From ea0364f1bbfed1e3ea711147420875cf338fe77a Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 12 Apr 2010 22:28:04 -0500 Subject: Move lib_$ARCH directories to arch/$ARCH/lib Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk This change is intended to clean up the top-level directory structure and more closely mimic Linux's directory organization. Signed-off-by: Peter Tyser --- arch/mips/config.mk | 52 +++++ arch/mips/lib/Makefile | 51 +++++ arch/mips/lib/board.c | 436 ++++++++++++++++++++++++++++++++++++++++ arch/mips/lib/bootm.c | 174 ++++++++++++++++ arch/mips/lib/bootm_qemu_mips.c | 76 +++++++ arch/mips/lib/time.c | 98 +++++++++ 6 files changed, 887 insertions(+) create mode 100644 arch/mips/config.mk create mode 100644 arch/mips/lib/Makefile create mode 100644 arch/mips/lib/board.c create mode 100644 arch/mips/lib/bootm.c create mode 100644 arch/mips/lib/bootm_qemu_mips.c create mode 100644 arch/mips/lib/time.c (limited to 'arch/mips') diff --git a/arch/mips/config.mk b/arch/mips/config.mk new file mode 100644 index 0000000..aa06761 --- /dev/null +++ b/arch/mips/config.mk @@ -0,0 +1,52 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +CROSS_COMPILE ?= mips_4KC- + +STANDALONE_LOAD_ADDR = 0x80200000 -T mips.lds + +PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ + +# +# From Linux arch/mips/Makefile +# +# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel +# code since it only slows down the whole thing. At some point we might make +# use of global pointer optimizations but their use of $28 conflicts with +# the current pointer optimization. +# +# The DECStation requires an ECOFF kernel for remote booting, other MIPS +# machines may also. Since BFD is incredibly buggy with respect to +# crossformat linking we rely on the elf2ecoff tool for format conversion. +# +# cflags-y += -G 0 -mno-abicalls -fno-pic -pipe +# cflags-y += -msoft-float +# LDFLAGS_vmlinux += -G 0 -static -n -nostdlib +# MODFLAGS += -mlong-calls +# +# On the other hand, we want PIC in the U-Boot code to relocate it from ROM +# to RAM. $28 is always used as gp. +# +PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic +PLATFORM_CPPFLAGS += -msoft-float +PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile new file mode 100644 index 0000000..7967e58 --- /dev/null +++ b/arch/mips/lib/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(ARCH).a + +SOBJS-y += + +COBJS-y += board.o +ifeq ($(CONFIG_QEMU_MIPS),y) +COBJS-y += bootm_qemu_mips.o +else +COBJS-y += bootm.o +endif +COBJS-y += time.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c new file mode 100644 index 0000000..b2d113e --- /dev/null +++ b/arch/mips/lib/board.c @@ -0,0 +1,436 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_BITBANGMII +#include +#endif + +DECLARE_GLOBAL_DATA_PTR; + +#if ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ + (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ + defined(CONFIG_ENV_IS_IN_NVRAM) +#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) +#else +#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN +#endif + +#undef DEBUG + +extern int timer_init(void); + +extern int incaip_set_cpuclk(void); + +extern ulong uboot_end_data; +extern ulong uboot_end; + +ulong monitor_flash_len; + +const char version_string[] = + U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"; + +static char *failed = "*** failed ***\n"; + +/* + * mips_io_port_base is the begin of the address space to which x86 style + * I/O ports are mapped. + */ +unsigned long mips_io_port_base = -1; + +int __board_early_init_f(void) +{ + /* + * Nothing to do in this dummy implementation + */ + return 0; +} +int board_early_init_f(void) __attribute__((weak, alias("__board_early_init_f"))); + + +static int init_func_ram (void) +{ +#ifdef CONFIG_BOARD_TYPES + int board_type = gd->board_type; +#else + int