-endian + */ +unsigned int +ixQMgrCountLeadingZeros(UINT32 word) +{ + unsigned int leadingZerosCount = 0; + + if (word == 0) + { + return 32; + } + /* search the first bit set by testing the MSB and shifting the input word */ + while ((word & 0x80000000) == 0) + { + word <<= 1; + leadingZerosCount++; + } + return leadingZerosCount; +} +#endif /* not __XSCALE__ or __linux */ + +void +ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr) +{ + IxFeatureCtrlProductId productId = 0; + IxFeatureCtrlDeviceId deviceId = 0; + + /* Get the device ID for the underlying silicon */ + deviceId = ixFeatureCtrlDeviceRead(); + + /* Get the product ID for the underlying silicon */ + productId = ixFeatureCtrlProductIdRead (); + + /* IF (IXP42X AND A0 silicon) -> use ixQMgrDispatcherLoopRunA0 */ + if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X == + (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) && + (IX_FEATURE_CTRL_SILICON_TYPE_A0 == + (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId))) + { + /*For IXP42X A0 silicon */ + *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunA0 ; + } + else /*For IXP42X B0 or IXP46X silicon*/ + { + if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == ixQMgrOrigB0Dispatcher) + { + /* Default for IXP42X B0 and IXP46X silicon */ + *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0; + } + else + { + /* FeatureCtrl indicated that livelock dispatcher be used */ + *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0LLP; + } + } +} + +void +ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group) +{ + UINT32 intRegVal; /* Interrupt reg val */ + UINT32 intRegValAfterWrite; /* Interrupt reg val after writing back */ + UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ + UINT32 qStatusWordsB4Write[MAX_Q_STATUS_WORDS]; /* Status b4 interrupt write */ + UINT32 qStatusWordsAfterWrite[MAX_Q_STATUS_WORDS]; /* Status after interrupt write */ + IxQMgrQInfo *currDispatchQInfo; + BOOL statusChangeFlag; + + int priorityTableIndex;/* Priority table index */ + int qIndex; /* Current queue being processed */ + int endIndex; /* Index of last queue to process */ + +#ifndef NDEBUG + IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || + (group == IX_QMGR_QUELOW_GROUP)); +#endif + + /* Read Q status registers before interrupt status read/write */ + ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsB4Write); + + /* Read the interrupt register */ + ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); + + /* No bit set : nothing to process (the reaminder of the algorithm is + * based on the fact that the interrupt register value contains at + * least one bit set + */ + if (intRegVal == 0) + { +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.loopRunCnt++; +#endif + + /* Rebuild the priority table if needed */ + if (rebuildTable) + { + ixQMgrDispatcherReBuildPriorityTable (); + } + + return; + } + + /* Write it back to clear the interrupt */ + ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); + + /* Read Q status registers after interrupt status read/write */ + ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsAfterWrite); + + /* get the first queue Id from the interrupt register value */ + qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); + + /* check if any change occured during hw register modifications */ + if (IX_QMGR_QUELOW_GROUP == group) + { + statusChangeFlag = + (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]) || + (qStatusWordsB4Write[1] != qStatusWordsAfterWrite[1]) || + (qStatusWordsB4Write[2] != qStatusWordsAfterWrite[2]) || + (qStatusWordsB4Write[3] != qStatusWordsAfterWrite[3]); + } + else + { + statusChangeFlag = + (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]); + /* Set the queue range based on the queue group to proccess */ + qIndex += IX_QMGR_MIN_QUEUPP_QID; + } + + if (statusChangeFlag == FALSE) + { + /* check if the interrupt register contains + * only 1 bit set (happy day scenario) + */ + currDispatchQInfo = &dispatchQInfo[qIndex]; + if (intRegVal == currDispatchQInfo->intRegCheckMask) + { + /* only 1 queue event triggered a notification * + * Call the callback function for this queue + */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + } + else + { + /* the event is triggered by more than 1 queue, + * the queue search will be starting from the beginning + * or the middle of the priority table + * + * the serach will end when all the bits of the interrupt + * register are cleared. There is no need to maintain + * a seperate value and test it at each iteration. + */ + if (IX_QMGR_QUELOW_GROUP == group) + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & lowPriorityTableFirstHalfMask) + { + priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; + } + } + else + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & uppPriorityTableFirstHalfMask) + { + priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; + } + } + + /* iterate following the priority table until all the bits + * of the interrupt register are cleared. + */ + do + { + qIndex = priorityTable[priorityTableIndex++]; + currDispatchQInfo = &dispatchQInfo[qIndex]; + intRegCheckMask = currDispatchQInfo->intRegCheckMask; + + /* If this queue caused this interrupt to be raised */ + if (intRegVal & intRegCheckMask) + { + /* Call the callback function for this queue */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + + /* Clear the interrupt register bit */ + intRegVal &= ~intRegCheckMask; + } + } + while(intRegVal); + } + } + else + { + /* A change in queue status occured during the hw interrupt + * register update. To maintain the interrupt consistency, it + * is necessary to iterate through all queues of the queue group. + */ + + /* Read interrupt status again */ + ixQMgrAqmIfQInterruptRegRead (group, &intRegValAfterWrite); + + if (IX_QMGR_QUELOW_GROUP == group) + { + priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + endIndex = IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + endIndex = IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX; + } + + for ( ; priorityTableIndex<=endIndex; priorityTableIndex++) + { + qIndex = priorityTable[priorityTableIndex]; + currDispatchQInfo = &dispatchQInfo[qIndex]; + intRegCheckMask = currDispatchQInfo->intRegCheckMask; + + /* If this queue caused this interrupt to be raised */ + if (intRegVal & intRegCheckMask) + { + /* Call the callback function for this queue */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + + } /* if (intRegVal .. */ + + /* + * If interrupt bit is set in intRegValAfterWrite don't + * proceed as this will be caught in next interrupt + */ + else if ((intRegValAfterWrite & intRegCheckMask) == 0) + { + /* Check if an interrupt was lost for this Q */ + if (ixQMgrAqmIfQStatusCheck(qStatusWordsB4Write, + qStatusWordsAfterWrite, + currDispatchQInfo->statusWordOffset, + currDispatchQInfo->statusCheckValue, + currDispatchQInfo->statusMask)) + { + /* Call the callback function for this queue */ + currDispatchQInfo->callback (qIndex, + dispatchQInfo[qIndex].callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; + dispatcherStats.queueStats[qIndex].intLostCallbackCnt++; +#endif + } /* if ixQMgrAqmIfQStatusCheck(.. */ + } /* else if ((intRegValAfterWrite ... */ + } /* for (priorityTableIndex=0 ... */ + } + + /* Rebuild the priority table if needed */ + if (rebuildTable) + { + ixQMgrDispatcherReBuildPriorityTable (); + } + +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.loopRunCnt++; +#endif +} + + + +void +ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group) +{ + UINT32 intRegVal; /* Interrupt reg val */ + UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ + IxQMgrQInfo *currDispatchQInfo; + + + int priorityTableIndex; /* Priority table index */ + int qIndex; /* Current queue being processed */ + +#ifndef NDEBUG + IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || + (group == IX_QMGR_QUELOW_GROUP)); + IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || + (group == IX_QMGR_QUELOW_GROUP)); +#endif + + /* Read the interrupt register */ + ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); + + + /* No queue has interrupt register set */ + if (intRegVal != 0) + { + + /* Write it back to clear the interrupt */ + ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); + + /* get the first queue Id from the interrupt register value */ + qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); + + if (IX_QMGR_QUEUPP_GROUP == group) + { + /* Set the queue range based on the queue group to proccess */ + qIndex += IX_QMGR_MIN_QUEUPP_QID; + } + + /* check if the interrupt register contains + * only 1 bit set + * For example: + * intRegVal = 0x0010 + * currDispatchQInfo->intRegCheckMask = 0x0010 + * intRegVal == currDispatchQInfo->intRegCheckMask is TRUE. + */ + currDispatchQInfo = &dispatchQInfo[qIndex]; + if (intRegVal == currDispatchQInfo->intRegCheckMask) + { + /* only 1 queue event triggered a notification * + * Call the callback function for this queue + */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + } + else + { + /* the event is triggered by more than 1 queue, + * the queue search will be starting from the beginning + * or the middle of the priority table + * + * the serach will end when all the bits of the interrupt + * register are cleared. There is no need to maintain + * a seperate value and test it at each iteration. + */ + if (IX_QMGR_QUELOW_GROUP == group) + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & lowPriorityTableFirstHalfMask) + { + priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; + } + } + else + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & uppPriorityTableFirstHalfMask) + { + priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; + } + } + + /* iterate following the priority table until