board_type = 0; /* use dummy arg */ +#endif + puts ("DRAM: "); + + if ((gd->ram_size = initdram (board_type)) > 0) { + print_size (gd->ram_size, "\n"); + return (0); + } + puts (failed); + return (1); +} + +static int display_banner(void) +{ + + printf ("\n\n%s\n\n", version_string); + return (0); +} + +#ifndef CONFIG_SYS_NO_FLASH +static void display_flash_config(ulong size) +{ + puts ("Flash: "); + print_size (size, "\n"); +} +#endif + +static int init_baudrate (void) +{ + char tmp[64]; /* long enough for environment variables */ + int i = getenv_r ("baudrate", tmp, sizeof (tmp)); + + gd->baudrate = (i > 0) + ? (int) simple_strtoul (tmp, NULL, 10) + : CONFIG_BAUDRATE; + + return (0); +} + + +/* + * Breath some life into the board... + * + * The first part of initialization is running from Flash memory; + * its main purpose is to initialize the RAM so that we + * can relocate the monitor code to RAM. + */ + +/* + * All attempts to come up with a "common" initialization sequence + * that works for all boards and architectures failed: some of the + * requirements are just _too_ different. To get rid of the resulting + * mess of board dependend #ifdef'ed code we now make the whole + * initialization sequence configurable to the user. + * + * The requirements for any new initalization function is simple: it + * receives a pointer to the "global data" structure as it's only + * argument, and returns an integer return code, where 0 means + * "continue" and != 0 means "fatal error, hang the system". + */ +typedef int (init_fnc_t) (void); + +init_fnc_t *init_sequence[] = { + board_early_init_f, + timer_init, + env_init, /* initialize environment */ +#ifdef CONFIG_INCA_IP + incaip_set_cpuclk, /* set cpu clock according to environment variable */ +#endif + init_baudrate, /* initialze baudrate settings */ + serial_init, /* serial communications setup */ + console_init_f, + display_banner, /* say that we are here */ + checkboard, + init_func_ram, + NULL, +}; + + +void board_init_f(ulong bootflag) +{ + gd_t gd_data, *id; + bd_t *bd; + init_fnc_t **init_fnc_ptr; + ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE; + ulong *s; +#ifdef CONFIG_PURPLE + void copy_code (ulong); +#endif + + /* Pointer is writable since we allocated a register for it. + */ + gd = &gd_data; + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("": : :"memory"); + + memset ((void *)gd, 0, sizeof (gd_t)); + + for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { + if ((*init_fnc_ptr)() != 0) { + hang (); + } + } + + /* + * Now that we have DRAM mapped and working, we can + * relocate the code and continue running from DRAM. + */ + addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size; + + /* We can reserve some RAM "on top" here. + */ + + /* round down to next 4 kB limit. + */ + addr &= ~(4096 - 1); + debug ("Top of RAM usable for U-Boot at: %08lx\n", addr); + + /* Reserve memory for U-Boot code, data & bss + * round down to next 16 kB limit + */ + addr -= len; + addr &= ~(16 * 1024 - 1); + + debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); + + /* Reserve memory for malloc() arena. + */ + addr_sp = addr - TOTAL_MALLOC_LEN; + debug ("Reserving %dk for malloc() at: %08lx\n", + TOTAL_MALLOC_LEN >> 10, addr_sp); + + /* + * (permanently) allocate a Board Info struct + * and a permanent copy of the "global" data + */ + addr_sp -= sizeof(bd_t); + bd = (bd_t *)addr_sp; + gd->bd = bd; + debug ("Reserving %zu Bytes for Board Info at: %08lx\n", + sizeof(bd_t), addr_sp); + + addr_sp -= sizeof(gd_t); + id = (gd_t *)addr_sp; + debug ("Reserving %zu Bytes for Global Data at: %08lx\n", + sizeof (gd_t), addr_sp); + + /* Reserve memory for boot params. + */ + addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN; + bd->bi_boot_params = addr_sp; + debug ("Reserving %dk for boot params() at: %08lx\n", + CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp); + + /* + * Finally, we set up a new (bigger) stack. + * + * Leave some safety gap for SP, force alignment on 16 byte boundary + * Clear initial stack frame + */ + addr_sp -= 16; + addr_sp &= ~0xF; + s = (ulong *)addr_sp; + *s-- = 0; + *s-- = 0; + addr_sp = (ulong)s; + debug ("Stack Pointer at: %08lx\n", addr_sp); + + /* + * Save local variables to board info struct + */ + bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */ + bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ + bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ + + memcpy (id, (void *)gd, sizeof (gd_t)); + + /* On the purple board we copy the code in a special way + * in order to solve flash problems + */ +#ifdef CONFIG_PURPLE + copy_code(addr); +#endif + + relocate_code (addr_sp, id, addr); + + /* NOTREACHED - relocate_code() does not return */ +} +/************************************************************************ + * + * This is the next part if the initialization sequence: we are now + * running from RAM and have a "normal" C environment, i. e. global + * data can be written, BSS has been cleared, the stack size in not + * that critical any more, etc. + * + ************************************************************************ + */ + +void board_init_r (gd_t *id, ulong dest_addr) +{ + cmd_tbl_t *cmdtp; +#ifndef CONFIG_SYS_NO_FLASH + ulong size; +#endif + extern void malloc_bin_reloc (void); +#ifndef CONFIG_ENV_IS_NOWHERE + extern char * env_name_spec; +#endif + char *s; + bd_t *bd; + + gd = id; + gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ + + debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); + + gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; + + monitor_flash_len = (ulong)&uboot_end_data - dest_addr; + + /* + * We have to relocate the command table manually + */ + for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) { + ulong addr; + + addr = (ulong) (cmdtp->cmd) + gd->reloc_off; +#if 0 + printf ("Command \"%s\": 0x%08lx => 0x%08lx\n", + cmdtp->name, (ulong) (cmdtp->cmd), addr); +#endif + cmdtp->cmd = + (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr; + + addr = (ulong)(cmdtp->name) + gd->reloc_off; + cmdtp->name = (char *)addr; + + if (cmdtp->usage) { + addr = (ulong)(cmdtp->usage) + gd->reloc_off; + cmdtp->usage = (char *)addr; + } +#ifdef CONFIG_SYS_LONGHELP + if (cmdtp->help) { + addr = (ulong)(cmdtp->help) + gd->reloc_off; + cmdtp->help = (char *)addr; + } +#endif + } + /* there are some other pointer constants we must deal with */ +#ifndef CONFIG_ENV_IS_NOWHERE + env_name_spec += gd->reloc_off; +#endif + + bd = gd->bd; + + /* The Malloc area is immediately below the monitor copy in DRAM */ + mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off - + TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN); + malloc_bin_reloc(); + +#ifndef CONFIG_SYS_NO_FLASH + /* configure available FLASH banks */ + size = flash_init(); + display_flash_config (size); + bd->bi_flashsize = size; +#endif + + bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; +#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE + bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */ +#else + bd->bi_flashoffset = 0; +#endif + +#ifdef CONFIG_CMD_NAND + puts ("NAND: "); + nand_init (); /* go init the NAND */ +#endif + +#if defined(CONFIG_CMD_ONENAND) + onenand_init(); +#endif + + /* relocate environment function pointers etc. */ + env_relocate(); + + /* IP Address */ + bd->bi_ip_addr = getenv_IPaddr("ipaddr"); + +#if defined(CONFIG_PCI) + /* + * Do pci configuration + */ + pci_init(); +#endif + +/** leave this here (after malloc(), environment and PCI are working) **/ + /* Initialize stdio devices */ + stdio_init (); + + jumptable_init (); + + /* Initialize the console (after the relocation and devices