all the bits + * of the interrupt register are cleared. + */ + do + { + qIndex = priorityTable[priorityTableIndex++]; + currDispatchQInfo = &dispatchQInfo[qIndex]; + intRegCheckMask = currDispatchQInfo->intRegCheckMask; + + /* If this queue caused this interrupt to be raised */ + if (intRegVal & intRegCheckMask) + { + /* Call the callback function for this queue */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + + /* Clear the interrupt register bit */ + intRegVal &= ~intRegCheckMask; + } + } + while(intRegVal); + } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */ + } /* End of intRegVal != 0 */ + +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.loopRunCnt++; +#endif + + /* Rebuild the priority table if needed */ + if (rebuildTable) + { + ixQMgrDispatcherReBuildPriorityTable (); + } +} + +void +ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group) +{ + UINT32 intRegVal =0; /* Interrupt reg val */ + UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ + IxQMgrQInfo *currDispatchQInfo; + + int priorityTableIndex; /* Priority table index */ + int qIndex; /* Current queue being processed */ + + UINT32 intRegValCopy = 0; + UINT32 intEnableRegVal = 0; + UINT8 i = 0; + +#ifndef NDEBUG + IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || + (group == IX_QMGR_QUELOW_GROUP)); +#endif + + /* Read the interrupt register */ + ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); + + /* + * mask any interrupts that are not enabled + */ + ixQMgrAqmIfQInterruptEnableRegRead (group, &intEnableRegVal); + intRegVal &= intEnableRegVal; + + /* No queue has interrupt register set */ + if (intRegVal != 0) + { + if (IX_QMGR_QUELOW_GROUP == group) + { + /* + * As the sticky bit is set, the interrupt register will + * not clear if write back at this point because the condition + * has not been cleared. Take a copy and write back later after + * the condition has been cleared + */ + intRegValCopy = intRegVal; + } + else + { + /* no sticky for upper Q's, so write back now */ + ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); + } + + /* get the first queue Id from the interrupt register value */ + qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); + + if (IX_QMGR_QUEUPP_GROUP == group) + { + /* Set the queue range based on the queue group to proccess */ + qIndex += IX_QMGR_MIN_QUEUPP_QID; + } + + /* check if the interrupt register contains + * only 1 bit set + * For example: + * intRegVal = 0x0010 + * currDispatchQInfo->intRegCheckMask = 0x0010 + * intRegVal == currDispatchQInfo->intRegCheckMask is TRUE. + */ + currDispatchQInfo = &dispatchQInfo[qIndex]; + if (intRegVal == currDispatchQInfo->intRegCheckMask) + { + + /* + * check if Q type periodic - only lower queues can + * have there type set to periodic + */ + if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex]) + { + /* + * Disable the notifications on any sporadics + */ + for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) + { + if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i]) + { + ixQMgrNotificationDisable(i); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[i].disableCount++; +#endif + } + } + } + + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + } + else + { + /* the event is triggered by more than 1 queue, + * the queue search will be starting from the beginning + * or the middle of the priority table + * + * the serach will end when all the bits of the interrupt + * register are cleared. There is no need to maintain + * a seperate value and test it at each iteration. + */ + if (IX_QMGR_QUELOW_GROUP == group) + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & lowPriorityTableFirstHalfMask) + { + priorityTableIndex = + IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = + IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; + } + } + else + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & uppPriorityTableFirstHalfMask) + { + priorityTableIndex = + IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = + IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; + } + } + + /* iterate following the priority table until all the bits + * of the interrupt register are cleared. + */ + do + { + qIndex = priorityTable[priorityTableIndex++]; + currDispatchQInfo = &dispatchQInfo[qIndex]; + intRegCheckMask = currDispatchQInfo->intRegCheckMask; + + /* If this queue caused this interrupt to be raised */ + if (intRegVal & intRegCheckMask) + { + /* + * check if Q type periodic - only lower queues can + * have there type set to periodic. There can only be one + * periodic queue, so the sporadics are only disabled once. + */ + if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex]) + { + /* + * Disable the notifications on any sporadics + */ + for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) + { + if (IX_QMGR_TYPE_REALTIME_SPORADIC == + ixQMgrQTypes[i]) + { + ixQMgrNotificationDisable(i); + /* + * remove