init) */ + console_init_r (); +/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/ + + /* Initialize from environment */ + if ((s = getenv ("loadaddr")) != NULL) { + load_addr = simple_strtoul (s, NULL, 16); + } +#if defined(CONFIG_CMD_NET) + if ((s = getenv ("bootfile")) != NULL) { + copy_filename (BootFile, s, sizeof (BootFile)); + } +#endif + +#ifdef CONFIG_CMD_SPI + puts ("SPI: "); + spi_init (); /* go init the SPI */ + puts ("ready\n"); +#endif + +#if defined(CONFIG_MISC_INIT_R) + /* miscellaneous platform dependent initialisations */ + misc_init_r (); +#endif + +#ifdef CONFIG_BITBANGMII + bb_miiphy_init(); +#endif +#if defined(CONFIG_CMD_NET) +#if defined(CONFIG_NET_MULTI) + puts ("Net: "); +#endif + eth_initialize(gd->bd); +#endif + + /* main_loop() can return to retry autoboot, if so just run it again. */ + for (;;) { + main_loop (); + } + + /* NOTREACHED - no way out of command loop except booting */ +} + +void hang (void) +{ + puts ("### ERROR ### Please RESET the board ###\n"); + for (;;); +} diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c new file mode 100644 index 0000000..54af24c --- /dev/null +++ b/arch/mips/lib/bootm.c @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define LINUX_MAX_ENVS 256 +#define LINUX_MAX_ARGS 256 + +static int linux_argc; +static char ** linux_argv; + +static char ** linux_env; +static char * linux_env_p; +static int linux_env_idx; + +static void linux_params_init (ulong start, char * commandline); +static void linux_env_set (char * env_name, char * env_val); + +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +{ + void (*theKernel) (int, char **, char **, int *); + char *commandline = getenv ("bootargs"); + char env_buf[12]; + char *cp; + + if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) + return 1; + + /* find kernel entry point */ + theKernel = (void (*)(int, char **, char **, int *))images->ep; + + show_boot_progress (15); + +#ifdef DEBUG + printf ("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) theKernel); +#endif + + linux_params_init (UNCACHED_SDRAM (gd->bd->bi_boot_params), commandline); + +#ifdef CONFIG_MEMSIZE_IN_BYTES + sprintf (env_buf, "%lu", (ulong)gd->ram_size); + debug ("## Giving linux memsize in bytes, %lu\n", (ulong)gd->ram_size); +#else + sprintf (env_buf, "%lu", (ulong)(gd->ram_size >> 20)); + debug ("## Giving linux memsize in MB, %lu\n", (ulong)(gd->ram_size >> 20)); +#endif /* CONFIG_MEMSIZE_IN_BYTES */ + + linux_env_set ("memsize", env_buf); + + sprintf (env_buf, "0x%08X", (uint) UNCACHED_SDRAM (images->rd_start)); + linux_env_set ("initrd_start", env_buf); + + sprintf (env_buf, "0x%X", (uint) (images->rd_end - images->rd_start)); + linux_env_set ("initrd_size", env_buf); + + sprintf (env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); + linux_env_set ("flash_start", env_buf); + + sprintf (env_buf, "0x%X", (uint) (gd->bd->bi_flashsize)); + linux_env_set ("flash_size", env_buf); + + cp = getenv("ethaddr"); + if (cp != NULL) { + linux_env_set("ethaddr", cp); + } + + cp = getenv("eth1addr"); + if (cp != NULL) { + linux_env_set("eth1addr", cp); + } + + /* we assume that the kernel is in place */ + printf ("\nStarting kernel ...\n\n"); + + theKernel (linux_argc, linux_argv, linux_env, 0); + /* does not return */ + return 1; +} + +static void linux_params_init (ulong start, char *line) +{ + char *next, *quote, *argp; + + linux_argc = 1; + linux_argv = (char **) start; + linux_argv[0] = 0; + argp = (char *) (linux_argv + LINUX_MAX_ARGS); + + next = line; + + while (line && *line && linux_argc < LINUX_MAX_ARGS) { + quote = strchr (line, '"'); + next = strchr (line, ' '); + + while (next != NULL && quote != NULL && quote < next) { + /* we found a left quote before the next blank + * now we have to find the matching right quote + */ + next = strchr (quote + 1, '"'); + if (next != NULL) { + quote = strchr (next + 1, '"'); + next = strchr (next + 1, ' '); + } + } + + if (next == NULL) { + next = line + strlen (line); + } + + linux_argv[linux_argc] = argp; + memcpy (argp, line, next - line); + argp[next - line] = 0; + + argp += next - line + 1; + linux_argc++; + + if (*next) + next++; + + line = next; + } + + linux_env = (char **) (((ulong) argp + 15) & ~15); + linux_env[0] = 0; + linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS); + linux_env_idx = 0; +} + +static void linux_env_set (char *env_name, char *env_val) +{ + if (linux_env_idx < LINUX_MAX_ENVS - 1) { + linux_env[linux_env_idx] = linux_env_p; + + strcpy (linux_env_p, env_name); + linux_env_p += strlen (env_name); + + strcpy (linux_env_p, "="); + linux_env_p += 1; + + strcpy (linux_env_p, env_val); + linux_env_p += strlen (env_val); + + linux_env_p++; + linux_env[++linux_env_idx] = 0; + } +} diff --git a/arch/mips/lib/bootm_qemu_mips.c b/arch/mips/lib/bootm_qemu_mips.c new file mode 100644 index 0000000..cc70fa9 --- /dev/null +++ b/arch/mips/lib/bootm_qemu_mips.c @@ -0,0 +1,76 @@ +/* + * (C) Copyright 2008 + * Jean-Christophe PLAGNIOL-VILLARD + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +{ + void (*theKernel) (int, char **, char **, int *); + char *bootargs = getenv ("bootargs"); + char *start; + uint len; + + /* find kernel entry point */ + theKernel = (void (*)(int, char **, char **, int *))images->ep; + + show_boot_progress (15); + + debug ("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) theKernel); + + gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256; + debug ("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params); + + /* set Magic */ + *(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678; + /* set ram_size */ + *(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size; + + start = (char*)gd->bd->bi_boot_params; + + len = strlen(bootargs); + + strncpy(start, bootargs, len + 1); + + start += len; + + len = images->rd_end - images->rd_start; + if (len > 0) { + start += sprintf(start," rd_start=0x%08X rd_size=0x%0X", + (uint) UNCACHED_SDRAM (images->rd_start), + (uint) len); + } + + /* we assume that the kernel is in place */ + printf ("\nStarting kernel ...\n\n"); + + theKernel (0, NULL, NULL, 0); + /* does not return */ + return 1; +} diff --git a/arch/mips/lib/time.c b/arch/mips/lib/time.c new file mode 100644 index 0000000..0e66441 --- /dev/null +++ b/arch/mips/lib/time.c @@ -0,0 +1,98 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +static unsigned long timestamp; + +/* how many counter cycles in a jiffy */ +#define CYCLES_PER_JIFFY (CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ + +/* + * timer without interrupts + */ + +int timer_init(void) +{ + /* Set up the timer for the first expiration. */ + timestamp = 0; + write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY); + + return 0; +} + +void reset_timer(void) +{ + timestamp = 0; + write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY); +} + +ulong get_timer(ulong base) +{ + unsigned int count; + unsigned int expirelo = read_c0_compare(); + + /* Check to see if we have missed any timestamps. */ + count = read_c0_count(); + while ((count - expirelo) < 0x7fffffff) { + expirelo += CYCLES_PER_JIFFY; + timestamp++; + } + write_c0_compare(expirelo); + + return (timestamp - base); +} + +void set_timer(ulong t) +{ + timestamp = t; + write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY); +} + +void __udelay(unsigned long usec) +{ + unsigned int tmo; + + tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000)); + while ((tmo - read_c0_count()) < 0x7fffffff) + /*NOP*/; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On MIPS it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On MIPS it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} -- cgit v1.1