from intRegVal as we don't want + * to service any sporadics now + */ + intRegVal &= ~dispatchQInfo[i].intRegCheckMask; +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[i].disableCount++; +#endif + } + } + } + + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + /* Clear the interrupt register bit */ + intRegVal &= ~intRegCheckMask; + } + } + while(intRegVal); + } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */ + } /* End of intRegVal != 0 */ + +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.loopRunCnt++; +#endif + + if ((intRegValCopy != 0) && (IX_QMGR_QUELOW_GROUP == group)) + { + /* + * lower groups (therefore sticky) AND at least one enabled interrupt + * Write back to clear the interrupt + */ + ixQMgrAqmIfQInterruptRegWrite (IX_QMGR_QUELOW_GROUP, intRegValCopy); + } + + /* Rebuild the priority table if needed */ + if (rebuildTable) + { + ixQMgrDispatcherReBuildPriorityTable (); + } +} + +PRIVATE void +ixQMgrDispatcherReBuildPriorityTable (void) +{ + UINT32 qIndex; + UINT32 priority; + int lowQuePriorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + int uppQuePriorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + + /* Reset the rebuild flag */ + rebuildTable = FALSE; + + /* initialize the mak used to identify the queues in the first half + * of the priority table + */ + lowPriorityTableFirstHalfMask = 0; + uppPriorityTableFirstHalfMask = 0; + + /* For each priority level */ + for(priority=0; priority dummyCallback: qId (%d), callbackId (%d)\n",qId,cbId); + } + dispatchQInfo[qId].dummyCallbackCount++; + +#ifndef NDEBUG + /* Update statistcs */ + dispatcherStats.queueStats[qId].intNoCallbackCnt++; +#endif +} +void +ixQMgrLLPShow (int resetStats) +{ +#ifndef NDEBUG + UINT8 i = 0; + IxQMgrQInfo *q; + UINT32 intEnableRegVal = 0; + + printf ("Livelock statistics are printed on the fly.\n"); + printf ("qId Type EnableCnt DisableCnt IntEnableState Callbacks\n"); + printf ("=== ======== ========= ========== ============== =========\n"); + + for (i=0; i<= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) + { + q = &dispatchQInfo[i]; + + if (ixQMgrQTypes[i] != IX_QMGR_TYPE_REALTIME_OTHER) + { + printf (" %2d ", i); + + if (ixQMgrQTypes[i] == IX_QMGR_TYPE_REALTIME_SPORADIC) + { + printf ("Sporadic"); + } + else + { + printf ("Periodic"); + } + + + ixQMgrAqmIfQInterruptEnableRegRead (IX_QMGR_QUELOW_GROUP, + &intEnableRegVal); + + + intEnableRegVal &= dispatchQInfo[i].intRegCheckMask; + intEnableRegVal = intEnableRegVal >> i; + + printf (" %10d %10d %10d %10d\n", + dispatcherStats.queueStats[i].enableCount, + dispatcherStats.queueStats[i].disableCount, + intEnableRegVal, + dispatcherStats.queueStats[i].callbackCnt); + + if (resetStats) + { + dispatcherStats.queueStats[i].enableCount = + dispatcherStats.queueStats[i].disableCount = + dispatcherStats.queueStats[i].callbackCnt = 0; + } + } + } +#else + IX_QMGR_LOG0("Livelock Prevention statistics are only collected in debug mode\n"); +#endif +} + +void +ixQMgrPeriodicDone (void) +{ + UINT32 i = 0; + UINT32 ixQMgrLockKey = 0; + + /* + * for the lower queues + */ + for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) + { + /* + * check for sporadics + */ + if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i]) + { + /* + * enable any sporadics + */ + ixQMgrLockKey = ixOsalIrqLock(); + ixQMgrAqmIfQInterruptEnable(i); + ixOsalIrqUnlock(ixQMgrLockKey); +#ifndef NDEBUG + /* + * Update statistics + */ + dispatcherStats.queueStats[i].enableCount++; + dispatcherStats.queueStats[i].notificationEnabled = TRUE; +#endif + } + } +} +IX_STATUS +ixQMgrCallbackTypeSet (IxQMgrQId qId, + IxQMgrType type) +{ + UINT32 ixQMgrLockKey = 0; + IxQMgrType ixQMgrOldType =0; + +#ifndef NDEBUG + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + if (qId >= IX_QMGR_MIN_QUEUPP_QID) + { + return IX_QMGR_PARAMETER_ERROR; + } + if(!IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type)) + { + return IX_QMGR_PARAMETER_ERROR; + } +#endif + + ixQMgrOldType = ixQMgrQTypes[qId]; + ixQMgrQTypes[qId] = type; + + /* + * check if Q has been changed from type SPORADIC + */ + if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrOldType) + { + /* + * previously Q was a SPORADIC, this means that LLP + * might have had it disabled. enable it now. + */ + ixQMgrLockKey = ixOsalIrqLock(); + ixQMgrAqmIfQInterruptEnable(qId); + ixOsalIrqUnlock(ixQMgrLockKey); + +#ifndef NDEBUG + /* + * Update statistics + */ + dispatcherStats.queueStats[qId].enableCount++; +#endif + } + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrCallbackTypeGet (IxQMgrQId qId, + IxQMgrType *type) +{ +#ifndef NDEBUG + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + if (qId >= IX_QMGR_MIN_QUEUPP_QID) + { + return IX_QMGR_PARAMETER_ERROR; + } + if(type == NULL) + { + return IX_QMGR_PARAMETER_ERROR; + } +#endif + + *type = ixQMgrQTypes[qId]; + return IX_SUCCESS; +} -- cgit v1.1